diff options
| author | Ian Abbott <abbotti@mev.co.uk> | 2023-09-13 18:07:09 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2023-10-05 13:34:04 +0200 |
| commit | 772dcada0e733a567ad90cca7165c5fef2a1171c (patch) | |
| tree | 8f16624b1b7a5b20eecb1ebc722506790cdf6789 /drivers/comedi | |
| parent | 4e1bd6724b854808aa3b94f17f5c27da59a34ff4 (diff) | |
comedi: amplc_dio200_pci: Conditionally remove devices that use port I/O
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_pci module supports various Amplicon PCI and PCI
Express devices. Some of the supported devices (the PCI ones) use port
I/O, and some of them (the PCIe ones) only use memory-mapped I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined.
Add a run-time check in `dio200_pci_auto_attach()` to return an error if
the device actually requires port I/O (based on the PCI BAR resource
flags) but the `HAS_IOPORT` configuration option is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-11-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/comedi')
| -rw-r--r-- | drivers/comedi/drivers/amplc_dio200_pci.c | 12 |
1 files changed, 11 insertions, 1 deletions
diff --git a/drivers/comedi/drivers/amplc_dio200_pci.c b/drivers/comedi/drivers/amplc_dio200_pci.c index 527994d82a1f..cb5b328a28e3 100644 --- a/drivers/comedi/drivers/amplc_dio200_pci.c +++ b/drivers/comedi/drivers/amplc_dio200_pci.c @@ -223,14 +223,17 @@ */ enum dio200_pci_model { +#ifdef CONFIG_HAS_IOPORT pci215_model, pci272_model, +#endif /* CONFIG_HAS_IOPORT */ pcie215_model, pcie236_model, pcie296_model }; static const struct dio200_board dio200_pci_boards[] = { +#ifdef CONFIG_HAS_IOPORT [pci215_model] = { .name = "pci215", .mainbar = 2, @@ -252,6 +255,7 @@ static const struct dio200_board dio200_pci_boards[] = { .sdinfo = { 0x00, 0x08, 0x10, 0x3f }, .has_int_sce = true, }, +#endif /* CONFIG_HAS_IOPORT */ [pcie215_model] = { .name = "pcie215", .mainbar = 1, @@ -364,8 +368,12 @@ static int dio200_pci_auto_attach(struct comedi_device *dev, "error! cannot remap registers\n"); return -ENOMEM; } - } else { + } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) { dev->iobase = pci_resource_start(pci_dev, bar); + } else { + dev_err(dev->class_dev, + "error! need I/O port support\n"); + return -ENXIO; } if (board->is_pcie) { @@ -385,8 +393,10 @@ static struct comedi_driver dio200_pci_comedi_driver = { }; static const struct pci_device_id dio200_pci_table[] = { +#ifdef CONFIG_HAS_IOPORT { PCI_VDEVICE(AMPLICON, 0x000b), pci215_model }, { PCI_VDEVICE(AMPLICON, 0x000a), pci272_model }, +#endif /* CONFIG_HAS_IOPORT */ { PCI_VDEVICE(AMPLICON, 0x0011), pcie236_model }, { PCI_VDEVICE(AMPLICON, 0x0012), pcie215_model }, { PCI_VDEVICE(AMPLICON, 0x0014), pcie296_model }, |