ipmi_si: Move hardcode handling to a separate file.

Signed-off-by: Corey Minyard <cminyard@mvista.com>

1 files changed, 6 insertions, 146 deletions

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 02e263b2152a..58f0ebbcd342 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -291,9 +291,8 @@ struct smi_info {
 #define smi_get_stat(smi, stat) \
 	((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
 
-#define SI_MAX_PARMS 4
-
-static int force_kipmid[SI_MAX_PARMS];
+#define IPMI_MAX_INTFS 4
+static int force_kipmid[IPMI_MAX_INTFS];
 static int num_force_kipmid;
 #ifdef CONFIG_PCI
 static bool pci_registered;
@@ -302,7 +301,7 @@ static bool pci_registered;
 static bool parisc_registered;
 #endif
 
-static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
+static unsigned int kipmid_max_busy_us[IPMI_MAX_INTFS];
 static int num_max_busy_us;
 
 static bool unload_when_empty = true;
@@ -1271,11 +1270,6 @@ static const struct ipmi_smi_handlers handlers = {
 	.poll			= poll,
 };
 
-/*
- * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
- * a default IO port, and 1 ACPI/SPMI address.  That sets SI_MAX_DRIVERS.
- */
-
 static LIST_HEAD(smi_infos);
 static DEFINE_MUTEX(smi_infos_lock);
 static int smi_num; /* Used to sequence the SMIs */
@@ -1290,23 +1284,6 @@ static bool          si_tryplatform = true;
 #ifdef CONFIG_PCI
 static bool          si_trypci = true;
 #endif
-static char          *si_type[SI_MAX_PARMS];
-#define MAX_SI_TYPE_STR 30
-static char          si_type_str[MAX_SI_TYPE_STR];
-static unsigned long addrs[SI_MAX_PARMS];
-static unsigned int num_addrs;
-static unsigned int  ports[SI_MAX_PARMS];
-static unsigned int num_ports;
-static int           irqs[SI_MAX_PARMS];
-static unsigned int num_irqs;
-static int           regspacings[SI_MAX_PARMS];
-static unsigned int num_regspacings;
-static int           regsizes[SI_MAX_PARMS];
-static unsigned int num_regsizes;
-static int           regshifts[SI_MAX_PARMS];
-static unsigned int num_regshifts;
-static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
-static unsigned int num_slave_addrs;
 
 static const char * const addr_space_to_str[] = { "i/o", "mem" };
 
@@ -1329,48 +1306,6 @@ module_param_named(trypci, si_trypci, bool, 0);
 MODULE_PARM_DESC(trypci, "Setting this to zero will disable the"
 		 " default scan of the interfaces identified via pci");
 #endif
-module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
-MODULE_PARM_DESC(type, "Defines the type of each interface, each"
-		 " interface separated by commas.  The types are 'kcs',"
-		 " 'smic', and 'bt'.  For example si_type=kcs,bt will set"
-		 " the first interface to kcs and the second to bt");
-module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0);
-MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
-		 " addresses separated by commas.  Only use if an interface"
-		 " is in memory.  Otherwise, set it to zero or leave"
-		 " it blank.");
-module_param_hw_array(ports, uint, ioport, &num_ports, 0);
-MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
-		 " addresses separated by commas.  Only use if an interface"
-		 " is a port.  Otherwise, set it to zero or leave"
-		 " it blank.");
-module_param_hw_array(irqs, int, irq, &num_irqs, 0);
-MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
-		 " addresses separated by commas.  Only use if an interface"
-		 " has an interrupt.  Otherwise, set it to zero or leave"
-		 " it blank.");
-module_param_hw_array(regspacings, int, other, &num_regspacings, 0);
-MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
-		 " and each successive register used by the interface.  For"
-		 " instance, if the start address is 0xca2 and the spacing"
-		 " is 2, then the second address is at 0xca4.  Defaults"
-		 " to 1.");
-module_param_hw_array(regsizes, int, other, &num_regsizes, 0);
-MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
-		 " This should generally be 1, 2, 4, or 8 for an 8-bit,"
-		 " 16-bit, 32-bit, or 64-bit register.  Use this if you"
-		 " the 8-bit IPMI register has to be read from a larger"
-		 " register.");
-module_param_hw_array(regshifts, int, other, &num_regshifts, 0);
-MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
-		 " IPMI register, in bits.  For instance, if the data"
-		 " is read from a 32-bit word and the IPMI data is in"
-		 " bit 8-15, then the shift would be 8");
-module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0);
-MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
-		 " the controller.  Normally this is 0x20, but can be"
-		 " overridden by this parm.  This is an array indexed"
-		 " by interface number.");
 module_param_array(force_kipmid, int, &num_force_kipmid, 0);
 MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
 		 " disabled(0).  Normally the IPMI driver auto-detects"
@@ -1691,64 +1626,6 @@ static struct smi_info *smi_info_alloc(void)
 	return info;
 }
 
