drm/i915/gen11: Convert combo PHY logic to use new 'enum phy' namespace

Convert the code that operates directly on gen11 combo PHY's to use the
new namespace.  Combo PHY registers are those named "ICL_PORT_*" plus
ICL_DPHY_CHKN.

Note that a lot of the PHY programming happens in the MIPI DSI code.
For clarity I've added a for_each_dsi_phy() to loop over the phys used
by DSI.  Since DSI always uses A & B on gen11, port=phy in all cases so
it doesn't actually matter which form we use in the DSI code.  I've used
the phy iterator in code that's explicitly working with the combo PHY,
but left the rest of the DSI code using the port iterator and namespace
to minimize patch deltas.  We can switch the rest of the DSI code over
to use phy terminology later if this winds up being too confusing.

v6: Drop an include of drm/i915_drm.h; that was previously included just
    for the definition of 'enum port' which this patch removes the need
    for.  (Jose)

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190709183934.445-4-matthew.d.roper@intel.com

1 files changed, 23 insertions, 22 deletions

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index e5b55b4928bb..b5c30a02761b 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -2414,7 +2414,7 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
 }
 
 static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
-					u32 level, enum port port, int type,
+					u32 level, enum phy phy, int type,
 					int rate)
 {
 	const struct cnl_ddi_buf_trans *ddi_translations = NULL;
@@ -2432,41 +2432,41 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
 	}
 
 	/* Set PORT_TX_DW5 */
-	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
+	val = I915_READ(ICL_PORT_TX_DW5_LN0(phy));
 	val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK |
 		  TAP2_DISABLE | TAP3_DISABLE);
 	val |= SCALING_MODE_SEL(0x2);
 	val |= RTERM_SELECT(0x6);
 	val |= TAP3_DISABLE;
-	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
+	I915_WRITE(ICL_PORT_TX_DW5_GRP(phy), val);
 
 	/* Program PORT_TX_DW2 */
-	val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
+	val = I915_READ(ICL_PORT_TX_DW2_LN0(phy));
 	val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
 		 RCOMP_SCALAR_MASK);
 	val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
 	val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
 	/* Program Rcomp scalar for every table entry */
 	val |= RCOMP_SCALAR(0x98);
-	I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
+	I915_WRITE(ICL_PORT_TX_DW2_GRP(phy), val);
 
 	/* Program PORT_TX_DW4 */
 	/* We cannot write to GRP. It would overwrite individual loadgen. */
 	for (ln = 0; ln <= 3; ln++) {
-		val = I915_READ(ICL_PORT_TX_DW4_LN(ln, port));
+		val = I915_READ(ICL_PORT_TX_DW4_LN(ln, phy));
 		val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
 			 CURSOR_COEFF_MASK);
 		val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
 		val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
 		val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
-		I915_WRITE(ICL_PORT_TX_DW4_LN(ln, port), val);
+		I915_WRITE(ICL_PORT_TX_DW4_LN(ln, phy), val);
 	}
 
 	/* Program PORT_TX_DW7 */
-	val = I915_READ(ICL_PORT_TX_DW7_LN0(port));
+	val = I915_READ(ICL_PORT_TX_DW7_LN0(phy));
 	val &= ~N_SCALAR_MASK;
 	val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
-	I915_WRITE(ICL_PORT_TX_DW7_GRP(port), val);
+	I915_WRITE(ICL_PORT_TX_DW7_GRP(phy), val);
 }
 
 static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
@@ -2474,7 +2474,7 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 					      enum intel_output_type type)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	enum port port = encoder->port;
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 	int width = 0;
 	int rate = 0;
 	u32 val;
@@ -2495,12 +2495,12 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	 * set PORT_PCS_DW1 cmnkeeper_enable to 1b,
 	 * else clear to 0b.
 	 */
-	val = I915_READ(ICL_PORT_PCS_DW1_LN0(port));
+	val = I915_READ(ICL_PORT_PCS_DW1_LN0(phy));
 	if (type == INTEL_OUTPUT_HDMI)
 		val &= ~COMMON_KEEPER_EN;
 	else
 		val |= COMMON_KEEPER_EN;
-	I915_WRITE(ICL_PORT_PCS_DW1_GRP(port), val);
+	I915_WRITE(ICL_PORT_PCS_DW1_GRP(phy), val);
 
 	/* 2. Program loadgen select */
 	/*
@@ -2510,33 +2510,33 @@ static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
 	 * > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
 	 */
 	for (ln = 0; ln <= 3; ln++) {
-		val = I915_READ(ICL_PORT_TX_DW4_LN(ln, port));
+		val = I915_READ(ICL_PORT_TX_DW4_LN(ln, phy));
 		val &= ~LOADGEN_SELECT;
 
 		if ((rate <= 600000 && width == 4 && ln >= 1) ||
 		    (rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
 			val |= LOADGEN_SELECT;
 		}
-		I915_WRITE(ICL_PORT_TX_DW4_LN(ln, port), val);
+		I915_WRITE(ICL_PORT_TX_DW4_LN(ln, phy), val);
 	}
 
 	/* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
-	val = I915_READ(ICL_PORT_CL_DW5(port));
+	val = I915_READ(ICL_PORT_CL_DW5(phy));
 	val |= SUS_CLOCK_CONFIG;
-	I915_WRITE(ICL_PORT_CL_DW5(port), val);
+	I915_WRITE(ICL_PORT_CL_DW5(phy), val);
 
 	/* 4. Clear training enable to change swing values */
-	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
+	val = I915_READ(ICL_PORT_TX_DW5_LN0(phy));
 	val &= ~TX_TRAINING_EN;
-	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
+	I915_WRITE(ICL_PORT_TX_DW5_GRP(phy), val);
 
 	/* 5. Program swing and de-emphasis */
-	icl_ddi_combo_vswing_program(dev_priv, level, port, type, rate);
+	icl_ddi_combo_vswing_program(dev_priv, level, phy, type, rate);
 
 	/* 6. Set training enable to trigger update */
-	val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
+	val = I915_READ(ICL_PORT_TX_DW5_LN0(phy));
 	val |= TX_TRAINING_EN;
-	I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
+	I915_WRITE(ICL_PORT_TX_DW5_GRP(phy), val);
 }
 
 static void icl_mg_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
@@ -3121,6 +3121,7 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	enum port port = encoder->port;
+	enum phy phy = intel_port_to_phy(dev_priv, port);
 	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
 	bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
 	int level = intel_ddi_dp_level(intel_dp);
@@ -3156,7 +3157,7 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 		bool lane_reversal =
 			dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
 
-		intel_combo_phy_power_up_lanes(dev_priv, port, false,
+		intel_combo_phy_power_up_lanes(dev_priv, phy, false,
 					       crtc_state->lane_count,
 					       lane_reversal);
 	}