Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is all driver updates, the majority of which is a bunch of new
  Qualcomm clk drivers that dominate the diffstat because we add support
  for six SoCs from that particular vendor.

  The other big change is the removal of various clk drivers that are no
  longer used now that the kernel is dropping support for those SoCs.

  Beyond that there's the usual non-critical fixes for existing drivers
  and a good number of patches from Lee Jones that cleanup a bunch of
  W=1 enabled builds.

  Removed Drivers:
   - Remove efm32 clk driver
   - Remove tango4 clk driver
   - Remove zte zx clk driver
   - Remove sirf prima2/atlast clk drivers
   - Remove u300 clk driver

  New Drivers:
   - PLL support on MStar/SigmaStar ARMv7 SoCs
   - CPU clks for Qualcomm SDX55
   - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
   - GCC clks for Qualcomm SM8350
   - GPU clks for Qualcomm SDM660/SDM630

  Updates:
   - Video clk fixups on Qualcomm SM8250
   - Improvements for multimedia clks on Qualcomm MSM8998
   - Fix many warnings with W=1 enabled builds under drivers/clk/
   - Support crystal load capacitance for Versaclock VC5
   - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
     glitches at boot
   - Convert Xilinx VCU clk driver to a proper clk provider driver
   - Expose Xilinx ZynqMP clk driver to more platforms
   - Amlogic pll driver fixup
   - Amlogic meson8b clock controller dt support clean up
   - Remove mipi clk from the Amlogic axg clock controller
   - New Rockchip rk3368 clock ids related to camera input
   - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
     reparenting
   - A series from Liu Ying that adds some SCU clocks support for
     i.MX8qxp DC0/MIPI-LVDS subsystems
   - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
     and clkout1/2 support for i.MX8MM/MN
   - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
   - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
   - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
     (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
     (SYS-DMAC) clocks on Renesas R-Car V3U
   - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
   - Allwinner H616 SoC clk support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
  clk: mstar: msc313-mpll: Fix format specifier
  clk: mstar: Allow MStar clk drivers to be compile tested
  clk: qoriq: use macros to generate pll_mask
  clk: qcom: Add Global Clock controller (GCC) driver for SC7280
  dt-bindings: clock: Add SC7280 GCC clock binding
  clk: qcom: rpmh: Add support for RPMH clocks on SC7280
  dt-bindings: clock: Add RPMHCC bindings for SC7280
  clk: qcom: gcc-sm8350: add gdsc
  dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
  clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
  clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
  clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
  dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
  clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
  clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
  clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
  clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
  clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
  clk: qcom: gdsc: Implement NO_RET_PERIPH flag
  clk: mstar: MStar/SigmaStar MPLL driver
  ...

7 files changed, 1272 insertions, 7 deletions

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index ce5f5847d5d3..cd46d8853876 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -32,8 +32,13 @@ config SUN50I_H6_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUN50I_H616_CCU
+	bool "Support for the Allwinner H616 CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
 config SUN50I_H6_R_CCU
-	bool "Support for the Allwinner H6 PRCM CCU"
+	bool "Support for the Allwinner H6 and H616 PRCM CCU"
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 3eb5cff40eac..96c324306d97 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
 obj-$(CONFIG_SUN50I_A100_CCU)	+= ccu-sun50i-a100.o
 obj-$(CONFIG_SUN50I_A100_R_CCU)	+= ccu-sun50i-a100-r.o
 obj-$(CONFIG_SUN50I_H6_CCU)	+= ccu-sun50i-h6.o
+obj-$(CONFIG_SUN50I_H616_CCU)	+= ccu-sun50i-h616.o
 obj-$(CONFIG_SUN50I_H6_R_CCU)	+= ccu-sun50i-h6-r.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
index 50f8d1bc7046..f8909a7ed553 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c
@@ -91,6 +91,8 @@ static SUNXI_CCU_GATE(r_apb2_uart_clk,	"r-apb2-uart",	"r-apb2",
 		      0x18c, BIT(0), 0);
 static SUNXI_CCU_GATE(r_apb2_i2c_clk,	"r-apb2-i2c",	"r-apb2",
 		      0x19c, BIT(0), 0);
+static SUNXI_CCU_GATE(r_apb2_rsb_clk,	"r-apb2-rsb",	"r-apb2",
+		      0x1bc, BIT(0), 0);
 static SUNXI_CCU_GATE(r_apb1_ir_clk,	"r-apb1-ir",	"r-apb1",
 		      0x1cc, BIT(0), 0);
 static SUNXI_CCU_GATE(r_apb1_w1_clk,	"r-apb1-w1",	"r-apb1",
@@ -130,12 +132,23 @@ static struct ccu_common *sun50i_h6_r_ccu_clks[] = {
 	&r_apb1_pwm_clk.common,
 	&r_apb2_uart_clk.common,
 	&r_apb2_i2c_clk.common,
+	&r_apb2_rsb_clk.common,
 	&r_apb1_ir_clk.common,
 	&r_apb1_w1_clk.common,
 	&ir_clk.common,
 	&w1_clk.common,
 };
 
