Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 - Improvements to the tlb_dump code
 - KVM fixes
 - Add support for appended DTB
 - Minor improvements to the R12000 support
 - Minor improvements to the R12000 support
 - Various platform improvments for BCM47xx
 - The usual pile of minor cleanups
 - A number of BPF fixes and improvments
 - Some improvments to the support for R3000 and DECstations
 - Some improvments to the ATH79 platform support
 - A major patchset for the JZ4740 SOC adding support for the CI20 platform
 - Add support for the Pistachio SOC
 - Minor BMIPS/BCM63xx platform support improvments.
 - Avoid "SYNC 0" as memory barrier when unlocking spinlocks
 - Add support for the XWR-1750 board.
 - Paul's __cpuinit/__cpuinitdata cleanups.
 - New Malta CPU board support large memory so enable ZONE_DMA32.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits)
  MIPS: spinlock: Adjust arch_spin_lock back-off time
  MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA
  MIPS: BCM47xx: Simplify handling SPROM revisions
  MIPS: Cobalt Don't use module_init in non-modular MTD registration.
  MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/
  MIPS: use for_each_sg()
  MIPS: BCM47xx: Don't select BCMA_HOST_PCI
  MIPS: BCM47xx: Add helper variable for storing NVRAM length
  MIPS: IRQ/IP27: Move IRQ allocation API to platform code.
  MIPS: Replace smp_mb with release barrier function in unlocks.
  MIPS: i8259: DT support
  MIPS: Malta: Basic DT plumbing
  MIPS: include errno.h for ENODEV in mips-cm.h
  MIPS: Define GCR_GIC_STATUS register fields
  MIPS: BPF: Introduce BPF ASM helpers
  MIPS: BPF: Use BPF register names to describe the ABI
  MIPS: BPF: Move register definition to the BPF header
  MIPS: net: BPF: Replace RSIZE with SZREG
  MIPS: BPF: Free up some callee-saved registers
  MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers
  ...

1 files changed, 223 insertions, 0 deletions

diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
new file mode 100644
index 000000000000..99347e2b97e8
--- /dev/null
+++ b/drivers/clk/ingenic/cgu.h
@@ -0,0 +1,223 @@
+/*
+ * Ingenic SoC CGU driver
+ *
+ * Copyright (c) 2013-2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DRIVERS_CLK_INGENIC_CGU_H__
+#define __DRIVERS_CLK_INGENIC_CGU_H__
+
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+
+/**
+ * struct ingenic_cgu_pll_info - information about a PLL
+ * @reg: the offset of the PLL's control register within the CGU
+ * @m_shift: the number of bits to shift the multiplier value by (ie. the
+ *           index of the lowest bit of the multiplier value in the PLL's
+ *           control register)
+ * @m_bits: the size of the multiplier field in bits
+ * @m_offset: the multiplier value which encodes to 0 in the PLL's control
+ *            register
+ * @n_shift: the number of bits to shift the divider value by (ie. the
+ *           index of the lowest bit of the divider value in the PLL's
+ *           control register)
+ * @n_bits: the size of the divider field in bits
+ * @n_offset: the divider value which encodes to 0 in the PLL's control
+ *            register
+ * @od_shift: the number of bits to shift the post-VCO divider value by (ie.
+ *            the index of the lowest bit of the post-VCO divider value in
+ *            the PLL's control register)
+ * @od_bits: the size of the post-VCO divider field in bits
+ * @od_max: the maximum post-VCO divider value
+ * @od_encoding: a pointer to an array mapping post-VCO divider values to
+ *               their encoded values in the PLL control register, or -1 for
+ *               unsupported values
+ * @bypass_bit: the index of the bypass bit in the PLL control register
+ * @enable_bit: the index of the enable bit in the PLL control register
+ * @stable_bit: the index of the stable bit in the PLL control register
+ */
+struct ingenic_cgu_pll_info {
+	unsigned reg;
+	const s8 *od_encoding;
+	u8 m_shift, m_bits, m_offset;
+	u8 n_shift, n_bits, n_offset;
+	u8 od_shift, od_bits, od_max;
+	u8 bypass_bit;
+	u8 enable_bit;
+	u8 stable_bit;
+};
+
+/**
+ * struct ingenic_cgu_mux_info - information about a clock mux
+ * @reg: offset of the mux control register within the CGU
+ * @shift: number of bits to shift the mux value by (ie. the index of
+ *         the lowest bit of the mux value within its control register)
+ * @bits: the size of the mux value in bits
+ */
+struct ingenic_cgu_mux_info {
+	unsigned reg;
+	u8 shift;
+	u8 bits;
+};
