summaryrefslogtreecommitdiff
path: root/drivers/edac
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2012-10-17 00:39:09 +0200
committerRalf Baechle <ralf@linux-mips.org>2012-12-12 16:48:49 +0100
commitf65aad41772f6a0022e9763fe06f47604449964c (patch)
tree701d6ea74ac0c41f008c5554d876945fe4caf512 /drivers/edac
parentaa1762f49c81a14d0453e4f67f922e4f155510a3 (diff)
MIPS: Cavium: Add EDAC support.
Drivers for EDAC on Cavium. Supported subsystems are: o CPU primary caches. These are parity protected only, so only error reporting. o Second level cache - ECC protected, provides SECDED. o Memory: ECC / SECDEC if used with suitable DRAM modules. The driver will will only initialize if ECC is enabled on a system so is safe to run on non-ECC memory. o PCI: Parity error reporting Since it is very hard to test this sort of code the implementation is very conservative and uses polling where possible for now. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Diffstat (limited to 'drivers/edac')
-rw-r--r--drivers/edac/Kconfig33
-rw-r--r--drivers/edac/Makefile5
-rw-r--r--drivers/edac/octeon_edac-l2c.c118
-rw-r--r--drivers/edac/octeon_edac-lmc.c150
-rw-r--r--drivers/edac/octeon_edac-lmc.h78
-rw-r--r--drivers/edac/octeon_edac-pc.c140
-rw-r--r--drivers/edac/octeon_edac-pci.c135
7 files changed, 658 insertions, 1 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 409b92b8d346..a9db20815a39 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -7,7 +7,7 @@
menuconfig EDAC
bool "EDAC (Error Detection And Correction) reporting"
depends on HAS_IOMEM
- depends on X86 || PPC || TILE || ARM
+ depends on X86 || PPC || TILE || ARM || EDAC_SUPPORT
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
@@ -27,6 +27,9 @@ menuconfig EDAC
There is also a mailing list for the EDAC project, which can
be found via the sourceforge page.
+config EDAC_SUPPORT
+ bool
+
if EDAC
comment "Reporting subsystems"
@@ -316,4 +319,32 @@ config EDAC_HIGHBANK_L2
Support for error detection and correction on the
Calxeda Highbank memory controller.
+config EDAC_OCTEON_PC
+ tristate "Cavium Octeon Primary Caches"
+ depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
+ help
+ Support for error detection and correction on the primary caches of
+ the cnMIPS cores of Cavium Octeon family SOCs.
+
+config EDAC_OCTEON_L2C
+ tristate "Cavium Octeon Secondary Caches (L2C)"
+ depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
+ help
+ Support for error detection and correction on the
+ Cavium Octeon family of SOCs.
+
+config EDAC_OCTEON_LMC
+ tristate "Cavium Octeon DRAM Memory Controller (LMC)"
+ depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON
+ help
+ Support for error detection and correction on the
+ Cavium Octeon family of SOCs.
+
+config EDAC_OCTEON_PCI
+ tristate "Cavium Octeon PCI Controller"
+ depends on EDAC_MM_EDAC && PCI && CPU_CAVIUM_OCTEON
+ help
+ Support for error detection and correction on the
+ Cavium Octeon family of SOCs.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 7e5129a733f8..5608a9ba61b7 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -58,3 +58,8 @@ obj-$(CONFIG_EDAC_TILE) += tile_edac.o
obj-$(CONFIG_EDAC_HIGHBANK_MC) += highbank_mc_edac.o
obj-$(CONFIG_EDAC_HIGHBANK_L2) += highbank_l2_edac.o
+
+obj-$(CONFIG_EDAC_OCTEON_PC) += octeon_edac-pc.o
+obj-$(CONFIG_EDAC_OCTEON_L2C) += octeon_edac-l2c.o
+obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o
+obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o
diff --git a/drivers/edac/octeon_edac-l2c.c b/drivers/edac/octeon_edac-l2c.c
