Merge tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "A couple of platforms get a lone dts fix each:

   - SoCFPGA: Fix incorrect I2C property for SCL signal

   - Renesas: Fix interrupt names for MTU3 channels on RZ/G2L and
     RZ/V2L.

   - Juno/Vexpress: remove a dangling symlink

   - at91: sam9x60 SoC detection compatible strings

   - nspire: Fix arm primecell compatible string

  On the NXP i.MX platform, there multiple issues that get addressed:

   - A couple of ARM DTS fixes for i.MX6SLL usbphy and supported CPU
     frequency of sk-imx53 board

   - Add missing pull-up for imx8mn-var-som onboard PHY reset pinmux

   - A couple of imx8mm-venice fixes from Tim Harvey to diable
     disp_blk_ctrl

   - A couple of phycore-imx8mm fixes from Yashwanth Varakala to correct
     VPU label and gpio-line-names

   - Fix imx8mp-blk-ctrl driver to register HSIO PLL clock as
     bus_power_dev child, so that runtime PM can translate into the
     necessary GPC power domain action

  On the driver side, there are two fixes for tegra memory controller
  drivers addressing regressions from the merge window, a couple of
  minor correctness fixes for SCMI and SMCCC firmware, as well as a
  build fix for an lcd backlight driver"

* tag 'soc-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
  backlight: corgi_lcd: fix missing prototype
  memory: tegra: make icc_set_bw return zero if BWMGR not supported
  arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
  dt-bindings: serial: atmel,at91-usart: update compatible for sam9x60
  ARM: dts: at91: sam9x60: fix the SOC detection
  ARM: dts: nspire: Fix arm primecell compatible string
  firmware: arm_scmi: Fix chan_free cleanup on SMC
  firmware: arm_scmi: Drop OF node reference in the transport channel setup
  soc: imx: imx8mp-blk-ctrl: register HSIO PLL clock as bus_power_dev child
  ARM: dts: nxp/imx: limit sk-imx53 supported frequencies
  firmware: arm_scmi: Fix signed error return values handling
  firmware: smccc: Fix use of uninitialised results structure
  arm64: dts: freescale: Fix VPU G2 clock
  arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux
  arm64: dts: phycore-imx8mm: Correction in gpio-line-names
  arm64: dts: phycore-imx8mm: Label typo-fix of VPU
  ARM: dts: nxp/imx6sll: fix wrong property name in usbphy node
  arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
  arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
  arm64: dts: arm: Remove the dangling vexpress-v2m-rs1.dtsi symlink
  ...

17 files changed, 57 insertions, 40 deletions

diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 8b53997675e7..73d570a17269 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -172,7 +172,7 @@
 				status = "disabled";
 
 				uart4: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -240,7 +240,7 @@
 				status = "disabled";
 
 				uart5: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 					interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -370,7 +370,7 @@
 				status = "disabled";
 
 				uart11: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -419,7 +419,7 @@
 				status = "disabled";
 
 				uart12: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -576,7 +576,7 @@
 				status = "disabled";
 
 				uart6: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -625,7 +625,7 @@
 				status = "disabled";
 
 				uart7: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -674,7 +674,7 @@
 				status = "disabled";
 
 				uart8: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -723,7 +723,7 @@
 				status = "disabled";
 
 				uart0: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -791,7 +791,7 @@
 				status = "disabled";
 
 				uart1: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -859,7 +859,7 @@
 				status = "disabled";
 
 				uart2: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -927,7 +927,7 @@
 				status = "disabled";
 
 				uart3: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -1050,7 +1050,7 @@
 				status = "disabled";
 
 				uart9: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
@@ -1099,7 +1099,7 @@
 				status = "disabled";
 
 				uart10: serial@200 {
-					compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+					compatible = "microchip,sam9x60-usart", "atmel,at91sam9260-usart";
 					reg = <0x200 0x200>;
 					interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <&dma0
diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi
index bb240e6a3a6f..088bcc38589f 100644
--- a/arch/arm/boot/dts/nspire/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire/nspire.dtsi
@@ -161,7 +161,7 @@
 			};
 
 			watchdog: watchdog@90060000 {
-				compatible = "arm,amba-primecell";
+				compatible = "arm,primecell";
 				reg = <0x90060000 0x1000>;
 				interrupts = <3>;
 			};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
index 103e73176e47..1a00d290092a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx53-sk-imx53.dts
@@ -60,6 +60,16 @@
 	status = "okay";
 };
 
+&cpu0 {
+	/* CPU rated to 800 MHz, not the default 1.2GHz. */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+	>;
+};
+
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 2873369a57c0..3659fd5ecfa6 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -552,7 +552,7 @@
 				reg = <0x020ca000 0x1000>;
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
-				phy-reg_3p0-supply = <&reg_3p0>;
+				phy-3p0-supply = <&reg_3p0>;
 				fsl,anatop = <&anatop>;
 			};
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
index 20e4cab64d85..623167f30ec2 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
@@ -105,5 +105,4 @@ void sharpsl_pm_led(int val);
 #define MAX1111_ACIN_VOLT   6u
 int sharpsl_pm_pxa_read_max1111(int channel);
 
