summaryrefslogtreecommitdiff
path: root/drivers/auxdisplay
diff options
context:
space:
mode:
authorAndy Shevchenko <andriy.shevchenko@linux.intel.com>2017-04-04 20:25:21 +0300
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2017-04-08 17:48:20 +0200
commit51c1e9b554c996284d5d3bd44da829f41a49a21b (patch)
tree44f3ebc0fb654b1fae9e230625ebcb495bcefb69 /drivers/auxdisplay
parent6ef0c3337ac9a0a963208beed92d478a317d7888 (diff)
auxdisplay: Move panel.c to drivers/auxdisplay folder
It looks like panel.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/auxdisplay')
-rw-r--r--drivers/auxdisplay/Kconfig280
-rw-r--r--drivers/auxdisplay/Makefile1
-rw-r--r--drivers/auxdisplay/panel.c1796
3 files changed, 2077 insertions, 0 deletions
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index c317dc515617..ad83a0598c67 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -156,3 +156,283 @@ config HT16K33
LED controller driver with keyscan.
endif # AUXDISPLAY
+
+config PANEL
+ tristate "Parallel port LCD/Keypad Panel support"
+ depends on PARPORT
+ select CHARLCD
+ ---help---
+ Say Y here if you have an HD44780 or KS-0074 LCD connected to your
+ parallel port. This driver also features 4 and 6-key keypads. The LCD
+ is accessible through the /dev/lcd char device (10, 156), and the
+ keypad through /dev/keypad (10, 185). This code can either be
+ compiled as a module, or linked into the kernel and started at boot.
+ If you don't understand what all this is about, say N.
+
+if PANEL
+
+config PANEL_PARPORT
+ int "Default parallel port number (0=LPT1)"
+ range 0 255
+ default "0"
+ ---help---
+ This is the index of the parallel port the panel is connected to. One
+ driver instance only supports one parallel port, so if your keypad
+ and LCD are connected to two separate ports, you have to start two
+ modules with different arguments. Numbering starts with '0' for LPT1,
+ and so on.
+
+config PANEL_PROFILE
+ int "Default panel profile (0-5, 0=custom)"
+ range 0 5
+ default "5"
+ ---help---
+ To ease configuration, the driver supports different configuration
+ profiles for past and recent wirings. These profiles can also be
+ used to define an approximative configuration, completed by a few
+ other options. Here are the profiles :
+
+ 0 = custom (see further)
+ 1 = 2x16 parallel LCD, old keypad
+ 2 = 2x16 serial LCD (KS-0074), new keypad
+ 3 = 2x16 parallel LCD (Hantronix), no keypad
+ 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad
+ 5 = 2x40 parallel LCD (old one), with old keypad
+
+ Custom configurations allow you to define how your display is
+ wired to the parallel port, and how it works. This is only intended
+ for experts.
+
+config PANEL_KEYPAD
+ depends on PANEL_PROFILE="0"
+ int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)"
+ range 0 3
+ default 0
+ ---help---
+ This enables and configures a keypad connected to the parallel port.
+ The keys will be read from character device 10,185. Valid values are :
+
+ 0 : do not enable this driver
+ 1 : old 6 keys keypad
+ 2 : new 6 keys keypad, as used on the server at www.ant-computing.com
+ 3 : Nexcom NSA1045's 4 keys keypad
+
+ New profiles can be described in the driver source. The driver also
+ supports simultaneous keys pressed when the keypad supports them.
+
+config PANEL_LCD
+ depends on PANEL_PROFILE="0"
+ int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)"
+ range 0 5
+ default 0
+ ---help---
+ This enables and configures an LCD connected to the parallel port.
+ The driver includes an interpreter for escape codes starting with
+ '\e[L' which are specific to the LCD, and a few ANSI codes. The
+ driver will be registered as character device 10,156, usually
+ under the name '/dev/lcd'. There are a total of 6 supported types :
+
+ 0 : do not enable the driver
+ 1 : custom configuration and wiring (see further)
+ 2 : 2x16 & 2x40 parallel LCD (old wiring)
+ 3 : 2x16 serial LCD (KS-0074 based)
+ 4 : 2x16 parallel LCD (Hantronix wiring)
+ 5 : 2x16 parallel LCD (Nexcom wiring)
+
+ When type '1' is specified, other options will appear to configure
+ more precise aspects (wiring, dimensions, protocol, ...). Please note
+ that those values changed from the 2.4 driver for better consistency.
+
+config PANEL_LCD_HEIGHT
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Number of lines on the LCD (1-2)"
+ range 1 2
+ default 2
+ ---help---
+ This is the number of visible character lines on the LCD in custom profile.
+ It can either be 1 or 2.
+
+config PANEL_LCD_WIDTH
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Number of characters per line on the LCD (1-40)"
+ range 1 40
+ default 40
+ ---help---
+ This is the number of characters per line on the LCD in custom profile.
+ Common values are 16,20,24,40.
+
+config PANEL_LCD_BWIDTH
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Internal LCD line width (1-40, 40 by default)"
+ range 1 40
+ default 40
+ ---help---
+ Most LCDs use a standard controller which supports hardware lines of 40
+ characters, although sometimes only 16, 20 or 24 of them are really wired
+ to the terminal. This results in some non-visible but addressable characters,
+ and is the case for most parallel LCDs. Other LCDs, and some serial ones,
+ however, use the same line width internally as what is visible. The KS0074
+ for example, uses 16 characters per line for 16 visible characters per line.
+
+ This option lets you configure the value used by your LCD in 'custom' profile.
+ If you don't know, put '40' here.
+
+config PANEL_LCD_HWIDTH
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Hardware LCD line width (1-64, 64 by default)"
+ range 1 64
+ default 64
+ ---help---
+ Most LCDs use a single address bit to differentiate line 0 and line 1. Since
+ some of them need to be able to address 40 chars with the lower bits, they
+ often use the immediately superior power of 2, which is 64, to address the
+ next line.
+
+ If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and
+ 64 here for a 2x40.
+
+config PANEL_LCD_CHARSET
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "LCD character set (0=normal, 1=KS0074)"
+ range 0 1
+ default 0
+ ---help---
+ Some controllers such as the KS0074 use a somewhat strange character set
+ where many symbols are at unusual places. The driver knows how to map
+ 'standard' ASCII characters to the character sets used by these controllers.
+ Valid values are :
+
+ 0 : normal (untranslated) character set
+ 1 : KS0074 character set
+
+ If you don't know, use the normal one (0).
+
+config PANEL_LCD_PROTO
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "LCD communication mode (0=parallel 8 bits, 1=serial)"
+ range 0 1
+ default 0
+ ---help---
+ This driver now supports any serial or parallel LCD wired to a parallel
+ port. But before assigning signals, the driver needs to know if it will
+ be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires
+ (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals
+ (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits
+ parallel LCD, and 1 for a serial LCD.
+
+config PANEL_LCD_PIN_E
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
+ range -17 17
+ default 14
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'E'
+ signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'E' pin in custom profile is '14' (AUTOFEED).
+
+config PANEL_LCD_PIN_RS
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
+ range -17 17
+ default 17
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'RS'
+ signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'RS' pin in custom profile is '17' (SELECT IN).
+
+config PANEL_LCD_PIN_RW
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"
+ int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
+ range -17 17
+ default 16
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'RW'
+ signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'RW' pin in custom profile is '16' (INIT).
+
+config PANEL_LCD_PIN_SCL
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
+ int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
+ range -17 17
+ default 1
+ ---help---
+ This describes the number of the parallel port pin to which the serial
+ LCD 'SCL' signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'SCL' pin in custom profile is '1' (STROBE).
+
+config PANEL_LCD_PIN_SDA
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"
+ int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
+ range -17 17
+ default 2
+ ---help---
+ This describes the number of the parallel port pin to which the serial
+ LCD 'SDA' signal has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'SDA' pin in custom profile is '2' (D0).
+
+config PANEL_LCD_PIN_BL
+ depends on PANEL_PROFILE="0" && PANEL_LCD="1"
+ int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
+ range -17 17
+ default 0
+ ---help---
+ This describes the number of the parallel port pin to which the LCD 'BL' signal
+ has been connected. It can be :
+
+ 0 : no connection (eg: connected to ground)
+ 1..17 : directly connected to any of these pins on the DB25 plug
+ -1..-17 : connected to the same pin through an inverter (eg: transistor).
+
+ Default for the 'BL' pin in custom profile is '0' (uncontrolled).
+
+config PANEL_CHANGE_MESSAGE
+ bool "Change LCD initialization message ?"
+ default "n"
+ ---help---
+ This allows you to replace the boot message indicating the kernel version
+ and the driver version with a custom message. This is useful on appliances
+ where a simple 'Starting system' message can be enough to stop a customer
+ from worrying.