+static struct ccu_common *sun50i_h616_r_ccu_clks[] = {
+	&r_apb1_clk.common,
+	&r_apb2_clk.common,
+	&r_apb1_twd_clk.common,
+	&r_apb2_i2c_clk.common,
+	&r_apb2_rsb_clk.common,
+	&r_apb1_ir_clk.common,
+	&ir_clk.common,
+};
+
 static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
 	.hws	= {
 		[CLK_AR100]		= &ar100_clk.common.hw,
@@ -147,6 +160,7 @@ static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
 		[CLK_R_APB1_PWM]	= &r_apb1_pwm_clk.common.hw,
 		[CLK_R_APB2_UART]	= &r_apb2_uart_clk.common.hw,
 		[CLK_R_APB2_I2C]	= &r_apb2_i2c_clk.common.hw,
+		[CLK_R_APB2_RSB]	= &r_apb2_rsb_clk.common.hw,
 		[CLK_R_APB1_IR]		= &r_apb1_ir_clk.common.hw,
 		[CLK_R_APB1_W1]		= &r_apb1_w1_clk.common.hw,
 		[CLK_IR]		= &ir_clk.common.hw,
@@ -155,16 +169,38 @@ static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
 	.num	= CLK_NUMBER,
 };
 
+static struct clk_hw_onecell_data sun50i_h616_r_hw_clks = {
+	.hws	= {
+		[CLK_R_AHB]		= &r_ahb_clk.hw,
+		[CLK_R_APB1]		= &r_apb1_clk.common.hw,
+		[CLK_R_APB2]		= &r_apb2_clk.common.hw,
+		[CLK_R_APB1_TWD]	= &r_apb1_twd_clk.common.hw,
+		[CLK_R_APB2_I2C]	= &r_apb2_i2c_clk.common.hw,
+		[CLK_R_APB2_RSB]	= &r_apb2_rsb_clk.common.hw,
+		[CLK_R_APB1_IR]		= &r_apb1_ir_clk.common.hw,
+		[CLK_IR]		= &ir_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
 static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = {
 	[RST_R_APB1_TIMER]	=  { 0x11c, BIT(16) },
 	[RST_R_APB1_TWD]	=  { 0x12c, BIT(16) },
 	[RST_R_APB1_PWM]	=  { 0x13c, BIT(16) },
 	[RST_R_APB2_UART]	=  { 0x18c, BIT(16) },
 	[RST_R_APB2_I2C]	=  { 0x19c, BIT(16) },
+	[RST_R_APB2_RSB]	=  { 0x1bc, BIT(16) },
 	[RST_R_APB1_IR]		=  { 0x1cc, BIT(16) },
 	[RST_R_APB1_W1]		=  { 0x1ec, BIT(16) },
 };
 
+static struct ccu_reset_map sun50i_h616_r_ccu_resets[] = {
+	[RST_R_APB1_TWD]	=  { 0x12c, BIT(16) },
+	[RST_R_APB2_I2C]	=  { 0x19c, BIT(16) },
+	[RST_R_APB2_RSB]	=  { 0x1bc, BIT(16) },
+	[RST_R_APB1_IR]		=  { 0x1cc, BIT(16) },
+};
+
 static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = {
 	.ccu_clks	= sun50i_h6_r_ccu_clks,
 	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_r_ccu_clks),
@@ -175,6 +211,16 @@ static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_h6_r_ccu_resets),
 };
 
+static const struct sunxi_ccu_desc sun50i_h616_r_ccu_desc = {
+	.ccu_clks	= sun50i_h616_r_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_h616_r_ccu_clks),
+
+	.hw_clks	= &sun50i_h616_r_hw_clks,
+
+	.resets		= sun50i_h616_r_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h616_r_ccu_resets),
+};
+
 static void __init sunxi_r_ccu_init(struct device_node *node,
 				    const struct sunxi_ccu_desc *desc)
 {
@@ -195,3 +241,10 @@ static void __init sun50i_h6_r_ccu_setup(struct device_node *node)
 }
 CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu",
 	       sun50i_h6_r_ccu_setup);
+
+static void __init sun50i_h616_r_ccu_setup(struct device_node *node)
+{
+	sunxi_r_ccu_init(node, &sun50i_h616_r_ccu_desc);
+}
+CLK_OF_DECLARE(sun50i_h616_r_ccu, "allwinner,sun50i-h616-r-ccu",
+	       sun50i_h616_r_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
index 782117dc0b28..7e290b840803 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h
@@ -14,6 +14,6 @@
 
