ipmi_si: Join string literals back

For easy grepping on debug purposes join string literals back in
the messages.

No functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210402174334.13466-11-andriy.shevchenko@linux.intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

1 files changed, 16 insertions, 34 deletions

diff --git a/drivers/char/ipmi/ipmi_si_hardcode.c b/drivers/char/ipmi/ipmi_si_hardcode.c
index bbcf7483d569..ed5e91b1e040 100644
--- a/drivers/char/ipmi/ipmi_si_hardcode.c
+++ b/drivers/char/ipmi/ipmi_si_hardcode.c
@@ -32,47 +32,29 @@ static int slave_addrs[SI_MAX_PARMS] __initdata;
 static unsigned int num_slave_addrs __initdata;
 
 module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
-MODULE_PARM_DESC(type, "Defines the type of each interface, each"
-		 " interface separated by commas.  The types are 'kcs',"
-		 " 'smic', and 'bt'.  For example si_type=kcs,bt will set"
-		 " the first interface to kcs and the second to bt");
+MODULE_PARM_DESC(type,
+		 "Defines the type of each interface, each interface separated by commas.  The types are 'kcs', 'smic', and 'bt'.  For example si_type=kcs,bt will set the first interface to kcs and the second to bt");
 module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0);
-MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
-		 " addresses separated by commas.  Only use if an interface"
-		 " is in memory.  Otherwise, set it to zero or leave"
-		 " it blank.");
+MODULE_PARM_DESC(addrs,
+		 "Sets the memory address of each interface, the addresses separated by commas.  Only use if an interface is in memory.  Otherwise, set it to zero or leave it blank.");
 module_param_hw_array(ports, uint, ioport, &num_ports, 0);
-MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
-		 " addresses separated by commas.  Only use if an interface"
-		 " is a port.  Otherwise, set it to zero or leave"
-		 " it blank.");
+MODULE_PARM_DESC(ports,
+		 "Sets the port address of each interface, the addresses separated by commas.  Only use if an interface is a port.  Otherwise, set it to zero or leave it blank.");
 module_param_hw_array(irqs, int, irq, &num_irqs, 0);
-MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
-		 " addresses separated by commas.  Only use if an interface"
-		 " has an interrupt.  Otherwise, set it to zero or leave"
-		 " it blank.");
+MODULE_PARM_DESC(irqs,
+		 "Sets the interrupt of each interface, the addresses separated by commas.  Only use if an interface has an interrupt.  Otherwise, set it to zero or leave it blank.");
 module_param_hw_array(regspacings, int, other, &num_regspacings, 0);
-MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
-		 " and each successive register used by the interface.  For"
-		 " instance, if the start address is 0xca2 and the spacing"
-		 " is 2, then the second address is at 0xca4.  Defaults"
-		 " to 1.");
+MODULE_PARM_DESC(regspacings,
+		 "The number of bytes between the start address and each successive register used by the interface.  For instance, if the start address is 0xca2 and the spacing is 2, then the second address is at 0xca4.  Defaults to 1.");
 module_param_hw_array(regsizes, int, other, &num_regsizes, 0);
-MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
-		 " This should generally be 1, 2, 4, or 8 for an 8-bit,"
-		 " 16-bit, 32-bit, or 64-bit register.  Use this if you"
-		 " the 8-bit IPMI register has to be read from a larger"
-		 " register.");
+MODULE_PARM_DESC(regsizes,
+		 "The size of the specific IPMI register in bytes. This should generally be 1, 2, 4, or 8 for an 8-bit, 16-bit, 32-bit, or 64-bit register.  Use this if you the 8-bit IPMI register has to be read from a larger register.");
 module_param_hw_array(regshifts, int, other, &num_regshifts, 0);
-MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
-		 " IPMI register, in bits.  For instance, if the data"
-		 " is read from a 32-bit word and the IPMI data is in"
-		 " bit 8-15, then the shift would be 8");
+MODULE_PARM_DESC(regshifts,
+		 "The amount to shift the data read from the. IPMI register, in bits.  For instance, if the data is read from a 32-bit word and the IPMI data is in bit 8-15, then the shift would be 8");
 module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0);
-MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
-		 " the controller.  Normally this is 0x20, but can be"
-		 " overridden by this parm.  This is an array indexed"
-		 " by interface number.");
+MODULE_PARM_DESC(slave_addrs,
+		 "Set the default IPMB slave address for the controller.  Normally this is 0x20, but can be overridden by this parm.  This is an array indexed by interface number.");
 
 static void __init ipmi_hardcode_init_one(const char *si_type_str,
 					  unsigned int i,