+
+ If you say 'Y' here, you'll be able to choose a message yourself. Otherwise,
+ say 'N' and keep the default message with the version.
+
+config PANEL_BOOT_MESSAGE
+ depends on PANEL_CHANGE_MESSAGE="y"
+ string "New initialization message"
+ default ""
+ ---help---
+ This allows you to replace the boot message indicating the kernel version
+ and the driver version with a custom message. This is useful on appliances
+ where a simple 'Starting system' message can be enough to stop a customer
+ from worrying.
+
+ An empty message will only clear the display at driver init time. Any other
+ printf()-formatted message is valid with newline and escape codes.
+
+endif # PANEL
diff --git a/drivers/auxdisplay/Makefile b/drivers/auxdisplay/Makefile
index fcefa686be0f..58c25e5ece84 100644
--- a/drivers/auxdisplay/Makefile
+++ b/drivers/auxdisplay/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_CFAG12864B) += cfag12864b.o cfag12864bfb.o
obj-$(CONFIG_IMG_ASCII_LCD) += img-ascii-lcd.o
obj-$(CONFIG_HD44780) += hd44780.o
obj-$(CONFIG_HT16K33) += ht16k33.o
+obj-$(CONFIG_PANEL) += panel.o
diff --git a/drivers/auxdisplay/panel.c b/drivers/auxdisplay/panel.c
new file mode 100644
index 000000000000..e0c014c2356f
--- /dev/null
+++ b/drivers/auxdisplay/panel.c
@@ -0,0 +1,1796 @@
+/*
+ * Front panel driver for Linux
+ * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu>
+ * Copyright (C) 2016-2017 Glider bvba
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This code drives an LCD module (/dev/lcd), and a keypad (/dev/keypad)
+ * connected to a parallel printer port.
+ *
+ * The LCD module may either be an HD44780-like 8-bit parallel LCD, or a 1-bit
+ * serial module compatible with Samsung's KS0074. The pins may be connected in
+ * any combination, everything is programmable.
+ *
+ * The keypad consists in a matrix of push buttons connecting input pins to
+ * data output pins or to the ground. The combinations have to be hard-coded
+ * in the driver, though several profiles exist and adding new ones is easy.
+ *
+ * Several profiles are provided for commonly found LCD+keypad modules on the
+ * market, such as those found in Nexcom's appliances.
+ *
+ * FIXME:
+ * - the initialization/deinitialization process is very dirty and should
+ * be rewritten. It may even be buggy.
+ *
+ * TODO:
+ * - document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs)
+ * - make the LCD a part of a virtual screen of Vx*Vy
+ * - make the inputs list smp-safe
+ * - change the keyboard to a double mapping : signals -> key_id -> values
+ * so that applications can change values without knowing signals
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/parport.h>
+#include <linux/list.h>
+
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <misc/charlcd.h>
+
+#define KEYPAD_MINOR 185
+
+#define LCD_MAXBYTES 256 /* max burst write */
+
+#define KEYPAD_BUFFER 64
+
+/* poll the keyboard this every second */
+#define INPUT_POLL_TIME (HZ / 50)
+/* a key starts to repeat after this times INPUT_POLL_TIME */
+#define KEYPAD_REP_START (10)
+/* a key repeats this times INPUT_POLL_TIME */
+#define KEYPAD_REP_DELAY (2)
+
+/* converts an r_str() input to an active high, bits string : 000BAOSE */
+#define PNL_PINPUT(a) ((((unsigned char)(a)) ^ 0x7F) >> 3)
+
+#define PNL_PBUSY 0x80 /* inverted input, active low */
+#define PNL_PACK 0x40 /* direct input, active low */
+#define PNL_POUTPA 0x20 /* direct input, active high */
+#define PNL_PSELECD 0x10 /* direct input, active high */
+#define PNL_PERRORP 0x08 /* direct input, active low */
+
+#define PNL_PBIDIR 0x20 /* bi-directional ports */
+/* high to read data in or-ed with data out */
+#define PNL_PINTEN 0x10
+#define PNL_PSELECP 0x08 /* inverted output, active low */
+#define PNL_PINITP 0x04 /* direct output, active low */
+#define PNL_PAUTOLF 0x02 /* inverted output, active low */
+#define PNL_PSTROBE 0x01 /* inverted output */
+
+#define PNL_PD0 0x01
+#define PNL_PD1 0x02
+#define PNL_PD2 0x04
+#define PNL_PD3 0x08
+#define PNL_PD4 0x10
+#define PNL_PD5 0x20
+#define PNL_PD6 0x40
+#define PNL_PD7 0x80
+
+#define PIN_NONE 0
+#define PIN_STROBE 1
+#define PIN_D0 2
+#define PIN_D1 3
+#define PIN_D2 4
+#define PIN_D3 5
+#define PIN_D4 6
+#define PIN_D5 7
+#define PIN_D6 8
+#define PIN_D7 9
+#define PIN_AUTOLF 14
+#define PIN_INITP 16
+#define PIN_SELECP 17
+#define PIN_NOT_SET 127
+
+#define NOT_SET -1
+
+/* macros to simplify use of the parallel port */
+#define r_ctr(x) (parport_read_control((x)->port))
+#define r_dtr(x) (parport_read_data((x)->port))
+#define r_str(x) (parport_read_status((x)->port))
+#define w_ctr(x, y) (parport_write_control((x)->port, (y)))
+#define w_dtr(x, y) (parport_write_data((x)->port, (y)))
+
+/* this defines which bits are to be used and which ones to be ignored */
+/* logical or of the output bits involved in the scan matrix */
+static __u8 scan_mask_o;
+/* logical or of the input bits involved in the scan matrix */
+static __u8 scan_mask_i;
+
+enum input_type {
+ INPUT_TYPE_STD,
+ INPUT_TYPE_KBD,
+};
+
+enum input_state {
+ INPUT_ST_LOW,
+ INPUT_ST_RISING,
+ INPUT_ST_HIGH,
+ INPUT_ST_FALLING,
+};
+
+struct logical_input {
+ struct list_head list;
+ __u64 mask;
+ __u64 value;
+ enum input_type type;
+ enum input_state state;
+ __u8 rise_time, fall_time;
+ __u8 rise_timer, fall_timer, high_timer;
+
+ union {
+ struct { /* valid when type == INPUT_TYPE_STD */
+ void (*press_fct)(int);
+ void (*release_fct)(int);
+ int press_data;
+ int release_data;
+ } std;
+ struct { /* valid when type == INPUT_TYPE_KBD */
+ /* strings can be non null-terminated */
+ char press_str[sizeof(void *) + sizeof(int)];
+ char repeat_str[sizeof(void *) + sizeof(int)];
+ char release_str[sizeof(void *) + sizeof(int)];
+ } kbd;
+ } u;
+};
+
+static LIST_HEAD(logical_inputs); /* list of all defined logical inputs */
+
+/* physical contacts history
+ * Physical contacts are a 45 bits string of 9 groups of 5 bits each.
+ * The 8 lower groups correspond to output bits 0 to 7, and the 9th group
+ * corresponds to the ground.
+ * Within each group, bits are stored in the same order as read on the port :
+ * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0).
+ * So, each __u64 is represented like this :
+ * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE
+ * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00>
+ */
+
+/* what has just been read from the I/O ports */
+static __u64 phys_read;
+/* previous phys_read */
+static __u64 phys_read_prev;
+/* stabilized phys_read (phys_read|phys_read_prev) */
+static __u64 phys_curr;
+/* previous phys_curr */
+static __u64 phys_prev;
+/* 0 means that at least one logical signal needs be computed */
+static char inputs_stable;
+
+/* these variables are specific to the keypad */
+static struct {
+ bool enabled;
+} keypad;
+
+static char keypad_buffer[KEYPAD_BUFFER];
+static int keypad_buflen;
+static int keypad_start;
+static char keypressed;
+static wait_queue_head_t keypad_read_wait;
+
+/* lcd-specific variables */
+static struct {
+ bool enabled;
+ bool initialized;
+
+ int charset;
+ int proto;
+
+ /* TODO: use union here? */
+ struct {
+ int e;
+ int rs;
+ int rw;
+ int cl;
+ int da;
+ int bl;
+ } pins;
+
+ struct charlcd *charlcd;
+} lcd;
+
+/* Needed only for init */
+static int selected_lcd_type = NOT_SET;
+
+/*
+ * Bit masks to convert LCD signals to parallel port outputs.
+ * _d_ are values for data port, _c_ are for control port.