 #define CLK_R_APB2	3
 
-#define CLK_NUMBER	(CLK_W1 + 1)
+#define CLK_NUMBER	(CLK_R_APB2_RSB + 1)
 
 #endif /* _CCU_SUN50I_H6_R_H */
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index f2497d0a4683..bff446b78290 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -237,7 +237,7 @@ static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
 static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
 			     psi_ahb1_ahb2_parents,
 			     0x510,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
@@ -246,19 +246,19 @@ static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
 						       "psi-ahb1-ahb2",
 						       "pll-periph0" };
 static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
@@ -682,7 +682,7 @@ static struct ccu_mux hdmi_cec_clk = {
 
 	.common		= {
 		.reg		= 0xb10,
-		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
 		.hw.init	= CLK_HW_INIT_PARENTS("hdmi-cec",
 						      hdmi_cec_parents,
 						      &ccu_mux_ops,
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
new file mode 100644
index 000000000000..225307305880
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
@@ -0,0 +1,1150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Arm Ltd.
+ * Based on the H6 CCU driver, which is:
+ *   Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-h616.h"
+
+/*
+ * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
+ * P should only be used for output frequencies lower than 288 MHz.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
+ *
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "M is only used for backdoor
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_H616_PLL_CPUX_REG	0x000
+static struct ccu_mult pll_cpux_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.mult		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpux", "osc24M",
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+#define SUN50I_H616_PLL_DDR0_REG	0x010
+static struct ccu_nkmp pll_ddr0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x010,
+		.hw.init	= CLK_HW_INIT("pll-ddr0", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_DDR1_REG	0x018
+static struct ccu_nkmp pll_ddr1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x018,
+		.hw.init	= CLK_HW_INIT("pll-ddr1", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_PERIPH0_REG	0x020
+static struct ccu_nkmp pll_periph0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x020,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph0", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_PERIPH1_REG	0x028
+static struct ccu_nkmp pll_periph1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 2,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph1", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_GPU_REG		0x030
+static struct ccu_nkmp pll_gpu_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x030,
+		.hw.init	= CLK_HW_INIT("pll-gpu", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * For Video PLLs, the output divider is described as "used for testing"
+ * in the user manual. So it's not modelled and forced to 0.
+ */
+#define SUN50I_H616_PLL_VIDEO0_REG	0x040
+static struct ccu_nm pll_video0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.min_rate	= 288000000,
+	.max_rate	= 2400000000UL,
+	.common		= {
+		.reg		= 0x040,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video0", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_VIDEO1_REG	0x048
+static struct ccu_nm pll_video1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.min_rate	= 288000000,
+	.max_rate	= 2400000000UL,
+	.common		= {
+		.reg		= 0x048,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video1", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_VIDEO2_REG	0x050
+static struct ccu_nm pll_video2_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.min_rate	= 288000000,
+	.max_rate	= 2400000000UL,
+	.common		= {
+		.reg		= 0x050,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video2", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_VE_REG		0x058
+static struct ccu_nkmp pll_ve_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x058,
+		.hw.init	= CLK_HW_INIT("pll-ve", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H616_PLL_DE_REG		0x060
+static struct ccu_nkmp pll_de_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x060,
+		.hw.init	= CLK_HW_INIT("pll-de", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * TODO: Determine SDM settings for the audio PLL. The manual suggests
+ * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2, pattern=0xe000c49b
+ * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3, OUTPUT_DIV=2,
+ * pattern=0xe001288c for 22.5792 MHz.
+ * This clashes with our fixed PLL_POST_DIV_P.
+ */
+#define SUN50I_H616_PLL_AUDIO_REG	0x078
+static struct ccu_nm pll_audio_hs_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.common		= {
+		.reg		= 0x078,
+		.hw.init	= CLK_HW_INIT("pll-audio-hs", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static const char * const cpux_parents[] = { "osc24M", "osc32k",
+					"iosc", "pll-cpux", "pll-periph0" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
+static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
+
+static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
+						      "iosc", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
+			     psi_ahb1_ahb2_parents,
+			     0x510,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
+						       "psi-ahb1-ahb2",
+						       "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
+			     0, 2,	/* M */
+			     8, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+					     "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
+					0, 3,	/* M */
+					24, 2,	/* mux */
+					BIT(31),	/* gate */
+					CLK_IS_CRITICAL);
+
+static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
+				       0, 4,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
+		      0x60c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
+				       de_parents,
+				       0x620,
+				       0, 4,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
+		      0x62c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", de_parents, 0x630,
+				       0, 4,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
+		      0x63c, BIT(0), 0);
+
+static const char * const gpu0_parents[] = { "pll-gpu", "gpu1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents, 0x670,
+				       0, 2,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x", 0x674,
+					0, 2,	/* M */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
+		      0x67c, BIT(0), 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
+		      0x68c, BIT(0), 0);
+
+static const char * const ve_parents[] = { "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+				       0, 3,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
+		      0x69c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
+		      0x70c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
+		      0x73c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
+		      0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
+		      0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static struct ccu_div dram_clk = {
+	.div		= _SUNXI_CCU_DIV(0, 2),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common	= {
+		.reg		= 0x800,
+		.hw.init	= CLK_HW_INIT_PARENTS("dram",
+						      dram_parents,
+						      &ccu_div_ops,
+						      CLK_IS_CRITICAL),
+	},
+};
+
+static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
+		      0x804, BIT(0), 0);
+static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
+		      0x804, BIT(1), 0);
+static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
+		      0x804, BIT(2), 0);
+static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
+		      0x804, BIT(3), 0);
+static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
+		      0x804, BIT(5), 0);
+static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
+		      0x804, BIT(10), 0);
+
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
+		      0x80c, BIT(0), CLK_IS_CRITICAL);
+
+static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
+					     "pll-periph1", "pll-periph0-2x",
+					     "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
+
+static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
+					    "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
+					  0, 4,		/* M */
+					  8, 2,		/* N */
+					  24, 2,	/* mux */
+					  BIT(31),	/* gate */
+					  2,		/* post-div */
+					  0);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2", 0x90c, BIT(5), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2", 0x91c, BIT(4), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
+
+static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
+		      BIT(31) | BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_emac0_clk, "bus-emac0", "ahb3", 0x97c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_emac1_clk, "bus-emac1", "ahb3", 0x97c, BIT(1), 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
