Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.1:

UAPI Changes:

Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.

Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
  ("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
  drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
  takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.

Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
  nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
  Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
  is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
  X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
  dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701  init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
  helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com

1 files changed, 188 insertions, 4 deletions

diff --git a/drivers/gpu/drm/mgag200/mgag200_g200ew3.c b/drivers/gpu/drm/mgag200/mgag200_g200ew3.c
index 3bfc1324cf78..170934414d7d 100644
--- a/drivers/gpu/drm/mgag200/mgag200_g200ew3.c
+++ b/drivers/gpu/drm/mgag200/mgag200_g200ew3.c
@@ -2,10 +2,179 @@
 
 #include <linux/pci.h>
 
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
 #include <drm/drm_drv.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_probe_helper.h>
 
 #include "mgag200_drv.h"
 
+static void mgag200_g200ew3_init_registers(struct mga_device *mdev)
+{
+	mgag200_g200wb_init_registers(mdev); // same as G200WB
+
+	WREG_ECRT(0x34, 0x5); // G200EW3 specific
+}
+
+/*
+ * PIXPLLC
+ */
+
+static int mgag200_g200ew3_pixpllc_atomic_check(struct drm_crtc *crtc,
+						struct drm_atomic_state *new_state)
+{
+	static const unsigned int vcomax = 800000;
+	static const unsigned int vcomin = 400000;
+	static const unsigned int pllreffreq = 25000;
+
+	struct drm_crtc_state *new_crtc_state = drm_atomic_get_new_crtc_state(new_state, crtc);
+	struct mgag200_crtc_state *new_mgag200_crtc_state = to_mgag200_crtc_state(new_crtc_state);
+	long clock = new_crtc_state->mode.clock;
+	struct mgag200_pll_values *pixpllc = &new_mgag200_crtc_state->pixpllc;
+	unsigned int delta, tmpdelta;
+	unsigned int testp, testm, testn, testp2;
+	unsigned int p, m, n, s;
+	unsigned int computed;
+
+	m = n = p = s = 0;
+	delta = 0xffffffff;
+
+	for (testp = 1; testp < 8; testp++) {
+		for (testp2 = 1; testp2 < 8; testp2++) {
+			if (testp < testp2)
+				continue;
+			if ((clock * testp * testp2) > vcomax)
+				continue;
+			if ((clock * testp * testp2) < vcomin)
+				continue;
+			for (testm = 1; testm < 26; testm++) {
+				for (testn = 32; testn < 2048 ; testn++) {
+					computed = (pllreffreq * testn) / (testm * testp * testp2);
+					if (computed > clock)
+						tmpdelta = computed - clock;
+					else
+						tmpdelta = clock - computed;
+					if (tmpdelta < delta) {
+						delta = tmpdelta;
+						m = testm + 1;
+						n = testn + 1;
+						p = testp + 1;
+						s = testp2;
+					}
+				}
+			}
+		}
+	}
+
+	pixpllc->m = m;
+	pixpllc->n = n;
+	pixpllc->p = p;
+	pixpllc->s = s;
+
+	return 0;
+}
+
+/*
+ * Mode-setting pipeline
+ */
+
+static const struct drm_plane_helper_funcs mgag200_g200ew3_primary_plane_helper_funcs = {
+	MGAG200_PRIMARY_PLANE_HELPER_FUNCS,
+};
+
+static const struct drm_plane_funcs mgag200_g200ew3_primary_plane_funcs = {
+	MGAG200_PRIMARY_PLANE_FUNCS,
+};
+
+static const struct drm_crtc_helper_funcs mgag200_g200ew3_crtc_helper_funcs = {
+	MGAG200_CRTC_HELPER_FUNCS,
+};
+
+static const struct drm_crtc_funcs mgag200_g200ew3_crtc_funcs = {
+	MGAG200_CRTC_FUNCS,
+};
+
+static const struct drm_encoder_funcs mgag200_g200ew3_dac_encoder_funcs = {
+	MGAG200_DAC_ENCODER_FUNCS,
+};
+
+static const struct drm_connector_helper_funcs mgag200_g200ew3_vga_connector_helper_funcs = {
+	MGAG200_VGA_CONNECTOR_HELPER_FUNCS,
+};
+
+static const struct drm_connector_funcs mgag200_g200ew3_vga_connector_funcs = {
+	MGAG200_VGA_CONNECTOR_FUNCS,
+};
+
+static int mgag200_g200ew3_pipeline_init(struct mga_device *mdev)
+{
+	struct drm_device *dev = &mdev->base;
+	struct drm_plane *primary_plane = &mdev->primary_plane;
+	struct drm_crtc *crtc = &mdev->crtc;
+	struct drm_encoder *encoder = &mdev->encoder;
+	struct mga_i2c_chan *i2c = &mdev->i2c;
+	struct drm_connector *connector = &mdev->connector;
+	int ret;
+
+	ret = drm_universal_plane_init(dev, primary_plane, 0,
+				       &mgag200_g200ew3_primary_plane_funcs,
+				       mgag200_primary_plane_formats,
+				       mgag200_primary_plane_formats_size,
+				       mgag200_primary_plane_fmtmods,
+				       DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret) {
+		drm_err(dev, "drm_universal_plane_init() failed: %d\n", ret);
+		return ret;
+	}
+	drm_plane_helper_add(primary_plane, &mgag200_g200ew3_primary_plane_helper_funcs);
+	drm_plane_enable_fb_damage_clips(primary_plane);
+
+	ret = drm_crtc_init_with_planes(dev, crtc, primary_plane, NULL,
+					&mgag200_g200ew3_crtc_funcs, NULL);
+	if (ret) {
+		drm_err(dev, "drm_crtc_init_with_planes() failed: %d\n", ret);
+		return ret;
+	}
+	drm_crtc_helper_add(crtc, &mgag200_g200ew3_crtc_helper_funcs);
+
+	/* FIXME: legacy gamma tables, but atomic gamma doesn't work without */
+	drm_mode_crtc_set_gamma_size(crtc, MGAG200_LUT_SIZE);
+	drm_crtc_enable_color_mgmt(crtc, 0, false, MGAG200_LUT_SIZE);
+
+	encoder->possible_crtcs = drm_crtc_mask(crtc);
+	ret = drm_encoder_init(dev, encoder, &mgag200_g200ew3_dac_encoder_funcs,
+			       DRM_MODE_ENCODER_DAC, NULL);
+	if (ret) {
+		drm_err(dev, "drm_encoder_init() failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = mgag200_i2c_init(mdev, i2c);
+	if (ret) {
+		drm_err(dev, "failed to add DDC bus: %d\n", ret);
+		return ret;
+	}
+
+	ret = drm_connector_init_with_ddc(dev, connector,
+					  &mgag200_g200ew3_vga_connector_funcs,
+					  DRM_MODE_CONNECTOR_VGA,
+					  &i2c->adapter);
+	if (ret) {
+		drm_err(dev, "drm_connector_init_with_ddc() failed: %d\n", ret);
+		return ret;
+	}
+	drm_connector_helper_add(connector, &mgag200_g200ew3_vga_connector_helper_funcs);
+
+	ret = drm_connector_attach_encoder(connector, encoder);
+	if (ret) {
+		drm_err(dev, "drm_connector_attach_encoder() failed: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 /*
  * DRM device
  */
@@ -13,6 +182,13 @@
 static const struct mgag200_device_info mgag200_g200ew3_device_info =
 	MGAG200_DEVICE_INFO_INIT(2048, 2048, 0, true, 0, 1, false);
 
