Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...

24 files changed, 213 insertions, 87 deletions

diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
index 27b43fe099f1..8e1a1d1b282d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -183,3 +183,21 @@
 &i2c11 {
 	status = "okay";
 };
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t8103-j274.dts b/arch/arm64/boot/dts/apple/t8103-j274.dts
index 2cd429efba5b..c1f3ba9c39f6 100644
--- a/arch/arm64/boot/dts/apple/t8103-j274.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j274.dts
@@ -21,6 +21,10 @@
 	};
 };
 
+&wifi0 {
+	brcm,board-type = "apple,atlantisb";
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
diff --git a/arch/arm64/boot/dts/apple/t8103-j293.dts b/arch/arm64/boot/dts/apple/t8103-j293.dts
index 49cdf4b560a3..ecb10d237a05 100644
--- a/arch/arm64/boot/dts/apple/t8103-j293.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j293.dts
@@ -17,6 +17,10 @@
 	model = "Apple MacBook Pro (13-inch, M1, 2020)";
 };
 
+&wifi0 {
+	brcm,board-type = "apple,honshu";
+};
+
 /*
  * Remove unused PCIe ports and disable the associated DARTs.
  */
diff --git a/arch/arm64/boot/dts/apple/t8103-j313.dts b/arch/arm64/boot/dts/apple/t8103-j313.dts
index b0ebb45bdb6f..df741737b8e6 100644
--- a/arch/arm64/boot/dts/apple/t8103-j313.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j313.dts
@@ -17,6 +17,10 @@
 	model = "Apple MacBook Air (M1, 2020)";
 };
 
+&wifi0 {
+	brcm,board-type = "apple,shikoku";
+};
+
 /*
  * Remove unused PCIe ports and disable the associated DARTs.
  */
diff --git a/arch/arm64/boot/dts/apple/t8103-j456.dts b/arch/arm64/boot/dts/apple/t8103-j456.dts
index 884fddf7d363..8c6bf9592510 100644
--- a/arch/arm64/boot/dts/apple/t8103-j456.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j456.dts
@@ -21,6 +21,10 @@
 	};
 };
 
+&wifi0 {
+	brcm,board-type = "apple,capri";
+};
+
 &i2c0 {
 	hpm2: usb-pd@3b {
 		compatible = "apple,cd321x";
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index d7c622931627..fe7c0aaf7d62 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -21,6 +21,10 @@
 	};
 };
 
+&wifi0 {
+	brcm,board-type = "apple,santorini";
+};
+
 /*
  * Force the bus number assignments so that we can declare some of the
  * on-board devices and properties that are populated by the bootloader
diff --git a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
index fe2ae40fa9dd..3d15b8e2a6c1 100644
--- a/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103-jxxx.dtsi
@@ -71,8 +71,10 @@
 &port00 {
 	bus-range = <1 1>;
 	wifi0: network@0,0 {
+		compatible = "pci14e4,4425";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 00 00 00 00 00];
+		apple,antenna-sku = "XX";
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 4797537cb368..e6d7453e56e0 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -756,7 +756,7 @@
 		snps,mtl-tx-config = <&mtl_tx_setup>;
 		snps,txpbl = <1>;
 		snps,rxpbl = <1>;
-		clk_csr = <0>;
+		snps,clk-csr = <0>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index e3a407d03551..692102f6248d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -222,6 +222,28 @@
 			 #reset-cells = <1>;
 		};
 
+		wed_pcie: wed-pcie@10003000 {
+			compatible = "mediatek,mt7986-wed-pcie",
+				     "syscon";
+			reg = <0 0x10003000 0 0x10>;
+		};
+
+		wed0: wed@15010000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15010000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		wed1: wed@15011000 {
+			compatible = "mediatek,mt7986-wed",
+				     "syscon";
+			reg = <0 0x15011000 0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
 			reg = <0 0x15100000 0 0x80000>;
@@ -256,6 +278,8 @@
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
 			mediatek,ethsys = <&ethsys>;
 			mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+			mediatek,wed-pcie = <&wed_pcie>;
+			mediatek,wed = <&wed0>, <&wed1>;
 			#reset-cells = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 389623ae5a91..30f76178608b 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1970,7 +1970,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 				u32 flags, struct bpf_tramp_links *tlinks,
 				void *orig_call)
 {
-	int ret;
+	int i, ret;
 	int nargs = m->nr_args;
 	int max_insns = ((long)image_end - (long)image) / AARCH64_INSN_SIZE;
 	struct jit_ctx ctx = {
@@ -1982,6 +1982,12 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 	if (nargs > 8)
 		return -ENOTSUPP;
 
