crypto: hisilicon/qm - fix PF queue parameter issue

If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.

After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.

Fixes: 8bbecfb402f7 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

5 files changed, 27 insertions, 7 deletions

diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index db44d889438a..3dce35debf63 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -433,8 +433,11 @@ static u32 uacce_mode = UACCE_MODE_NOUACCE;
 module_param_cb(uacce_mode, &hpre_uacce_mode_ops, &uacce_mode, 0444);
 MODULE_PARM_DESC(uacce_mode, UACCE_MODE_DESC);
 
+static bool pf_q_num_flag;
 static int pf_q_num_set(const char *val, const struct kernel_param *kp)
 {
+	pf_q_num_flag = true;
+
 	return q_num_set(val, kp, PCI_DEVICE_ID_HUAWEI_HPRE_PF);
 }
 
@@ -1157,6 +1160,8 @@ static int hpre_qm_init(struct hisi_qm *qm, struct pci_dev *pdev)
 		qm->qp_num = pf_q_num;
 		qm->debug.curr_qm_qp_num = pf_q_num;
 		qm->qm_list = &hpre_devices;
+		if (pf_q_num_flag)
+			set_bit(QM_MODULE_PARAM, &qm->misc_ctl);
 	}
 
 	ret = hisi_qm_init(qm);
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index a99fd589445c..1638c0a7df31 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -206,8 +206,6 @@
 #define WAIT_PERIOD			20
 #define REMOVE_WAIT_DELAY		10
 
-#define QM_DRIVER_REMOVING		0
-#define QM_RST_SCHED			1
 #define QM_QOS_PARAM_NUM		2
 #define QM_QOS_MAX_VAL			1000
 #define QM_QOS_RATE			100
@@ -2824,7 +2822,6 @@ static void hisi_qm_pre_init(struct hisi_qm *qm)
 	mutex_init(&qm->mailbox_lock);
 	init_rwsem(&qm->qps_lock);
 	qm->qp_in_used = 0;
-	qm->misc_ctl = false;
 	if (test_bit(QM_SUPPORT_RPM, &qm->caps)) {
 		if (!acpi_device_power_manageable(ACPI_COMPANION(&pdev->dev)))
 			dev_info(&pdev->dev, "_PS0 and _PR0 are not defined");
@@ -5093,6 +5090,7 @@ free_eq_irq:
 
 static int qm_get_qp_num(struct hisi_qm *qm)
 {
+	struct device *dev = &qm->pdev->dev;
 	bool is_db_isolation;
 
 	/* VF's qp_num assigned by PF in v2, and VF can get qp_num by vft. */
@@ -5109,13 +5107,21 @@ static int qm_get_qp_num(struct hisi_qm *qm)
 	qm->max_qp_num = hisi_qm_get_hw_info(qm, qm_basic_info,
 					     QM_FUNC_MAX_QP_CAP, is_db_isolation);
 
-	/* check if qp number is valid */
-	if (qm->qp_num > qm->max_qp_num) {
-		dev_err(&qm->pdev->dev, "qp num(%u) is more than max qp num(%u)!\n",
+	if (qm->qp_num <= qm->max_qp_num)
+		return 0;
+
+	if (test_bit(QM_MODULE_PARAM, &qm->misc_ctl)) {
+		/* Check whether the set qp number is valid */
+		dev_err(dev, "qp num(%u) is more than max qp num(%u)!\n",
 			qm->qp_num, qm->max_qp_num);
 		return -EINVAL;
 	}
 
+	dev_info(dev, "Default qp num(%u) is too big, reset it to Function's max qp num(%u)!\n",
+		 qm->qp_num, qm->max_qp_num);
+	qm->qp_num = qm->max_qp_num;
+	qm->debug.curr_qm_qp_num = qm->qp_num;
+
 	return 0;
 }
 
diff --git a/drivers/crypto/hisilicon/qm_common.h b/drivers/crypto/hisilicon/qm_common.h
index 1406a422d455..8e36aa9c681b 100644
--- a/drivers/crypto/hisilicon/qm_common.h
+++ b/drivers/crypto/hisilicon/qm_common.h
@@ -4,7 +4,6 @@
 #define QM_COMMON_H
 
 #define QM_DBG_READ_LEN		256
-#define QM_RESETTING		2
 
 struct qm_cqe {
 	__le32 rsvd0;
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 77f9f131b850..62bd8936a915 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -311,8 +311,11 @@ static int sec_diff_regs_show(struct seq_file *s, void *unused)
 }
 DEFINE_SHOW_ATTRIBUTE(sec_diff_regs);
 
+static bool pf_q_num_flag;
 static int sec_pf_q_num_set(const char *val, const struct kernel_param *kp)
 {
+	pf_q_num_flag = true;
+
 	return q_num_set(val, kp, PCI_DEVICE_ID_HUAWEI_SEC_PF);
 }
 
@@ -1120,6 +1123,8 @@ static int sec_qm_init(struct hisi_qm *qm, struct pci_dev *pdev)
 		qm->qp_num = pf_q_num;
 		qm->debug.curr_qm_qp_num = pf_q_num;
 		qm->qm_list = &sec_devices;
+		if (pf_q_num_flag)
+			set_bit(QM_MODULE_PARAM, &qm->misc_ctl);
 	} else if (qm->fun_type == QM_HW_VF && qm->ver == QM_HW_V1) {
 		/*
 		 * have no way to get qm configure in VM in v1 hardware,
diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index 0d5d1ee363e4..945ab3648a87 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -364,8 +364,11 @@ static u32 uacce_mode = UACCE_MODE_NOUACCE;
 module_param_cb(uacce_mode, &zip_uacce_mode_ops, &uacce_mode, 0444);
 MODULE_PARM_DESC(uacce_mode, UACCE_MODE_DESC);
 
+static bool pf_q_num_flag;
 static int pf_q_num_set(const char *val, const struct kernel_param *kp)
 {
+	pf_q_num_flag = true;
+
 	return q_num_set(val, kp, PCI_DEVICE_ID_HUAWEI_ZIP_PF);
 }
 
@@ -1139,6 +1142,8 @@ static int hisi_zip_qm_init(struct hisi_qm *qm, struct pci_dev *pdev)
 		qm->qp_num = pf_q_num;
 		qm->debug.curr_qm_qp_num = pf_q_num;
 		qm->qm_list = &zip_devices;
+		if (pf_q_num_flag)
+			set_bit(QM_MODULE_PARAM, &qm->misc_ctl);
 	} else if (qm->fun_type == QM_HW_VF && qm->ver == QM_HW_V1) {
 		/*
 		 * have no way to get qm configure in VM in v1 hardware,