+static const struct mgag200_device_funcs mgag200_g200ew3_device_funcs = {
+	.disable_vidrst = mgag200_bmc_disable_vidrst,
+	.enable_vidrst = mgag200_bmc_enable_vidrst,
+	.pixpllc_atomic_check = mgag200_g200ew3_pixpllc_atomic_check,
+	.pixpllc_atomic_update = mgag200_g200wb_pixpllc_atomic_update, // same as G200WB
+};
+
 static resource_size_t mgag200_g200ew3_device_probe_vram(struct mga_device *mdev)
 {
 	resource_size_t vram_size = resource_size(mdev->vram_res);
@@ -23,8 +199,7 @@ static resource_size_t mgag200_g200ew3_device_probe_vram(struct mga_device *mdev
 }
 
 struct mga_device *mgag200_g200ew3_device_create(struct pci_dev *pdev,
-						 const struct drm_driver *drv,
-						 enum mga_type type)
+						 const struct drm_driver *drv)
 {
 	struct mga_device *mdev;
 	struct drm_device *dev;
@@ -46,15 +221,24 @@ struct mga_device *mgag200_g200ew3_device_create(struct pci_dev *pdev,
 	if (ret)
 		return ERR_PTR(ret);
 
-	ret = mgag200_device_init(mdev, type, &mgag200_g200ew3_device_info);
+	ret = mgag200_device_init(mdev, &mgag200_g200ew3_device_info,
+				  &mgag200_g200ew3_device_funcs);
 	if (ret)
 		return ERR_PTR(ret);
 
+	mgag200_g200ew3_init_registers(mdev);
+
 	vram_available = mgag200_g200ew3_device_probe_vram(mdev);
 
-	ret = mgag200_modeset_init(mdev, vram_available);
+	ret = mgag200_mode_config_init(mdev, vram_available);
 	if (ret)
 		return ERR_PTR(ret);
 
+	ret = mgag200_g200ew3_pipeline_init(mdev);
+	if (ret)
+		return ERR_PTR(ret);
+
+	drm_mode_config_reset(dev);
+
 	return mdev;
 }