drm/i915: Support for GuC interrupts

There are certain types of interrupts which Host can receive from GuC.
GuC ukernel sends an interrupt to Host for certain events, like for
example retrieve/consume the logs generated by ukernel.
This patch adds support to receive interrupts from GuC but currently
enables & partially handles only the interrupt sent by GuC ukernel.
Future patches will add support for handling other interrupt types.

v2:
- Use common low level routines for PM IER/IIR programming (Chris)
- Rename interrupt functions to gen9_xxx from gen8_xxx (Chris)
- Replace disabling of wake ref asserts with rpm get/put (Chris)

v3:
- Update comments for more clarity. (Tvrtko)
- Remove the masking of GuC interrupt, which was kept masked till the
  start of bottom half, its not really needed as there is only a
  single instance of work item & wq is ordered. (Tvrtko)

v4:
- Rebase.
- Rename guc_events to pm_guc_events so as to be indicative of the
  register/control block it is associated with. (Chris)
- Add handling for back to back log buffer flush interrupts.

v5:
- Move the read & clearing of register, containing Guc2Host message
  bits, outside the irq spinlock. (Tvrtko)

v6:
- Move the log buffer flush interrupt related stuff to the following
  patch so as to do only generic bits in this patch. (Tvrtko)
- Rebase.

v7:
- Remove the interrupts_enabled check from gen9_guc_irq_handler, want to
  process that last interrupt also before disabling the interrupt, sync
  against the work queued by irq handler will be done by caller disabling
  the interrupt.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

1 files changed, 11 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index a9be3f037f43..bdc7b3591e1c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6016,6 +6016,7 @@ enum {
 #define  GEN8_DE_PIPE_A_IRQ		(1<<16)
 #define  GEN8_DE_PIPE_IRQ(pipe)		(1<<(16+(pipe)))
 #define  GEN8_GT_VECS_IRQ		(1<<6)
+#define  GEN8_GT_GUC_IRQ		(1<<5)
 #define  GEN8_GT_PM_IRQ			(1<<4)
 #define  GEN8_GT_VCS2_IRQ		(1<<3)
 #define  GEN8_GT_VCS1_IRQ		(1<<2)
@@ -6027,6 +6028,16 @@ enum {
 #define GEN8_GT_IIR(which) _MMIO(0x44308 + (0x10 * (which)))
 #define GEN8_GT_IER(which) _MMIO(0x4430c + (0x10 * (which)))
 
+#define GEN9_GUC_TO_HOST_INT_EVENT	(1<<31)
+#define GEN9_GUC_EXEC_ERROR_EVENT	(1<<30)
+#define GEN9_GUC_DISPLAY_EVENT		(1<<29)
+#define GEN9_GUC_SEMA_SIGNAL_EVENT	(1<<28)
+#define GEN9_GUC_IOMMU_MSG_EVENT	(1<<27)
+#define GEN9_GUC_DB_RING_EVENT		(1<<26)
+#define GEN9_GUC_DMA_DONE_EVENT		(1<<25)
+#define GEN9_GUC_FATAL_ERROR_EVENT	(1<<24)
+#define GEN9_GUC_NOTIFICATION_EVENT	(1<<23)
+
 #define GEN8_RCS_IRQ_SHIFT 0
 #define GEN8_BCS_IRQ_SHIFT 16
 #define GEN8_VCS1_IRQ_SHIFT 0