summaryrefslogtreecommitdiff
path: root/drivers/cpufreq/kirkwood-cpufreq.c
diff options
context:
space:
mode:
authorViresh Kumar <viresh.kumar@linaro.org>2013-08-14 19:38:24 +0530
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>2013-10-31 00:11:08 +0100
commitd4019f0a92ab802f385cc9c8ad3ab7b5449712cb (patch)
treeebd06695585e457ae1bf219653452b111e7508db /drivers/cpufreq/kirkwood-cpufreq.c
parent7dbf694db6ac7c759599316d50d7050efcbd512a (diff)
cpufreq: move freq change notifications to cpufreq core
Most of the drivers do following in their ->target_index() routines: struct cpufreq_freqs freqs; freqs.old = old freq... freqs.new = new freq... cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); /* Change rate here */ cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); This is replicated over all cpufreq drivers today and there doesn't exists a good enough reason why this shouldn't be moved to cpufreq core instead. There are few special cases though, like exynos5440, which doesn't do everything on the call to ->target_index() routine and call some kind of bottom halves for doing this work, work/tasklet/etc.. They may continue doing notification from their own code as flag: CPUFREQ_ASYNC_NOTIFICATION is already set for them. All drivers are also modified in this patch to avoid breaking 'git bisect', as double notification would happen otherwise. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/cpufreq/kirkwood-cpufreq.c')
-rw-r--r--drivers/cpufreq/kirkwood-cpufreq.c54
1 files changed, 20 insertions, 34 deletions
diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c
index 0ae4dd7e1f2d..0767a4e29dfe 100644
--- a/drivers/cpufreq/kirkwood-cpufreq.c
+++ b/drivers/cpufreq/kirkwood-cpufreq.c
@@ -58,48 +58,34 @@ static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu)
static int kirkwood_cpufreq_target(struct cpufreq_policy *policy,
unsigned int index)
{
- struct cpufreq_freqs freqs;
unsigned int state = kirkwood_freq_table[index].driver_data;
unsigned long reg;
- freqs.old = kirkwood_cpufreq_get_cpu_frequency(0);
- freqs.new = kirkwood_freq_table[index].frequency;
+ local_irq_disable();
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ /* Disable interrupts to the CPU */
+ reg = readl_relaxed(priv.base);
+ reg |= CPU_SW_INT_BLK;
+ writel_relaxed(reg, priv.base);
- dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n",
- kirkwood_freq_table[index].frequency);
- dev_dbg(priv.dev, "old frequency was %i KHz\n",
- kirkwood_cpufreq_get_cpu_frequency(0));
-
- if (freqs.old != freqs.new) {
- local_irq_disable();
-
- /* Disable interrupts to the CPU */
- reg = readl_relaxed(priv.base);
- reg |= CPU_SW_INT_BLK;
- writel_relaxed(reg, priv.base);
-
- switch (state) {
- case STATE_CPU_FREQ:
- clk_disable(priv.powersave_clk);
- break;
- case STATE_DDR_FREQ:
- clk_enable(priv.powersave_clk);
- break;
- }
+ switch (state) {
+ case STATE_CPU_FREQ:
+ clk_disable(priv.powersave_clk);
+ break;
+ case STATE_DDR_FREQ:
+ clk_enable(priv.powersave_clk);
+ break;
+ }
- /* Wait-for-Interrupt, while the hardware changes frequency */
- cpu_do_idle();
+ /* Wait-for-Interrupt, while the hardware changes frequency */
+ cpu_do_idle();
- /* Enable interrupts to the CPU */
- reg = readl_relaxed(priv.base);
- reg &= ~CPU_SW_INT_BLK;
- writel_relaxed(reg, priv.base);
+ /* Enable interrupts to the CPU */
+ reg = readl_relaxed(priv.base);
+ reg &= ~CPU_SW_INT_BLK;
+ writel_relaxed(reg, priv.base);
- local_irq_enable();
- }
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+ local_irq_enable();
return 0;
}