Merge tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some USB fixes for 5.14-rc3 to resolve a bunch of tiny
  problems reported. Included in here are:

   - dtsi revert to resolve a problem which broke android systems that
     relied on the dts name to find the USB controller device.

     People are still working out the "real" solution for this, but for
     now the revert is needed.

   - core USB fix for pipe calculation found by syzbot

   - typec fixes

   - gadget driver fixes

   - new usb-serial device ids

   - new USB quirks

   - xhci fixes

   - usb hub fixes for power management issues reported

   - other tiny fixes

  All have been in linux-next with no reported problems"

* tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
  USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
  Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
  usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set
  Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"
  usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
  usb: dwc2: Skip clock gating on Samsung SoCs
  usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
  usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.
  usb: phy: Fix page fault from usb_phy_uevent
  usb: xhci: avoid renesas_usb_fw.mem when it's unusable
  usb: gadget: u_serial: remove WARN_ON on null port
  usb: dwc3: avoid NULL access of usb_gadget_driver
  usb: max-3421: Prevent corruption of freed memory
  usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe
  MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970
  usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes
  usb: typec: stusb160x: register role switch before interrupt registration
  USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
  usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI
  usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
  ...

9 files changed, 14 insertions, 14 deletions

diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 068692350e00..51e17094d7b1 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -1063,7 +1063,7 @@
 	status = "okay";
 	extcon = <&usb2_id>;
 
-	usb@7600000 {
+	dwc3@7600000 {
 		extcon = <&usb2_id>;
 		dr_mode = "otg";
 		maximum-speed = "high-speed";
@@ -1074,7 +1074,7 @@
 	status = "okay";
 	extcon = <&usb3_id>;
 
-	usb@6a00000 {
+	dwc3@6a00000 {
 		extcon = <&usb3_id>;
 		dr_mode = "otg";
 	};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 95d6cb8cd4c0..f39bc10cc5bd 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -443,7 +443,7 @@
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
 
-			dwc_0: usb@8a00000 {
+			dwc_0: dwc3@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -484,7 +484,7 @@
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
-			dwc_1: usb@8c00000 {
+			dwc_1: dwc3@8c00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 0e1bc4669d7e..78c55ca10ba9 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2566,7 +2566,7 @@
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";
 
-			usb@6a00000 {
+			dwc3@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -2873,7 +2873,7 @@
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
-			usb@7600000 {
+			dwc3@7600000 {
 				compatible = "snps,dwc3";
 				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 6f294f9c0cdf..e9d3ce29937c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1964,7 +1964,7 @@
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
-			usb3_dwc3: usb@a800000 {
+			usb3_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a800000 0xcd00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index f8a55307b855..a80c578484ba 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -337,7 +337,7 @@
 &usb3 {
 	status = "okay";
 
-	usb@7580000 {
+	dwc3@7580000 {
 		dr_mode = "host";
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 9c4be020d568..339790ba585d 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -544,7 +544,7 @@
 			assigned-clock-rates = <19200000>, <200000000>;
 			status = "disabled";
 
-			usb@7580000 {
+			dwc3@7580000 {
 				compatible = "snps,dwc3";
 				reg = <0x07580000 0xcd00>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -573,7 +573,7 @@
 			assigned-clock-rates = <19200000>, <133333333>;
 			status = "disabled";
 
-			usb@78c0000 {
+			dwc3@78c0000 {
 				compatible = "snps,dwc3";
 				reg = <0x078c0000 0xcc00>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a5d58eb92896..a9a052f8c63c 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2756,7 +2756,7 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: usb@a600000 {
+			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 1796ae8372be..0a86fe71a66d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3781,7 +3781,7 @@
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: usb@a600000 {
+			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
@@ -3829,7 +3829,7 @@
 					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_2_dwc3: usb@a800000 {
+			usb_2_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a800000 0 0xcd00>;
 				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 612dda0fef43..eef9d79157e9 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2344,7 +2344,7 @@
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			usb_1_dwc3: usb@a600000 {
+			usb_1_dwc3: dwc3@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;