Merge tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the big slew of GPIO changes for the v5.3 kernel cycle. This
  is mostly incremental work this time.

  Three important things:

   - The FMC subsystem is deleted through my tree. This happens through
     GPIO as its demise was discussed in relation to a patch decoupling
     its GPIO implementation from the standard way of handling GPIO. As
     it turns out, that is not the only subsystem it reimplements and
     the authors think it is better do scratch it and start over using
     the proper kernel subsystems than try to polish the rust shiny. See
     the commit (ACKed by the maintainers) for details.

   - Arnd made a small devres patch that was ACKed by Greg and goes into
     the device core.

   - SPDX header change colissions may happen, because at times I've
     seen that quite a lot changed during the -rc:s in regards to SPDX.
     (It is good stuff, tglx has me convinced, and it is worth the
     occasional pain.)

  Apart from this is is nothing controversial or problematic.

  Summary:

  Core:

   - When a gpio_chip request GPIOs from itself, it can now fully
     control the line characteristics, both machine and consumer flags.
     This makes a lot of sense, but took some time before I figured out
     that this is how it has to work.

   - Several smallish documentation fixes.

  New drivers:

   - The PCA953x driver now supports the TI TCA9539.

   - The DaVinci driver now supports the K3 AM654 SoCs.

  Driver improvements:

   - Major overhaul and hardening of the OMAP driver by Russell King.

   - Starting to move some drivers to the new API passing irq_chip along
     with the gpio_chip when adding the gpio_chip instead of adding it
     separately.

  Unrelated:

   - Delete the FMC subsystem"

* tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  Revert "gpio: tegra: Clean-up debugfs initialisation"
  gpiolib: Use spinlock_t instead of struct spinlock
  gpio: stp-xway: allow compile-testing
  gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency
  gpio: stp-xway: improve module clock error handling
  gpio: stp-xway: simplify error handling in xway_stp_probe()
  gpiolib: Clarify use of non-sleeping functions
  gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants
  gpiolib: Document new gpio_chip.init_valid_mask field
  Documentation: gpio: Fix reference to gpiod_get_array()
  gpio: pl061: drop duplicate printing of device name
  gpio: altera: Pass irqchip when adding gpiochip
  gpio: siox: Use devm_ managed gpiochip
  gpio: siox: Add struct device *dev helper variable
  gpio: siox: Pass irqchip when adding gpiochip
  drivers: gpio: amd-fch: make resource struct const
  devres: allow const resource arguments
  gpio: ath79: Pass irqchip when adding gpiochip
  gpio: tegra: Clean-up debugfs initialisation
  gpio: siox: Switch to IRQ_TYPE_NONE
  ...

1 files changed, 17 insertions, 16 deletions

diff --git a/drivers/gpio/gpio-stp-xway.c b/drivers/gpio/gpio-stp-xway.c
index 24c478392394..9e23a5ae8108 100644
--- a/drivers/gpio/gpio-stp-xway.c
+++ b/drivers/gpio/gpio-stp-xway.c
@@ -15,8 +15,6 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 
-#include <lantiq_soc.h>
-
 /*
  * The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a
  * peripheral controller used to drive external shift register cascades. At most
@@ -71,8 +69,7 @@
 #define xway_stp_r32(m, reg)		__raw_readl(m + reg)
 #define xway_stp_w32(m, val, reg)	__raw_writel(val, m + reg)
 #define xway_stp_w32_mask(m, clear, set, reg) \
-		ltq_w32((ltq_r32(m + reg) & ~(clear)) | (set), \
-		m + reg)
+		xway_stp_w32(m, (xway_stp_r32(m, reg) & ~(clear)) | (set), reg)
 
 struct xway_stp {
 	struct gpio_chip gc;
@@ -156,9 +153,9 @@ static int xway_stp_request(struct gpio_chip *gc, unsigned gpio)
 
 /**
  * xway_stp_hw_init() - Configure the STP unit and enable the clock gate
- * @virt: pointer to the remapped register range
+ * @chip: Pointer to the xway_stp chip structure
  */
-static int xway_stp_hw_init(struct xway_stp *chip)
+static void xway_stp_hw_init(struct xway_stp *chip)
 {
 	/* sane defaults */
 	xway_stp_w32(chip->virt, 0, XWAY_STP_AR);
@@ -201,8 +198,6 @@ static int xway_stp_hw_init(struct xway_stp *chip)
 	if (chip->reserved)
 		xway_stp_w32_mask(chip->virt, XWAY_STP_UPD_MASK,
 			XWAY_STP_UPD_FPI, XWAY_STP_CON1);
-
-	return 0;
 }
 
 static int xway_stp_probe(struct platform_device *pdev)
@@ -258,21 +253,27 @@ static int xway_stp_probe(struct platform_device *pdev)
 	if (!of_find_property(pdev->dev.of_node, "lantiq,rising", NULL))
 		chip->edge = XWAY_STP_FALLING;
 
-	clk = clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "Failed to get clock\n");
 		return PTR_ERR(clk);
 	}
-	clk_enable(clk);
 
-	ret = xway_stp_hw_init(chip);
-	if (!ret)
-		ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
 
-	if (!ret)
-		dev_info(&pdev->dev, "Init done\n");
+	xway_stp_hw_init(chip);
 
-	return ret;
+	ret = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
+	if (ret) {
+		clk_disable_unprepare(clk);
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "Init done\n");
+
+	return 0;
 }
 
 static const struct of_device_id xway_stp_match[] = {