+ * [0] = signal OFF, [1] = signal ON, [2] = mask
+ */
+#define BIT_CLR 0
+#define BIT_SET 1
+#define BIT_MSK 2
+#define BIT_STATES 3
+/*
+ * one entry for each bit on the LCD
+ */
+#define LCD_BIT_E 0
+#define LCD_BIT_RS 1
+#define LCD_BIT_RW 2
+#define LCD_BIT_BL 3
+#define LCD_BIT_CL 4
+#define LCD_BIT_DA 5
+#define LCD_BITS 6
+
+/*
+ * each bit can be either connected to a DATA or CTRL port
+ */
+#define LCD_PORT_C 0
+#define LCD_PORT_D 1
+#define LCD_PORTS 2
+
+static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES];
+
+/*
+ * LCD protocols
+ */
+#define LCD_PROTO_PARALLEL 0
+#define LCD_PROTO_SERIAL 1
+#define LCD_PROTO_TI_DA8XX_LCD 2
+
+/*
+ * LCD character sets
+ */
+#define LCD_CHARSET_NORMAL 0
+#define LCD_CHARSET_KS0074 1
+
+/*
+ * LCD types
+ */
+#define LCD_TYPE_NONE 0
+#define LCD_TYPE_CUSTOM 1
+#define LCD_TYPE_OLD 2
+#define LCD_TYPE_KS0074 3
+#define LCD_TYPE_HANTRONIX 4
+#define LCD_TYPE_NEXCOM 5
+
+/*
+ * keypad types
+ */
+#define KEYPAD_TYPE_NONE 0
+#define KEYPAD_TYPE_OLD 1
+#define KEYPAD_TYPE_NEW 2
+#define KEYPAD_TYPE_NEXCOM 3
+
+/*
+ * panel profiles
+ */
+#define PANEL_PROFILE_CUSTOM 0
+#define PANEL_PROFILE_OLD 1
+#define PANEL_PROFILE_NEW 2
+#define PANEL_PROFILE_HANTRONIX 3
+#define PANEL_PROFILE_NEXCOM 4
+#define PANEL_PROFILE_LARGE 5
+
+/*
+ * Construct custom config from the kernel's configuration
+ */
+#define DEFAULT_PARPORT 0
+#define DEFAULT_PROFILE PANEL_PROFILE_LARGE
+#define DEFAULT_KEYPAD_TYPE KEYPAD_TYPE_OLD
+#define DEFAULT_LCD_TYPE LCD_TYPE_OLD
+#define DEFAULT_LCD_HEIGHT 2
+#define DEFAULT_LCD_WIDTH 40
+#define DEFAULT_LCD_BWIDTH 40
+#define DEFAULT_LCD_HWIDTH 64
+#define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL
+#define DEFAULT_LCD_PROTO LCD_PROTO_PARALLEL
+
+#define DEFAULT_LCD_PIN_E PIN_AUTOLF
+#define DEFAULT_LCD_PIN_RS PIN_SELECP
+#define DEFAULT_LCD_PIN_RW PIN_INITP
+#define DEFAULT_LCD_PIN_SCL PIN_STROBE
+#define DEFAULT_LCD_PIN_SDA PIN_D0
+#define DEFAULT_LCD_PIN_BL PIN_NOT_SET
+
+#ifdef CONFIG_PANEL_PARPORT
+#undef DEFAULT_PARPORT
+#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT
+#endif
+
+#ifdef CONFIG_PANEL_PROFILE
+#undef DEFAULT_PROFILE
+#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE
+#endif
+
+#if DEFAULT_PROFILE == 0 /* custom */
+#ifdef CONFIG_PANEL_KEYPAD
+#undef DEFAULT_KEYPAD_TYPE
+#define DEFAULT_KEYPAD_TYPE CONFIG_PANEL_KEYPAD
+#endif
+
+#ifdef CONFIG_PANEL_LCD
+#undef DEFAULT_LCD_TYPE
+#define DEFAULT_LCD_TYPE CONFIG_PANEL_LCD
+#endif
+
+#ifdef CONFIG_PANEL_LCD_HEIGHT
+#undef DEFAULT_LCD_HEIGHT
+#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT
+#endif
+
+#ifdef CONFIG_PANEL_LCD_WIDTH
+#undef DEFAULT_LCD_WIDTH
+#define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH
+#endif
+
+#ifdef CONFIG_PANEL_LCD_BWIDTH
+#undef DEFAULT_LCD_BWIDTH
+#define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH
+#endif
+
+#ifdef CONFIG_PANEL_LCD_HWIDTH
+#undef DEFAULT_LCD_HWIDTH
+#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH
+#endif
+
+#ifdef CONFIG_PANEL_LCD_CHARSET
+#undef DEFAULT_LCD_CHARSET
+#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PROTO
+#undef DEFAULT_LCD_PROTO
+#define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_E
+#undef DEFAULT_LCD_PIN_E
+#define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_RS
+#undef DEFAULT_LCD_PIN_RS
+#define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_RW
+#undef DEFAULT_LCD_PIN_RW
+#define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_SCL
+#undef DEFAULT_LCD_PIN_SCL
+#define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_SDA
+#undef DEFAULT_LCD_PIN_SDA
+#define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA
+#endif
+
+#ifdef CONFIG_PANEL_LCD_PIN_BL
+#undef DEFAULT_LCD_PIN_BL
+#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL
+#endif
+
+#endif /* DEFAULT_PROFILE == 0 */
+
+/* global variables */
+
+/* Device single-open policy control */
+static atomic_t keypad_available = ATOMIC_INIT(1);
+
+static struct pardevice *pprt;
+
+static int keypad_initialized;
+
+static DEFINE_SPINLOCK(pprt_lock);
+static struct timer_list scan_timer;
+
+MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver");
+
+static int parport = DEFAULT_PARPORT;
+module_param(parport, int, 0000);
+MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)");
+
+static int profile = DEFAULT_PROFILE;
+module_param(profile, int, 0000);
+MODULE_PARM_DESC(profile,
+ "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
+ "4=16x2 nexcom; default=40x2, old kp");
+
+static int keypad_type = NOT_SET;
+module_param(keypad_type, int, 0000);
+MODULE_PARM_DESC(keypad_type,
+ "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");
+
+static int lcd_type = NOT_SET;
+module_param(lcd_type, int, 0000);
+MODULE_PARM_DESC(lcd_type,
+ "LCD type: 0=none, 1=compiled-in, 2=old, 3=serial ks0074, 4=hantronix, 5=nexcom");
+
+static int lcd_height = NOT_SET;
+module_param(lcd_height, int, 0000);
+MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD");
+
+static int lcd_width = NOT_SET;
+module_param(lcd_width, int, 0000);
+MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD");
+
+static int lcd_bwidth = NOT_SET; /* internal buffer width (usually 40) */
+module_param(lcd_bwidth, int, 0000);
+MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)");
+
+static int lcd_hwidth = NOT_SET; /* hardware buffer width (usually 64) */
+module_param(lcd_hwidth, int, 0000);
+MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)");
+
+static int lcd_charset = NOT_SET;
+module_param(lcd_charset, int, 0000);
+MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");
+
+static int lcd_proto = NOT_SET;
+module_param(lcd_proto, int, 0000);
+MODULE_PARM_DESC(lcd_proto,
+ "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface");
+
+/*
+ * These are the parallel port pins the LCD control signals are connected to.
+ * Set this to 0 if the signal is not used. Set it to its opposite value
+ * (negative) if the signal is negated. -MAXINT is used to indicate that the
+ * pin has not been explicitly specified.
+ *
+ * WARNING! no check will be performed about collisions with keypad !