new file mode 100644
index 000000000000..5f459aa451bf
--- /dev/null
+++ b/drivers/edac/octeon_edac-l2c.c
@@ -0,0 +1,118 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+
+#include <asm/octeon/cvmx.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+#define EDAC_MOD_STR "octeon-l2c"
+
+static void co_l2c_poll(struct edac_device_ctl_info *l2c)
+{
+ union cvmx_l2t_err l2t_err;
+
+ l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR);
+ if (l2t_err.s.sec_err) {
+ edac_device_handle_ce(l2c, 0, 0,
+ "Single bit error (corrected)");
+ l2t_err.s.sec_err = 1; /* Reset */
+ cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64);
+ }
+ if (l2t_err.s.ded_err) {
+ edac_device_handle_ue(l2c, 0, 0,
+ "Double bit error (corrected)");
+ l2t_err.s.ded_err = 1; /* Reset */
+ cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64);
+ }
+}
+
+static int __devinit co_l2c_probe(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *l2c;
+ union cvmx_l2t_err l2t_err;
+ int res = 0;
+
+ l2c = edac_device_alloc_ctl_info(0, "l2c", 1, NULL, 0, 0,
+ NULL, 0, edac_device_alloc_index());
+ if (!l2c)
+ return -ENOMEM;
+
+ l2c->dev = &pdev->dev;
+ platform_set_drvdata(pdev, l2c);
+ l2c->dev_name = dev_name(&pdev->dev);
+
+ l2c->mod_name = "octeon-l2c";
+ l2c->ctl_name = "octeon_l2c_err";
+ l2c->edac_check = co_l2c_poll;
+
+ if (edac_device_add_device(l2c) > 0) {
+ pr_err("%s: edac_device_add_device() failed\n", __func__);
+ goto err;
+ }
+
+ l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR);
+ l2t_err.s.sec_intena = 0; /* We poll */
+ l2t_err.s.ded_intena = 0;
+ l2t_err.s.sec_err = 1; /* Clear, just in case */
+ l2t_err.s.ded_err = 1;
+ cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64);
+
+ return 0;
+
+err:
+ edac_device_free_ctl_info(l2c);
+
+ return res;
+}
+
+static int co_l2c_remove(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *l2c = platform_get_drvdata(pdev);
+
+ edac_device_del_device(&pdev->dev);
+ edac_device_free_ctl_info(l2c);
+
+ return 0;
+}
+
+static struct platform_driver co_l2c_driver = {
+ .probe = co_l2c_probe,
+ .remove = co_l2c_remove,
+ .driver = {
+ .name = "co_l2c_edac",
+ }
+};
+
+static int __init co_edac_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&co_l2c_driver);
+ if (ret)
+ pr_warning(EDAC_MOD_STR " EDAC failed to register\n");
+
+ return ret;
+}
+
+static void __exit co_edac_exit(void)
+{
+ platform_driver_unregister(&co_l2c_driver);
+}
+
+module_init(co_edac_init);
+module_exit(co_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
diff --git a/drivers/edac/octeon_edac-lmc.c b/drivers/edac/octeon_edac-lmc.c
new file mode 100644
index 000000000000..e0c1e44187bc
--- /dev/null
+++ b/drivers/edac/octeon_edac-lmc.c
@@ -0,0 +1,150 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+
+#include <asm/octeon/cvmx.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+#include "octeon_edac-lmc.h"
+
+#define EDAC_MOD_STR "octeon"
+
+static struct mem_ctl_info *mc_cavium;
+static void *lmc_base;
+
+static void co_lmc_poll(struct mem_ctl_info *mci)
+{
+ union lmc_mem_cfg0 cfg0;
+ union lmc_fadr fadr;
+ char msg[64];
+
+ fadr.u64 = readq(lmc_base + LMC_FADR);
+ cfg0.u64 = readq(lmc_base + LMC_MEM_CFG0);
+ snprintf(msg, sizeof(msg), "DIMM %d rank %d bank %d row %d col %d",
+ fadr.fdimm, fadr.fbunk, fadr.fbank, fadr.frow, fadr.fcol);
+
+ if (cfg0.sec_err) {
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
+ msg, "");
+
+ cfg0.intr_sec_ena = -1; /* Done, re-arm */
+ }
+
+ if (cfg0.ded_err) {
