summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-08-30 10:53:12 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-08-30 10:53:12 -0700
commite8d6766f3cc8318e8fcaa5ef2d1af4d2d9903af3 (patch)
tree2227e9c3bfbcb98737d567c4dd0fd2fb0915471e /arch
parent8fb8e9e46261e0117cb3cffb6dd8bb7e08f8649b (diff)
parent7a6c9dbb36a415c5901313fc89871fd19f533656 (diff)
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann: "The majority of the fixes this time are for OMAP hardware, here is a breakdown of the significant changes: Various device tree bug fixes: - TI am57xx boards need a voltage level fix to avoid damaging SD cards - vf610-bk4 fails to detect its flash due to an incorrect description - meson-g12a USB phy configuration fails - meson-g12b reboot should not power off the SD card - Some corrections for apparently harmless differences from the documentation. Regression fixes: - ams-delta FIQ interrupts broke in 5.3 - TI am3/am4 mmc controllers broke in 5.2 The logic_pio driver (used on some Huawei ARM servers) got a few bug fixes for reliability. And a couple of compile-time warning fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits) soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST soc: ti: pm33xx: Make two symbols static soc: ti: pm33xx: Fix static checker warnings ARM: OMAP: dma: Mark expected switch fall-throughs ARM: dts: Fix incomplete dts data for am3 and am4 mmc bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack ARM: dts: dra74x: Fix iodelay configuration for mmc3 ARM: dts: am335x: Fix UARTs length ARM: OMAP2+: Fix omap4 errata warning on other SoCs bus: hisi_lpc: Add .remove method to avoid driver unbind crash bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free lib: logic_pio: Add logic_pio_unregister_range() lib: logic_pio: Avoid possible overlap for unregistering regions lib: logic_pio: Fix RCU usage arm64: dts: amlogic: odroid-n2: keep SD card regulator always on arm64: dts: meson-g12a-sei510: enable IR controller arm64: dts: meson-g12a: add missing dwc2 phy-names ARM: dts: vf610-bk4: Fix qspi node description ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/am33xx-l4.dtsi16
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi32
-rw-r--r--arch/arm/boot/dts/am4372.dtsi32
-rw-r--r--arch/arm/boot/dts/am437x-l4.dtsi4
-rw-r--r--arch/arm/boot/dts/am571x-idk.dts7
-rw-r--r--arch/arm/boot/dts/am572x-idk.dts7
-rw-r--r--arch/arm/boot/dts/am574x-idk.dts7
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi3
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts7
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15-revc.dts7
-rw-r--r--arch/arm/boot/dts/dra7-evm.dts2
-rw-r--r--arch/arm/boot/dts/dra7-l4.dtsi6
-rw-r--r--arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi50
-rw-r--r--arch/arm/boot/dts/vf610-bk4.dts4
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S3
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq.c4
-rw-r--r--arch/arm/mach-omap2/omap4-common.c3
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_7xx_data.c3
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a.dtsi1
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts1
21 files changed, 120 insertions, 85 deletions
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index ced1a19d5f89..46849d6ecb3e 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -185,7 +185,7 @@
uart0: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <72>;
status = "disabled";
dmas = <&edma 26 0>, <&edma 27 0>;
@@ -934,7 +934,7 @@
uart1: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <73>;
status = "disabled";
dmas = <&edma 28 0>, <&edma 29 0>;
@@ -966,7 +966,7 @@
uart2: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <74>;
status = "disabled";
dmas = <&edma 30 0>, <&edma 31 0>;
@@ -1614,7 +1614,7 @@
uart3: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <44>;
status = "disabled";
};
@@ -1644,7 +1644,7 @@
uart4: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <45>;
status = "disabled";
};
@@ -1674,7 +1674,7 @@
uart5: serial@0 {
compatible = "ti,am3352-uart", "ti,omap3-uart";
clock-frequency = <48000000>;
- reg = <0x0 0x2000>;
+ reg = <0x0 0x1000>;
interrupts = <46>;
status = "disabled";
};
@@ -1758,6 +1758,8 @@
target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xcc020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
@@ -1780,6 +1782,8 @@
target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd0020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index e5c2f71a7c77..fb6b8aa12cc5 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -234,13 +234,33 @@
interrupt-names = "edma3_tcerrint";
};
- mmc3: mmc@47810000 {
- compatible = "ti,omap4-hsmmc";
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
- ti,needs-special-reset;
- interrupts = <29>;
- reg = <0x47810000 0x1000>;
- status = "disabled";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ ti,needs-special-reset;
+ interrupts = <29>;
+ reg = <0x0 0x1000>;
+ };
};
usb: usb@47400000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 55aff4db9c7c..848e2a8884e2 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -228,13 +228,33 @@
interrupt-names = "edma3_tcerrint";
};
- mmc3: mmc@47810000 {
- compatible = "ti,omap4-hsmmc";
- reg = <0x47810000 0x1000>;
+ target-module@47810000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "mmc3";
- ti,needs-special-reset;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
+ reg = <0x478102fc 0x4>,
+ <0x47810110 0x4>,
+ <0x47810114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x47810000 0x1000>;
+
+ mmc3: mmc@0 {
+ compatible = "ti,omap4-hsmmc";
+ ti,needs-special-reset;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x1000>;
+ };
};
sham: sham@53100000 {
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 989cb60b9029..04bee4ff9dcb 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1574,6 +1574,8 @@
target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xcc020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can0";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
@@ -1593,6 +1595,8 @@
target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0xd0020 0x4>;
+ reg-names = "rev";
ti,hwmods = "d_can1";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 1d5e99964bbf..0aaacea1d887 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -175,14 +175,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index c65d7f6d3b5a..ea1c119feaa5 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -16,14 +16,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index dc5141c35610..7935d70874ce 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -24,14 +24,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_default>;