+ */
+
+static int lcd_e_pin = PIN_NOT_SET;
+module_param(lcd_e_pin, int, 0000);
+MODULE_PARM_DESC(lcd_e_pin,
+ "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)");
+
+static int lcd_rs_pin = PIN_NOT_SET;
+module_param(lcd_rs_pin, int, 0000);
+MODULE_PARM_DESC(lcd_rs_pin,
+ "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)");
+
+static int lcd_rw_pin = PIN_NOT_SET;
+module_param(lcd_rw_pin, int, 0000);
+MODULE_PARM_DESC(lcd_rw_pin,
+ "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");
+
+static int lcd_cl_pin = PIN_NOT_SET;
+module_param(lcd_cl_pin, int, 0000);
+MODULE_PARM_DESC(lcd_cl_pin,
+ "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");
+
+static int lcd_da_pin = PIN_NOT_SET;
+module_param(lcd_da_pin, int, 0000);
+MODULE_PARM_DESC(lcd_da_pin,
+ "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");
+
+static int lcd_bl_pin = PIN_NOT_SET;
+module_param(lcd_bl_pin, int, 0000);
+MODULE_PARM_DESC(lcd_bl_pin,
+ "# of the // port pin connected to LCD backlight, with polarity (-17..17)");
+
+/* Deprecated module parameters - consider not using them anymore */
+
+static int lcd_enabled = NOT_SET;
+module_param(lcd_enabled, int, 0000);
+MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");
+
+static int keypad_enabled = NOT_SET;
+module_param(keypad_enabled, int, 0000);
+MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");
+
+/* for some LCD drivers (ks0074) we need a charset conversion table. */
+static const unsigned char lcd_char_conv_ks0074[256] = {
+ /* 0|8 1|9 2|A 3|B 4|C 5|D 6|E 7|F */
+ /* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
+ /* 0x08 */ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
+ /* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ /* 0x18 */ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
+ /* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27,
+ /* 0x28 */ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
+ /* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
+ /* 0x38 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
+ /* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
+ /* 0x48 */ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+ /* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
+ /* 0x58 */ 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4,
+ /* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
+ /* 0x68 */ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
+ /* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
+ /* 0x78 */ 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20,
+ /* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
+ /* 0x88 */ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
+ /* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
+ /* 0x98 */ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
+ /* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f,
+ /* 0xA8 */ 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96,
+ /* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd,
+ /* 0xB8 */ 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60,
+ /* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9,
+ /* 0xC8 */ 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3,
+ /* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78,
+ /* 0xD8 */ 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe,
+ /* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8,
+ /* 0xE8 */ 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69,
+ /* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25,
+ /* 0xF8 */ 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79,
+};
+
+static const char old_keypad_profile[][4][9] = {
+ {"S0", "Left\n", "Left\n", ""},
+ {"S1", "Down\n", "Down\n", ""},
+ {"S2", "Up\n", "Up\n", ""},
+ {"S3", "Right\n", "Right\n", ""},
+ {"S4", "Esc\n", "Esc\n", ""},
+ {"S5", "Ret\n", "Ret\n", ""},
+ {"", "", "", ""}
+};
+
+/* signals, press, repeat, release */
+static const char new_keypad_profile[][4][9] = {
+ {"S0", "Left\n", "Left\n", ""},
+ {"S1", "Down\n", "Down\n", ""},
+ {"S2", "Up\n", "Up\n", ""},
+ {"S3", "Right\n", "Right\n", ""},
+ {"S4s5", "", "Esc\n", "Esc\n"},
+ {"s4S5", "", "Ret\n", "Ret\n"},
+ {"S4S5", "Help\n", "", ""},
+ /* add new signals above this line */
+ {"", "", "", ""}
+};
+
+/* signals, press, repeat, release */
+static const char nexcom_keypad_profile[][4][9] = {
+ {"a-p-e-", "Down\n", "Down\n", ""},
+ {"a-p-E-", "Ret\n", "Ret\n", ""},
+ {"a-P-E-", "Esc\n", "Esc\n", ""},
+ {"a-P-e-", "Up\n", "Up\n", ""},
+ /* add new signals above this line */
+ {"", "", "", ""}
+};
+
+static const char (*keypad_profile)[4][9] = old_keypad_profile;
+
+static DECLARE_BITMAP(bits, LCD_BITS);
+
+static void lcd_get_bits(unsigned int port, int *val)
+{
+ unsigned int bit, state;
+
+ for (bit = 0; bit < LCD_BITS; bit++) {
+ state = test_bit(bit, bits) ? BIT_SET : BIT_CLR;
+ *val &= lcd_bits[port][bit][BIT_MSK];
+ *val |= lcd_bits[port][bit][state];
+ }
+}
+
+/* sets data port bits according to current signals values */
+static int set_data_bits(void)
+{
+ int val;
+
+ val = r_dtr(pprt);
+ lcd_get_bits(LCD_PORT_D, &val);
+ w_dtr(pprt, val);
+ return val;
+}
+
+/* sets ctrl port bits according to current signals values */
+static int set_ctrl_bits(void)
+{
+ int val;
+
+ val = r_ctr(pprt);
+ lcd_get_bits(LCD_PORT_C, &val);
+ w_ctr(pprt, val);
+ return val;
+}
+
+/* sets ctrl & data port bits according to current signals values */
+static void panel_set_bits(void)
+{
+ set_data_bits();
+ set_ctrl_bits();
+}
+
+/*
+ * Converts a parallel port pin (from -25 to 25) to data and control ports
+ * masks, and data and control port bits. The signal will be considered
+ * unconnected if it's on pin 0 or an invalid pin (<-25 or >25).
+ *
+ * Result will be used this way :
+ * out(dport, in(dport) & d_val[2] | d_val[signal_state])
+ * out(cport, in(cport) & c_val[2] | c_val[signal_state])
+ */
+static void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val)
+{
+ int d_bit, c_bit, inv;
+
+ d_val[0] = 0;
+ c_val[0] = 0;
+ d_val[1] = 0;
+ c_val[1] = 0;
+ d_val[2] = 0xFF;
+ c_val[2] = 0xFF;
+
+ if (pin == 0)
+ return;
+
+ inv = (pin < 0);
+ if (inv)
+ pin = -pin;
+
+ d_bit = 0;
+ c_bit = 0;
+
+ switch (pin) {
+ case PIN_STROBE: /* strobe, inverted */
+ c_bit = PNL_PSTROBE;
+ inv = !inv;
+ break;
+ case PIN_D0...PIN_D7: /* D0 - D7 = 2 - 9 */
+ d_bit = 1 << (pin - 2);
+ break;
+ case PIN_AUTOLF: /* autofeed, inverted */
+ c_bit = PNL_PAUTOLF;
+ inv = !inv;
+ break;
+ case PIN_INITP: /* init, direct */
+ c_bit = PNL_PINITP;
+ break;
+ case PIN_SELECP: /* select_in, inverted */
+ c_bit = PNL_PSELECP;
+ inv = !inv;
+ break;
+ default: /* unknown pin, ignore */
+ break;
+ }
+
+ if (c_bit) {
+ c_val[2] &= ~c_bit;
+ c_val[!inv] = c_bit;
+ } else if (d_bit) {
+ d_val[2] &= ~d_bit;
+ d_val[!inv] = d_bit;
+ }
+}
+
+/*
+ * send a serial byte to the LCD panel. The caller is responsible for locking
+ * if needed.
+ */
+static void lcd_send_serial(int byte)
+{
+ int bit;
+
+ /*
+ * the data bit is set on D0, and the clock on STROBE.
+ * LCD reads D0 on STROBE's rising edge.