+
+static const char * const audio_parents[] = { "pll-audio-1x", "pll-audio-2x",
+					      "pll-audio-4x", "pll-audio-hs" };
+static struct ccu_div spdif_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa20,
+		.hw.init	= CLK_HW_INIT_PARENTS("spdif",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
+
+static struct ccu_div dmic_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa40,
+		.hw.init	= CLK_HW_INIT_PARENTS("dmic",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_1x_clk, "audio-codec-1x",
+				 audio_parents, 0xa50,
+				 0, 4,	/* M */
+				 24, 2,	/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
+				 audio_parents, 0xa54,
+				 0, 4,	/* M */
+				 24, 2,	/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
+		BIT(0), 0);
+
+static struct ccu_div audio_hub_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa60,
+		.hw.init	= CLK_HW_INIT_PARENTS("audio-hub",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
+
+/*
+ * There are OHCI 12M clock source selection bits for the four USB 2.0 ports.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN50I_H616_USB0_CLK_REG		0xa70
+#define SUN50I_H616_USB1_CLK_REG		0xa74
+#define SUN50I_H616_USB2_CLK_REG		0xa78
+#define SUN50I_H616_USB3_CLK_REG		0xa7c
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M", 0xa78, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M", 0xa78, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc24M", 0xa7c, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb3", 0xa8c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb3", 0xa8c, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
+
+static SUNXI_CCU_GATE(bus_keyadc_clk, "bus-keyadc", "apb1", 0xa9c, BIT(0), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video0-4x",
+					     "pll-video2", "pll-video2-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04, BIT(31), 0);
+
+static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
+static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
+	{ .index = 1, .div = 36621 },
+};
+
+#define SUN50I_H616_HDMI_CEC_CLK_REG		0xb10
+static struct ccu_mux hdmi_cec_clk = {
+	.enable		= BIT(31) | BIT(30),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.fixed_predivs	= hdmi_cec_predivs,
+		.n_predivs	= ARRAY_SIZE(hdmi_cec_predivs),
+	},
+
+	.common		= {
+		.reg		= 0xb10,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("hdmi-cec",
+						      hdmi_cec_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
+		      0xb5c, BIT(0), 0);
+
+static const char * const tcon_tv_parents[] = { "pll-video0",
+						"pll-video0-4x",
+						"pll-video1",
+						"pll-video1-4x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
+				  tcon_tv_parents, 0xb80,
+				  0, 4,		/* M */
+				  8, 2,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv1_clk, "tcon-tv1",
+				  tcon_tv_parents, 0xb84,
+				  0, 4,		/* M */
+				  8, 2,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
+		      0xb9c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon_tv1_clk, "bus-tcon-tv1", "ahb3",
+		      0xb9c, BIT(1), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(tve0_clk, "tve0",
+				  tcon_tv_parents, 0xbb0,
+				  0, 4,		/* M */
+				  8, 2,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb3",
+		      0xbbc, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb3",
+		      0xbbc, BIT(1), 0);
+
+static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
+
+/* Fixed factor clocks */
+static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
+
+static const struct clk_hw *clk_parent_pll_audio[] = {
+	&pll_audio_hs_clk.common.hw
+};
+
+/*
+ * The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200
+ * rates can be set exactly in conjunction with sigma-delta modulation.
+ */
+static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x",
+			    clk_parent_pll_audio,
+			    96, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
+			    clk_parent_pll_audio,
+			    48, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
+			    clk_parent_pll_audio,
+			    24, 1, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_periph0_parents[] = {
+	&pll_periph0_clk.common.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
+			    pll_periph0_parents,
+			    1, 2, 0);
+
+static const struct clk_hw *pll_periph1_parents[] = {
+	&pll_periph1_clk.common.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x",
+			    pll_periph1_parents,
+			    1, 2, 0);
+
