Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Rework portdrv shutdown so it disables interrupts but doesn't
     disable bus mastering, which leads to hangs on Loongson LS7A

   - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
     again to avoid hardware issues on Loongson LS7A (and likely other
     devices based on DesignWare IP)

   - Ignore devices with a firmware (DT or ACPI) node that says the
     device is disabled

  Resource management:

   - Distribute spare resources to unconfigured hotplug bridges at
     boot-time (not just when hot-adding such a bridge), which makes
     hot-adding devices to docks work better. Tried this in v6.1 but had
     to revert for regressions, so try again

   - Fix root bus issue that dropped resources that happened to end
     at 0, e.g., [bus 00]

  PCI device hotplug:

   - Remove device locking when marking device as disconnected so this
     doesn't have to wait for concurrent driver bind/unbind to complete

   - Quirk more Qualcomm bridges that don't fully implement the PCIe
     Slot Status 'Command Completed' bit

  Power management:

   - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
     don't miss hot-add notifications for USB4 docks, Thunderbolt, etc

  Reset:

   - Observe delay after reset, e.g., resuming from system sleep,
     regardless of whether a bridge can suspend to D3cold at runtime

   - Wait for secondary bus to become ready after a bridge reset

  Virtualization:

   - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work

   - Allow independent IOMMU groups for some Wangxun NICs that prevent
     peer-to-peer transactions but don't advertise an ACS Capability

  Error handling:

   - Configure End-to-End-CRC (ECRC) only if Linux owns the AER
     Capability

   - Remove redundant Device Control Error Reporting Enable in the AER
     service driver since this is already done for all devices during
     enumeration

  ASPM:

   - Add pci_enable_link_state() interface to allow drivers to enable
     ASPM link state

  Endpoint framework:

   - Move dra7xx and tegra194 linkup processing from hard IRQ to
     threaded IRQ handler

   - Add a separate lock for endpoint controller list of endpoint
     function drivers to prevent deadlock in callbacks

   - Pass events from endpoint controller to endpoint function drivers
     via callbacks instead of notifiers

  Synopsys DesignWare eDMA controller driver (acked by Vinod):

   - Fix CPU vs PCI address issues

   - Fix source vs destination address issues

   - Fix issues with interleaved transfer semantics

   - Fix channel count initialization issue (issue still exists in
     several other drivers)

   - Clean up and improve debugfs usage so it will work on platforms
     with several eDMA devices

  Baikal T-1 PCIe controller driver:

   - Set a 64-bit DMA mask

  Freescale i.MX6 PCIe controller driver:

   - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
     support

  Intel VMD host bridge driver:

   - Add quirk to configure PCIe ASPM and LTR. This is normally done by
     BIOS, and will be for future products

  Marvell MVEBU PCIe controller driver:

   - Mark this driver as broken in Kconfig since bugs prevent its daily
     usage

  MediaTek MT7621 PCIe controller driver:

   - Delay PHY port initialization to improve boot reliability for ZBT
     WE1326, ZBT WF3526-P, and some Netgear models

  Qualcomm PCIe controller driver:

   - Add MSM8998 DT compatible string

   - Unify MSM8996 and MSM8998 clock orderings

   - Add SM8350 DT binding and driver support

   - Add IPQ8074 Gen3 DT binding and driver support

   - Correct qcom,perst-regs in DT binding

   - Add qcom_pcie_host_deinit() so the PHY is powered off and
     regulators and clocks are disabled on late host-init errors

  Socionext UniPhier Pro5 controller driver:

   - Clean up uniphier-ep reg, clocks, resets, and their names in DT
     binding

  Synopsys DesignWare PCIe controller driver:

   - Restrict coherent DMA mask to 32 bits for MSI, but allow controller
     drivers to set 64-bit streaming DMA mask

   - Add eDMA engine support in both Root Port and Endpoint controllers

  Miscellaneous:

   - Remove MODULE_LICENSE from boolean drivers so they don't look like
     modules so modprobe can complain about them"

* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
  PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
  PCI: bt1: Set 64-bit DMA mask
  PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
  dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
  dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
  dmaengine: dw-edma: Add mem-mapped LL-entries support
  PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
  PCI: hv: Drop duplicate PCI_MSI dependency
  PCI/P2PDMA: Annotate RCU dereference
  PCI/sysfs: Constify struct kobj_type pci_slot_ktype
  PCI: hotplug: Allow marking devices as disconnected during bind/unbind
  PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
  PCI: qcom: Add IPQ8074 Gen3 port support
  dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
  dt-bindings: PCI: qcom: Sort compatibles alphabetically
  PCI: qcom: Fix host-init error handling
  PCI: qcom: Add SM8350 support
  dt-bindings: PCI: qcom: Add SM8350
  dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
  dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
  ...

1 files changed, 47 insertions, 53 deletions

diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
index 77e6cfe52e0a..72e79a0c0a4e 100644
--- a/drivers/dma/dw-edma/dw-edma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
@@ -8,6 +8,8 @@
 
 #include <linux/bitfield.h>
 
+#include <linux/io-64-nonatomic-lo-hi.h>
+
 #include "dw-edma-core.h"
 #include "dw-edma-v0-core.h"
 #include "dw-edma-v0-regs.h"
@@ -53,8 +55,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw)
 		SET_32(dw, rd_##name, value);		\
 	} while (0)
 
-#ifdef CONFIG_64BIT
-
 #define SET_64(dw, name, value)				\
 	writeq(value, &(__dw_regs(dw)->name))
 
@@ -80,8 +80,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw)
 		SET_64(dw, rd_##name, value);		\
 	} while (0)
 