+ */
+ for (bit = 0; bit < 8; bit++) {
+ clear_bit(LCD_BIT_CL, bits); /* CLK low */
+ panel_set_bits();
+ if (byte & 1) {
+ set_bit(LCD_BIT_DA, bits);
+ } else {
+ clear_bit(LCD_BIT_DA, bits);
+ }
+
+ panel_set_bits();
+ udelay(2); /* maintain the data during 2 us before CLK up */
+ set_bit(LCD_BIT_CL, bits); /* CLK high */
+ panel_set_bits();
+ udelay(1); /* maintain the strobe during 1 us */
+ byte >>= 1;
+ }
+}
+
+/* turn the backlight on or off */
+static void lcd_backlight(struct charlcd *charlcd, int on)
+{
+ if (lcd.pins.bl == PIN_NONE)
+ return;
+
+ /* The backlight is activated by setting the AUTOFEED line to +5V */
+ spin_lock_irq(&pprt_lock);
+ if (on)
+ set_bit(LCD_BIT_BL, bits);
+ else
+ clear_bit(LCD_BIT_BL, bits);
+ panel_set_bits();
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* send a command to the LCD panel in serial mode */
+static void lcd_write_cmd_s(struct charlcd *charlcd, int cmd)
+{
+ spin_lock_irq(&pprt_lock);
+ lcd_send_serial(0x1F); /* R/W=W, RS=0 */
+ lcd_send_serial(cmd & 0x0F);
+ lcd_send_serial((cmd >> 4) & 0x0F);
+ udelay(40); /* the shortest command takes at least 40 us */
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* send data to the LCD panel in serial mode */
+static void lcd_write_data_s(struct charlcd *charlcd, int data)
+{
+ spin_lock_irq(&pprt_lock);
+ lcd_send_serial(0x5F); /* R/W=W, RS=1 */
+ lcd_send_serial(data & 0x0F);
+ lcd_send_serial((data >> 4) & 0x0F);
+ udelay(40); /* the shortest data takes at least 40 us */
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* send a command to the LCD panel in 8 bits parallel mode */
+static void lcd_write_cmd_p8(struct charlcd *charlcd, int cmd)
+{
+ spin_lock_irq(&pprt_lock);
+ /* present the data to the data port */
+ w_dtr(pprt, cmd);
+ udelay(20); /* maintain the data during 20 us before the strobe */
+
+ set_bit(LCD_BIT_E, bits);
+ clear_bit(LCD_BIT_RS, bits);
+ clear_bit(LCD_BIT_RW, bits);
+ set_ctrl_bits();
+
+ udelay(40); /* maintain the strobe during 40 us */
+
+ clear_bit(LCD_BIT_E, bits);
+ set_ctrl_bits();
+
+ udelay(120); /* the shortest command takes at least 120 us */
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* send data to the LCD panel in 8 bits parallel mode */
+static void lcd_write_data_p8(struct charlcd *charlcd, int data)
+{
+ spin_lock_irq(&pprt_lock);
+ /* present the data to the data port */
+ w_dtr(pprt, data);
+ udelay(20); /* maintain the data during 20 us before the strobe */
+
+ set_bit(LCD_BIT_E, bits);
+ set_bit(LCD_BIT_RS, bits);
+ clear_bit(LCD_BIT_RW, bits);
+ set_ctrl_bits();
+
+ udelay(40); /* maintain the strobe during 40 us */
+
+ clear_bit(LCD_BIT_E, bits);
+ set_ctrl_bits();
+
+ udelay(45); /* the shortest data takes at least 45 us */
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* send a command to the TI LCD panel */
+static void lcd_write_cmd_tilcd(struct charlcd *charlcd, int cmd)
+{
+ spin_lock_irq(&pprt_lock);
+ /* present the data to the control port */
+ w_ctr(pprt, cmd);
+ udelay(60);
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* send data to the TI LCD panel */
+static void lcd_write_data_tilcd(struct charlcd *charlcd, int data)
+{
+ spin_lock_irq(&pprt_lock);
+ /* present the data to the data port */
+ w_dtr(pprt, data);
+ udelay(60);
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* fills the display with spaces and resets X/Y */
+static void lcd_clear_fast_s(struct charlcd *charlcd)
+{
+ int pos;
+
+ spin_lock_irq(&pprt_lock);
+ for (pos = 0; pos < charlcd->height * charlcd->hwidth; pos++) {
+ lcd_send_serial(0x5F); /* R/W=W, RS=1 */
+ lcd_send_serial(' ' & 0x0F);
+ lcd_send_serial((' ' >> 4) & 0x0F);
+ /* the shortest data takes at least 40 us */
+ udelay(40);
+ }
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* fills the display with spaces and resets X/Y */
+static void lcd_clear_fast_p8(struct charlcd *charlcd)
+{
+ int pos;
+
+ spin_lock_irq(&pprt_lock);
+ for (pos = 0; pos < charlcd->height * charlcd->hwidth; pos++) {
+ /* present the data to the data port */
+ w_dtr(pprt, ' ');
+
+ /* maintain the data during 20 us before the strobe */
+ udelay(20);
+
+ set_bit(LCD_BIT_E, bits);
+ set_bit(LCD_BIT_RS, bits);
+ clear_bit(LCD_BIT_RW, bits);
+ set_ctrl_bits();
+
+ /* maintain the strobe during 40 us */
+ udelay(40);
+
+ clear_bit(LCD_BIT_E, bits);
+ set_ctrl_bits();
+
+ /* the shortest data takes at least 45 us */
+ udelay(45);
+ }
+ spin_unlock_irq(&pprt_lock);
+}
+
+/* fills the display with spaces and resets X/Y */
+static void lcd_clear_fast_tilcd(struct charlcd *charlcd)
+{
+ int pos;
+
+ spin_lock_irq(&pprt_lock);
+ for (pos = 0; pos < charlcd->height * charlcd->hwidth; pos++) {
+ /* present the data to the data port */
+ w_dtr(pprt, ' ');
+ udelay(60);
+ }
+
+ spin_unlock_irq(&pprt_lock);
+}
+
+static struct charlcd_ops charlcd_serial_ops = {
+ .write_cmd = lcd_write_cmd_s,
+ .write_data = lcd_write_data_s,
+ .clear_fast = lcd_clear_fast_s,
+ .backlight = lcd_backlight,
+};
+
+static struct charlcd_ops charlcd_parallel_ops = {
+ .write_cmd = lcd_write_cmd_p8,
+ .write_data = lcd_write_data_p8,
+ .clear_fast = lcd_clear_fast_p8,
+ .backlight = lcd_backlight,
+};
+
+static struct charlcd_ops charlcd_tilcd_ops = {
+ .write_cmd = lcd_write_cmd_tilcd,
+ .write_data = lcd_write_data_tilcd,
+ .clear_fast = lcd_clear_fast_tilcd,
+ .backlight = lcd_backlight,
+};
+
+/* initialize the LCD driver */
+static void lcd_init(void)
+{
+ struct charlcd *charlcd;
+
+ charlcd = charlcd_alloc(0);
+ if (!charlcd)
+ return;
+
+ /*
+ * Init lcd struct with load-time values to preserve exact
+ * current functionality (at least for now).
+ */
+ charlcd->height = lcd_height;
+ charlcd->width = lcd_width;
+ charlcd->bwidth = lcd_bwidth;
+ charlcd->hwidth = lcd_hwidth;
+
+ switch (selected_lcd_type) {
+ case LCD_TYPE_OLD:
+ /* parallel mode, 8 bits */
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_STROBE;
+ lcd.pins.rs = PIN_AUTOLF;
+
+ charlcd->width = 40;
+ charlcd->bwidth = 40;
+ charlcd->hwidth = 64;
+ charlcd->height = 2;
+ break;
+ case LCD_TYPE_KS0074:
+ /* serial mode, ks0074 */
+ lcd.proto = LCD_PROTO_SERIAL;
+ lcd.charset = LCD_CHARSET_KS0074;
+ lcd.pins.bl = PIN_AUTOLF;
+ lcd.pins.cl = PIN_STROBE;
+ lcd.pins.da = PIN_D0;
+
+ charlcd->width = 16;
+ charlcd->bwidth = 40;
+ charlcd->hwidth = 16;
+ charlcd->height = 2;
+ break;
+ case LCD_TYPE_NEXCOM:
+ /* parallel mode, 8 bits, generic */
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_AUTOLF;
+ lcd.pins.rs = PIN_SELECP;
+ lcd.pins.rw = PIN_INITP;
+
+ charlcd->width = 16;
+ charlcd->bwidth = 40;
+ charlcd->hwidth = 64;
+ charlcd->height = 2;
+ break;
+ case LCD_TYPE_CUSTOM:
+ /* customer-defined */
+ lcd.proto = DEFAULT_LCD_PROTO;
+ lcd.charset = DEFAULT_LCD_CHARSET;
+ /* default geometry will be set later */
+ break;
+ case LCD_TYPE_HANTRONIX:
+ /* parallel mode, 8 bits, hantronix-like */
+ default:
+ lcd.proto = LCD_PROTO_PARALLEL;
+ lcd.charset = LCD_CHARSET_NORMAL;
+ lcd.pins.e = PIN_STROBE;
+ lcd.pins.rs = PIN_SELECP;
+
+ charlcd->width = 16;
+ charlcd->bwidth = 40;
+ charlcd->hwidth = 64;
+ charlcd->height = 2;
+ break;
+ }
+
+ /* Overwrite with module params set on loading */
+ if (lcd_height != NOT_SET)
+ charlcd->height = lcd_height;
+ if (lcd_width != NOT_SET)
+ charlcd->width = lcd_width;
+ if (lcd_bwidth != NOT_SET)
+ charlcd->bwidth = lcd_bwidth;
