Merge tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hmon updates from Guenter Roeck:
 "New drivers:
   - ISL28022 power monitor
   - Nuvoton NCT7363Y

  Added support for new chips to existing drivers:
   - The tmp180 driver now supports NXP p3t1085, including its I3C mode
   - The ina2xx driver now supports SY24655 and INA260
   - The amc6821 driver now supports tsd,mule

  Other notable improvements:
   - The sht4x driver now supports the chip heater
   - The pmbus/isl68137 driver now supports a voltage divider on Vout
   - The cros_ec driver registers with the thermal framework
   - The pmbus/ltc2978 driver now supports LTC7841
   - The PMBus core now allow drivers to override WRITE_PROTECT

  Various other minor improvements and cleanups"

* tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits)
  hwmon: (pmbus/isl68137) add support for voltage divider on Vout
  dt-bindings: hwmon: isl68137: add bindings to support voltage dividers
  hwmon: tmp108: fix I3C dependency
  hwmon: (cros_ec) register thermal sensors to thermal framework
  hwmon: (tmp108) Add support for I3C device
  hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support
  hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method
  hwmon: (nct6775-core) Fix overflows seen when writing limit attributes
  hwmon: (pwm-fan) Introduce start from stopped state handling
  dt-bindings: hwmon: pwm-fan: Document start from stopped state properties
  hwmon: (tmp108) Add NXP p3t1085 support
  dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string
  hwmon: (sch5627, max31827) Fix typos in driver documentation
  hwmon: (jc42) Drop of_match_ptr() protection
  hwmon: (f71882fg) Fix grammar in fan speed trip points explanation
  dt-bindings: hwmon: pmbus: add ti tps25990 support
  hwmon: (pmbus/core) clear faults after setting smbalert mask
  hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT
  hwmon: (pmbus) add documentation for existing flags
  hwmon: (ina226) Add support for SY24655
  ...

1 files changed, 28 insertions, 3 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 1e3a1f4d5c5e..dd376602f3f1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -855,6 +855,17 @@ config SENSORS_CORETEMP
 	  sensor inside your CPU. Most of the family 6 CPUs
 	  are supported. Check Documentation/hwmon/coretemp.rst for details.
 
+config SENSORS_ISL28022
+	tristate "Renesas ISL28022"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for ISL28022 power monitor.
+	  Check Documentation/hwmon/isl28022.rst for details.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called isl28022.
+
 config SENSORS_IT87
 	tristate "ITE IT87xx and compatibles"
 	depends on HAS_IOPORT
@@ -1670,6 +1681,17 @@ config SENSORS_NCT6775_I2C
 	  This driver can also be built as a module. If so, the module
 	  will be called nct6775-i2c.
 
+config SENSORS_NCT7363
+	tristate "Nuvoton NCT7363Y"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Nuvoton NCT7363Y
+	  hardware monitoring chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nct7363.
+
 config SENSORS_NCT7802
 	tristate "Nuvoton NCT7802Y"
 	depends on I2C
@@ -2167,11 +2189,12 @@ config SENSORS_INA2XX
 	select REGMAP_I2C
 	help
 	  If you say yes here you get support for INA219, INA220, INA226,
-	  INA230, and INA231 power monitor chips.
+	  INA230, INA231, INA260, and SY24655 power monitor chips.
 
 	  The INA2xx driver is configured for the default configuration of
 	  the part as described in the datasheet.
-	  Default value for Rshunt is 10 mOhms.
+	  Default value for Rshunt is 10 mOhms except for INA260 which has an
+	  internal 2 mOhm shunt resistor.
 	  This driver can also be built as a module. If so, the module
 	  will be called ina2xx.
 
@@ -2274,10 +2297,12 @@ config SENSORS_TMP103
 config SENSORS_TMP108
 	tristate "Texas Instruments TMP108"
 	depends on I2C
+	depends on I3C || !I3C
 	select REGMAP_I2C
+	select REGMAP_I3C if I3C
 	help
 	  If you say yes here you get support for Texas Instruments TMP108
-	  sensor chips.
+	  sensor chips and NXP P3T1085.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called tmp108.