Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer core updates from Thomas Gleixner:
 "The timer changes contain:

   - posix timer code consolidation and fixes for odd corner cases

   - sched_clock implementation moved from ARM to core code to avoid
     duplication by other architectures

   - alarm timer updates

   - clocksource and clockevents unregistration facilities

   - clocksource/events support for new hardware

   - precise nanoseconds RTC readout (Xen feature)

   - generic support for Xen suspend/resume oddities

   - the usual lot of fixes and cleanups all over the place

  The parts which touch other areas (ARM/XEN) have been coordinated with
  the relevant maintainers.  Though this results in an handful of
  trivial to solve merge conflicts, which we preferred over nasty cross
  tree merge dependencies.

  The patches which have been committed in the last few days are bug
  fixes plus the posix timer lot.  The latter was in akpms queue and
  next for quite some time; they just got forgotten and Frederic
  collected them last minute."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (59 commits)
  hrtimer: Remove unused variable
  hrtimers: Move SMP function call to thread context
  clocksource: Reselect clocksource when watchdog validated high-res capability
  posix-cpu-timers: don't account cpu timer after stopped thread runtime accounting
  posix_timers: fix racy timer delta caching on task exit
  posix-timers: correctly get dying task time sample in posix_cpu_timer_schedule()
  selftests: add basic posix timers selftests
  posix_cpu_timers: consolidate expired timers check
  posix_cpu_timers: consolidate timer list cleanups
  posix_cpu_timer: consolidate expiry time type
  tick: Sanitize broadcast control logic
  tick: Prevent uncontrolled switch to oneshot mode
  tick: Make oneshot broadcast robust vs. CPU offlining
  x86: xen: Sync the CMOS RTC as well as the Xen wallclock
  x86: xen: Sync the wallclock when the system time is set
  timekeeping: Indicate that clock was set in the pvclock gtod notifier
  timekeeping: Pass flags instead of multiple bools to timekeeping_update()
  xen: Remove clock_was_set() call in the resume path
  hrtimers: Support resuming with two or more CPUs online (but stopped)
  timer: Fix jiffies wrap behavior of round_jiffies_common()
  ...

1 files changed, 194 insertions, 0 deletions

diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
new file mode 100644
index 000000000000..587e0202a70b
--- /dev/null
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+/*
+ * Each pit takes 0x10 Bytes register space
+ */
+#define PITMCR		0x00
+#define PIT0_OFFSET	0x100
+#define PITn_OFFSET(n)	(PIT0_OFFSET + 0x10 * (n))
+#define PITLDVAL	0x00
+#define PITCVAL		0x04
+#define PITTCTRL	0x08
+#define PITTFLG		0x0c
+
+#define PITMCR_MDIS	(0x1 << 1)
+
+#define PITTCTRL_TEN	(0x1 << 0)
+#define PITTCTRL_TIE	(0x1 << 1)
+#define PITCTRL_CHN	(0x1 << 2)
+
+#define PITTFLG_TIF	0x1
+
+static void __iomem *clksrc_base;
+static void __iomem *clkevt_base;
+static unsigned long cycle_per_jiffy;
+
+static inline void pit_timer_enable(void)
+{
+	__raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_timer_disable(void)
+{
+	__raw_writel(0, clkevt_base + PITTCTRL);
+}
+
+static inline void pit_irq_acknowledge(void)
+{
+	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+}
+
+static unsigned int pit_read_sched_clock(void)
+{
+	return __raw_readl(clksrc_base + PITCVAL);
+}
+
+static int __init pit_clocksource_init(unsigned long rate)
+{
+	/* set the max load value and start the clock source counter */
+	__raw_writel(0, clksrc_base + PITTCTRL);
+	__raw_writel(~0UL, clksrc_base + PITLDVAL);
+	__raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
+
+	setup_sched_clock(pit_read_sched_clock, 32, rate);
+	return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
+			300, 32, clocksource_mmio_readl_down);
+}
+
+static int pit_set_next_event(unsigned long delta,
+				struct clock_event_device *unused)
+{
+	/*
+	 * set a new value to PITLDVAL register will not restart the timer,
+	 * to abort the current cycle and start a timer period with the new
+	 * value, the timer must be disabled and enabled again.
+	 * and the PITLAVAL should be set to delta minus one according to pit
+	 * hardware requirement.
+	 */
+	pit_timer_disable();
+	__raw_writel(delta - 1, clkevt_base + PITLDVAL);
+	pit_timer_enable();
+
+	return 0;
+}
+
+static void pit_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		pit_set_next_event(cycle_per_jiffy, evt);
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	pit_irq_acknowledge();
+
+	/*
+	 * pit hardware doesn't support oneshot, it will generate an interrupt
+	 * and reload the counter value from PITLDVAL when PITCVAL reach zero,
+	 * and start the counter again. So software need to disable the timer
+	 * to stop the counter loop in ONESHOT mode.
+	 */
+	if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT))
+		pit_timer_disable();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device clockevent_pit = {
+	.name		= "VF pit timer",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= pit_set_mode,
+	.set_next_event	= pit_set_next_event,
+	.rating		= 300,
+};
+
+static struct irqaction pit_timer_irq = {
+	.name		= "VF pit timer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= pit_timer_interrupt,
+	.dev_id		= &clockevent_pit,
+};
+
+static int __init pit_clockevent_init(unsigned long rate, int irq)
+{
+	__raw_writel(0, clkevt_base + PITTCTRL);
+	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
+
+	BUG_ON(setup_irq(irq, &pit_timer_irq));
+
+	clockevent_pit.cpumask = cpumask_of(0);
+	clockevent_pit.irq = irq;
+	/*
+	 * The value for the LDVAL register trigger is calculated as:
+	 * LDVAL trigger = (period / clock period) - 1
+	 * The pit is a 32-bit down count timer, when the conter value
+	 * reaches 0, it will generate an interrupt, thus the minimal
+	 * LDVAL trigger value is 1. And then the min_delta is
+	 * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit.
+	 */
+	clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff);
+
+	return 0;
+}
+
+static void __init pit_timer_init(struct device_node *np)
+{
+	struct clk *pit_clk;
+	void __iomem *timer_base;
+	unsigned long clk_rate;
+	int irq;
+
+	timer_base = of_iomap(np, 0);
+	BUG_ON(!timer_base);
+
+	/*
+	 * PIT0 and PIT1 can be chained to build a 64-bit timer,
+	 * so choose PIT2 as clocksource, PIT3 as clockevent device,
+	 * and leave PIT0 and PIT1 unused for anyone else who needs them.
+	 */
+	clksrc_base = timer_base + PITn_OFFSET(2);
+	clkevt_base = timer_base + PITn_OFFSET(3);
+
+	irq = irq_of_parse_and_map(np, 0);
+	BUG_ON(irq <= 0);
+
+	pit_clk = of_clk_get(np, 0);
+	BUG_ON(IS_ERR(pit_clk));
+
+	BUG_ON(clk_prepare_enable(pit_clk));
+
+	clk_rate = clk_get_rate(pit_clk);
+	cycle_per_jiffy = clk_rate / (HZ);
+
+	/* enable the pit module */
+	__raw_writel(~PITMCR_MDIS, timer_base + PITMCR);
+
+	BUG_ON(pit_clocksource_init(clk_rate));
+
+	pit_clockevent_init(clk_rate, irq);
+}
+CLOCKSOURCE_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init);