Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...

1 files changed, 4 insertions, 99 deletions

diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index a687e02547dc..c139bb3273ca 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -60,107 +60,12 @@
  * CLKID index values
  *
  * These indices are entirely contrived and do not map onto the hardware.
- * Migrate them out of this header and into the DT header file when they need
- * to be exposed to client nodes in DT: include/dt-bindings/clock/meson8b-clkc.h
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/gxbb-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
  */
 
-/* CLKID_UNUSED */
-/* CLKID_XTAL */
-/* CLKID_PLL_FIXED */
-/* CLKID_PLL_VID */
-/* CLKID_PLL_SYS */
-/* CLKID_FCLK_DIV2 */
-/* CLKID_FCLK_DIV3 */
-/* CLKID_FCLK_DIV4 */
-/* CLKID_FCLK_DIV5 */
-/* CLKID_FCLK_DIV7 */
-/* CLKID_CLK81 */
-/* CLKID_MALI */
-/* CLKID_CPUCLK */
-/* CLKID_ZERO */
-/* CLKID_MPEG_SEL */
-/* CLKID_MPEG_DIV */
-#define CLKID_DDR		16
-#define CLKID_DOS		17
-#define CLKID_ISA		18
-#define CLKID_PL301		19
-#define CLKID_PERIPHS		20
-#define CLKID_SPICC		21
-#define CLKID_I2C		22
-/* #define CLKID_SAR_ADC */
-#define CLKID_SMART_CARD	24
-/* #define CLKID_RNG0 */
-#define CLKID_UART0		26
-#define CLKID_SDHC		27
-#define CLKID_STREAM		28
-#define CLKID_ASYNC_FIFO	29
-/* #define CLKID_SDIO */
-#define CLKID_ABUF		31
-#define CLKID_HIU_IFACE		32
-#define CLKID_ASSIST_MISC	33
-#define CLKID_SPI		34
-#define CLKID_I2S_SPDIF		35
-/* #define CLKID_ETH */
-#define CLKID_DEMUX		37
-#define CLKID_AIU_GLUE		38
-#define CLKID_IEC958		39
-#define CLKID_I2S_OUT		40
-#define CLKID_AMCLK		41
-#define CLKID_AIFIFO2		42
-#define CLKID_MIXER		43
-#define CLKID_MIXER_IFACE	44
-#define CLKID_ADC		45
-#define CLKID_BLKMV		46
-#define CLKID_AIU		47
-#define CLKID_UART1		48
-#define CLKID_G2D		49
-/* #define CLKID_USB0 */
-/* #define CLKID_USB1 */
-#define CLKID_RESET		52
-#define CLKID_NAND		53
-#define CLKID_DOS_PARSER	54
-/* #define CLKID_USB */
-#define CLKID_VDIN1		56
-#define CLKID_AHB_ARB0		57
-#define CLKID_EFUSE		58
-#define CLKID_BOOT_ROM		59
-#define CLKID_AHB_DATA_BUS	60
-#define CLKID_AHB_CTRL_BUS	61
-#define CLKID_HDMI_INTR_SYNC	62
-#define CLKID_HDMI_PCLK		63
-/* CLKID_USB1_DDR_BRIDGE */
-/* CLKID_USB0_DDR_BRIDGE */
-#define CLKID_MMC_PCLK		66
-#define CLKID_DVIN		67
-#define CLKID_UART2		68
-/* #define CLKID_SANA */
-#define CLKID_VPU_INTR		70
-#define CLKID_SEC_AHB_AHB3_BRIDGE	71
-#define CLKID_CLK81_A9		72
-#define CLKID_VCLK2_VENCI0	73
-#define CLKID_VCLK2_VENCI1	74
-#define CLKID_VCLK2_VENCP0	75
-#define CLKID_VCLK2_VENCP1	76
-#define CLKID_GCLK_VENCI_INT	77
-#define CLKID_GCLK_VENCP_INT	78
-#define CLKID_DAC_CLK		79
-#define CLKID_AOCLK_GATE	80
-#define CLKID_IEC958_GATE	81
-#define CLKID_ENC480P		82
-#define CLKID_RNG1		83
-#define CLKID_GCLK_VENCL_INT	84
-#define CLKID_VCLK2_VENCLMCC	85
-#define CLKID_VCLK2_VENCL	86
-#define CLKID_VCLK2_OTHER	87
-#define CLKID_EDP		88
-#define CLKID_AO_MEDIA_CPU	89
-#define CLKID_AO_AHB_SRAM	90
-#define CLKID_AO_AHB_BUS	91
-#define CLKID_AO_IFACE		92
-#define CLKID_MPLL0		93
-#define CLKID_MPLL1		94
-#define CLKID_MPLL2		95
-
 #define CLK_NR_CLKS		96
 
 /* include the CLKIDs that have been made part of the stable DT binding */