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
+ msg, "");
+ cfg0.intr_ded_ena = -1; /* Done, re-arm */
+ }
+
+ writeq(cfg0.u64, lmc_base + LMC_MEM_CFG0);
+}
+
+static int __devinit co_lmc_probe(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci;
+ union lmc_mem_cfg0 cfg0;
+ int res = 0;
+
+ mci = edac_mc_alloc(0, 0, 0, 0);
+ if (!mci)
+ return -ENOMEM;
+
+ mci->pdev = &pdev->dev;
+ platform_set_drvdata(pdev, mci);
+ mci->dev_name = dev_name(&pdev->dev);
+
+ mci->mod_name = "octeon-lmc";
+ mci->ctl_name = "co_lmc_err";
+ mci->edac_check = co_lmc_poll;
+
+ if (edac_mc_add_mc(mci) > 0) {
+ pr_err("%s: edac_mc_add_mc() failed\n", __func__);
+ goto err;
+ }
+
+ cfg0.u64 = readq(lmc_base + LMC_MEM_CFG0); /* We poll */
+ cfg0.intr_ded_ena = 0;
+ cfg0.intr_sec_ena = 0;
+ writeq(cfg0.u64, lmc_base + LMC_MEM_CFG0);
+
+ mc_cavium = mci;
+
+ return 0;
+
+err:
+ edac_mc_free(mci);
+
+ return res;
+}
+
+static int co_lmc_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ mc_cavium = NULL;
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+static struct platform_driver co_lmc_driver = {
+ .probe = co_lmc_probe,
+ .remove = co_lmc_remove,
+ .driver = {
+ .name = "co_lmc_edac",
+ }
+};
+
+static int __init co_edac_init(void)
+{
+ union lmc_mem_cfg0 cfg0;
+ int ret;
+
+ lmc_base = ioremap_nocache(LMC_BASE, LMC_SIZE);
+ if (!lmc_base)
+ return -ENOMEM;
+
+ cfg0.u64 = readq(lmc_base + LMC_MEM_CFG0);
+ if (!cfg0.ecc_ena) {
+ pr_info(EDAC_MOD_STR " LMC EDAC: ECC disabled, good bye\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ ret = platform_driver_register(&co_lmc_driver);
+ if (ret) {
+ pr_warning(EDAC_MOD_STR " LMC EDAC failed to register\n");
+ goto out;
+ }
+
+ return ret;
+
+out:
+ iounmap(lmc_base);
+
+ return ret;
+}
+
+static void __exit co_edac_exit(void)
+{
+ platform_driver_unregister(&co_lmc_driver);
+ iounmap(lmc_base);
+}
+
+module_init(co_edac_init);
+module_exit(co_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
diff --git a/drivers/edac/octeon_edac-lmc.h b/drivers/edac/octeon_edac-lmc.h
new file mode 100644
index 000000000000..246dc525bc10
--- /dev/null
+++ b/drivers/edac/octeon_edac-lmc.h
@@ -0,0 +1,78 @@
+/*
+ * LMC Registers, see chapter 2.5
+ *
+ * These are RSL Type registers and are accessed indirectly across the
+ * I/O bus, so accesses are slowish. Not that it matters. Any size load is
+ * ok but stores must be 64-bit.
+ */
+#define LMC_BASE 0x0001180088000000
+#define LMC_SIZE 0xb8
+
+#define LMC_MEM_CFG0 0x0000000000000000
+#define LMC_MEM_CFG1 0x0000000000000008
+#define LMC_CTL 0x0000000000000010
+#define LMC_DDR2_CTL 0x0000000000000018
+#define LMC_FADR 0x0000000000000020
+#define LMC_FADR_FDIMM
+#define LMC_FADR_FBUNK
+#define LMC_FADR_FBANK
+#define LMC_FADR_FROW
+#define LMC_FADR_FCOL
+#define LMC_COMP_CTL 0x0000000000000028
+#define LMC_WODT_CTL 0x0000000000000030
+#define LMC_ECC_SYND 0x0000000000000038
+#define LMC_IFB_CNT_LO 0x0000000000000048
+#define LMC_IFB_CNT_HI 0x0000000000000050
+#define LMC_OPS_CNT_LO 0x0000000000000058
+#define LMC_OPS_CNT_HI 0x0000000000000060
+#define LMC_DCLK_CNT_LO 0x0000000000000068
+#define LMC_DCLK_CNT_HI 0x0000000000000070
+#define LMC_DELAY_CFG 0x0000000000000088
+#define LMC_CTL1 0x0000000000000090
+#define LMC_DUAL_MEM_CONFIG 0x0000000000000098
+#define LMC_RODT_COMP_CTL 0x00000000000000A0
+#define LMC_PLL_CTL 0x00000000000000A8
+#define LMC_PLL_STATUS 0x00000000000000B0
+
+union lmc_mem_cfg0 {
+ uint64_t u64;
+ struct {
+ uint64_t reserved_32_63:32;
+ uint64_t reset:1;
+ uint64_t silo_qc:1;
