diff options
| author | Olof Johansson <olof@lixom.net> | 2019-04-28 12:40:48 -0700 |
|---|---|---|
| committer | Olof Johansson <olof@lixom.net> | 2019-04-28 12:40:48 -0700 |
| commit | f5d6e8c077915c84d8b544bc02e3df2f0910c193 (patch) | |
| tree | e0d145883af000dc5043ccfcad3cdb76f920b46d /arch | |
| parent | 14d55a3df44a288a4d273dff2a5f08ae06614774 (diff) | |
| parent | 6e0c67e34ffced703abb573d6266104b08bc95d4 (diff) | |
Merge tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.2
This PR is pretty significant, but it been mostly about:
- Fixing the DTC warnings in most of our DT. We're now down to 2
warnings, from several thousands.
- Fixing a good number of minor issues, typos, and so on thanks to the DT
validation tools
- Describe the MBUS controller and the special DMA RAM mapping on the A13
- Add support for the LRADC on the A83t
- Add support for the I2C bus used for the PMIC on the A33
- Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes
* tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits)
ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
ARM: dtsi: axp81x: add USB power supply node
ARM: dts: sun5i: Reorder pinctrl nodes
ARM: dts: sun6i: i7: Remove useless property
ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties
ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry
ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences.
ARM: dts: sun5i: Add the MBUS controller
dt-bindings: sunxi: Add compatible for OrangePi 3 board
ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins
dt-bindings: arm: sunxi: Add Beelink GS1 board
ARM: dts: sun8i: tbs-a711: Add support for volume keys input
ARM: dts: sunxi: Add R_LRADC support for A83T
ARM: dts: sunxi: Improve A33 NAND transfers by using DMA
ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)
ARM: dts: sunxi: Remove useless pinctrl nodes
ARM: dts: sunxi: Remove pinctrl groups setting bias
ARM: dts: sunxi: Remove useless address and size cells
ARM: dts: sunxi: Conform to DT spec for NAND controller
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch')
79 files changed, 577 insertions, 959 deletions
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi index bd83962d3627..1dfeeceabf4c 100644 --- a/arch/arm/boot/dts/axp81x.dtsi +++ b/arch/arm/boot/dts/axp81x.dtsi @@ -171,4 +171,8 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp813-usb-power-supply"; + }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index cf7b392dff31..74262988881c 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -131,20 +131,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -165,10 +151,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 197a1f2b75ff..7306c65df88a 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -184,12 +184,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_ahci_5v { @@ -254,9 +248,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts index 896e27a08727..8ee3ff42bd55 100644 --- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts +++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts @@ -158,20 +158,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,10 +209,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index f63767cddd8e..bf2044bac42f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -86,20 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -121,10 +107,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts index 26d0c1d6a02b..ca878384e902 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet1.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -164,20 +164,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -233,10 +219,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 71c27ea0b53e..76016f2ca29d 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -150,20 +150,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -209,10 +195,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts index 2f0d966f39ad..0a562b2cc5bc 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -61,8 +61,6 @@ gpio-keys { compatible = "gpio-keys-polled"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_inet9f>; poll-interval = <20>; left-joystick-left { @@ -70,7 +68,7 @@ linux,code = <ABS_X>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */ + gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */ }; left-joystick-right { @@ -78,7 +76,7 @@ linux,code = <ABS_X>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */ + gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */ }; left-joystick-up { @@ -86,7 +84,7 @@ linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ + gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */ }; left-joystick-down { @@ -94,7 +92,7 @@ linux,code = <ABS_Y>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */ }; right-joystick-left { @@ -102,7 +100,7 @@ linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */ + gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */ }; right-joystick-right { @@ -110,7 +108,7 @@ linux,code = <ABS_Z>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */ + gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */ }; right-joystick-up { @@ -118,7 +116,7 @@ linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */ + gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */ }; right-joystick-down { @@ -126,7 +124,7 @@ linux,code = <ABS_RZ>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ + gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */ }; dpad-left { @@ -134,7 +132,7 @@ linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */ + gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */ }; dpad-right { @@ -142,7 +140,7 @@ linux,code = <ABS_HAT0X>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */ }; dpad-up { @@ -150,7 +148,7 @@ linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; linux,input-value = <0xffffffff>; /* -1 */ - gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */ }; dpad-down { @@ -158,55 +156,55 @@ linux,code = <ABS_HAT0Y>; linux,input-type = <EV_ABS>; linux,input-value = <1>; - gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */ + gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */ }; x { label = "Button X"; linux,code = <BTN_X>; - gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */ + gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */ }; y { label = "Button Y"; linux,code = <BTN_Y>; - gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */ + gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */ }; a { label = "Button A"; linux,code = <BTN_A>; - gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */ + gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */ }; b { label = "Button B"; linux,code = <BTN_B>; - gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */ + gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */ }; select { label = "Select Button"; linux,code = <BTN_SELECT>; - gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */ + gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */ }; start { label = "Start Button"; linux,code = <BTN_START>; - gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */ + gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */ }; top-left { label = "Top Left Button"; linux,code = <BTN_TL>; - gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ + gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */ }; top-right { label = "Top Right Button"; linux,code = <BTN_TR>; - gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */ + gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */ }; }; }; @@ -306,30 +304,6 @@ status = "okay"; }; -&pio { - key_pins_inet9f: key-pins { - pins = "PA0", "PA1", "PA3", "PA4", - "PA5", "PA6", "PA8", "PA9", - "PA11", "PA12", "PA13", - "PA14", "PA15", "PA16", "PA17", - "PH22", "PH23", "PH24", "PH25", "PH26"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -375,10 +349,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 0dbf69576512..58ad2ad9041f 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -148,14 +148,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -183,9 +175,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index b74a61496537..a8e537fd4bd6 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -186,18 +186,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -229,10 +217,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index d82a604f3d9c..0f1e781069e9 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -154,14 +154,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -201,9 +193,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts index 84b25be1ac94..24a3d23e1952 100644 --- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -146,20 +146,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -211,10 +197,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 73c3ac42095f..e88daa4ef1af 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -267,7 +267,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -342,6 +342,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -391,6 +392,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -494,13 +496,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -517,7 +520,6 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -527,7 +529,6 @@ interrupts = <64>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -607,7 +608,6 @@ interrupts = <40>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -617,7 +617,6 @@ interrupts = <65>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index c88f08984483..8af0eae2ddc1 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -119,12 +119,6 @@ }; &pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; - led_pins_t004: led-pin { pins = "PB2"; function = "gpio_out"; @@ -149,9 +143,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 262c2ffbdcfa..5340b4164df2 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -218,12 +218,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG12"; - function = "gpio_in"; - bias-pull-up; - }; }; ®_usb0_vbus { @@ -271,9 +265,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index f3cede9beb63..a23bf24792ec 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -127,20 +127,6 @@ status = "okay"; }; -&pio { - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -195,10 +181,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 9369f7453beb..9b9f2a574851 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -124,14 +124,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -182,9 +174,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts index ca8f3fd1ddfe..ba8d75b3c716 100644 --- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts +++ b/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts @@ -206,9 +206,8 @@ }; &usbphy { - pinctrl-names = "default"; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 943868e495bc..5df398d77238 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -109,18 +109,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_usb0_vbus { @@ -145,10 +133,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 9409c232d48a..39101228a755 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -74,8 +74,6 @@ bridge { compatible = "dumb-vga-dac"; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; @@ -204,18 +202,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_usb0_vbus { @@ -253,10 +239,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts index 7257f39b31ce..fde559a8b61e 100644 --- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -53,16 +53,9 @@ power-supply = <®_vcc3v3>; enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */ backlight = <&backlight>; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_lcd>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 732873cbeedc..be486d28d04f 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -58,13 +58,11 @@ /delete-property/stdout-path; }; - i2c_lcd: i2c-gpio { + i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */ - <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */ + sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ + scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */ i2c-gpio,delay-us = <5>; }; }; @@ -94,14 +92,6 @@ }; }; -&pio { - i2c_lcd_pins: i2c-lcd-pin { - pins = "PG10", "PG12"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts index 3f70b8c53132..a32cde3e32eb 100644 --- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts +++ b/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts @@ -133,8 +133,6 @@ status = "okay"; nand@0 { - #address-cells = <2>; - #size-cells = <2>; reg = <0>; allwinner,rb = <0>; nand-ecc-mode = "hw"; @@ -233,7 +231,7 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts index 86e46aa59134..d003b895a696 100644 --- a/arch/arm/boot/dts/sun5i-gr8-evb.dts +++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts @@ -325,8 +325,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index f4298facf9dc..4bf4943d4eb7 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -84,9 +84,7 @@ onewire { compatible = "w1-gpio"; - gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ - pinctrl-names = "default"; - pinctrl-0 = <&chip_w1_pin>; + gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */ }; }; @@ -173,14 +171,6 @@ status = "okay"; }; -&pio { - chip_w1_pin: chip-w1-pin { - pins = "PD2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; @@ -279,7 +269,7 @@ &usbphy { status = "okay"; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 5b1f0e198eb6..1a9926d71410 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -132,20 +132,6 @@ status = "okay"; }; -&pio { - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PG1"; - function = "gpio_in"; - bias-pull-down; - }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PG2"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -198,10 +184,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 5497d985c54a..2fb438c4fe9d 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -127,6 +127,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; + dma-ranges; ranges; system-control@1c00000 { @@ -181,6 +182,14 @@ }; }; + mbus: dram-controller@1c01000 { + compatible = "allwinner,sun5i-a13-mbus"; + reg = <0x01c01000 0x1000>; + clocks = <&ccu 99>; + dma-ranges = <0x00000000 0x40000000 0x20000000>; + #interconnect-cells = <1>; + }; + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; @@ -189,7 +198,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <37>; @@ -238,11 +247,8 @@ status = "disabled"; port { - #address-cells = <1>; - #size-cells = <0>; - tve0_in_tcon0: endpoint@0 { - reg = <0>; + tve0_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_tve0>; }; }; @@ -278,6 +284,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; status = "disabled"; ports { @@ -285,12 +292,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_be0: endpoint@0 { - reg = <0>; + tcon0_in_be0: endpoint { remote-endpoint = <&be0_out_tcon0>; }; }; @@ -365,13 +369,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>; reg-names = "phy_ctrl", "pmu1"; clocks = <&ccu CLK_USB_PHY0>; clock-names = "usb_phy"; @@ -386,7 +391,6 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -396,7 +400,6 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -501,18 +504,18 @@ bias-pull-up; }; - mmc2_8bit_pins: mmc2-8bit-pins { + mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11", "PC12", "PC13", - "PC14", "PC15"; + "PC10", "PC11"; function = "mmc2"; drive-strength = <30>; bias-pull-up; }; - mmc2_4bit_pc_pins: mmc2-4bit-pc-pins { + mmc2_8bit_pins: mmc2-8bit-pins { pins = "PC6", "PC7", "PC8", "PC9", - "PC10", "PC11"; + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; function = "mmc2"; drive-strength = <30>; bias-pull-up; @@ -536,6 +539,11 @@ function = "nand0"; }; + pwm0_pin: pwm0-pin { + pins = "PB2"; + function = "pwm"; + }; + spi2_pe_pins: spi2-pe-pins { pins = "PE1", "PE2", "PE3"; function = "spi2"; @@ -575,11 +583,6 @@ pins = "PG11", "PG12"; function = "uart3"; }; - - pwm0_pin: pwm0-pin { - pins = "PB2"; - function = "pwm"; - }; }; timer@1c20c00 { @@ -727,6 +730,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_FE>; + interconnects = <&mbus 19>; + interconnect-names = "dma-mem"; status = "disabled"; ports { @@ -734,12 +739,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_be0: endpoint@0 { - reg = <0>; + fe0_out_be0: endpoint { remote-endpoint = <&be0_in_fe0>; }; }; @@ -755,6 +757,8 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_DE_BE>; + interconnects = <&mbus 18>; + interconnect-names = "dma-mem"; status = "disabled"; assigned-clocks = <&ccu CLK_DE_BE>; @@ -765,23 +769,17 @@ #size-cells = <0>; be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - be0_in_fe0: endpoint@0 { - reg = <0>; + be0_in_fe0: endpoint { remote-endpoint = <&fe0_out_be0>; }; }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_tcon0: endpoint@0 { - reg = <0>; + be0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_be0>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 0b7bedf85fb9..c3d56dc93513 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -63,10 +63,8 @@ i2c_lcd: i2c { /* The lcd panel i2c interface is hooked up via gpios */ compatible = "i2c-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_lcd_pins>; - gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */ - <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */ + sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */ + scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */ i2c-gpio,delay-us = <5>; }; }; @@ -113,14 +111,6 @@ status = "okay"; }; -&pio { - i2c_lcd_pins: i2c-lcd-pins { - pins = "PA23", "PA24"; - function = "gpio_out"; - bias-pull-up; - }; -}; - ®_usb2_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index e17a65b3561e..09832b4e8fc8 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -86,31 +86,23 @@ vga-dac { compatible = "dumb-vga-dac"; vdd-supply = <®_vga_3v3>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -335,8 +327,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ - usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts index 0832ac5ae3ec..091eb2ac53b3 100644 --- a/arch/arm/boot/dts/sun6i-a31-i7.dts +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -157,7 +157,6 @@ &spdif { pinctrl-names = "default"; pinctrl-0 = <&spdif_tx_pin>; - spdif-out = "okay"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 13304b8c5139..c04efad81bbc 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -292,6 +292,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -340,6 +341,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; @@ -491,8 +493,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -508,6 +508,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -542,7 +543,6 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -553,7 +553,6 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -564,7 +563,6 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -575,7 +573,6 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -1029,7 +1026,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -1229,12 +1226,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -1259,12 +1253,9 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; @@ -1380,7 +1371,6 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; s_ir_rx_pin: s-ir-rx-pin { diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 60b355f7184c..bc3170a0b8b5 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -260,7 +260,7 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 86143de21c22..7de2abd541c1 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -73,14 +73,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PA15"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &p2wi { status = "okay"; @@ -173,9 +165,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 81bc85d398c1..4df921632f7a 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -246,12 +246,6 @@ "SPI-MISO", "SPI-CE1", "", "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; }; #include "axp209.dtsi" @@ -329,9 +323,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 200685b0b1cb..08e5a5abf8cc 