+ if (lcd_hwidth != NOT_SET)
+ charlcd->hwidth = lcd_hwidth;
+ if (lcd_charset != NOT_SET)
+ lcd.charset = lcd_charset;
+ if (lcd_proto != NOT_SET)
+ lcd.proto = lcd_proto;
+ if (lcd_e_pin != PIN_NOT_SET)
+ lcd.pins.e = lcd_e_pin;
+ if (lcd_rs_pin != PIN_NOT_SET)
+ lcd.pins.rs = lcd_rs_pin;
+ if (lcd_rw_pin != PIN_NOT_SET)
+ lcd.pins.rw = lcd_rw_pin;
+ if (lcd_cl_pin != PIN_NOT_SET)
+ lcd.pins.cl = lcd_cl_pin;
+ if (lcd_da_pin != PIN_NOT_SET)
+ lcd.pins.da = lcd_da_pin;
+ if (lcd_bl_pin != PIN_NOT_SET)
+ lcd.pins.bl = lcd_bl_pin;
+
+ /* this is used to catch wrong and default values */
+ if (charlcd->width <= 0)
+ charlcd->width = DEFAULT_LCD_WIDTH;
+ if (charlcd->bwidth <= 0)
+ charlcd->bwidth = DEFAULT_LCD_BWIDTH;
+ if (charlcd->hwidth <= 0)
+ charlcd->hwidth = DEFAULT_LCD_HWIDTH;
+ if (charlcd->height <= 0)
+ charlcd->height = DEFAULT_LCD_HEIGHT;
+
+ if (lcd.proto == LCD_PROTO_SERIAL) { /* SERIAL */
+ charlcd->ops = &charlcd_serial_ops;
+
+ if (lcd.pins.cl == PIN_NOT_SET)
+ lcd.pins.cl = DEFAULT_LCD_PIN_SCL;
+ if (lcd.pins.da == PIN_NOT_SET)
+ lcd.pins.da = DEFAULT_LCD_PIN_SDA;
+
+ } else if (lcd.proto == LCD_PROTO_PARALLEL) { /* PARALLEL */
+ charlcd->ops = &charlcd_parallel_ops;
+
+ if (lcd.pins.e == PIN_NOT_SET)
+ lcd.pins.e = DEFAULT_LCD_PIN_E;
+ if (lcd.pins.rs == PIN_NOT_SET)
+ lcd.pins.rs = DEFAULT_LCD_PIN_RS;
+ if (lcd.pins.rw == PIN_NOT_SET)
+ lcd.pins.rw = DEFAULT_LCD_PIN_RW;
+ } else {
+ charlcd->ops = &charlcd_tilcd_ops;
+ }
+
+ if (lcd.pins.bl == PIN_NOT_SET)
+ lcd.pins.bl = DEFAULT_LCD_PIN_BL;
+
+ if (lcd.pins.e == PIN_NOT_SET)
+ lcd.pins.e = PIN_NONE;
+ if (lcd.pins.rs == PIN_NOT_SET)
+ lcd.pins.rs = PIN_NONE;
+ if (lcd.pins.rw == PIN_NOT_SET)
+ lcd.pins.rw = PIN_NONE;
+ if (lcd.pins.bl == PIN_NOT_SET)
+ lcd.pins.bl = PIN_NONE;
+ if (lcd.pins.cl == PIN_NOT_SET)
+ lcd.pins.cl = PIN_NONE;
+ if (lcd.pins.da == PIN_NOT_SET)
+ lcd.pins.da = PIN_NONE;
+
+ if (lcd.charset == NOT_SET)
+ lcd.charset = DEFAULT_LCD_CHARSET;
+
+ if (lcd.charset == LCD_CHARSET_KS0074)
+ charlcd->char_conv = lcd_char_conv_ks0074;
+ else
+ charlcd->char_conv = NULL;
+
+ pin_to_bits(lcd.pins.e, lcd_bits[LCD_PORT_D][LCD_BIT_E],
+ lcd_bits[LCD_PORT_C][LCD_BIT_E]);
+ pin_to_bits(lcd.pins.rs, lcd_bits[LCD_PORT_D][LCD_BIT_RS],
+ lcd_bits[LCD_PORT_C][LCD_BIT_RS]);
+ pin_to_bits(lcd.pins.rw, lcd_bits[LCD_PORT_D][LCD_BIT_RW],
+ lcd_bits[LCD_PORT_C][LCD_BIT_RW]);
+ pin_to_bits(lcd.pins.bl, lcd_bits[LCD_PORT_D][LCD_BIT_BL],
+ lcd_bits[LCD_PORT_C][LCD_BIT_BL]);
+ pin_to_bits(lcd.pins.cl, lcd_bits[LCD_PORT_D][LCD_BIT_CL],
+ lcd_bits[LCD_PORT_C][LCD_BIT_CL]);
+ pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
+ lcd_bits[LCD_PORT_C][LCD_BIT_DA]);
+
+ lcd.charlcd = charlcd;
+ lcd.initialized = true;
+}
+
+/*
+ * These are the file operation function for user access to /dev/keypad
+ */
+
+static ssize_t keypad_read(struct file *file,
+ char __user *buf, size_t count, loff_t *ppos)
+{
+ unsigned i = *ppos;
+ char __user *tmp = buf;
+
+ if (keypad_buflen == 0) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ if (wait_event_interruptible(keypad_read_wait,
+ keypad_buflen != 0))
+ return -EINTR;
+ }
+
+ for (; count-- > 0 && (keypad_buflen > 0);
+ ++i, ++tmp, --keypad_buflen) {
+ put_user(keypad_buffer[keypad_start], tmp);
+ keypad_start = (keypad_start + 1) % KEYPAD_BUFFER;
+ }
+ *ppos = i;
+
+ return tmp - buf;
+}
+
+static int keypad_open(struct inode *inode, struct file *file)
+{
+ if (!atomic_dec_and_test(&keypad_available))
+ return -EBUSY; /* open only once at a time */
+
+ if (file->f_mode & FMODE_WRITE) /* device is read-only */
+ return -EPERM;
+
+ keypad_buflen = 0; /* flush the buffer on opening */
+ return 0;
+}
+
+static int keypad_release(struct inode *inode, struct file *file)
+{
+ atomic_inc(&keypad_available);
+ return 0;
+}
+
+static const struct file_operations keypad_fops = {
+ .read = keypad_read, /* read */
+ .open = keypad_open, /* open */
+ .release = keypad_release, /* close */
+ .llseek = default_llseek,
+};
+
+static struct miscdevice keypad_dev = {
+ .minor = KEYPAD_MINOR,
+ .name = "keypad",
+ .fops = &keypad_fops,
+};
+
+static void keypad_send_key(const char *string, int max_len)
+{
+ /* send the key to the device only if a process is attached to it. */
+ if (!atomic_read(&keypad_available)) {
+ while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) {
+ keypad_buffer[(keypad_start + keypad_buflen++) %
+ KEYPAD_BUFFER] = *string++;
+ }
+ wake_up_interruptible(&keypad_read_wait);
+ }
+}
+
+/* this function scans all the bits involving at least one logical signal,
+ * and puts the results in the bitfield "phys_read" (one bit per established
+ * contact), and sets "phys_read_prev" to "phys_read".
+ *
+ * Note: to debounce input signals, we will only consider as switched a signal
+ * which is stable across 2 measures. Signals which are different between two
+ * reads will be kept as they previously were in their logical form (phys_prev).
+ * A signal which has just switched will have a 1 in
+ * (phys_read ^ phys_read_prev).
+ */
+static void phys_scan_contacts(void)
+{
+ int bit, bitval;
+ char oldval;
+ char bitmask;
+ char gndmask;
+
+ phys_prev = phys_curr;
+ phys_read_prev = phys_read;
+ phys_read = 0; /* flush all signals */
+
+ /* keep track of old value, with all outputs disabled */
+ oldval = r_dtr(pprt) | scan_mask_o;
+ /* activate all keyboard outputs (active low) */
+ w_dtr(pprt, oldval & ~scan_mask_o);
+
+ /* will have a 1 for each bit set to gnd */
+ bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;
+ /* disable all matrix signals */
+ w_dtr(pprt, oldval);
+
+ /* now that all outputs are cleared, the only active input bits are
+ * directly connected to the ground
+ */
+
+ /* 1 for each grounded input */
+ gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;
+
+ /* grounded inputs are signals 40-44 */
+ phys_read |= (__u64)gndmask << 40;
+
+ if (bitmask != gndmask) {
+ /*
+ * since clearing the outputs changed some inputs, we know
+ * that some input signals are currently tied to some outputs.
+ * So we'll scan them.
+ */
+ for (bit = 0; bit < 8; bit++) {
+ bitval = BIT(bit);
+
+ if (!(scan_mask_o & bitval)) /* skip unused bits */
+ continue;
+
+ w_dtr(pprt, oldval & ~bitval); /* enable this output */
+ bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask;
+ phys_read |= (__u64)bitmask << (5 * bit);
+ }
+ w_dtr(pprt, oldval); /* disable all outputs */
+ }
+ /*
+ * this is easy: use old bits when they are flapping,
+ * use new ones when stable
+ */
+ phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) |
+ (phys_read & ~(phys_read ^ phys_read_prev));
+}
+
+static inline int input_state_high(struct logical_input *input)
+{
+#if 0
+ /* FIXME:
+ * this is an invalid test. It tries to catch
+ * transitions from single-key to multiple-key, but
+ * doesn't take into account the contacts polarity.
+ * The only solution to the problem is to parse keys
+ * from the most complex to the simplest combinations,
+ * and mark them as 'caught' once a combination
+ * matches, then unmatch it for all other ones.
+ */
+
+ /* try to catch dangerous transitions cases :
+ * someone adds a bit, so this signal was a false
+ * positive resulting from a transition. We should
+ * invalidate the signal immediately and not call the
+ * release function.
+ * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release.