+	/* don't support struct argument */
+	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
+		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
+			return -ENOTSUPP;
+	}
+
 	ret = prepare_trampoline(&ctx, im, tlinks, orig_call, nargs, flags);
 	if (ret < 0)
 		return ret;
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
index 24eebc5a85b1..0128bd8fa7ed 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc1.dts
@@ -20,12 +20,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	palmbus: palmbus@1e000000 {
-		i2c@900 {
-			status = "okay";
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -53,7 +47,7 @@
 	};
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
index 34006e667780..7515555388ae 100644
--- a/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
+++ b/arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts
@@ -20,12 +20,6 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	palmbus: palmbus@1e000000 {
-		i2c@900 {
-			status = "okay";
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -35,9 +29,45 @@
 			linux,code = <KEY_RESTART>;
 		};
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		ethblack-green {
+			label = "green:ethblack";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		ethblue-green {
+			label = "green:ethblue";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		ethyellow-green {
+			label = "green:ethyellow";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+
+		ethyellow-orange {
+			label = "orange:ethyellow";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "green:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		system {
+			label = "green:system";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
@@ -83,12 +113,12 @@
 
 &gmac1 {
 	status = "okay";
-	phy-handle = <&ethphy7>;
+	phy-handle = <&ethphy5>;
 };
 
 &mdio {
-	ethphy7: ethernet-phy@7 {
-		reg = <7>;
+	ethphy5: ethernet-phy@5 {
+		reg = <5>;
 		phy-mode = "rgmii-rxid";
 	};
 };
diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
index ee46ace0bcc1..f3f4c1f26e01 100644
--- a/arch/mips/boot/dts/ralink/mt7621.dtsi
+++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
@@ -33,11 +33,6 @@
 		compatible = "mti,cpu-interrupt-controller";
 	};
 
-	aliases {
-		serial0 = &uartlite;
-	};
-
-
 	mmc_fixed_3v3: regulator-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc_power";
@@ -110,17 +105,16 @@
 			pinctrl-0 = <&i2c_pins>;
 		};
 
-		memc: syscon@5000 {
+		memc: memory-controller@5000 {
 			compatible = "mediatek,mt7621-memc", "syscon";
 			reg = <0x5000 0x1000>;
 		};
 
-		uartlite: uartlite@c00 {
+		serial0: serial@c00 {
 			compatible = "ns16550a";
 			reg = <0xc00 0x100>;
 
 			clocks = <&sysc MT7621_CLK_UART1>;
-			clock-names = "uart1";
 
 			interrupt-parent = <&gic>;
 			interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +230,7 @@
 		};
 	};
 
-	sdhci: sdhci@1e130000 {
+	mmc: mmc@1e130000 {
 		status = "disabled";
 
 		compatible = "mediatek,mt7620-mmc";
@@ -262,8 +256,8 @@
 		interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	xhci: xhci@1e1c0000 {
-		compatible = "mediatek,mt8173-xhci";
+	usb: usb@1e1c0000 {
+		compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
 		reg = <0x1e1c0000 0x1000
 		       0x1e1d0700 0x0100>;
 		reg-names = "mac", "ippc";
@@ -338,23 +332,22 @@
 		gmac1: mac@1 {
 			compatible = "mediatek,eth-mac";
 			reg = <1>;
-			status = "off";
-			phy-mode = "rgmii-rxid";
+			status = "disabled";
+			phy-mode = "rgmii";
 		};
 