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -173,14 +173,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { status = "okay"; }; @@ -236,9 +228,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index f91e1bee44e8..3e170cfac86a 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -229,14 +229,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - #include "axp209.dtsi" &ac_power_supply { @@ -322,9 +314,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts index 823aabce0462..c34a83f666c7 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts @@ -314,8 +314,8 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 5e411194bf62..e40dd47df8ce 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -174,18 +174,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -217,10 +205,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 4e1c590eb098..95c6f8949076 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -174,23 +174,17 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_ldo3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_ldo4>; + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; ®_ahci_5v { @@ -267,10 +261,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 840ae1194a66..0dcba070444a 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -252,18 +252,6 @@ function = "gpio_out"; drive-strength = <20>; }; - - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_vbus_detect_pin: usb0-vbus-detect-pin { - pins = "PH5"; - function = "gpio_in"; - bias-pull-down; - }; }; #include "axp209.dtsi" @@ -355,10 +343,8 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 15881081cac4..9628041bb3a3 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -176,14 +176,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -239,9 +231,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index d64de2e73a9f..7b3532665c28 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -135,14 +135,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -198,9 +190,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 538ea15fa32f..173b676436e9 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -168,14 +168,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; @@ -226,9 +218,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index a72ed4318d04..14a88aa16a97 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -168,14 +168,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_ahci_5v { gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; status = "okay"; @@ -226,9 +218,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index ffade253d129..6a66b0432dfa 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -156,14 +156,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; @@ -223,9 +215,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index c27e56091fb1..f8475a39777b 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -145,14 +145,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH4"; - function = "gpio_in"; - bias-pull-up; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -206,9 +198,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 641a8fa6d428..9ad8e445b240 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -333,7 +333,7 @@ #dma-cells = <2>; }; - nfc: nand@1c03000 { + nfc: nand-controller@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -406,6 +406,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 14>; ports { @@ -455,6 +456,7 @@ "tcon-ch0", "tcon-ch1"; clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; dmas = <&dma SUN4I_DMA_DEDICATED 15>; ports { @@ -586,13 +588,14 @@ phy-names = "usb"; extcon = <&usbphy 0>; allwinner,sram = <&otg_sram 1>; + dr_mode = "otg"; status = "disabled"; }; usbphy: phy@1c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>; reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&ccu CLK_USB_PHY>; clock-names = "usb_phy"; @@ -609,7 +612,6 @@ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -619,7 +621,6 @@ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -702,7 +703,6 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -712,7 +712,6 @@ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -751,21 +750,31 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + can_pa_pins: can-pa-pins { + pins = "PA16", "PA17"; + function = "can"; + }; + + /omit-if-no-ref/ can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; + /omit-if-no-ref/ clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; + /omit-if-no-ref/ clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; + /omit-if-no-ref/ emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -775,6 +784,17 @@ function = "emac"; }; + /omit-if-no-ref/ + emac_ph_pins: emac-ph-pins { + pins = "PH8", "PH9", "PH10", "PH11", + "PH14", "PH15", "PH16", "PH17", + "PH18", "PH19", "PH20", "PH21", + "PH22", "PH23", "PH24", "PH25", + "PH26"; + function = "emac"; + }; + + /omit-if-no-ref/ gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -784,6 +804,7 @@ function = "gmac"; }; + /omit-if-no-ref/ gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -798,46 +819,55 @@ drive-strength = <40>; }; + /omit-if-no-ref/ i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; + /omit-if-no-ref/ i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; + /omit-if-no-ref/ i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; + /omit-if-no-ref/ i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; + /omit-if-no-ref/ ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; + /omit-if-no-ref/ ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; + /omit-if-no-ref/ ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; + /omit-if-no-ref/ ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; + /omit-if-no-ref/ mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -846,6 +876,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; @@ -854,6 +885,7 @@ bias-pull-up; }; + /omit-if-no-ref/ mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; @@ -862,127 +894,206 @@ bias-pull-up; }; + /omit-if-no-ref/ ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; + /omit-if-no-ref/ ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; + /omit-if-no-ref/ pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; + /omit-if-no-ref/ pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; + /omit-if-no-ref/ spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; + /omit-if-no-ref/ spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; + /omit-if-no-ref/ spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; + /omit-if-no-ref/ spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; + /omit-if-no-ref/ spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; + /omit-if-no-ref/ spi2_pb_pins: spi2-pb-pins { pins = "PB15", "PB16", "PB17"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pb_pin: spi2-cs0-pb-pin { pins = "PB14"; function = "spi2"; }; + /omit-if-no-ref/ spi2_pc_pins: spi2-pc-pins { pins = "PC20", "PC21", "PC22"; function = "spi2"; }; + /omit-if-no-ref/ spi2_cs0_pc_pin: spi2-cs0-pc-pin { pins = "PC19"; function = "spi2"; }; + /omit-if-no-ref/ uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; + /omit-if-no-ref/ + uart0_pf_pins: uart0-pf-pins { + pins = "PF2", "PF4"; + function = "uart0"; + }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA10", "PA11"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins { + pins = "PA12", "PA13"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart2_pa_pins: uart2-pa-pins { + pins = "PA2", "PA3"; + function = "uart2"; + }; + + /omit-if-no-ref/ + uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins { + pins = "PA0", "PA1"; + function = "uart2"; + }; + + /omit-if-no-ref/ uart2_pi_pins: uart2-pi-pins { pins = "PI18", "PI19"; function = "uart2"; }; + /omit-if-no-ref/ uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { pins = "PI16", "PI17"; function = "uart2"; }; + /omit-if-no-ref/ uart3_pg_pins: uart3-pg-pins { pins = "PG6", "PG7"; function = "uart3"; }; + /omit-if-no-ref/ uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { pins = "PG8", "PG9"; function = "uart3"; }; + /omit-if-no-ref/ uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; + /omit-if-no-ref/ + uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins { + pins = "PH2", "PH3"; + function = "uart3"; + }; + + /omit-if-no-ref/ uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; + /omit-if-no-ref/ uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; + /omit-if-no-ref/ + uart5_ph_pins: uart5-ph-pins { + pins = "PH6", "PH7"; + function = "uart5"; + }; + + /omit-if-no-ref/ uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; + /omit-if-no-ref/ + uart6_pa_pins: uart6-pa-pins { + pins = "PA12", "PA13"; + function = "uart6"; + }; + + /omit-if-no-ref/ uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; + /omit-if-no-ref/ + uart7_pa_pins: uart7-pa-pins { + pins = "PA14", "PA15"; + function = "uart7"; + }; + + /omit-if-no-ref/ uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; @@ -1341,7 +1452,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 43fe215e83ea..af2fa694a467 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -161,14 +161,18 @@ #dma-cells = <1>; }; - nfc: nand@1c03000 { - compatible = "allwinner,sun4i-a10-nand"; + nfc: nand-controller@1c03000 { + compatible = "allwinner,sun8i-a23-nand-controller"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; resets = <&ccu RST_BUS_NAND>; reset-names = "ahb"; + dmas = <&dma 5>; + dma-names = "rxtx"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -183,6 +187,7 @@ clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_LCD>; reset-names = "lcd"; status = "disabled"; @@ -192,19 +197,14 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_drc0: endpoint@0 { - reg = <0>; + tcon0_in_drc0: endpoint { remote-endpoint = <&drc0_out_tcon0>; }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -279,6 +279,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -306,7 +307,6 @@ clocks = <&ccu CLK_BUS_EHCI>; resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -317,7 +317,6 @@ clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -396,25 +395,25 @@ function = "nand0"; }; - nand_pins_cs0: nand-pins-cs0 { + nand_cs0_pin: nand-cs0-pin { pins = "PC4"; function = "nand0"; bias-pull-up; }; - nand_pins_cs1: nand-pins-cs1 { + nand_cs1_pin: nand-cs1-pin { pins = "PC3"; function = "nand0"; bias-pull-up; }; - nand_pins_rb0: nand-pins-rb0 { + nand_rb0_pin: nand-rb0-pin { pins = "PC6"; function = "nand0"; bias-pull-up; }; - nand_pins_rb1: nand-pins-rb1 { + nand_rb1_pin: nand-rb1-pin { pins = "PC7"; function = "nand0"; bias-pull-up; @@ -602,7 +601,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -627,12 +626,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_be0: endpoint@0 { - reg = <0>; + fe0_out_be0: endpoint { remote-endpoint = <&be0_in_fe0>; }; }; @@ -654,23 +650,17 @@ #size-cells = <0>; be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - be0_in_fe0: endpoint@0 { - reg = <0>; + be0_in_fe0: endpoint { remote-endpoint = <&fe0_out_be0>; }; }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -694,23 +684,17 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc0_out_tcon0: endpoint@0 { - reg = <0>; + drc0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_drc0>; }; }; @@ -799,6 +783,20 @@ status = "disabled"; }; + r_i2c: i2c@1f02400 { + compatible = "allwinner,sun8i-a23-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x01f02400 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + clocks = <&apb0_gates 6>; + resets = <&apb0_rst 6>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -811,6 +809,12 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + bias-pull-up; + }; + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index d4dab7c28398..5659c63d7d77 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -65,3 +65,9 @@ &panel { compatible = "bananapi,s070wv20-ct16", "simple-panel"; }; + +&tcon0_out { + tcon0_out_lcd: endpoint { + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts index b0bc2360f8c4..9c5750c25613 100644 --- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -48,3 +48,10 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; + +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index f3667268adde..785798e3a104 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -63,16 +63,9 @@ panel { compatible = "netron-dy,e231732"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_panel>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 1111a6498102..1532a0e59af4 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -265,19 +265,12 @@ phys = <&dphy>; phy-names = "dphy"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - dsi_in_tcon0: endpoint { - remote-endpoint = <&tcon0_out_dsi>; - }; + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; }; }; }; @@ -420,6 +413,9 @@ }; &tcon0_out { + #address-cells = <1>; + #size-cells = <0>; + tcon0_out_dsi: endpoint@1 { reg = <1>; remote-endpoint = <&dsi_in_tcon0>; diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 838be7b3715f..9d34eabba121 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -389,7 +389,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index fcbec3d7ccd7..ea299d3d84d0 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -420,7 +420,19 @@ }; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 