-static int hardcode_find_bmc(void)
-{
-	int ret = -ENODEV;
-	int             i;
-	struct si_sm_io io;
-
-	memset(&io, 0, sizeof(io));
-	for (i = 0; i < SI_MAX_PARMS; i++) {
-		if (!ports[i] && !addrs[i])
-			continue;
-
-		io.addr_source = SI_HARDCODED;
-		pr_info(PFX "probing via hardcoded address\n");
-
-		if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
-			io.si_type = SI_KCS;
-		} else if (strcmp(si_type[i], "smic") == 0) {
-			io.si_type = SI_SMIC;
-		} else if (strcmp(si_type[i], "bt") == 0) {
-			io.si_type = SI_BT;
-		} else {
-			pr_warn(PFX "Interface type specified for interface %d, was invalid: %s\n",
-				i, si_type[i]);
-			continue;
-		}
-
-		if (ports[i]) {
-			/* An I/O port */
-			io.addr_data = ports[i];
-			io.addr_type = IPMI_IO_ADDR_SPACE;
-		} else if (addrs[i]) {
-			/* A memory port */
-			io.addr_data = addrs[i];
-			io.addr_type = IPMI_MEM_ADDR_SPACE;
-		} else {
-			pr_warn(PFX "Interface type specified for interface %d, but port and address were not set or set to zero.\n",
-				i);
-			continue;
-		}
-
-		io.addr = NULL;
-		io.regspacing = regspacings[i];
-		if (!io.regspacing)
-			io.regspacing = DEFAULT_REGSPACING;
-		io.regsize = regsizes[i];
-		if (!io.regsize)
-			io.regsize = DEFAULT_REGSIZE;
-		io.regshift = regshifts[i];
-		io.irq = irqs[i];
-		if (io.irq)
-			io.irq_setup = ipmi_std_irq_setup;
-		io.slave_addr = slave_addrs[i];
-
-		ret = ipmi_si_add_smi(&io);
-	}
-	return ret;
-}
-
 #ifdef CONFIG_ACPI
 
 /*
@@ -3349,8 +3226,6 @@ out_err:
 
 static int init_ipmi_si(void)
 {
-	int  i;
-	char *str;
 	int  rv;
 	struct smi_info *e;
 	enum ipmi_addr_src type = SI_INVALID;
@@ -3366,26 +3241,11 @@ static int init_ipmi_si(void)
 		}
 	}
 
-	/* Parse out the si_type string into its components. */
-	str = si_type_str;
-	if (*str != '\0') {
-		for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) {
-			si_type[i] = str;
-			str = strchr(str, ',');
-			if (str) {
-				*str = '\0';
-				str++;
-			} else {
-				break;
-			}
-		}
-	}
-
 	pr_info("IPMI System Interface driver.\n");
 
 	/* If the user gave us a device, they presumably want us to use it */
-	if (!hardcode_find_bmc())
-		return 0;
+	if (!ipmi_si_hardcode_find_bmc())
+		goto do_scan;
 
 #ifdef CONFIG_PCI
 	if (si_trypci) {
@@ -3411,7 +3271,7 @@ static int init_ipmi_si(void)
 	   with multiple BMCs we assume that there will be several instances
 	   of a given type so if we succeed in registering a type then also
 	   try to register everything else of the same type */
-
+do_scan:
 	mutex_lock(&smi_infos_lock);
 	list_for_each_entry(e, &smi_infos, link) {
 		/* Try to register a device if it has an IRQ and we either