Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.1:

UAPI Changes:

Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.

Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
  ("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
  drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
  takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.

Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
  nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
  Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
  is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
  X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
  dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701  init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
  helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com

1 files changed, 15 insertions, 50 deletions

diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c
index 1cc8f3fc8e4b..8d7728181de0 100644
--- a/drivers/gpu/drm/virtio/virtgpu_object.c
+++ b/drivers/gpu/drm/virtio/virtgpu_object.c
@@ -67,21 +67,6 @@ void virtio_gpu_cleanup_object(struct virtio_gpu_object *bo)
 
 	virtio_gpu_resource_id_put(vgdev, bo->hw_res_handle);
 	if (virtio_gpu_is_shmem(bo)) {
-		struct virtio_gpu_object_shmem *shmem = to_virtio_gpu_shmem(bo);
-
-		if (shmem->pages) {
-			if (shmem->mapped) {
-				dma_unmap_sgtable(vgdev->vdev->dev.parent,
-					     shmem->pages, DMA_TO_DEVICE, 0);
-				shmem->mapped = 0;
-			}
-
-			sg_free_table(shmem->pages);
-			kfree(shmem->pages);
-			shmem->pages = NULL;
-			drm_gem_shmem_unpin(&bo->base);
-		}
-
 		drm_gem_shmem_free(&bo->base);
 	} else if (virtio_gpu_is_vram(bo)) {
 		struct virtio_gpu_object_vram *vram = to_virtio_gpu_vram(bo);
@@ -153,35 +138,18 @@ static int virtio_gpu_object_shmem_init(struct virtio_gpu_device *vgdev,
 					unsigned int *nents)
 {
 	bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
-	struct virtio_gpu_object_shmem *shmem = to_virtio_gpu_shmem(bo);
 	struct scatterlist *sg;
-	int si, ret;
+	struct sg_table *pages;
+	int si;
 
-	ret = drm_gem_shmem_pin(&bo->base);
-	if (ret < 0)
-		return -EINVAL;
-
-	/*
-	 * virtio_gpu uses drm_gem_shmem_get_sg_table instead of
-	 * drm_gem_shmem_get_pages_sgt because virtio has it's own set of
-	 * dma-ops. This is discouraged for other drivers, but should be fine
-	 * since virtio_gpu doesn't support dma-buf import from other devices.
-	 */
-	shmem->pages = drm_gem_shmem_get_sg_table(&bo->base);
-	if (IS_ERR(shmem->pages)) {
-		drm_gem_shmem_unpin(&bo->base);
-		return PTR_ERR(shmem->pages);
-	}
+	pages = drm_gem_shmem_get_pages_sgt(&bo->base);
+	if (IS_ERR(pages))
+		return PTR_ERR(pages);
 
-	if (use_dma_api) {
-		ret = dma_map_sgtable(vgdev->vdev->dev.parent,
-				      shmem->pages, DMA_TO_DEVICE, 0);
-		if (ret)
-			return ret;
-		*nents = shmem->mapped = shmem->pages->nents;
-	} else {
-		*nents = shmem->pages->orig_nents;
-	}
+	if (use_dma_api)
+		*nents = pages->nents;
+	else
+		*nents = pages->orig_nents;
 
 	*ents = kvmalloc_array(*nents,
 			       sizeof(struct virtio_gpu_mem_entry),
@@ -192,13 +160,13 @@ static int virtio_gpu_object_shmem_init(struct virtio_gpu_device *vgdev,
 	}
 
 	if (use_dma_api) {
-		for_each_sgtable_dma_sg(shmem->pages, sg, si) {
+		for_each_sgtable_dma_sg(pages, sg, si) {
 			(*ents)[si].addr = cpu_to_le64(sg_dma_address(sg));
 			(*ents)[si].length = cpu_to_le32(sg_dma_len(sg));
 			(*ents)[si].padding = 0;
 		}
 	} else {
-		for_each_sgtable_sg(shmem->pages, sg, si) {
+		for_each_sgtable_sg(pages, sg, si) {
 			(*ents)[si].addr = cpu_to_le64(sg_phys(sg));
 			(*ents)[si].length = cpu_to_le32(sg->length);
 			(*ents)[si].padding = 0;
@@ -234,6 +202,10 @@ int virtio_gpu_object_create(struct virtio_gpu_device *vgdev,
 
 	bo->dumb = params->dumb;
 
+	ret = virtio_gpu_object_shmem_init(vgdev, bo, &ents, &nents);
+	if (ret != 0)
+		goto err_put_id;
+
 	if (fence) {
 		ret = -ENOMEM;
 		objs = virtio_gpu_array_alloc(1);
@@ -246,13 +218,6 @@ int virtio_gpu_object_create(struct virtio_gpu_device *vgdev,
 			goto err_put_objs;
 	}
 
-	ret = virtio_gpu_object_shmem_init(vgdev, bo, &ents, &nents);
-	if (ret != 0) {
-		virtio_gpu_array_put_free(objs);
-		virtio_gpu_free_object(&shmem_obj->base);
-		return ret;
-	}
-
 	if (params->blob) {
 		if (params->blob_mem == VIRTGPU_BLOB_MEM_GUEST)
 			bo->guest_blob = true;