 		mdio: mdio-bus {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			switch0: switch0@0 {
+			switch0: switch@1f {
 				compatible = "mediatek,mt7621";
-				reg = <0>;
+				reg = <0x1f>;
 				mediatek,mcm;
 				resets = <&sysc MT7621_RST_MCM>;
 				reset-names = "mcm";
 				interrupt-controller;
 				#interrupt-cells = <1>;
-				interrupt-parent = <&gic>;
 				interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
 
 				ports {
@@ -362,31 +355,31 @@
 					#size-cells = <0>;
 
 					port@0 {
-						status = "off";
+						status = "disabled";
 						reg = <0>;
 						label = "lan0";
 					};
 
 					port@1 {
-						status = "off";
+						status = "disabled";
 						reg = <1>;
 						label = "lan1";
 					};
 
 					port@2 {
-						status = "off";
+						status = "disabled";
 						reg = <2>;
 						label = "lan2";
 					};
 
 					port@3 {
-						status = "off";
+						status = "disabled";
 						reg = <3>;
 						label = "lan3";
 					};
 
 					port@4 {
-						status = "off";
+						status = "disabled";
 						reg = <4>;
 						label = "lan4";
 					};
diff --git a/arch/mips/configs/decstation_64_defconfig b/arch/mips/configs/decstation_64_defconfig
index 4f74c4bde9f6..49ec1575234e 100644
--- a/arch/mips/configs/decstation_64_defconfig
+++ b/arch/mips/configs/decstation_64_defconfig
@@ -49,8 +49,6 @@ CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_IP_SCTP=m
 CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_DECNET_ROUTER=y
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 # CONFIG_FW_LOADER is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index f0d0546ea1e5..5cec4c096e2c 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -45,8 +45,6 @@ CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_IP_SCTP=m
 CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_DECNET_ROUTER=y
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 # CONFIG_FW_LOADER is not set
diff --git a/arch/mips/configs/decstation_r4k_defconfig b/arch/mips/configs/decstation_r4k_defconfig
index df5ff9ddf8f4..af37e26d9b5b 100644
--- a/arch/mips/configs/decstation_r4k_defconfig
+++ b/arch/mips/configs/decstation_r4k_defconfig
@@ -44,8 +44,6 @@ CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
 CONFIG_IP_SCTP=m
 CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_DECNET_ROUTER=y
 # CONFIG_WIRELESS is not set
 # CONFIG_UEVENT_HELPER is not set
 # CONFIG_FW_LOADER is not set
diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig
index 7cd321b47d01..eb755650f821 100644
--- a/arch/mips/configs/gpr_defconfig
+++ b/arch/mips/configs/gpr_defconfig
@@ -66,7 +66,6 @@ CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_DECNET_NF_GRABULATOR=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -96,7 +95,6 @@ CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
 CONFIG_LLC2=m
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index efbfaa539938..edf9634aa8ee 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -112,7 +112,6 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_DECNET_NF_GRABULATOR=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -142,7 +141,6 @@ CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
 CONFIG_LLC2=m
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index d6981855221b..9932a593e3c3 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -112,7 +112,6 @@ CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_DECNET_NF_GRABULATOR=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -133,7 +132,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE=m
-CONFIG_DECNET=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
diff --git a/arch/mips/net/bpf_jit_comp32.c b/arch/mips/net/bpf_jit_comp32.c
index 83c975d5cca2..ace5db3fbd17 100644
--- a/arch/mips/net/bpf_jit_comp32.c
+++ b/arch/mips/net/bpf_jit_comp32.c
@@ -1377,11 +1377,19 @@ void build_prologue(struct jit_context *ctx)
 	int stack, saved, locals, reserved;
 
 	/*
+	 * In the unlikely event that the TCC limit is raised to more
+	 * than 16 bits, it is clamped to the maximum value allowed for
+	 * the generated code (0xffff). It is better fail to compile
+	 * instead of degrading gracefully.
+	 */
+	BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff);
+
+	/*
 	 * The first two instructions initialize TCC in the reserved (for us)
 	 * 16-byte area in the parent's stack frame. On a tail call, the
 	 * calling function jumps into the prologue after these instructions.
 	 */
-	emit(ctx, ori, MIPS_R_T9, MIPS_R_ZERO, min(MAX_TAIL_CALL_CNT, 0xffff));
+	emit(ctx, ori, MIPS_R_T9, MIPS_R_ZERO, MAX_TAIL_CALL_CNT);
 	emit(ctx, sw, MIPS_R_T9, 0, MIPS_R_SP);
 
