drm/i915/icl: Configure DSI transcoders

This patch programs DSI operation mode, pixel format,
BGR info, link calibration etc for the DSI transcoder.
This patch also extract BGR info of the DSI panel from
VBT and save it inside struct intel_dsi which used for
configuring DSI transcoder.

v2: Rebase
v3: Use newly defined bitfields.

v4 by Jani:
 - Use intel_dsi_bitrate()
 - Make bgr_enabled bool
 - Use 0 instead of 0x0
 - Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode
 - Use is_vid_mode()

Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7de4e39a4b2a18e53a2b9d9cea5b5b4c9d6eeb34.1539613303.git.jani.nikula@intel.com

1 files changed, 86 insertions, 1 deletions

diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index 407c3065d08d..756c75d0c86c 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -27,7 +27,7 @@
 
 #include "intel_dsi.h"
 
-static enum transcoder __attribute__((unused)) dsi_port_to_transcoder(enum port port)
+static enum transcoder dsi_port_to_transcoder(enum port port)
 {
 	if (port == PORT_A)
 		return TRANSCODER_DSI_0;
@@ -340,6 +340,88 @@ static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
 	}
 }
 
+static void gen11_dsi_configure_transcoder(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	u32 tmp;
+	enum port port;
+	enum transcoder dsi_trans;
+
+	for_each_dsi_port(port, intel_dsi->ports) {
+		dsi_trans = dsi_port_to_transcoder(port);
+		tmp = I915_READ(DSI_TRANS_FUNC_CONF(dsi_trans));
+
+		if (intel_dsi->eotp_pkt)
+			tmp &= ~EOTP_DISABLED;
+		else
+			tmp |= EOTP_DISABLED;
+
+		/* enable link calibration if freq > 1.5Gbps */
+		if (intel_dsi_bitrate(intel_dsi) >= 1500 * 1000) {
+			tmp &= ~LINK_CALIBRATION_MASK;
+			tmp |= CALIBRATION_ENABLED_INITIAL_ONLY;
+		}
+
+		/* configure continuous clock */
+		tmp &= ~CONTINUOUS_CLK_MASK;
+		if (intel_dsi->clock_stop)
+			tmp |= CLK_ENTER_LP_AFTER_DATA;
+		else
+			tmp |= CLK_HS_CONTINUOUS;
+
+		/* configure buffer threshold limit to minimum */
+		tmp &= ~PIX_BUF_THRESHOLD_MASK;
+		tmp |= PIX_BUF_THRESHOLD_1_4;
+
+		/* set virtual channel to '0' */
+		tmp &= ~PIX_VIRT_CHAN_MASK;
+		tmp |= PIX_VIRT_CHAN(0);
+
+		/* program BGR transmission */
+		if (intel_dsi->bgr_enabled)
+			tmp |= BGR_TRANSMISSION;
+
+		/* select pixel format */
+		tmp &= ~PIX_FMT_MASK;
+		switch (intel_dsi->pixel_format) {
+		default:
+			MISSING_CASE(intel_dsi->pixel_format);
+			/* fallthrough */
+		case MIPI_DSI_FMT_RGB565:
+			tmp |= PIX_FMT_RGB565;
+			break;
+		case MIPI_DSI_FMT_RGB666_PACKED:
+			tmp |= PIX_FMT_RGB666_PACKED;
+			break;
+		case MIPI_DSI_FMT_RGB666:
+			tmp |= PIX_FMT_RGB666_LOOSE;
+			break;
+		case MIPI_DSI_FMT_RGB888:
+			tmp |= PIX_FMT_RGB888;
+			break;
+		}
+
+		/* program DSI operation mode */
+		if (is_vid_mode(intel_dsi)) {
+			tmp &= ~OP_MODE_MASK;
+			switch (intel_dsi->video_mode_format) {
+			default:
+				MISSING_CASE(intel_dsi->video_mode_format);
+				/* fallthrough */
+			case VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS:
+				tmp |= VIDEO_MODE_SYNC_EVENT;
+				break;
+			case VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE:
+				tmp |= VIDEO_MODE_SYNC_PULSE;
+				break;
+			}
+		}
+
+		I915_WRITE(DSI_TRANS_FUNC_CONF(dsi_trans), tmp);
+	}
+}
+
 static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
 {
 	/* step 4a: power up all lanes of the DDI used by DSI */
@@ -356,6 +438,9 @@ static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
 
 	/* setup D-PHY timings */
 	gen11_dsi_setup_dphy_timings(encoder);
+
+	/* Step (4h, 4i, 4j, 4k): Configure transcoder */
+	gen11_dsi_configure_transcoder(encoder);
 }
 
 static void __attribute__((unused))