summaryrefslogtreecommitdiff
path: root/drivers/clk
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-10 15:00:03 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-10 15:00:03 -0800
commitb44a3d2a85c64208a57362a1728efb58a6556cd6 (patch)
tree293302b3ac918eb75b442fa035eb976850163b1d /drivers/clk
parent56e0464980febfa50432a070261579415c72664e (diff)
parentd13a5c8c4c3dbe299659bcff805f79a2c83e2bbc (diff)
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/Kconfig10
-rw-r--r--drivers/clk/Makefile1
-rw-r--r--drivers/clk/berlin/bg2q.c14
-rw-r--r--drivers/clk/clk-scpi.c325
4 files changed, 343 insertions, 7 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 7a1ab24052b8..c3e3a02f7f1f 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -60,6 +60,16 @@ config COMMON_CLK_RK808
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
by control register.
+config COMMON_CLK_SCPI
+ tristate "Clock driver controlled via SCPI interface"
+ depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
+ ---help---
+ This driver provides support for clocks that are controlled
+ by firmware that implements the SCPI interface.
+
+ This driver uses SCPI Message Protocol to interact with the
+ firmware providing all the clock controls.
+
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d3e1910eebab..820714c72d36 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
+obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
obj-$(CONFIG_COMMON_CLK_SI514) += clk-si514.o
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c
index 243f421abcb4..f144547cf76c 100644
--- a/drivers/clk/berlin/bg2q.c
+++ b/drivers/clk/berlin/bg2q.c
@@ -45,7 +45,7 @@
#define REG_SDIO0XIN_CLKCTL 0x0158
#define REG_SDIO1XIN_CLKCTL 0x015c
-#define MAX_CLKS 27
+#define MAX_CLKS 28
static struct clk *clks[MAX_CLKS];
static struct clk_onecell_data clk_data;
static DEFINE_SPINLOCK(lock);
@@ -356,13 +356,13 @@ static void __init berlin2q_clock_setup(struct device_node *np)
gd->bit_idx, 0, &lock);
}
- /*
- * twdclk is derived from cpu/3
- * TODO: use cpupll until cpuclk is not available
- */
+ /* cpuclk divider is fixed to 1 */
+ clks[CLKID_CPU] =
+ clk_register_fixed_factor(NULL, "cpu", clk_names[CPUPLL],
+ 0, 1, 1);
+ /* twdclk is derived from cpu/3 */
clks[CLKID_TWD] =
- clk_register_fixed_factor(NULL, "twd", clk_names[CPUPLL],
- 0, 1, 3);
+ clk_register_fixed_factor(NULL, "twd", "cpu", 0, 1, 3);
/* check for errors on leaf clocks */
for (n = 0; n < MAX_CLKS; n++) {
diff --git a/drivers/clk/clk-scpi.c b/drivers/clk/clk-scpi.c
new file mode 100644
index 000000000000..0b501a9fef92
--- /dev/null
+++ b/drivers/clk/clk-scpi.c
@@ -0,0 +1,325 @@
+/*
+ * System Control and Power Interface (SCPI) Protocol based clock driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+
+struct scpi_clk {
+ u32 id;
+ struct clk_hw hw;
+ struct scpi_dvfs_info *info;
+ struct scpi_ops *scpi_ops;
+};
+
+#define to_scpi_clk(clk) container_of(clk, struct scpi_clk, hw)
+
+static struct platform_device *cpufreq_dev;
+
+static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return clk->scpi_ops->clk_get_val(clk->id);
+}
+
+static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ /*
+ * We can't figure out what rate it will be, so just return the
+ * rate back to the caller. scpi_clk_recalc_rate() will be called
+ * after the rate is set and we'll know what rate the clock is
+ * running at then.
+ */
+ return rate;
+}
+
+static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return clk->scpi_ops->clk_set_val(clk->id, rate);
+}
+
+static const struct clk_ops scpi_clk_ops = {
+ .recalc_rate = scpi_clk_recalc_rate,
+ .round_rate = scpi_clk_round_rate,
+ .set_rate = scpi_clk_set_rate,
+};
+
+/* find closest match to given frequency in OPP table */
+static int __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate)
+{
+ int idx;
+ u32 fmin = 0, fmax = ~0, ftmp;
+ const struct scpi_opp *opp = clk->info->opps;
+
+ for (idx = 0; idx < clk->info->count; idx++, opp++) {
+ ftmp = opp->freq;
+ if (ftmp >= (u32)rate) {
+ if (ftmp <= fmax)
+ fmax = ftmp;
+ break;
+ } else if (ftmp >= fmin) {
+ fmin = ftmp;
+ }
+ }
+ return fmax != ~0 ? fmax : fmin;
+}
+
+static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+ int idx = clk->scpi_ops->dvfs_get_idx(clk->id);
+ const struct scpi_opp *opp;
+
+ if (idx < 0)
+ return 0;
+
+ opp = clk->info->opps + idx;
+ return opp->freq;
+}
+
+static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return __scpi_dvfs_round_rate(clk, rate);
+}
+
+static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate)
+{
+ int idx, max_opp = clk->info->count;
+ const struct scpi_opp *opp = clk->info->opps;
+
+ for (idx = 0; idx < max_opp; idx++, opp++)
+ if (opp->freq == rate)