98e8cea26dbe..66d078053d5f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -46,6 +46,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> / { model = "TBS A711 Tablet"; @@ -98,6 +99,13 @@ }; }; + reg_gps: reg-gps { + compatible = "regulator-fixed"; + regulator-name = "gps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + reg_vbat: reg-vbat { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -156,6 +164,18 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ + }; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; pinctrl-names = "default"; @@ -200,6 +220,25 @@ status = "okay"; }; +&r_lradc { + vref-supply = <®_aldo2>; + status = "okay"; + + button@210 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <210000>; + }; + + button@410 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <410000>; + }; +}; + &r_rsb { status = "okay"; @@ -391,8 +430,7 @@ }; &tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; + tcon0_out_lcd: endpoint { remote-endpoint = <&panel_input>; }; }; @@ -407,7 +445,34 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ac100_rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vbat>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pb_pins>; status = "okay"; + + gnss { + compatible = "u-blox,neo-6m"; + + v-bckp-supply = <®_rtc_ldo>; + vcc-supply = <®_gps>; + current-speed = <9600>; + }; }; &usb_otg { @@ -418,7 +483,7 @@ &usbphy { usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ usb0_vbus-supply = <®_drivevbus>; - usb1_vbus_supply = <®_vmain>; - usb2_vbus_supply = <®_vmain>; + usb1_vbus-supply = <®_vmain>; + usb2_vbus-supply = <®_vmain>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index b099d2fbb5cd..392b0cabbf0d 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -61,79 +61,91 @@ #size-cells = <0>; cpu0: cpu@0 { - clocks = <&ccu CLK_C0CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0>; + #cooling-cells = <2>; }; cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <1>; + #cooling-cells = <2>; }; cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <2>; + #cooling-cells = <2>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C0CPUX>; operating-points-v2 = <&cpu0_opp_table>; cci-control-port = <&cci_control0>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <3>; + #cooling-cells = <2>; }; cpu100: cpu@100 { - clocks = <&ccu CLK_C1CPUX>; - clock-names = "cpu"; compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x100>; + #cooling-cells = <2>; }; cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x101>; + #cooling-cells = <2>; }; cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x102>; + #cooling-cells = <2>; }; cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; + clocks = <&ccu CLK_C1CPUX>; operating-points-v2 = <&cpu1_opp_table>; cci-control-port = <&cci_control1>; enable-method = "allwinner,sun8i-a83t-smp"; reg = <0x103>; + #cooling-cells = <2>; }; }; @@ -333,6 +345,11 @@ reg = <0>; remote-endpoint = <&tcon0_in_mixer0>; }; + + mixer0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_mixer0>; + }; }; }; }; @@ -351,9 +368,17 @@ #size-cells = <0>; mixer1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; reg = <1>; - mixer1_out_tcon1: endpoint { + mixer1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_mixer1>; + }; + + mixer1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_mixer1>; }; }; @@ -420,6 +445,7 @@ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>; reset-names = "lcd", "lvds"; @@ -436,11 +462,14 @@ reg = <0>; remote-endpoint = <&mixer0_out_tcon0>; }; + + tcon0_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon0>; + }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -460,9 +489,17 @@ #size-cells = <0>; tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - tcon1_in_mixer1: endpoint { + tcon1_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon1>; + }; + + tcon1_in_mixer1: endpoint@1 { + reg = <1>; remote-endpoint = <&mixer1_out_tcon1>; }; }; @@ -557,6 +594,7 @@ phys = <&usbphy 0>; phy-names = "usb"; extcon = <&usbphy 0>; + dr_mode = "otg"; status = "disabled"; }; @@ -594,7 +632,6 @@ clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -606,7 +643,6 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -618,7 +654,6 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -671,6 +706,12 @@ function = "i2c1"; }; + /omit-if-no-ref/ + i2c2_pe_pins: i2c2-pe-pins { + pins = "PE14", "PE15"; + function = "i2c2"; + }; + i2c2_ph_pins: i2c2-ph-pins { pins = "PH4", "PH5"; function = "i2c2"; @@ -742,6 +783,12 @@ pins = "PG8", "PG9"; function = "uart1"; }; + + /omit-if-no-ref/ + uart2_pb_pins: uart2-pb-pins { + pins = "PB0", "PB1"; + function = "uart2"; + }; }; timer@1c20c00 { @@ -847,6 +894,39 @@ status = "disabled"; }; + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun8i-a83t-i2c", "allwinner,sun6i-a31-i2c"; @@ -907,7 +987,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x2000>, <0x01c84000 0x2000>, @@ -998,6 +1078,13 @@ status = "disabled"; }; + r_lradc: lradc@1f03c00 { + compatible = "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01f03c00 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi index f110ee382239..ec2a05ff4b96 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi @@ -59,8 +59,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_npi>, <&leds_r_npi>; status { label = "nanopi:blue:status"; @@ -78,8 +76,6 @@ r_gpio_keys { compatible = "gpio-keys"; input-name = "k1"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_npi>; k1 { label = "k1"; @@ -104,25 +100,6 @@ status = "okay"; }; -&pio { - leds_npi: led_pins { - pins = "PA10"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_npi: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_npi: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts index f1fc6bdca8be..aa994e4a4abc 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts @@ -75,8 +75,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; status_led { label = "orangepi:red:status"; @@ -92,8 +90,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw2 { label = "sw2"; @@ -110,8 +106,6 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_pwrseq_pin_orangepi>; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */ }; }; @@ -179,30 +173,6 @@ }; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3", "PL4"; - function = "gpio_in"; - }; - - wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin { - pins = "PL7"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts index 476ae8e387ca..34d8e5d236c9 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -91,8 +89,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -160,25 +156,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts index 245fd658defb..a0026e03c295 