-void corgi_lcd_limit_intensity(int limit);
 #endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 1c021cef965f..8bc4ea51a0c1 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -15,6 +15,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
+#include <linux/spi/corgi_lcd.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 38ae674f2f02..3037f58057c9 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -145,7 +145,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&i2c1_pmx_func>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index ede99dcc0558..f4cf30bac557 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -141,7 +141,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 	i2c-sda-falling-time-ns = <890>;  /* hcnt */
-	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
+	i2c-scl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
deleted file mode 120000
index 68fd0f8f1dee..000000000000
--- a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
index 03e7679217b2..479948f8a4b7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
@@ -141,7 +141,7 @@
 };
 
 &gpio1 {
-	gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT",
+	gpio-line-names = "", "LED_RED", "WDOG_INT", "X_RTC_INT",
 		"", "", "", "RESET_ETHPHY",
 		"CAN_nINT", "CAN_EN", "nENABLE_FLATLINK", "",
 		"USB_OTG_VBUS_EN", "", "LED_GREEN", "LED_BLUE";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 92616bc4f71f..847f08537b48 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -111,7 +111,7 @@
 };
 
 &gpio1 {
-	gpio-line-names = "nINT_ETHPHY", "", "WDOG_INT", "X_RTC_INT",
+	gpio-line-names = "", "", "WDOG_INT", "X_RTC_INT",
 		"", "", "", "RESET_ETHPHY",
 		"", "", "nENABLE_FLATLINK";
 };
@@ -210,7 +210,7 @@
 				};
 			};
 
-			reg_vdd_gpu: buck3 {
+			reg_vdd_vpu: buck3 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-max-microvolt = <1000000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index 6f26914602c8..07b07dc954fd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -567,6 +567,10 @@
 	status = "okay";
 };
 
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
 &pgc_mipi {
 	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
index 93088fa1c3b9..d5b716855812 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
@@ -628,6 +628,10 @@
 	status = "okay";
 };
 
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
 &pgc_mipi {
 	status = "disabled";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index d3a67109d55b..b8946edf317b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -358,7 +358,7 @@
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x159
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 1a2d2c04db32..01eec424f7f7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -772,7 +772,7 @@
 									 <&clk IMX8MQ_SYS1_PLL_800M>,
 									 <&clk IMX8MQ_VPU_PLL>;
 						assigned-clock-rates = <600000000>,
-								       <600000000>,
+								       <300000000>,
 								       <800000000>,
 								       <0>;
 					};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 232910e07444..66f68fc2b241 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -223,20 +223,20 @@
 				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
-					  "tgiv0", "tgie0", "tgif0",
-					  "tgia1", "tgib1", "tgiv1", "tgiu1",
-					  "tgia2", "tgib2", "tgiv2", "tgiu2",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
 					  "tgia3", "tgib3", "tgic3", "tgid3",
-					  "tgiv3",
+					  "tciv3",
 					  "tgia4", "tgib4", "tgic4", "tgid4",
-					  "tgiv4",
+					  "tciv4",
 					  "tgiu5", "tgiv5", "tgiw5",
 					  "tgia6", "tgib6", "tgic6", "tgid6",
-					  "tgiv6",
+					  "tciv6",
 					  "tgia7", "tgib7", "tgic7", "tgid7",
-					  "tgiv7",
+					  "tciv7",
 					  "tgia8", "tgib8", "tgic8", "tgid8",
-					  "tgiv8", "tgiu8";
+					  "tciv8", "tciu8";
 			clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
 			power-domains = <&cpg>;
 			resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 2eba3a8a100d..1f1d481dc783 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -223,20 +223,20 @@
 				     <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
 				     <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0",
-					  "tgiv0", "tgie0", "tgif0",
-					  "tgia1", "tgib1", "tgiv1", "tgiu1",
-					  "tgia2", "tgib2", "tgiv2", "tgiu2",
+					  "tciv0", "tgie0", "tgif0",
+					  "tgia1", "tgib1", "tciv1", "tciu1",
+					  "tgia2", "tgib2", "tciv2", "tciu2",
 					  "tgia3", "tgib3", "tgic3", "tgid3",
-					  "tgiv3",
+					  "tciv3",
 					  "tgia4", "tgib4", "tgic4", "tgid4",
-					  "tgiv4",
+					  "tciv4",
 					  "tgiu5", "tgiv5", "tgiw5",
 					  "tgia6", "tgib6", "tgic6", "tgid6",
-					  "tgiv6",
+					  "tciv6",
 					  "tgia7", "tgib7", "tgic7", "tgid7",
-					  "tgiv7",
+					  "tciv7",
 					  "tgia8", "tgib8", "tgic8", "tgid8",
-					  "tgiv8", "tgiu8";
+					  "tciv8", "tciu8";
 			clocks = <&cpg CPG_MOD R9A07G054_MTU_X_MCK_MTU3>;
 			power-domains = <&cpg>;
 			resets = <&cpg R9A07G054_MTU_X_PRESET_MTU3>;