+
+/**
+ * struct ingenic_cgu_div_info - information about a divider
+ * @reg: offset of the divider control register within the CGU
+ * @shift: number of bits to shift the divide value by (ie. the index of
+ *         the lowest bit of the divide value within its control register)
+ * @bits: the size of the divide value in bits
+ * @ce_bit: the index of the change enable bit within reg, or -1 if there
+ *          isn't one
+ * @busy_bit: the index of the busy bit within reg, or -1 if there isn't one
+ * @stop_bit: the index of the stop bit within reg, or -1 if there isn't one
+ */
+struct ingenic_cgu_div_info {
+	unsigned reg;
+	u8 shift;
+	u8 bits;
+	s8 ce_bit;
+	s8 busy_bit;
+	s8 stop_bit;
+};
+
+/**
+ * struct ingenic_cgu_fixdiv_info - information about a fixed divider
+ * @div: the divider applied to the parent clock
+ */
+struct ingenic_cgu_fixdiv_info {
+	unsigned div;
+};
+
+/**
+ * struct ingenic_cgu_gate_info - information about a clock gate
+ * @reg: offset of the gate control register within the CGU
+ * @bit: offset of the bit in the register that controls the gate
+ */
+struct ingenic_cgu_gate_info {
+	unsigned reg;
+	u8 bit;
+};
+
+/**
+ * struct ingenic_cgu_custom_info - information about a custom (SoC) clock
+ * @clk_ops: custom clock operation callbacks
+ */
+struct ingenic_cgu_custom_info {
+	struct clk_ops *clk_ops;
+};
+
+/**
+ * struct ingenic_cgu_clk_info - information about a clock
+ * @name: name of the clock
+ * @type: a bitmask formed from CGU_CLK_* values
+ * @parents: an array of the indices of potential parents of this clock
+ *           within the clock_info array of the CGU, or -1 in entries
+ *           which correspond to no valid parent
+ * @pll: information valid if type includes CGU_CLK_PLL
+ * @gate: information valid if type includes CGU_CLK_GATE
+ * @mux: information valid if type includes CGU_CLK_MUX
+ * @div: information valid if type includes CGU_CLK_DIV
+ * @fixdiv: information valid if type includes CGU_CLK_FIXDIV
+ * @custom: information valid if type includes CGU_CLK_CUSTOM
+ */
+struct ingenic_cgu_clk_info {
+	const char *name;
+
+	enum {
+		CGU_CLK_NONE		= 0,
+		CGU_CLK_EXT		= BIT(0),
+		CGU_CLK_PLL		= BIT(1),
+		CGU_CLK_GATE		= BIT(2),
+		CGU_CLK_MUX		= BIT(3),
+		CGU_CLK_MUX_GLITCHFREE	= BIT(4),
+		CGU_CLK_DIV		= BIT(5),
+		CGU_CLK_FIXDIV		= BIT(6),
+		CGU_CLK_CUSTOM		= BIT(7),
+	} type;
+
+	int parents[4];
+
+	union {
+		struct ingenic_cgu_pll_info pll;
+
+		struct {
+			struct ingenic_cgu_gate_info gate;
+			struct ingenic_cgu_mux_info mux;
+			struct ingenic_cgu_div_info div;
+			struct ingenic_cgu_fixdiv_info fixdiv;
+		};
+
+		struct ingenic_cgu_custom_info custom;
+	};
+};
+
+/**
+ * struct ingenic_cgu - data about the CGU
+ * @np: the device tree node that caused the CGU to be probed
+ * @base: the ioremap'ed base address of the CGU registers
+ * @clock_info: an array containing information about implemented clocks
+ * @clocks: used to provide clocks to DT, allows lookup of struct clk*
+ * @lock: lock to be held whilst manipulating CGU registers
+ */
+struct ingenic_cgu {
+	struct device_node *np;
+	void __iomem *base;
+
+	const struct ingenic_cgu_clk_info *clock_info;
+	struct clk_onecell_data clocks;
+
+	spinlock_t lock;
+};
+
+/**
+ * struct ingenic_clk - private data for a clock
+ * @hw: see Documentation/clk.txt
+ * @cgu: a pointer to the CGU data
+ * @idx: the index of this clock in cgu->clock_info
+ */
+struct ingenic_clk {
+	struct clk_hw hw;
+	struct ingenic_cgu *cgu;
+	unsigned idx;
+};
+
+#define to_ingenic_clk(_hw) container_of(_hw, struct ingenic_clk, hw)
+
+/**
+ * ingenic_cgu_new() - create a new CGU instance
+ * @clock_info: an array of clock information structures describing the clocks
+ *              which are implemented by the CGU
+ * @num_clocks: the number of entries in clock_info
+ * @np: the device tree node which causes this CGU to be probed
+ *
+ * Return: a pointer to the CGU instance if initialisation is successful,
+ *         otherwise NULL.
+ */
+struct ingenic_cgu *
+ingenic_cgu_new(const struct ingenic_cgu_clk_info *clock_info,
+		unsigned num_clocks, struct device_node *np);
+
+/**
+ * ingenic_cgu_register_clocks() - Registers the clocks
+ * @cgu: pointer to cgu data
+ *
+ * Register the clocks described by the CGU with the common clock framework.
+ *
+ * Return: 0 on success or -errno if unsuccesful.
+ */
+int ingenic_cgu_register_clocks(struct ingenic_cgu *cgu);
+
+#endif /* __DRIVERS_CLK_INGENIC_CGU_H__ */