+ */
+ if (((phys_prev & input->mask) == input->value) &&
+ ((phys_curr & input->mask) > input->value)) {
+ input->state = INPUT_ST_LOW; /* invalidate */
+ return 1;
+ }
+#endif
+
+ if ((phys_curr & input->mask) == input->value) {
+ if ((input->type == INPUT_TYPE_STD) &&
+ (input->high_timer == 0)) {
+ input->high_timer++;
+ if (input->u.std.press_fct)
+ input->u.std.press_fct(input->u.std.press_data);
+ } else if (input->type == INPUT_TYPE_KBD) {
+ /* will turn on the light */
+ keypressed = 1;
+
+ if (input->high_timer == 0) {
+ char *press_str = input->u.kbd.press_str;
+
+ if (press_str[0]) {
+ int s = sizeof(input->u.kbd.press_str);
+
+ keypad_send_key(press_str, s);
+ }
+ }
+
+ if (input->u.kbd.repeat_str[0]) {
+ char *repeat_str = input->u.kbd.repeat_str;
+
+ if (input->high_timer >= KEYPAD_REP_START) {
+ int s = sizeof(input->u.kbd.repeat_str);
+
+ input->high_timer -= KEYPAD_REP_DELAY;
+ keypad_send_key(repeat_str, s);
+ }
+ /* we will need to come back here soon */
+ inputs_stable = 0;
+ }
+
+ if (input->high_timer < 255)
+ input->high_timer++;
+ }
+ return 1;
+ }
+
+ /* else signal falling down. Let's fall through. */
+ input->state = INPUT_ST_FALLING;
+ input->fall_timer = 0;
+
+ return 0;
+}
+
+static inline void input_state_falling(struct logical_input *input)
+{
+#if 0
+ /* FIXME !!! same comment as in input_state_high */
+ if (((phys_prev & input->mask) == input->value) &&
+ ((phys_curr & input->mask) > input->value)) {
+ input->state = INPUT_ST_LOW; /* invalidate */
+ return;
+ }
+#endif
+
+ if ((phys_curr & input->mask) == input->value) {
+ if (input->type == INPUT_TYPE_KBD) {
+ /* will turn on the light */
+ keypressed = 1;
+
+ if (input->u.kbd.repeat_str[0]) {
+ char *repeat_str = input->u.kbd.repeat_str;
+
+ if (input->high_timer >= KEYPAD_REP_START) {
+ int s = sizeof(input->u.kbd.repeat_str);
+
+ input->high_timer -= KEYPAD_REP_DELAY;
+ keypad_send_key(repeat_str, s);
+ }
+ /* we will need to come back here soon */
+ inputs_stable = 0;
+ }
+
+ if (input->high_timer < 255)
+ input->high_timer++;
+ }
+ input->state = INPUT_ST_HIGH;
+ } else if (input->fall_timer >= input->fall_time) {
+ /* call release event */
+ if (input->type == INPUT_TYPE_STD) {
+ void (*release_fct)(int) = input->u.std.release_fct;
+
+ if (release_fct)
+ release_fct(input->u.std.release_data);
+ } else if (input->type == INPUT_TYPE_KBD) {
+ char *release_str = input->u.kbd.release_str;
+
+ if (release_str[0]) {
+ int s = sizeof(input->u.kbd.release_str);
+
+ keypad_send_key(release_str, s);
+ }
+ }
+
+ input->state = INPUT_ST_LOW;
+ } else {
+ input->fall_timer++;
+ inputs_stable = 0;
+ }
+}
+
+static void panel_process_inputs(void)
+{
+ struct list_head *item;
+ struct logical_input *input;
+
+ keypressed = 0;
+ inputs_stable = 1;
+ list_for_each(item, &logical_inputs) {
+ input = list_entry(item, struct logical_input, list);
+
+ switch (input->state) {
+ case INPUT_ST_LOW:
+ if ((phys_curr & input->mask) != input->value)
+ break;
+ /* if all needed ones were already set previously,
+ * this means that this logical signal has been
+ * activated by the releasing of another combined
+ * signal, so we don't want to match.
+ * eg: AB -(release B)-> A -(release A)-> 0 :
+ * don't match A.
+ */
+ if ((phys_prev & input->mask) == input->value)
+ break;
+ input->rise_timer = 0;
+ input->state = INPUT_ST_RISING;
+ /* no break here, fall through */
+ case INPUT_ST_RISING:
+ if ((phys_curr & input->mask) != input->value) {
+ input->state = INPUT_ST_LOW;
+ break;
+ }
+ if (input->rise_timer < input->rise_time) {
+ inputs_stable = 0;
+ input->rise_timer++;
+ break;
+ }
+ input->high_timer = 0;
+ input->state = INPUT_ST_HIGH;
+ /* no break here, fall through */
+ case INPUT_ST_HIGH:
+ if (input_state_high(input))
+ break;
+ /* no break here, fall through */
+ case INPUT_ST_FALLING:
+ input_state_falling(input);
+ }
+ }
+}
+
+static void panel_scan_timer(void)
+{
+ if (keypad.enabled && keypad_initialized) {
+ if (spin_trylock_irq(&pprt_lock)) {
+ phys_scan_contacts();
+
+ /* no need for the parport anymore */
+ spin_unlock_irq(&pprt_lock);
+ }
+
+ if (!inputs_stable || phys_curr != phys_prev)
+ panel_process_inputs();
+ }
+
+ if (keypressed && lcd.enabled && lcd.initialized)
+ charlcd_poke(lcd.charlcd);
+
+ mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME);
+}
+
+static void init_scan_timer(void)
+{
+ if (scan_timer.function)
+ return; /* already started */
+
+ setup_timer(&scan_timer, (void *)&panel_scan_timer, 0);
+ scan_timer.expires = jiffies + INPUT_POLL_TIME;
+ add_timer(&scan_timer);
+}
+
+/* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits.
+ * if <omask> or <imask> are non-null, they will be or'ed with the bits
+ * corresponding to out and in bits respectively.
+ * returns 1 if ok, 0 if error (in which case, nothing is written).
+ */
+static u8 input_name2mask(const char *name, __u64 *mask, __u64 *value,
+ u8 *imask, u8 *omask)
+{
+ const char sigtab[] = "EeSsPpAaBb";
+ u8 im, om;
+ __u64 m, v;
+
+ om = 0;
+ im = 0;
+ m = 0ULL;
+ v = 0ULL;
+ while (*name) {
+ int in, out, bit, neg;
+ const char *idx;
+
+ idx = strchr(sigtab, *name);
+ if (!idx)
+ return 0; /* input name not found */
+
+ in = idx - sigtab;
+ neg = (in & 1); /* odd (lower) names are negated */
+ in >>= 1;
+ im |= BIT(in);
+
+ name++;
+ if (*name >= '0' && *name <= '7') {
+ out = *name - '0';
+ om |= BIT(out);
+ } else if (*name == '-') {
+ out = 8;
+ } else {
+ return 0; /* unknown bit name */
+ }
+
+ bit = (out * 5) + in;
+
+ m |= 1ULL << bit;
+ if (!neg)
+ v |= 1ULL << bit;
+ name++;
+ }
+ *mask = m;
+ *value = v;
+ if (imask)
+ *imask |= im;
+ if (omask)
+ *omask |= om;
+ return 1;
+}
+
+/* tries to bind a key to the signal name <name>. The key will send the
+ * strings <press>, <repeat>, <release> for these respective events.
+ * Returns the pointer to the new key if ok, NULL if the key could not be bound.
+ */
+static struct logical_input *panel_bind_key(const char *name, const char *press,
+ const char *repeat,
+ const char *release)
+{
+ struct logical_input *key;
+
+ key = kzalloc(sizeof(*key), GFP_KERNEL);
+ if (!key)
+ return NULL;
+
+ if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i,
+ &scan_mask_o)) {
+ kfree(key);
+ return NULL;
+ }
+
+ key->type = INPUT_TYPE_KBD;
+ key->state = INPUT_ST_LOW;
+ key->rise_time = 1;
+ key->fall_time = 1;
+
+ strncpy(key->u.kbd.press_str, press, sizeof(key->u.kbd.press_str));
+ strncpy(key->u.kbd.repeat_str, repeat, sizeof(key->u.kbd.repeat_str));
+ strncpy(key->u.kbd.release_str, release,
+ sizeof(key->u.kbd.release_str));
+ list_add(&key->list, &logical_inputs);
+ return key;
+}
+
+#if 0
+/* tries to bind a callback function to the signal name <name>. The function
+ * <press_fct> will be called with the <press_data> arg when the signal is
+ * activated, and so on for <release_fct>/<release_data>
+ * Returns the pointer to the new signal if ok, NULL if the signal could not
+ * be bound.