-#endif /* CONFIG_64BIT */
-
 #define SET_COMPAT(dw, name, value)			\
 	writel(value, &(__dw_regs(dw)->type.unroll.name))
 
@@ -161,11 +159,6 @@ static inline u32 readl_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 #define GET_CH_32(dw, dir, ch, name) \
 	readl_ch(dw, dir, ch, &(__dw_ch_regs(dw, dir, ch)->name))
 
-#define SET_LL_32(ll, value) \
-	writel(value, ll)
-
-#ifdef CONFIG_64BIT
-
 static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 			     u64 value, void __iomem *addr)
 {
@@ -192,7 +185,7 @@ static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 			   const void __iomem *addr)
 {
-	u32 value;
+	u64 value;
 
 	if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) {
 		u32 viewport_sel;
@@ -222,11 +215,6 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
 #define GET_CH_64(dw, dir, ch, name) \
 	readq_ch(dw, dir, ch, &(__dw_ch_regs(dw, dir, ch)->name))
 
-#define SET_LL_64(ll, value) \
-	writeq(value, ll)
-
-#endif /* CONFIG_64BIT */
-
 /* eDMA management callbacks */
 void dw_edma_v0_core_off(struct dw_edma *dw)
 {
@@ -298,17 +286,53 @@ u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
 			 GET_RW_32(dw, dir, int_status));
 }
 
+static void dw_edma_v0_write_ll_data(struct dw_edma_chunk *chunk, int i,
+				     u32 control, u32 size, u64 sar, u64 dar)
+{
+	ptrdiff_t ofs = i * sizeof(struct dw_edma_v0_lli);
+
+	if (chunk->chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
+		struct dw_edma_v0_lli *lli = chunk->ll_region.vaddr.mem + ofs;
+
+		lli->control = control;
+		lli->transfer_size = size;
+		lli->sar.reg = sar;
+		lli->dar.reg = dar;
+	} else {
+		struct dw_edma_v0_lli __iomem *lli = chunk->ll_region.vaddr.io + ofs;
+
+		writel(control, &lli->control);
+		writel(size, &lli->transfer_size);
+		writeq(sar, &lli->sar.reg);
+		writeq(dar, &lli->dar.reg);
+	}
+}
+
+static void dw_edma_v0_write_ll_link(struct dw_edma_chunk *chunk,
+				     int i, u32 control, u64 pointer)
+{
+	ptrdiff_t ofs = i * sizeof(struct dw_edma_v0_lli);
+
+	if (chunk->chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
+		struct dw_edma_v0_llp *llp = chunk->ll_region.vaddr.mem + ofs;
+
+		llp->control = control;
+		llp->llp.reg = pointer;
+	} else {
+		struct dw_edma_v0_llp __iomem *llp = chunk->ll_region.vaddr.io + ofs;
+
+		writel(control, &llp->control);
+		writeq(pointer, &llp->llp.reg);
+	}
+}
+
 static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 {
 	struct dw_edma_burst *child;
 	struct dw_edma_chan *chan = chunk->chan;
-	struct dw_edma_v0_lli __iomem *lli;
-	struct dw_edma_v0_llp __iomem *llp;
 	u32 control = 0, i = 0;
 	int j;
 
-	lli = chunk->ll_region.vaddr;
-
 	if (chunk->cb)
 		control = DW_EDMA_V0_CB;
 
@@ -320,41 +344,16 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 			if (!(chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
 				control |= DW_EDMA_V0_RIE;
 		}
-		/* Channel control */
-		SET_LL_32(&lli[i].control, control);
-		/* Transfer size */
-		SET_LL_32(&lli[i].transfer_size, child->sz);
-		/* SAR */
-		#ifdef CONFIG_64BIT
-			SET_LL_64(&lli[i].sar.reg, child->sar);
-		#else /* CONFIG_64BIT */
-			SET_LL_32(&lli[i].sar.lsb, lower_32_bits(child->sar));
-			SET_LL_32(&lli[i].sar.msb, upper_32_bits(child->sar));
-		#endif /* CONFIG_64BIT */
-		/* DAR */
-		#ifdef CONFIG_64BIT
-			SET_LL_64(&lli[i].dar.reg, child->dar);
-		#else /* CONFIG_64BIT */
-			SET_LL_32(&lli[i].dar.lsb, lower_32_bits(child->dar));
-			SET_LL_32(&lli[i].dar.msb, upper_32_bits(child->dar));
-		#endif /* CONFIG_64BIT */
-		i++;
+
+		dw_edma_v0_write_ll_data(chunk, i++, control, child->sz,
+					 child->sar, child->dar);
 	}
 
-	llp = (void __iomem *)&lli[i];
 	control = DW_EDMA_V0_LLP | DW_EDMA_V0_TCB;
 	if (!chunk->cb)
 		control |= DW_EDMA_V0_CB;
 
-	/* Channel control */
-	SET_LL_32(&llp->control, control);
-	/* Linked list */
-	#ifdef CONFIG_64BIT
-		SET_LL_64(&llp->llp.reg, chunk->ll_region.paddr);
-	#else /* CONFIG_64BIT */
-		SET_LL_32(&llp->llp.lsb, lower_32_bits(chunk->ll_region.paddr));
-		SET_LL_32(&llp->llp.msb, upper_32_bits(chunk->ll_region.paddr));
-	#endif /* CONFIG_64BIT */
+	dw_edma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
 }
 
 void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
@@ -504,8 +503,3 @@ void dw_edma_v0_core_debugfs_on(struct dw_edma *dw)
 {
 	dw_edma_v0_debugfs_on(dw);
 }
-
-void dw_edma_v0_core_debugfs_off(struct dw_edma *dw)
-{
-	dw_edma_v0_debugfs_off(dw);
-}