 	/*
diff --git a/arch/mips/net/bpf_jit_comp64.c b/arch/mips/net/bpf_jit_comp64.c
index 6475828ffb36..0e7c1bdcf914 100644
--- a/arch/mips/net/bpf_jit_comp64.c
+++ b/arch/mips/net/bpf_jit_comp64.c
@@ -548,11 +548,19 @@ void build_prologue(struct jit_context *ctx)
 	int stack, saved, locals, reserved;
 
 	/*
+	 * In the unlikely event that the TCC limit is raised to more
+	 * than 16 bits, it is clamped to the maximum value allowed for
+	 * the generated code (0xffff). It is better fail to compile
+	 * instead of degrading gracefully.
+	 */
+	BUILD_BUG_ON(MAX_TAIL_CALL_CNT > 0xffff);
+
+	/*
 	 * The first instruction initializes the tail call count register.
 	 * On a tail call, the calling function jumps into the prologue
 	 * after this instruction.
 	 */
-	emit(ctx, ori, tc, MIPS_R_ZERO, min(MAX_TAIL_CALL_CNT, 0xffff));
+	emit(ctx, ori, tc, MIPS_R_ZERO, MAX_TAIL_CALL_CNT);
 
 	/* === Entry-point for tail calls === */
 
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index 91967824272e..a24f484bfbd2 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -243,8 +243,6 @@ CONFIG_ATM_LANE=m
 CONFIG_ATM_BR2684=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-CONFIG_DECNET=m
-CONFIG_DECNET_ROUTER=y
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5b53ecca1e15..088af7c84e5d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -287,6 +287,7 @@ config X86
 	select PROC_PID_ARCH_STATUS		if PROC_FS
 	select HAVE_ARCH_NODE_DEV_GROUP		if X86_SGX
 	imply IMA_SECURE_AND_OR_TRUSTED_BOOT    if EFI
+	select HAVE_DYNAMIC_FTRACE_NO_PATCHABLE
 
 config INSTRUCTION_DECODER
 	def_bool y
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 4922517ddb0d..99620428ad78 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -664,7 +664,7 @@ static void emit_mov_imm64(u8 **pprog, u32 dst_reg,
 		 */
 		emit_mov_imm32(&prog, false, dst_reg, imm32_lo);
 	} else {
-		/* movabsq %rax, imm64 */
+		/* movabsq rax, imm64 */
 		EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
 		EMIT(imm32_lo, 4);
 		EMIT(imm32_hi, 4);
@@ -1753,34 +1753,60 @@ emit_jmp:
 static void save_regs(const struct btf_func_model *m, u8 **prog, int nr_args,
 		      int stack_size)
 {
-	int i;
+	int i, j, arg_size, nr_regs;
 	/* Store function arguments to stack.
 	 * For a function that accepts two pointers the sequence will be:
 	 * mov QWORD PTR [rbp-0x10],rdi
 	 * mov QWORD PTR [rbp-0x8],rsi
 	 */
-	for (i = 0; i < min(nr_args, 6); i++)
-		emit_stx(prog, bytes_to_bpf_size(m->arg_size[i]),
-			 BPF_REG_FP,
-			 i == 5 ? X86_REG_R9 : BPF_REG_1 + i,
-			 -(stack_size - i * 8));
+	for (i = 0, j = 0; i < min(nr_args, 6); i++) {
+		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG) {
+			nr_regs = (m->arg_size[i] + 7) / 8;
+			arg_size = 8;
+		} else {
+			nr_regs = 1;
+			arg_size = m->arg_size[i];
+		}
+
+		while (nr_regs) {
+			emit_stx(prog, bytes_to_bpf_size(arg_size),
+				 BPF_REG_FP,
+				 j == 5 ? X86_REG_R9 : BPF_REG_1 + j,
+				 -(stack_size - j * 8));
+			nr_regs--;
+			j++;
+		}
+	}
 }
 
 static void restore_regs(const struct btf_func_model *m, u8 **prog, int nr_args,
 			 int stack_size)
 {
-	int i;
+	int i, j, arg_size, nr_regs;
 