+ uint64_t bunk_ena:1;
+ uint64_t ded_err:4;
+ uint64_t sec_err:4;
+ uint64_t intr_ded_ena:1;
+ uint64_t intr_sec_ena:1;
+ uint64_t reserved_15_18:4;
+ uint64_t ref_int:5;
+ uint64_t pbank_lsb:4;
+ uint64_t row_lsb:3;
+ uint64_t ecc_ena:1;
+ uint64_t init_start:1;
+ };
+};
+
+union lmc_fadr {
+ uint64_t u64;
+ struct {
+ uint64_t reserved_32_63:32;
+ uint64_t fdimm:2;
+ uint64_t fbunk:1;
+ uint64_t fbank:3;
+ uint64_t frow:14;
+ uint64_t fcol:12;
+ };
+};
+
+union lmc_ecc_synd {
+ uint64_t u64;
+ struct {
+ uint64_t reserved_32_63:32;
+ uint64_t mrdsyn3:8;
+ uint64_t mrdsyn2:8;
+ uint64_t mrdsyn1:8;
+ uint64_t mrdsyn0:8;
+ };
+};
diff --git a/drivers/edac/octeon_edac-pc.c b/drivers/edac/octeon_edac-pc.c
new file mode 100644
index 000000000000..9d13061744e4
--- /dev/null
+++ b/drivers/edac/octeon_edac-pc.c
@@ -0,0 +1,140 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+#include <asm/octeon/cvmx.h>
+#include <asm/mipsregs.h>
+
+#define EDAC_MOD_STR "octeon"
+
+extern int register_co_cache_error_notifier(struct notifier_block *nb);
+extern int unregister_co_cache_error_notifier(struct notifier_block *nb);
+
+extern unsigned long long cache_err_dcache[NR_CPUS];
+
+static struct edac_device_ctl_info *ed_cavium;
+
+/*
+ * EDAC CPU cache error callback
+ *
+ */
+
+static int co_cache_error_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ unsigned int core = cvmx_get_core_num();
+ unsigned int cpu = smp_processor_id();
+ uint64_t icache_err = read_octeon_c0_icacheerr();
+ struct edac_device_ctl_info *ed = ed_cavium;
+
+ edac_device_printk(ed, KERN_ERR,
+ "Cache error exception on core %d / processor %d:\n",
+ core, cpu);
+ edac_device_printk(ed, KERN_ERR,
+ "cp0_errorepc == %lx\n", read_c0_errorepc());
+ if (icache_err & 1) {
+ edac_device_printk(ed, KERN_ERR, "CacheErr (Icache) == %llx\n",
+ (unsigned long long)icache_err);
+ write_octeon_c0_icacheerr(0);
+ edac_device_handle_ce(ed, 0, 0, ed->ctl_name);
+ }
+ if (cache_err_dcache[core] & 1) {
+ edac_device_printk(ed, KERN_ERR, "CacheErr (Dcache) == %llx\n",
+ (unsigned long long)cache_err_dcache[core]);
+ cache_err_dcache[core] = 0;
+ edac_device_handle_ue(ed, 0, 0, ed->ctl_name);
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block co_cache_error_notifier = {
+ .notifier_call = co_cache_error_event,
+};
+
+static int __devinit co_cache_error_probe(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *ed;
+ int res = 0;
+
+ ed = edac_device_alloc_ctl_info(0, "cpu", 1, NULL, 0, 0, NULL, 0,
+ edac_device_alloc_index());
+
+ ed->dev = &pdev->dev;
+ platform_set_drvdata(pdev, ed);
+ ed->dev_name = dev_name(&pdev->dev);
+
+ ed->mod_name = "octeon-cpu";
+ ed->ctl_name = "co_cpu_err";
+
+ if (edac_device_add_device(ed) > 0) {
+ pr_err("%s: edac_device_add_device() failed\n", __func__);
+ goto err;
+ }
+
+ register_co_cache_error_notifier(&co_cache_error_notifier);
+ ed_cavium = ed;
+
+ return 0;
+
+err:
+ edac_device_free_ctl_info(ed);
+
+ return res;
+}
+
+static int co_cache_error_remove(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *ed = platform_get_drvdata(pdev);
+
+ unregister_co_cache_error_notifier(&co_cache_error_notifier);
+ ed_cavium = NULL;
+ edac_device_del_device(&pdev->dev);
+ edac_device_free_ctl_info(ed);
+
+ return 0;
+}
+
+static struct platform_driver co_cache_error_driver = {
+ .probe = co_cache_error_probe,
+ .remove = co_cache_error_remove,
+ .driver = {
+ .name = "co_pc_edac",
+ }
+};
+
+static int __init co_edac_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&co_cache_error_driver);