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -166,25 +162,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 46240334128f..22393c135f06 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; pwr_led { label = "orangepi:green:pwr"; @@ -90,8 +88,6 @@ r_gpio_keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; sw4 { label = "sw4"; @@ -179,13 +175,6 @@ status = "okay"; }; -&pio { - leds_opc: led_pins { - pins = "PA15"; - function = "gpio_out"; - }; -}; - &r_i2c { status = "okay"; @@ -210,18 +199,6 @@ }; }; -&r_pio { - leds_r_opc: led_pins { - pins = "PL10"; - function = "gpio_out"; - }; - - sw_r_opc: key_pins { - pins = "PL3"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index ac8438c2cff1..97f497854e05 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -63,8 +63,6 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_pin_a>; regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -116,13 +114,6 @@ bias-pull-up; }; -&pio { - usb3_vbus_pin_a: usb3_vbus_pin { - pins = "PG11"; - function = "gpio_out"; - }; -}; - &r_i2c { status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 53104f4ccacc..3d9a1524e17e 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -54,16 +54,9 @@ backlight = <&backlight>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ power-supply = <®_dc1sw>; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - panel_input: endpoint@0 { - reg = <0>; + port { + panel_input: endpoint { remote-endpoint = <&tcon0_out_lcd>; }; }; @@ -120,13 +113,6 @@ status = "okay"; }; -&tcon0_out { - tcon0_out_lcd: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; -}; - &usbphy { usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts index 32cf1ab33aab..246dec5846a4 100644 --- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts +++ b/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts @@ -34,8 +34,6 @@ /* 2Gb Macronix MX30LF2G18AC (3V) */ nand@0 { - #address-cells = <1>; - #size-cells = <1>; reg = <0>; allwinner,rb = <0>; nand-ecc-mode = "hw"; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 316998e9ec5d..4f48eec6b2ef 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -158,14 +158,6 @@ status = "okay"; }; -&pio { - usb0_id_det: usb0-id-detect-pin { - pins = "PD10"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -314,10 +306,8 @@ &usbphy { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_det>; usb0_vbus-supply = <®_drivevbus>; - usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */ + usb0_id_det-gpios = <&pio 3 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD10 */ usb0_vbus_power-supply = <&usb_power_supply>; usb1_vbus-supply = <®_usb1_vbus>; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 06b685869f52..bb856e53b806 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -273,7 +273,6 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -285,7 +284,6 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; - phy-names = "usb"; status = "disabled"; }; @@ -296,7 +294,6 @@ clocks = <&ccu CLK_BUS_EHCI2>; resets = <&ccu RST_BUS_EHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -308,7 +305,6 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; - phy-names = "usb"; status = "disabled"; }; @@ -562,9 +558,7 @@ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; resets = <&ccu RST_BUS_SATA>; - resets-name = "ahci"; - #address-cells = <1>; - #size-cells = <0>; + reset-names = "ahci"; status = "disabled"; }; @@ -614,12 +608,9 @@ #size-cells = <0>; tcon_top_mixer0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon_top_mixer0_in_mixer0: endpoint@0 { - reg = <0>; + tcon_top_mixer0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon_top>; }; }; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 189e479eb95a..b3d8b8f056cd 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -86,14 +86,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0-id-detect-pin { - pins = "PH8"; - function = "gpio_in"; - bias-pull-up; - }; -}; - &r_rsb { status = "okay"; @@ -224,9 +216,7 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_id_det-gpios = <&pio 7 8 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH8 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts index 99c8cf7bb86c..2e4587d26ce5 100644 --- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts +++ b/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts @@ -96,6 +96,6 @@ }; &usbphy { - usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 21e1806ca509..df72b1719c34 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -129,12 +129,9 @@ #size-cells = <0>; mixer0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - mixer0_out_tcon0: endpoint@0 { - reg = <0>; + mixer0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_mixer0>; }; }; @@ -150,6 +147,7 @@ clock-names = "ahb", "tcon-ch0"; clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; resets = <&ccu RST_BUS_TCON0>; reset-names = "lcd"; status = "disabled"; @@ -159,12 +157,9 @@ #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_mixer0: endpoint@0 { - reg = <0>; + tcon0_in_mixer0: endpoint { remote-endpoint = <&mixer0_out_tcon0>; }; }; @@ -419,7 +414,7 @@ }; gic: interrupt-controller@1c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, <0x01c84000 0x2000>, diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index bf97f6244c23..f05cabd34b8e 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -105,6 +105,24 @@ #include "axp22x.dtsi" +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dldo2>; + vqmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -152,24 +170,6 @@ regulator-name = "vcc-wifi"; }; -&mmc0 { - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ - status = "okay"; -}; - -&mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pg_pins>; - vmmc-supply = <®_dldo2>; - vqmmc-supply = <®_dldo1>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index 28c034928d67..18156ffa3ce9 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -89,31 +89,23 @@ vga-dac { compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac"; vdd-supply = <®_dcdc1>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - vga_dac_in: endpoint@0 { - reg = <0>; + vga_dac_in: endpoint { remote-endpoint = <&tcon0_out_vga>; }; }; port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - vga_dac_out: endpoint@0 { - reg = <0>; + vga_dac_out: endpoint { remote-endpoint = <&vga_con_in>; }; }; @@ -502,8 +494,7 @@ }; &tcon0_out { - tcon0_out_vga: endpoint@0 { - reg = <0>; + tcon0_out_vga: endpoint { remote-endpoint = <&vga_dac_in>; }; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 864715ec3cb0..2ed28d9e2787 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -82,7 +82,7 @@ reg_usb1_vbus: usb1-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; @@ -91,7 +91,7 @@ reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; - pinctrl-names = "default"; + regulator-name = "usb3-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 6fb292e0b662..0c1eec9000e3 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -289,7 +289,7 @@ status = "disabled"; }; - soc { + soc@20000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -342,7 +342,6 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -354,7 +353,6 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; - phy-names = "usb"; status = "disabled"; }; @@ -376,7 +374,6 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; - phy-names = "usb"; status = "disabled"; }; @@ -406,7 +403,6 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -418,7 +414,6 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; - phy-names = "usb"; status = "disabled"; }; @@ -527,7 +522,7 @@ }; gic: interrupt-controller@1c41000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; reg = <0x01c41000 0x1000>, <0x01c42000 0x2000>, <0x01c44000 0x2000>, @@ -596,12 +591,9 @@ #size-cells = <0>; fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe0_out_deu0: endpoint@0 { - reg = <0>; + fe0_out_deu0: endpoint { remote-endpoint = <&deu0_in_fe0>; }; }; @@ -623,12 +615,9 @@ #size-cells = <0>; fe1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - fe1_out_deu1: endpoint@0 { - reg = <0>; + fe1_out_deu1: endpoint { remote-endpoint = <&deu1_in_fe1>; }; }; @@ -666,12 +655,9 @@ }; be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be0_out_drc0: endpoint@0 { - reg = <0>; + be0_out_drc0: endpoint { remote-endpoint = <&drc0_in_be0>; }; }; @@ -709,12 +695,9 @@ }; be1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - be1_out_drc1: endpoint@0 { - reg = <0>; + be1_out_drc1: endpoint { remote-endpoint = <&drc1_in_be1>; }; }; @@ -738,12 +721,9 @@ #size-cells = <0>; deu0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu0_in_fe0: endpoint@0 { - reg = <0>; + deu0_in_fe0: endpoint { remote-endpoint = <&fe0_out_deu0>; }; }; @@ -783,12 +763,9 @@ #size-cells = <0>; deu1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - deu1_in_fe1: endpoint@0 { - reg = <0>; + deu1_in_fe1: endpoint { remote-endpoint = <&fe1_out_deu1>; }; }; @@ -828,23 +805,17 @@ #size-cells = <0>; drc0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc0_in_be0: endpoint@0 { - reg = <0>; + drc0_in_be0: endpoint { remote-endpoint = <&be0_out_drc0>; }; }; drc0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc0_out_tcon0: endpoint@0 { - reg = <0>; + drc0_out_tcon0: endpoint { remote-endpoint = <&tcon0_in_drc0>; }; }; @@ -868,23 +839,17 @@ #size-cells = <0>; drc1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - drc1_in_be1: endpoint@0 { - reg = <0>; + drc1_in_be1: endpoint { remote-endpoint = <&be1_out_drc1>; }; }; drc1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; - drc1_out_tcon1: endpoint@0 { - reg = <0>; + drc1_out_tcon1: endpoint { remote-endpoint = <&tcon1_in_drc1>; }; }; @@ -900,25 +865,21 @@ resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>; reset-names = "lcd", "edp"; clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon0_in_drc0: endpoint@0 { - reg = <0>; + tcon0_in_drc0: endpoint { remote-endpoint = <&drc0_out_tcon0>; }; }; tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -938,19 +899,14 @@ #size-cells = <0>; tcon1_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - tcon1_in_drc1: endpoint@0 { - reg = <0>; + tcon1_in_drc1: endpoint { remote-endpoint = <&drc1_out_tcon1>; }; }; tcon1_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -997,15 +953,13 @@ gpio-controller; interrupt-controller; #interrupt-cells = <3>; - #size-cells = <0>; #gpio-cells = <3>; gmac_rgmii_pins: gmac-rgmii-pins { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA4", "PA5", "PA7", "PA8", - "PA9", "PA10", "PA12", "PA13", - "PA15", "PA16", "PA17"; - allwinner,function = "gmac"; + pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", + "PA7", "PA8", "PA9", "PA10", "PA12", + "PA13", "PA15", "PA16", "PA17"; + function = "gmac"; /* * data lines in RGMII mode use DDR mode * and need a higher signal drive strength diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c index b4037b603897..239084cf8192 100644 --- a/arch/arm/mach-sunxi/mc_smp.c +++ b/arch/arm/mach-sunxi/mc_smp.c @@ -89,6 +89,7 @@ static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) { struct device_node *node; int cpu = cluster * SUNXI_CPUS_PER_CLUSTER + core; + bool is_compatible; node = of_cpu_device_node_get(cpu); @@ -107,7 +108,9 @@ static bool sunxi_core_is_cortex_a15(unsigned int core, unsigned int cluster) return false; } - return of_device_is_compatible(node, "arm,cortex-a15"); + is_compatible = of_device_is_compatible(node, "arm,cortex-a15"); + of_node_put(node); + return is_compatible; } static int sunxi_cpu_power_switch_set(unsigned int cpu, unsigned int cluster, diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 8fb5088464db..bdde9ef3aaa9 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -50,6 +50,7 @@ static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus) } prcm_membase = of_iomap(node, 0); + of_node_put(node); if (!prcm_membase) { pr_err("Couldn't map A31 PRCM registers\n"); return; @@ -63,6 +64,7 @@ static void __init sun6i_smp_prepare_cpus(unsigned int max_cpus) } cpucfg_membase = of_iomap(node, 0); + of_node_put(node); if (!cpucfg_membase) pr_err("Couldn't map A31 CPU config registers\n"); @@ -133,6 +135,7 @@ static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) } prcm_membase = of_iomap(node, 0); + of_node_put(node); if (!prcm_membase) { pr_err("Couldn't map A23 PRCM registers\n"); return; @@ -146,6 +149,7 @@ static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) } cpucfg_membase = of_iomap(node, 0); + of_node_put(node); if (!cpucfg_membase) pr_err("Couldn't map A23 CPU config registers\n"); diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 7793ebb5d2b8..0a56c0c23ba1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -104,7 +104,7 @@ }; &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index c0b9cc7a6b3a..b7ac6374b178 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -80,7 +80,7 @@ }; &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index d22736a62481..78c82a665c84 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -94,7 +94,7 @@ }; &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index d2651f284aa0..9d20e13f0c02 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -48,7 +48,7 @@ #include <dt-bindings/gpio/gpio.h> &codec_analog { - hpvcc-supply = <®_eldo1>; + cpvdd-supply = <®_eldo1>; }; &mmc0 { |