dmaengine: ti: k3-udma-glue: move psi-l pairing in channel en/dis functions

The NAVSS UDMA will stuck if target IP module is disabled by PM while PSI-L
threads are paired UDMA<->IP and no further transfers is possible. This
could be the case for IPs J721E Main CPSW (cpsw9g).

Hence, to avoid such situation do PSI-L threads pairing only when UDMA
channel is going to be enabled as at this time DMA consumer module expected
to be active already.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201030203000.4281-1-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

1 files changed, 38 insertions, 26 deletions

diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index a367584f0d7b..dfb65e382ab9 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -303,19 +303,6 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev,
 		goto err;
 	}
 
-	ret = xudma_navss_psil_pair(tx_chn->common.udmax,
-				    tx_chn->common.src_thread,
-				    tx_chn->common.dst_thread);
-	if (ret) {
-		dev_err(dev, "PSI-L request err %d\n", ret);
-		goto err;
-	}
-
-	tx_chn->psil_paired = true;
-
-	/* reset TX RT registers */
-	k3_udma_glue_disable_tx_chn(tx_chn);
-
 	k3_udma_glue_dump_tx_chn(tx_chn);
 
 	return tx_chn;
@@ -378,6 +365,18 @@ EXPORT_SYMBOL_GPL(k3_udma_glue_pop_tx_chn);
 
 int k3_udma_glue_enable_tx_chn(struct k3_udma_glue_tx_channel *tx_chn)
 {
+	int ret;
+
+	ret = xudma_navss_psil_pair(tx_chn->common.udmax,
+				    tx_chn->common.src_thread,
+				    tx_chn->common.dst_thread);
+	if (ret) {
+		dev_err(tx_chn->common.dev, "PSI-L request err %d\n", ret);
+		return ret;
+	}
+
+	tx_chn->psil_paired = true;
+
 	xudma_tchanrt_write(tx_chn->udma_tchanx, UDMA_CHAN_RT_PEER_RT_EN_REG,
 			    UDMA_PEER_RT_EN_ENABLE);
 
@@ -398,6 +397,13 @@ void k3_udma_glue_disable_tx_chn(struct k3_udma_glue_tx_channel *tx_chn)
 	xudma_tchanrt_write(tx_chn->udma_tchanx,
 			    UDMA_CHAN_RT_PEER_RT_EN_REG, 0);
 	k3_udma_glue_dump_tx_rt_chn(tx_chn, "txchn dis2");
+
+	if (tx_chn->psil_paired) {
+		xudma_navss_psil_unpair(tx_chn->common.udmax,
+					tx_chn->common.src_thread,
+					tx_chn->common.dst_thread);
+		tx_chn->psil_paired = false;
+	}
 }
 EXPORT_SYMBOL_GPL(k3_udma_glue_disable_tx_chn);
 
@@ -815,19 +821,6 @@ k3_udma_glue_request_rx_chn_priv(struct device *dev, const char *name,
 			goto err;
 	}
 
-	ret = xudma_navss_psil_pair(rx_chn->common.udmax,
-				    rx_chn->common.src_thread,
-				    rx_chn->common.dst_thread);
-	if (ret) {
-		dev_err(dev, "PSI-L request err %d\n", ret);
-		goto err;
-	}
-
-	rx_chn->psil_paired = true;
-
-	/* reset RX RT registers */
-	k3_udma_glue_disable_rx_chn(rx_chn);
-
 	k3_udma_glue_dump_rx_chn(rx_chn);
 
 	return rx_chn;
@@ -1052,12 +1045,24 @@ EXPORT_SYMBOL_GPL(k3_udma_glue_rx_flow_disable);
 
 int k3_udma_glue_enable_rx_chn(struct k3_udma_glue_rx_channel *rx_chn)
 {
+	int ret;
+
 	if (rx_chn->remote)
 		return -EINVAL;
 
 	if (rx_chn->flows_ready < rx_chn->flow_num)
 		return -EINVAL;
 
+	ret = xudma_navss_psil_pair(rx_chn->common.udmax,
+				    rx_chn->common.src_thread,
+				    rx_chn->common.dst_thread);
+	if (ret) {
+		dev_err(rx_chn->common.dev, "PSI-L request err %d\n", ret);
+		return ret;
+	}
+
+	rx_chn->psil_paired = true;
+
 	xudma_rchanrt_write(rx_chn->udma_rchanx, UDMA_CHAN_RT_CTL_REG,
 			    UDMA_CHAN_RT_CTL_EN);
 
@@ -1078,6 +1083,13 @@ void k3_udma_glue_disable_rx_chn(struct k3_udma_glue_rx_channel *rx_chn)
 	xudma_rchanrt_write(rx_chn->udma_rchanx, UDMA_CHAN_RT_CTL_REG, 0);
 
 	k3_udma_glue_dump_rx_rt_chn(rx_chn, "rxrt dis2");
+
+	if (rx_chn->psil_paired) {
+		xudma_navss_psil_unpair(rx_chn->common.udmax,
+					rx_chn->common.src_thread,
+					rx_chn->common.dst_thread);
+		rx_chn->psil_paired = false;
+	}
 }
 EXPORT_SYMBOL_GPL(k3_udma_glue_disable_rx_chn);