+static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x",
+			   &pll_video0_clk.common.hw,
+			   1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x",
+			   &pll_video1_clk.common.hw,
+			   1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HW(pll_video2_4x_clk, "pll-video2-4x",
+			   &pll_video2_clk.common.hw,
+			   1, 4, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_h616_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_ddr1_clk.common,
+	&pll_periph0_clk.common,
+	&pll_periph1_clk.common,
+	&pll_gpu_clk.common,
+	&pll_video0_clk.common,
+	&pll_video1_clk.common,
+	&pll_video2_clk.common,
+	&pll_ve_clk.common,
+	&pll_de_clk.common,
+	&pll_audio_hs_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&cpux_apb_clk.common,
+	&psi_ahb1_ahb2_clk.common,
+	&ahb3_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&mbus_clk.common,
+	&de_clk.common,
+	&bus_de_clk.common,
+	&deinterlace_clk.common,
+	&bus_deinterlace_clk.common,
+	&g2d_clk.common,
+	&bus_g2d_clk.common,
+	&gpu0_clk.common,
+	&bus_gpu_clk.common,
+	&gpu1_clk.common,
+	&ce_clk.common,
+	&bus_ce_clk.common,
+	&ve_clk.common,
+	&bus_ve_clk.common,
+	&bus_dma_clk.common,
+	&bus_hstimer_clk.common,
+	&avs_clk.common,
+	&bus_dbg_clk.common,
+	&bus_psi_clk.common,
+	&bus_pwm_clk.common,
+	&bus_iommu_clk.common,
+	&dram_clk.common,
+	&mbus_dma_clk.common,
+	&mbus_ve_clk.common,
+	&mbus_ce_clk.common,
+	&mbus_ts_clk.common,
+	&mbus_nand_clk.common,
+	&mbus_g2d_clk.common,
+	&bus_dram_clk.common,
+	&nand0_clk.common,
+	&nand1_clk.common,
+	&bus_nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&bus_uart5_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_i2c3_clk.common,
+	&bus_i2c4_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&emac_25m_clk.common,
+	&bus_emac0_clk.common,
+	&bus_emac1_clk.common,
+	&ts_clk.common,
+	&bus_ts_clk.common,
+	&bus_ths_clk.common,
+	&spdif_clk.common,
+	&bus_spdif_clk.common,
+	&dmic_clk.common,
+	&bus_dmic_clk.common,
+	&audio_codec_1x_clk.common,
+	&audio_codec_4x_clk.common,
+	&bus_audio_codec_clk.common,
+	&audio_hub_clk.common,
+	&bus_audio_hub_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_ohci1_clk.common,
+	&usb_phy1_clk.common,
+	&usb_ohci2_clk.common,
+	&usb_phy2_clk.common,
+	&usb_ohci3_clk.common,
+	&usb_phy3_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci1_clk.common,
+	&bus_ohci2_clk.common,
+	&bus_ohci3_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ehci1_clk.common,
+	&bus_ehci2_clk.common,
+	&bus_ehci3_clk.common,
+	&bus_otg_clk.common,
+	&bus_keyadc_clk.common,
+	&hdmi_clk.common,
+	&hdmi_slow_clk.common,
+	&hdmi_cec_clk.common,
+	&bus_hdmi_clk.common,
+	&bus_tcon_top_clk.common,
+	&tcon_tv0_clk.common,
+	&tcon_tv1_clk.common,
+	&bus_tcon_tv0_clk.common,
+	&bus_tcon_tv1_clk.common,
+	&tve0_clk.common,
+	&bus_tve_top_clk.common,
+	&bus_tve0_clk.common,
+	&hdcp_clk.common,
+	&bus_hdcp_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_h616_hw_clks = {
+	.hws	= {
+		[CLK_OSC12M]		= &osc12M_clk.hw,
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_DDR1]		= &pll_ddr1_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_4X]	= &pll_video0_4x_clk.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_4X]	= &pll_video1_4x_clk.hw,
+		[CLK_PLL_VIDEO2]	= &pll_video2_clk.common.hw,
+		[CLK_PLL_VIDEO2_4X]	= &pll_video2_4x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_PLL_AUDIO_HS]	= &pll_audio_hs_clk.common.hw,
+		[CLK_PLL_AUDIO_1X]	= &pll_audio_1x_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_CPUX_APB]		= &cpux_apb_clk.common.hw,
+		[CLK_PSI_AHB1_AHB2]	= &psi_ahb1_ahb2_clk.common.hw,
+		[CLK_AHB3]		= &ahb3_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_G2D]		= &g2d_clk.common.hw,
+		[CLK_BUS_G2D]		= &bus_g2d_clk.common.hw,
+		[CLK_GPU0]		= &gpu0_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_GPU1]		= &gpu1_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_BUS_PSI]		= &bus_psi_clk.common.hw,
+		[CLK_BUS_PWM]		= &bus_pwm_clk.common.hw,
+		[CLK_BUS_IOMMU]		= &bus_iommu_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_MBUS_DMA]		= &mbus_dma_clk.common.hw,
+		[CLK_MBUS_VE]		= &mbus_ve_clk.common.hw,
+		[CLK_MBUS_CE]		= &mbus_ce_clk.common.hw,
+		[CLK_MBUS_TS]		= &mbus_ts_clk.common.hw,
+		[CLK_MBUS_NAND]		= &mbus_nand_clk.common.hw,
+		[CLK_MBUS_G2D]		= &mbus_g2d_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_NAND0]		= &nand0_clk.common.hw,