+ */
+static struct logical_input *panel_bind_callback(char *name,
+ void (*press_fct)(int),
+ int press_data,
+ void (*release_fct)(int),
+ int release_data)
+{
+ struct logical_input *callback;
+
+ callback = kmalloc(sizeof(*callback), GFP_KERNEL);
+ if (!callback)
+ return NULL;
+
+ memset(callback, 0, sizeof(struct logical_input));
+ if (!input_name2mask(name, &callback->mask, &callback->value,
+ &scan_mask_i, &scan_mask_o))
+ return NULL;
+
+ callback->type = INPUT_TYPE_STD;
+ callback->state = INPUT_ST_LOW;
+ callback->rise_time = 1;
+ callback->fall_time = 1;
+ callback->u.std.press_fct = press_fct;
+ callback->u.std.press_data = press_data;
+ callback->u.std.release_fct = release_fct;
+ callback->u.std.release_data = release_data;
+ list_add(&callback->list, &logical_inputs);
+ return callback;
+}
+#endif
+
+static void keypad_init(void)
+{
+ int keynum;
+
+ init_waitqueue_head(&keypad_read_wait);
+ keypad_buflen = 0; /* flushes any eventual noisy keystroke */
+
+ /* Let's create all known keys */
+
+ for (keynum = 0; keypad_profile[keynum][0][0]; keynum++) {
+ panel_bind_key(keypad_profile[keynum][0],
+ keypad_profile[keynum][1],
+ keypad_profile[keynum][2],
+ keypad_profile[keynum][3]);
+ }
+
+ init_scan_timer();
+ keypad_initialized = 1;
+}
+
+/**************************************************/
+/* device initialization */
+/**************************************************/
+
+static void panel_attach(struct parport *port)
+{
+ struct pardev_cb panel_cb;
+
+ if (port->number != parport)
+ return;
+
+ if (pprt) {
+ pr_err("%s: port->number=%d parport=%d, already registered!\n",
+ __func__, port->number, parport);
+ return;
+ }
+
+ memset(&panel_cb, 0, sizeof(panel_cb));
+ panel_cb.private = &pprt;
+ /* panel_cb.flags = 0 should be PARPORT_DEV_EXCL? */
+
+ pprt = parport_register_dev_model(port, "panel", &panel_cb, 0);
+ if (!pprt) {
+ pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n",
+ __func__, port->number, parport);
+ return;
+ }
+
+ if (parport_claim(pprt)) {
+ pr_err("could not claim access to parport%d. Aborting.\n",
+ parport);
+ goto err_unreg_device;
+ }
+
+ /* must init LCD first, just in case an IRQ from the keypad is
+ * generated at keypad init
+ */
+ if (lcd.enabled) {
+ lcd_init();
+ if (!lcd.charlcd || charlcd_register(lcd.charlcd))
+ goto err_unreg_device;
+ }
+
+ if (keypad.enabled) {
+ keypad_init();
+ if (misc_register(&keypad_dev))
+ goto err_lcd_unreg;
+ }
+ return;
+
+err_lcd_unreg:
+ if (lcd.enabled)
+ charlcd_unregister(lcd.charlcd);
+err_unreg_device:
+ kfree(lcd.charlcd);
+ lcd.charlcd = NULL;
+ parport_unregister_device(pprt);
+ pprt = NULL;
+}
+
+static void panel_detach(struct parport *port)
+{
+ if (port->number != parport)
+ return;
+
+ if (!pprt) {
+ pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n",
+ __func__, port->number, parport);
+ return;
+ }
+ if (scan_timer.function)
+ del_timer_sync(&scan_timer);
+
+ if (keypad.enabled) {
+ misc_deregister(&keypad_dev);
+ keypad_initialized = 0;
+ }
+
+ if (lcd.enabled) {
+ charlcd_unregister(lcd.charlcd);
+ lcd.initialized = false;
+ kfree(lcd.charlcd);
+ lcd.charlcd = NULL;
+ }
+
+ /* TODO: free all input signals */
+ parport_release(pprt);
+ parport_unregister_device(pprt);
+ pprt = NULL;
+}
+
+static struct parport_driver panel_driver = {
+ .name = "panel",
+ .match_port = panel_attach,
+ .detach = panel_detach,
+ .devmodel = true,
+};
+
+/* init function */
+static int __init panel_init_module(void)
+{
+ int selected_keypad_type = NOT_SET, err;
+
+ /* take care of an eventual profile */
+ switch (profile) {
+ case PANEL_PROFILE_CUSTOM:
+ /* custom profile */
+ selected_keypad_type = DEFAULT_KEYPAD_TYPE;
+ selected_lcd_type = DEFAULT_LCD_TYPE;
+ break;
+ case PANEL_PROFILE_OLD:
+ /* 8 bits, 2*16, old keypad */
+ selected_keypad_type = KEYPAD_TYPE_OLD;
+ selected_lcd_type = LCD_TYPE_OLD;
+
+ /* TODO: This two are a little hacky, sort it out later */
+ if (lcd_width == NOT_SET)
+ lcd_width = 16;
+ if (lcd_hwidth == NOT_SET)
+ lcd_hwidth = 16;
+ break;
+ case PANEL_PROFILE_NEW:
+ /* serial, 2*16, new keypad */
+ selected_keypad_type = KEYPAD_TYPE_NEW;
+ selected_lcd_type = LCD_TYPE_KS0074;
+ break;
+ case PANEL_PROFILE_HANTRONIX:
+ /* 8 bits, 2*16 hantronix-like, no keypad */
+ selected_keypad_type = KEYPAD_TYPE_NONE;
+ selected_lcd_type = LCD_TYPE_HANTRONIX;
+ break;
+ case PANEL_PROFILE_NEXCOM:
+ /* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
+ selected_keypad_type = KEYPAD_TYPE_NEXCOM;
+ selected_lcd_type = LCD_TYPE_NEXCOM;
+ break;
+ case PANEL_PROFILE_LARGE:
+ /* 8 bits, 2*40, old keypad */
+ selected_keypad_type = KEYPAD_TYPE_OLD;
+ selected_lcd_type = LCD_TYPE_OLD;
+ break;
+ }
+
+ /*
+ * Overwrite selection with module param values (both keypad and lcd),
+ * where the deprecated params have lower prio.
+ */
+ if (keypad_enabled != NOT_SET)
+ selected_keypad_type = keypad_enabled;
+ if (keypad_type != NOT_SET)
+ selected_keypad_type = keypad_type;
+
+ keypad.enabled = (selected_keypad_type > 0);
+
+ if (lcd_enabled != NOT_SET)
+ selected_lcd_type = lcd_enabled;
+ if (lcd_type != NOT_SET)
+ selected_lcd_type = lcd_type;
+
+ lcd.enabled = (selected_lcd_type > 0);
+
+ if (lcd.enabled) {
+ /*
+ * Init lcd struct with load-time values to preserve exact
+ * current functionality (at least for now).
+ */
+ lcd.charset = lcd_charset;
+ lcd.proto = lcd_proto;
+ lcd.pins.e = lcd_e_pin;
+ lcd.pins.rs = lcd_rs_pin;
+ lcd.pins.rw = lcd_rw_pin;
+ lcd.pins.cl = lcd_cl_pin;
+ lcd.pins.da = lcd_da_pin;
+ lcd.pins.bl = lcd_bl_pin;
+ }
+
+ switch (selected_keypad_type) {
+ case KEYPAD_TYPE_OLD:
+ keypad_profile = old_keypad_profile;
+ break;
+ case KEYPAD_TYPE_NEW:
+ keypad_profile = new_keypad_profile;
+ break;
+ case KEYPAD_TYPE_NEXCOM:
+ keypad_profile = nexcom_keypad_profile;
+ break;
+ default:
+ keypad_profile = NULL;
+ break;
+ }
+
+ if (!lcd.enabled && !keypad.enabled) {
+ /* no device enabled, let's exit */
+ pr_err("panel driver disabled.\n");
+ return -ENODEV;
+ }
+
+ err = parport_register_driver(&panel_driver);
+ if (err) {
+ pr_err("could not register with parport. Aborting.\n");
+ return err;
+ }
+
+ if (pprt)
+ pr_info("panel driver registered on parport%d (io=0x%lx).\n",
+ parport, pprt->port->base);
+ else
+ pr_info("panel driver not yet registered\n");
+ return 0;
+}
+
+static void __exit panel_cleanup_module(void)
+{
+ parport_unregister_driver(&panel_driver);
+}
+
+module_init(panel_init_module);
+module_exit(panel_cleanup_module);
+MODULE_AUTHOR("Willy Tarreau");
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * tab-width: 8
+ * End:
+ */