+ if (ret)
+ pr_warning(EDAC_MOD_STR "CPU err failed to register\n");
+
+ return ret;
+}
+
+static void __exit co_edac_exit(void)
+{
+ platform_driver_unregister(&co_cache_error_driver);
+}
+
+module_init(co_edac_init);
+module_exit(co_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
diff --git a/drivers/edac/octeon_edac-pci.c b/drivers/edac/octeon_edac-pci.c
new file mode 100644
index 000000000000..e72b96e3e4e0
--- /dev/null
+++ b/drivers/edac/octeon_edac-pci.c
@@ -0,0 +1,135 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wind River Systems,
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/edac.h>
+
+#include <asm/octeon/cvmx.h>
+#include <asm/octeon/cvmx-npi-defs.h>
+#include <asm/octeon/cvmx-pci-defs.h>
+#include <asm/octeon/octeon.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+#define EDAC_MOD_STR "octeon"
+
+static void co_pci_poll(struct edac_pci_ctl_info *pci)
+{
+ union cvmx_pci_cfg01 cfg01;
+
+ cfg01.u32 = octeon_npi_read32(CVMX_NPI_PCI_CFG01);
+ if (cfg01.s.dpe) { /* Detected parity error */
+ edac_pci_handle_pe(pci, pci->ctl_name);
+ cfg01.s.dpe = 1; /* Reset */
+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+ }
+ if (cfg01.s.sse) {
+ edac_pci_handle_npe(pci, "Signaled System Error");
+ cfg01.s.sse = 1; /* Reset */
+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+ }
+ if (cfg01.s.rma) {
+ edac_pci_handle_npe(pci, "Received Master Abort");
+ cfg01.s.rma = 1; /* Reset */
+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+ }
+ if (cfg01.s.rta) {
+ edac_pci_handle_npe(pci, "Received Target Abort");
+ cfg01.s.rta = 1; /* Reset */
+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+ }
+ if (cfg01.s.sta) {
+ edac_pci_handle_npe(pci, "Signaled Target Abort");
+ cfg01.s.sta = 1; /* Reset */
+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+ }
+ if (cfg01.s.mdpe) {
+ edac_pci_handle_npe(pci, "Master Data Parity Error");
+ cfg01.s.mdpe = 1; /* Reset */
+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+ }
+ if (cfg01.s.mdpe) {
+ edac_pci_handle_npe(pci, "Master Data Parity Error");
+ cfg01.s.mdpe = 1; /* Reset */
+ octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32);
+ }
+}
+
+static int __devinit co_pci_probe(struct platform_device *pdev)
+{
+ struct edac_pci_ctl_info *pci;
+ int res = 0;
+
+ pci = edac_pci_alloc_ctl_info(0, "octeon_pci_err");
+ if (!pci)
+ return -ENOMEM;
+
+ pci->dev = &pdev->dev;
+ platform_set_drvdata(pdev, pci);
+ pci->dev_name = dev_name(&pdev->dev);
+
+ pci->mod_name = "octeon-pci";
+ pci->ctl_name = "octeon_pci_err";
+ pci->edac_check = co_pci_poll;
+
+ if (edac_pci_add_device(pci, 0) > 0) {
+ pr_err("%s: edac_pci_add_device() failed\n", __func__);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ edac_pci_free_ctl_info(pci);
+
+ return res;
+}
+
+static int co_pci_remove(struct platform_device *pdev)
+{
+ struct edac_pci_ctl_info *pci = platform_get_drvdata(pdev);
+
+ edac_pci_del_device(&pdev->dev);
+ edac_pci_free_ctl_info(pci);
+
+ return 0;
+}
+
+static struct platform_driver co_pci_driver = {
+ .probe = co_pci_probe,
+ .remove = co_pci_remove,
+ .driver = {
+ .name = "co_pci_edac",
+ }
+};
+
+static int __init co_edac_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&co_pci_driver);
+ if (ret)
+ pr_warning(EDAC_MOD_STR " PCI EDAC failed to register\n");
+
+ return ret;
+}
+
+static void __exit co_edac_exit(void)
+{
+ platform_driver_unregister(&co_pci_driver);
+}
+
+module_init(co_edac_init);
+module_exit(co_edac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");