 	/* Restore function arguments from stack.
 	 * For a function that accepts two pointers the sequence will be:
 	 * EMIT4(0x48, 0x8B, 0x7D, 0xF0); mov rdi,QWORD PTR [rbp-0x10]
 	 * EMIT4(0x48, 0x8B, 0x75, 0xF8); mov rsi,QWORD PTR [rbp-0x8]
 	 */
-	for (i = 0; i < min(nr_args, 6); i++)
-		emit_ldx(prog, bytes_to_bpf_size(m->arg_size[i]),
-			 i == 5 ? X86_REG_R9 : BPF_REG_1 + i,
-			 BPF_REG_FP,
-			 -(stack_size - i * 8));
+	for (i = 0, j = 0; i < min(nr_args, 6); i++) {
+		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG) {
+			nr_regs = (m->arg_size[i] + 7) / 8;
+			arg_size = 8;
+		} else {
+			nr_regs = 1;
+			arg_size = m->arg_size[i];
+		}
+
+		while (nr_regs) {
+			emit_ldx(prog, bytes_to_bpf_size(arg_size),
+				 j == 5 ? X86_REG_R9 : BPF_REG_1 + j,
+				 BPF_REG_FP,
+				 -(stack_size - j * 8));
+			nr_regs--;
+			j++;
+		}
+	}
 }
 
 static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
@@ -1812,6 +1838,9 @@ static int invoke_bpf_prog(const struct btf_func_model *m, u8 **pprog,
 	if (p->aux->sleepable) {
 		enter = __bpf_prog_enter_sleepable;
 		exit = __bpf_prog_exit_sleepable;
+	} else if (p->type == BPF_PROG_TYPE_STRUCT_OPS) {
+		enter = __bpf_prog_enter_struct_ops;
+		exit = __bpf_prog_exit_struct_ops;
 	} else if (p->expected_attach_type == BPF_LSM_CGROUP) {
 		enter = __bpf_prog_enter_lsm_cgroup;
 		exit = __bpf_prog_exit_lsm_cgroup;
@@ -2015,13 +2044,14 @@ static int invoke_bpf_mod_ret(const struct btf_func_model *m, u8 **pprog,
 int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *image_end,
 				const struct btf_func_model *m, u32 flags,
 				struct bpf_tramp_links *tlinks,
-				void *orig_call)
+				void *func_addr)
 {
-	int ret, i, nr_args = m->nr_args;
+	int ret, i, nr_args = m->nr_args, extra_nregs = 0;
 	int regs_off, ip_off, args_off, stack_size = nr_args * 8, run_ctx_off;
 	struct bpf_tramp_links *fentry = &tlinks[BPF_TRAMP_FENTRY];
 	struct bpf_tramp_links *fexit = &tlinks[BPF_TRAMP_FEXIT];
 	struct bpf_tramp_links *fmod_ret = &tlinks[BPF_TRAMP_MODIFY_RETURN];
+	void *orig_call = func_addr;
 	u8 **branches = NULL;
 	u8 *prog;
 	bool save_ret;
@@ -2030,6 +2060,14 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 	if (nr_args > 6)
 		return -ENOTSUPP;
 
+	for (i = 0; i < MAX_BPF_FUNC_ARGS; i++) {
+		if (m->arg_flags[i] & BTF_FMODEL_STRUCT_ARG)
+			extra_nregs += (m->arg_size[i] + 7) / 8 - 1;
+	}
+	if (nr_args + extra_nregs > 6)
+		return -ENOTSUPP;
+	stack_size += extra_nregs * 8;
+
 	/* Generated trampoline stack layout:
 	 *
 	 * RBP + 8         [ return address  ]
@@ -2042,7 +2080,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 	 *                 [ ...             ]
 	 * RBP - regs_off  [ reg_arg1        ]  program's ctx pointer
 	 *
-	 * RBP - args_off  [ args count      ]  always
+	 * RBP - args_off  [ arg regs count  ]  always
 	 *
 	 * RBP - ip_off    [ traced function ]  BPF_TRAMP_F_IP_ARG flag
 	 *
@@ -2085,21 +2123,19 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image, void *i
 	EMIT4(0x48, 0x83, 0xEC, stack_size); /* sub rsp, stack_size */
 	EMIT1(0x53);		 /* push rbx */
 