+		[CLK_NAND1]		= &nand1_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_BUS_UART5]		= &bus_uart5_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_I2C4]		= &bus_i2c4_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_EMAC_25M]		= &emac_25m_clk.common.hw,
+		[CLK_BUS_EMAC0]		= &bus_emac0_clk.common.hw,
+		[CLK_BUS_EMAC1]		= &bus_emac1_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_BUS_TS]		= &bus_ts_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_DMIC]		= &dmic_clk.common.hw,
+		[CLK_BUS_DMIC]		= &bus_dmic_clk.common.hw,
+		[CLK_AUDIO_CODEC_1X]	= &audio_codec_1x_clk.common.hw,
+		[CLK_AUDIO_CODEC_4X]	= &audio_codec_4x_clk.common.hw,
+		[CLK_BUS_AUDIO_CODEC]	= &bus_audio_codec_clk.common.hw,
+		[CLK_AUDIO_HUB]		= &audio_hub_clk.common.hw,
+		[CLK_BUS_AUDIO_HUB]	= &bus_audio_hub_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_OHCI2]		= &usb_ohci2_clk.common.hw,
+		[CLK_USB_PHY2]		= &usb_phy2_clk.common.hw,
+		[CLK_USB_OHCI3]		= &usb_ohci3_clk.common.hw,
+		[CLK_USB_PHY3]		= &usb_phy3_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
+		[CLK_BUS_OHCI2]		= &bus_ohci2_clk.common.hw,
+		[CLK_BUS_OHCI3]		= &bus_ohci3_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
+		[CLK_BUS_EHCI2]		= &bus_ehci2_clk.common.hw,
+		[CLK_BUS_EHCI3]		= &bus_ehci3_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_KEYADC]	= &bus_keyadc_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_HDMI_SLOW]		= &hdmi_slow_clk.common.hw,
+		[CLK_HDMI_CEC]		= &hdmi_cec_clk.common.hw,
+		[CLK_BUS_HDMI]		= &bus_hdmi_clk.common.hw,
+		[CLK_BUS_TCON_TOP]	= &bus_tcon_top_clk.common.hw,
+		[CLK_TCON_TV0]		= &tcon_tv0_clk.common.hw,
+		[CLK_TCON_TV1]		= &tcon_tv1_clk.common.hw,
+		[CLK_BUS_TCON_TV0]	= &bus_tcon_tv0_clk.common.hw,
+		[CLK_BUS_TCON_TV1]	= &bus_tcon_tv1_clk.common.hw,
+		[CLK_TVE0]		= &tve0_clk.common.hw,
+		[CLK_BUS_TVE_TOP]	= &bus_tve_top_clk.common.hw,
+		[CLK_BUS_TVE0]		= &bus_tve0_clk.common.hw,
+		[CLK_HDCP]		= &hdcp_clk.common.hw,
+		[CLK_BUS_HDCP]		= &bus_hdcp_clk.common.hw,
+	},
+	.num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h616_ccu_resets[] = {
+	[RST_MBUS]		= { 0x540, BIT(30) },
+
+	[RST_BUS_DE]		= { 0x60c, BIT(16) },
+	[RST_BUS_DEINTERLACE]	= { 0x62c, BIT(16) },
+	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
+	[RST_BUS_CE]		= { 0x68c, BIT(16) },
+	[RST_BUS_VE]		= { 0x69c, BIT(16) },
+	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
+	[RST_BUS_HSTIMER]	= { 0x73c, BIT(16) },
+	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
+	[RST_BUS_PSI]		= { 0x79c, BIT(16) },
+	[RST_BUS_PWM]		= { 0x7ac, BIT(16) },
+	[RST_BUS_IOMMU]		= { 0x7bc, BIT(16) },
+	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
+	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
+	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
+	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
+	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
+	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
+	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
+	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
+	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
+	[RST_BUS_UART4]		= { 0x90c, BIT(20) },
+	[RST_BUS_UART5]		= { 0x90c, BIT(21) },
+	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
+	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
+	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
+	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_I2C4]		= { 0x91c, BIT(20) },
+	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
+	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
+	[RST_BUS_EMAC0]		= { 0x97c, BIT(16) },
+	[RST_BUS_EMAC1]		= { 0x97c, BIT(17) },
+	[RST_BUS_TS]		= { 0x9bc, BIT(16) },
+	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
+	[RST_BUS_SPDIF]		= { 0xa2c, BIT(16) },
+	[RST_BUS_DMIC]		= { 0xa4c, BIT(16) },
+	[RST_BUS_AUDIO_CODEC]	= { 0xa5c, BIT(16) },
+	[RST_BUS_AUDIO_HUB]	= { 0xa6c, BIT(16) },
+
+	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
+	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
+	[RST_USB_PHY2]		= { 0xa78, BIT(30) },
+	[RST_USB_PHY3]		= { 0xa7c, BIT(30) },
+	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
+	[RST_BUS_OHCI1]		= { 0xa8c, BIT(17) },
+	[RST_BUS_OHCI2]		= { 0xa8c, BIT(18) },
+	[RST_BUS_OHCI3]		= { 0xa8c, BIT(19) },
+	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
+	[RST_BUS_EHCI1]		= { 0xa8c, BIT(21) },
+	[RST_BUS_EHCI2]		= { 0xa8c, BIT(22) },
+	[RST_BUS_EHCI3]		= { 0xa8c, BIT(23) },
+	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
+	[RST_BUS_KEYADC]	= { 0xa9c, BIT(16) },
+
+	[RST_BUS_HDMI]		= { 0xb1c, BIT(16) },