- pinctrl-3 = <&mmc1_pins_hs>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
- pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index d02f5fa61e5f..bc76f1705c0f 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -379,7 +379,7 @@
};
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
@@ -430,6 +430,7 @@
bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+ no-1-8-v;
};
&mmc2 {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
index a374b5cd6db0..7b113b52c3fb 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -16,14 +16,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
index 4badd2144db9..30c500b15b21 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -16,14 +16,9 @@
};
&mmc1 {
- pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+ pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default>;
pinctrl-1 = <&mmc1_pins_hs>;
- pinctrl-2 = <&mmc1_pins_sdr12>;
- pinctrl-3 = <&mmc1_pins_sdr25>;
- pinctrl-4 = <&mmc1_pins_sdr50>;
- pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
- pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&ldo1_reg>;
};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 714e971b912a..de7f85efaa51 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -498,7 +498,7 @@
phy-supply = <&ldousb_reg>;
};
-&gpio7 {
+&gpio7_target {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 23faedec08ab..21e5914fdd62 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1261,7 +1261,7 @@
};
};
- target-module@51000 { /* 0x48051000, ap 45 2e.0 */
+ gpio7_target: target-module@51000 { /* 0x48051000, ap 45 2e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "gpio7";
reg = <0x51000 0x4>,
@@ -3025,7 +3025,7 @@
target-module@80000 { /* 0x48480000, ap 31 16.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0x80000 0x4>;
+ reg = <0x80020 0x4>;
reg-names = "rev";
clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
clock-names = "fck";
@@ -4577,7 +4577,7 @@
target-module@c000 { /* 0x4ae3c000, ap 30 04.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- reg = <0xc000 0x4>;
+ reg = <0xc020 0x4>;
reg-names = "rev";
clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
clock-names = "fck";
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
index 28ebb4eb884a..214b9e6de2c3 100644
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -32,7 +32,7 @@
*
* Datamanual Revisions:
*
- * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
* AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
*
*/
@@ -229,45 +229,45 @@
mmc3_pins_default: mmc3_pins_default {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_hs: mmc3_pins_hs {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_sdr12: mmc3_pins_sdr12 {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
mmc3_pins_sdr25: mmc3_pins_sdr25 {
pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
- DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
- DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
- DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
- DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
- DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+ DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+ DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+ DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+ DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+ DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+ DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
>;
};
diff --git a/arch/arm/boot/dts/vf610-bk4.dts b/arch/arm/boot/dts/vf610-bk4.dts
index 3fa0cbe456db..0f3870d3b099 100644
--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@@ -246,13 +246,13 @@
reg = <0>;
};
- n25q128a13_2: flash@1 {
+ n25q128a13_2: flash@2 {
compatible = "n25q128a13", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <66000000>;
spi-rx-bus-width = <2>;
- reg = <1>;
+ reg = <2>;
};
};
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 81159af44862..14a6c3eb3298 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -126,6 +126,8 @@ restart:
orr r11, r11, r13 @ mask all requested interrupts
str r11, [r12, #OMAP1510_GPIO_INT_MASK]
+ str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
+
ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set?
beq hksw @ no - try next source
@@ -133,7 +135,6 @@ restart:
@@@@@@@@@@@@@@@@@@@@@@
@ Keyboard clock FIQ mode interrupt handler
@ r10 now contains KEYBRD_CLK_MASK, use it
- str r10, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack the interrupt
bic r11, r11, r10 @ unmask it
str r11, [r12, #OMAP1510_GPIO_INT_MASK]
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index 43899fa56674..0254eb9cf8c6 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -70,9 +70,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
* interrupts default to since commit 80ac93c27441
* requires interrupt already acked and unmasked.
*/
- if (irq_chip->irq_ack)
- irq_chip->irq_ack(d);
- if (irq_chip->irq_unmask)
+ if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
irq_chip->irq_unmask(d);
}
for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index f9c02f9f1c92..5c3845730dbf 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -127,6 +127,9 @@ static int __init omap4_sram_init(void)
struct device_node *np;
struct gen_pool *sram_pool;
+ if (!soc_is_omap44xx() && !soc_is_omap54xx())
+ return 0;
+
np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
if (!np)
pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 4a5b4aee6615..1ec21e9ba1e9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -379,7 +379,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
.rev_offs = 0x0,
.sysc_offs = 0x4,
- .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+ .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_RESET_STATUS,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type2,
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index c7a87368850b..12aa7eaeaf68 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -339,6 +339,12 @@
pinctrl-names = "default";
};
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index f8d43e3dcf20..1785552d450c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -2386,6 +2386,7 @@
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
phys = <&usb2_phy1>;
+ phy-names = "usb2-phy";
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 81780ffcc7f0..4e916e1f71f7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -53,6 +53,7 @@
gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ regulator-always-on;
};
tf_io: gpio-regulator-tf_io {