drm/i915: Rename HAS_GMCH

First of all GMCH can be considered a feature by itself
since it is a chip present in some platforms that connects
the IA processor to memory and other components in PC.

Also with the introduction of display block at device info,
we got a redundant definition:

.display.has_gmch_display = 1,

So, let's clean up things a bit and use the standardized
way of has_feature on displays side.

No functional change and no manual interaction to generate
this patch.

It is only:

sed -si -e 's/has_gmch_display/has_gmch/g' \
    	-e 's/HAS_GMCH_DISPLAY/HAS_GMCH/g' drivers/gpu/drm/i915/*{c,h}

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190204222538.15842-1-rodrigo.vivi@intel.com

1 files changed, 14 insertions, 14 deletions

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 8b36ee183c7e..d324b816350b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1805,7 +1805,7 @@ static void intel_enable_pipe(const struct intel_crtc_state *new_crtc_state)
 	 * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
 	 * need the check.
 	 */
-	if (HAS_GMCH_DISPLAY(dev_priv)) {
+	if (HAS_GMCH(dev_priv)) {
 		if (intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
 			assert_dsi_pll_enabled(dev_priv);
 		else
@@ -2094,7 +2094,7 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
 	 * complicated than this. For example, Cherryview appears quite
 	 * happy to scanout from anywhere within its global aperture.
 	 */
-	if (HAS_GMCH_DISPLAY(dev_priv))
+	if (HAS_GMCH(dev_priv))
 		pinctl |= PIN_MAPPABLE;
 
 	vma = i915_gem_object_pin_to_display_plane(obj,
@@ -3195,7 +3195,7 @@ i9xx_plane_max_stride(struct intel_plane *plane,
 {
 	struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
 
-	if (!HAS_GMCH_DISPLAY(dev_priv)) {
+	if (!HAS_GMCH(dev_priv)) {
 		return 32*1024;
 	} else if (INTEL_GEN(dev_priv) >= 4) {
 		if (modifier == I915_FORMAT_MOD_X_TILED)
@@ -3771,7 +3771,7 @@ __intel_display_resume(struct drm_device *dev,
 	}
 
 	/* ignore any reset values/BIOS leftovers in the WM registers */
-	if (!HAS_GMCH_DISPLAY(to_i915(dev)))
+	if (!HAS_GMCH(to_i915(dev)))
 		to_intel_atomic_state(state)->skip_intermediate_wm = true;
 
 	ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
@@ -5294,7 +5294,7 @@ intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
 	 * event which is after the vblank start event, so we need to have a
 	 * wait-for-vblank between disabling the plane and the pipe.
 	 */
-	if (HAS_GMCH_DISPLAY(dev_priv) &&
+	if (HAS_GMCH(dev_priv) &&
 	    intel_set_memory_cxsr(dev_priv, false))
 		intel_wait_for_vblank(dev_priv, pipe);
 }
@@ -5431,7 +5431,7 @@ static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
 	 * event which is after the vblank start event, so we need to have a
 	 * wait-for-vblank between disabling the plane and the pipe.
 	 */
-	if (HAS_GMCH_DISPLAY(dev_priv) && old_crtc_state->base.active &&
+	if (HAS_GMCH(dev_priv) && old_crtc_state->base.active &&
 	    pipe_config->disable_cxsr && intel_set_memory_cxsr(dev_priv, false))
 		intel_wait_for_vblank(dev_priv, crtc->pipe);
 
@@ -6705,7 +6705,7 @@ static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
 
-	if (HAS_GMCH_DISPLAY(dev_priv))
+	if (HAS_GMCH(dev_priv))
 		/* FIXME calculate proper pipe pixel rate for GMCH pfit */
 		crtc_state->pixel_rate =
 			crtc_state->base.adjusted_mode.crtc_clock;
@@ -9814,7 +9814,7 @@ static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
 	base += plane_state->color_plane[0].offset;
 
 	/* ILK+ do this automagically */
-	if (HAS_GMCH_DISPLAY(dev_priv) &&
+	if (HAS_GMCH(dev_priv) &&
 	    plane_state->base.rotation & DRM_MODE_ROTATE_180)
 		base += (plane_state->base.crtc_h *
 			 plane_state->base.crtc_w - 1) * fb->format->cpp[0];
@@ -11356,7 +11356,7 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,
 			      pipe_config->scaler_state.scaler_users,
 		              pipe_config->scaler_state.scaler_id);
 
-	if (HAS_GMCH_DISPLAY(dev_priv))
+	if (HAS_GMCH(dev_priv))
 		DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
 			      pipe_config->gmch_pfit.control,
 			      pipe_config->gmch_pfit.pgm_ratios,
@@ -13096,7 +13096,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 
 			/* FIXME unify this for all platforms */
 			if (!new_crtc_state->active &&
-			    !HAS_GMCH_DISPLAY(dev_priv) &&
+			    !HAS_GMCH(dev_priv) &&
 			    dev_priv->display.initial_watermarks)
 				dev_priv->display.initial_watermarks(intel_state,
 								     new_intel_crtc_state);
@@ -15074,7 +15074,7 @@ retry:
 	 * intermediate watermarks (since we don't trust the current
 	 * watermarks).
 	 */
-	if (!HAS_GMCH_DISPLAY(dev_priv))
+	if (!HAS_GMCH(dev_priv))
 		intel_state->skip_intermediate_wm = true;
 
 	ret = intel_atomic_check(dev, state);
@@ -15315,7 +15315,7 @@ int intel_modeset_init(struct drm_device *dev)
 	 * Note that we need to do this after reconstructing the BIOS fb's
 	 * since the watermark calculation done here will use pstate->fb.
 	 */
-	if (!HAS_GMCH_DISPLAY(dev_priv))
+	if (!HAS_GMCH(dev_priv))
 		sanitize_watermarks(dev);
 
 	/*
@@ -15524,7 +15524,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc,
 	if (crtc_state->base.active && !intel_crtc_has_encoders(crtc))
 		intel_crtc_disable_noatomic(&crtc->base, ctx);
 
-	if (crtc_state->base.active || HAS_GMCH_DISPLAY(dev_priv)) {
+	if (crtc_state->base.active || HAS_GMCH(dev_priv)) {
 		/*
 		 * We start out with underrun reporting disabled to avoid races.
 		 * For correct bookkeeping mark this on active crtcs.
@@ -16271,7 +16271,7 @@ intel_display_capture_error_state(struct drm_i915_private *dev_priv)
 
 		error->pipe[i].source = I915_READ(PIPESRC(i));
 
-		if (HAS_GMCH_DISPLAY(dev_priv))
+		if (HAS_GMCH(dev_priv))
 			error->pipe[i].stat = I915_READ(PIPESTAT(i));
 	}