+	[RST_BUS_HDMI_SUB]	= { 0xb1c, BIT(17) },
+	[RST_BUS_TCON_TOP]	= { 0xb5c, BIT(16) },
+	[RST_BUS_TCON_TV0]	= { 0xb9c, BIT(16) },
+	[RST_BUS_TCON_TV1]	= { 0xb9c, BIT(17) },
+	[RST_BUS_TVE_TOP]	= { 0xbbc, BIT(16) },
+	[RST_BUS_TVE0]		= { 0xbbc, BIT(17) },
+	[RST_BUS_HDCP]		= { 0xc4c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h616_ccu_desc = {
+	.ccu_clks	= sun50i_h616_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_h616_ccu_clks),
+
+	.hw_clks	= &sun50i_h616_hw_clks,
+
+	.resets		= sun50i_h616_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h616_ccu_resets),
+};
+
+static const u32 pll_regs[] = {
+	SUN50I_H616_PLL_CPUX_REG,
+	SUN50I_H616_PLL_DDR0_REG,
+	SUN50I_H616_PLL_DDR1_REG,
+	SUN50I_H616_PLL_PERIPH0_REG,
+	SUN50I_H616_PLL_PERIPH1_REG,
+	SUN50I_H616_PLL_GPU_REG,
+	SUN50I_H616_PLL_VIDEO0_REG,
+	SUN50I_H616_PLL_VIDEO1_REG,
+	SUN50I_H616_PLL_VIDEO2_REG,
+	SUN50I_H616_PLL_VE_REG,
+	SUN50I_H616_PLL_DE_REG,
+	SUN50I_H616_PLL_AUDIO_REG,
+};
+
+static const u32 pll_video_regs[] = {
+	SUN50I_H616_PLL_VIDEO0_REG,
+	SUN50I_H616_PLL_VIDEO1_REG,
+	SUN50I_H616_PLL_VIDEO2_REG,
+};
+
+static const u32 usb2_clk_regs[] = {
+	SUN50I_H616_USB0_CLK_REG,
+	SUN50I_H616_USB1_CLK_REG,
+	SUN50I_H616_USB2_CLK_REG,
+	SUN50I_H616_USB3_CLK_REG,
+};
+
+static void __init sun50i_h616_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+	int i;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%pOF: Could not map clock registers\n", node);
+		return;
+	}
+
+	/* Enable the lock bits and the output enable bits on all PLLs */
+	for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+		val = readl(reg + pll_regs[i]);
+		val |= BIT(29) | BIT(27);
+		writel(val, reg + pll_regs[i]);
+	}
+
+	/*
+	 * Force the output divider of video PLLs to 0.
+	 *
+	 * See the comment before pll-video0 definition for the reason.
+	 */
+	for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
+		val = readl(reg + pll_video_regs[i]);
+		val &= ~BIT(0);
+		writel(val, reg + pll_video_regs[i]);
+	}
+
+	/*
+	 * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
+	 *
+	 * This clock mux is still mysterious, and the code just enforces
+	 * it to have a valid clock parent.
+	 */
+	for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
+		val = readl(reg + usb2_clk_regs[i]);
+		val &= ~GENMASK(25, 24);
+		writel(val, reg + usb2_clk_regs[i]);
+	}
+
+	/*
+	 * Force the post-divider of pll-audio to 12 and the output divider
+	 * of it to 2, so 24576000 and 22579200 rates can be set exactly.
+	 */
+	val = readl(reg + SUN50I_H616_PLL_AUDIO_REG);
+	val &= ~(GENMASK(21, 16) | BIT(0));
+	writel(val | (11 << 16) | BIT(0), reg + SUN50I_H616_PLL_AUDIO_REG);
+
+	/*
+	 * First clock parent (osc32K) is unusable for CEC. But since there
+	 * is no good way to force parent switch (both run with same frequency),
+	 * just set second clock parent here.
+	 */
+	val = readl(reg + SUN50I_H616_HDMI_CEC_CLK_REG);
+	val |= BIT(24);
+	writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG);
+
+	i = sunxi_ccu_probe(node, reg, &sun50i_h616_ccu_desc);
+	if (i)
+		pr_err("%pOF: probing clocks fails: %d\n", node, i);
+}
+
+CLK_OF_DECLARE(sun50i_h616_ccu, "allwinner,sun50i-h616-ccu",
+	       sun50i_h616_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
new file mode 100644
index 000000000000..dd671b413f22
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2020 Arm Ltd.
+ */
+
+#ifndef _CCU_SUN50I_H616_H_
+#define _CCU_SUN50I_H616_H_
+
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+
+#define CLK_OSC12M		0
+#define CLK_PLL_CPUX		1
+#define CLK_PLL_DDR0		2
+#define CLK_PLL_DDR1		3
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X	5
+#define CLK_PLL_PERIPH1		6
+#define CLK_PLL_PERIPH1_2X	7
+#define CLK_PLL_GPU		8
+#define CLK_PLL_VIDEO0		9
+#define CLK_PLL_VIDEO0_4X	10
+#define CLK_PLL_VIDEO1		11
+#define CLK_PLL_VIDEO1_4X	12
+#define CLK_PLL_VIDEO2		13
+#define CLK_PLL_VIDEO2_4X	14
+#define CLK_PLL_VE		15
+#define CLK_PLL_DE		16
+#define CLK_PLL_AUDIO_HS	17
+#define CLK_PLL_AUDIO_1X	18
+#define CLK_PLL_AUDIO_2X	19
+#define CLK_PLL_AUDIO_4X	20
+
+/* CPUX clock exported for DVFS */
+
+#define CLK_AXI			22
+#define CLK_CPUX_APB		23
+#define CLK_PSI_AHB1_AHB2	24
+#define CLK_AHB3		25
+
+/* APB1 clock exported for PIO */
+
+#define CLK_APB2		27
+#define CLK_MBUS		28
+
+/* All module clocks and bus gates are exported except DRAM */
+
+#define CLK_DRAM		49
+
+#define CLK_BUS_DRAM		56
+
+#define CLK_NUMBER		(CLK_BUS_HDCP + 1)
+
+#endif /* _CCU_SUN50I_H616_H_ */