-	/* Store number of arguments of the traced function:
-	 *   mov rax, nr_args
+	/* Store number of argument registers of the traced function:
+	 *   mov rax, nr_args + extra_nregs
 	 *   mov QWORD PTR [rbp - args_off], rax
 	 */
-	emit_mov_imm64(&prog, BPF_REG_0, 0, (u32) nr_args);
+	emit_mov_imm64(&prog, BPF_REG_0, 0, (u32) nr_args + extra_nregs);
 	emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -args_off);
 
 	if (flags & BPF_TRAMP_F_IP_ARG) {
 		/* Store IP address of the traced function:
-		 * mov rax, QWORD PTR [rbp + 8]
-		 * sub rax, X86_PATCH_SIZE
+		 * movabsq rax, func_addr
 		 * mov QWORD PTR [rbp - ip_off], rax
 		 */
-		emit_ldx(&prog, BPF_DW, BPF_REG_0, BPF_REG_FP, 8);
-		EMIT4(0x48, 0x83, 0xe8, X86_PATCH_SIZE);
+		emit_mov_imm64(&prog, BPF_REG_0, (long) func_addr >> 32, (u32) (long) func_addr);
 		emit_stx(&prog, BPF_DW, BPF_REG_FP, BPF_REG_0, -ip_off);
 	}
 
@@ -2211,7 +2247,7 @@ cleanup:
 	return ret;
 }
 
-static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs)
+static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs, u8 *image, u8 *buf)
 {
 	u8 *jg_reloc, *prog = *pprog;
 	int pivot, err, jg_bytes = 1;
@@ -2227,12 +2263,12 @@ static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs)
 		EMIT2_off32(0x81, add_1reg(0xF8, BPF_REG_3),
 			    progs[a]);
 		err = emit_cond_near_jump(&prog,	/* je func */
-					  (void *)progs[a], prog,
+					  (void *)progs[a], image + (prog - buf),
 					  X86_JE);
 		if (err)
 			return err;
 
-		emit_indirect_jump(&prog, 2 /* rdx */, prog);
+		emit_indirect_jump(&prog, 2 /* rdx */, image + (prog - buf));
 
 		*pprog = prog;
 		return 0;
@@ -2257,7 +2293,7 @@ static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs)
 	jg_reloc = prog;
 
 	err = emit_bpf_dispatcher(&prog, a, a + pivot,	/* emit lower_part */
-				  progs);
+				  progs, image, buf);
 	if (err)
 		return err;
 
@@ -2271,7 +2307,7 @@ static int emit_bpf_dispatcher(u8 **pprog, int a, int b, s64 *progs)
 	emit_code(jg_reloc - jg_bytes, jg_offset, jg_bytes);
 
 	err = emit_bpf_dispatcher(&prog, a + pivot + 1,	/* emit upper_part */
-				  b, progs);
+				  b, progs, image, buf);
 	if (err)
 		return err;
 
@@ -2291,12 +2327,12 @@ static int cmp_ips(const void *a, const void *b)
 	return 0;
 }
 
-int arch_prepare_bpf_dispatcher(void *image, s64 *funcs, int num_funcs)
+int arch_prepare_bpf_dispatcher(void *image, void *buf, s64 *funcs, int num_funcs)
 {
-	u8 *prog = image;
+	u8 *prog = buf;
 
 	sort(funcs, num_funcs, sizeof(funcs[0]), cmp_ips, NULL);
-	return emit_bpf_dispatcher(&prog, 0, num_funcs - 1, funcs);
+	return emit_bpf_dispatcher(&prog, 0, num_funcs - 1, funcs, image, buf);
 }
 
 struct x64_jit_data {