+ return idx;
+ return -EINVAL;
+}
+
+static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+ int ret = __scpi_find_dvfs_index(clk, rate);
+
+ if (ret < 0)
+ return ret;
+ return clk->scpi_ops->dvfs_set_idx(clk->id, (u8)ret);
+}
+
+static const struct clk_ops scpi_dvfs_ops = {
+ .recalc_rate = scpi_dvfs_recalc_rate,
+ .round_rate = scpi_dvfs_round_rate,
+ .set_rate = scpi_dvfs_set_rate,
+};
+
+static const struct of_device_id scpi_clk_match[] = {
+ { .compatible = "arm,scpi-dvfs-clocks", .data = &scpi_dvfs_ops, },
+ { .compatible = "arm,scpi-variable-clocks", .data = &scpi_clk_ops, },
+ {}
+};
+
+static struct clk *
+scpi_clk_ops_init(struct device *dev, const struct of_device_id *match,
+ struct scpi_clk *sclk, const char *name)
+{
+ struct clk_init_data init;
+ struct clk *clk;
+ unsigned long min = 0, max = 0;
+
+ init.name = name;
+ init.flags = CLK_IS_ROOT;
+ init.num_parents = 0;
+ init.ops = match->data;
+ sclk->hw.init = &init;
+ sclk->scpi_ops = get_scpi_ops();
+
+ if (init.ops == &scpi_dvfs_ops) {
+ sclk->info = sclk->scpi_ops->dvfs_get_info(sclk->id);
+ if (IS_ERR(sclk->info))
+ return NULL;
+ } else if (init.ops == &scpi_clk_ops) {
+ if (sclk->scpi_ops->clk_get_range(sclk->id, &min, &max) || !max)
+ return NULL;
+ } else {
+ return NULL;
+ }
+
+ clk = devm_clk_register(dev, &sclk->hw);
+ if (!IS_ERR(clk) && max)
+ clk_hw_set_rate_range(&sclk->hw, min, max);
+ return clk;
+}
+
+struct scpi_clk_data {
+ struct scpi_clk **clk;
+ unsigned int clk_num;
+};
+
+static struct clk *
+scpi_of_clk_src_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct scpi_clk *sclk;
+ struct scpi_clk_data *clk_data = data;
+ unsigned int idx = clkspec->args[0], count;
+
+ for (count = 0; count < clk_data->clk_num; count++) {
+ sclk = clk_data->clk[count];
+ if (idx == sclk->id)
+ return sclk->hw.clk;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int scpi_clk_add(struct device *dev, struct device_node *np,
+ const struct of_device_id *match)
+{
+ struct clk **clks;
+ int idx, count;
+ struct scpi_clk_data *clk_data;
+
+ count = of_property_count_strings(np, "clock-output-names");
+ if (count < 0) {
+ dev_err(dev, "%s: invalid clock output count\n", np->name);
+ return -EINVAL;
+ }
+
+ clk_data = devm_kmalloc(dev, sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->clk_num = count;
+ clk_data->clk = devm_kcalloc(dev, count, sizeof(*clk_data->clk),
+ GFP_KERNEL);
+ if (!clk_data->clk)
+ return -ENOMEM;
+
+ clks = devm_kcalloc(dev, count, sizeof(*clks), GFP_KERNEL);
+ if (!clks)
+ return -ENOMEM;
+
+ for (idx = 0; idx < count; idx++) {
+ struct scpi_clk *sclk;
+ const char *name;
+ u32 val;
+
+ sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL);
+ if (!sclk)
+ return -ENOMEM;
+
+ if (of_property_read_string_index(np, "clock-output-names",
+ idx, &name)) {
+ dev_err(dev, "invalid clock name @ %s\n", np->name);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_index(np, "clock-indices",
+ idx, &val)) {
+ dev_err(dev, "invalid clock index @ %s\n", np->name);
+ return -EINVAL;
+ }
+
+ sclk->id = val;
+
+ clks[idx] = scpi_clk_ops_init(dev, match, sclk, name);
+ if (IS_ERR_OR_NULL(clks[idx]))
+ dev_err(dev, "failed to register clock '%s'\n", name);
+ else
+ dev_dbg(dev, "Registered clock '%s'\n", name);
+ clk_data->clk[idx] = sclk;
+ }
+
+ return of_clk_add_provider(np, scpi_of_clk_src_get, clk_data);
+}
+
+static int scpi_clocks_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+
+ if (cpufreq_dev) {
+ platform_device_unregister(cpufreq_dev);
+ cpufreq_dev = NULL;
+ }
+
+ for_each_available_child_of_node(np, child)
+ of_clk_del_provider(np);
+ return 0;
+}
+
+static int scpi_clocks_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+ const struct of_device_id *match;
+
+ if (!get_scpi_ops())
+ return -ENXIO;
+
+ for_each_available_child_of_node(np, child) {
+ match = of_match_node(scpi_clk_match, child);
+ if (!match)
+ continue;
+ ret = scpi_clk_add(dev, child, match);
+ if (ret) {
+ scpi_clocks_remove(pdev);
+ return ret;
+ }
+ }
+ /* Add the virtual cpufreq device */
+ cpufreq_dev = platform_device_register_simple("scpi-cpufreq",
+ -1, NULL, 0);
+ if (!cpufreq_dev)
+ pr_warn("unable to register cpufreq device");
+
+ return 0;
+}
+
+static const struct of_device_id scpi_clocks_ids[] = {
+ { .compatible = "arm,scpi-clocks", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, scpi_clocks_ids);
+
+static struct platform_driver scpi_clocks_driver = {
+ .driver = {
+ .name = "scpi_clocks",
+ .of_match_table = scpi_clocks_ids,
+ },
+ .probe = scpi_clocks_probe,
+ .remove = scpi_clocks_remove,
+};
+module_platform_driver(scpi_clocks_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI clock driver");
+MODULE_LICENSE("GPL v2");