summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2019-10-11 09:18:02 +0200
committerJonathan Cameron <Jonathan.Cameron@huawei.com>2019-10-18 19:37:08 +0100
commitd17e86cb16e088336501bed1fdec45f705d85c5f (patch)
treec92b6353b4bcd65785d0c8688b6919439d76b7ab /drivers/hwmon
parent1e82623c3ca6f58a40c8ffbbbc4cfd3f102a04cc (diff)
hwmon: ab8500: Convert to IIO ADC
This switches the AB8500 hardware monitor driver to using the standard IIO ADC channel lookup and conversion routines. Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig3
-rw-r--r--drivers/hwmon/ab8500.c65
2 files changed, 43 insertions, 25 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 13a6b4afb4b3..5308c59d7001 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -40,7 +40,8 @@ comment "Native drivers"
config SENSORS_AB8500
tristate "AB8500 thermal monitoring"
- depends on AB8500_GPADC && AB8500_BM
+ depends on AB8500_GPADC && AB8500_BM && (IIO = y)
+ default n
help
If you say yes here you get support for the thermal sensor part
of the AB8500 chip. The driver includes thermal management for
diff --git a/drivers/hwmon/ab8500.c b/drivers/hwmon/ab8500.c
index 207f77f85a40..53f3379d799d 100644
--- a/drivers/hwmon/ab8500.c
+++ b/drivers/hwmon/ab8500.c
@@ -17,20 +17,24 @@
#include <linux/hwmon-sysfs.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/power/ab8500.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
+#include <linux/iio/consumer.h>
#include "abx500.h"
#define DEFAULT_POWER_OFF_DELAY (HZ * 10)
#define THERMAL_VCC 1800
#define PULL_UP_RESISTOR 47000
-/* Number of monitored sensors should not greater than NUM_SENSORS */
-#define NUM_MONITORED_SENSORS 4
+
+#define AB8500_SENSOR_AUX1 0
+#define AB8500_SENSOR_AUX2 1
+#define AB8500_SENSOR_BTEMP_BALL 2
+#define AB8500_SENSOR_BAT_CTRL 3
+#define NUM_MONITORED_SENSORS 4
struct ab8500_gpadc_cfg {
const struct abx500_res_to_temp *temp_tbl;
@@ -40,7 +44,8 @@ struct ab8500_gpadc_cfg {
};
struct ab8500_temp {
- struct ab8500_gpadc *gpadc;
+ struct iio_channel *aux1;
+ struct iio_channel *aux2;
struct ab8500_btemp *btemp;
struct delayed_work power_off_work;
struct ab8500_gpadc_cfg cfg;
@@ -82,15 +87,21 @@ static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp)
int voltage, ret;
struct ab8500_temp *ab8500_data = data->plat_data;
- if (sensor == BAT_CTRL) {
- *temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
- } else if (sensor == BTEMP_BALL) {
+ if (sensor == AB8500_SENSOR_BTEMP_BALL) {
*temp = ab8500_btemp_get_temp(ab8500_data->btemp);
- } else {
- voltage = ab8500_gpadc_convert(ab8500_data->gpadc, sensor);
- if (voltage < 0)
- return voltage;
-
+ } else if (sensor == AB8500_SENSOR_BAT_CTRL) {
+ *temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
+ } else if (sensor == AB8500_SENSOR_AUX1) {
+ ret = iio_read_channel_processed(ab8500_data->aux1, &voltage);
+ if (ret < 0)
+ return ret;
+ ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
+ if (ret < 0)
+ return ret;
+ } else if (sensor == AB8500_SENSOR_AUX2) {
+ ret = iio_read_channel_processed(ab8500_data->aux2, &voltage);
+ if (ret < 0)
+ return ret;
ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
if (ret < 0)
return ret;
@@ -164,10 +175,6 @@ int abx500_hwmon_init(struct abx500_temp *data)
if (!ab8500_data)
return -ENOMEM;
- ab8500_data->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- if (IS_ERR(ab8500_data->gpadc))
- return PTR_ERR(ab8500_data->gpadc);
-
ab8500_data->btemp = ab8500_btemp_get();
if (IS_ERR(ab8500_data->btemp))
return PTR_ERR(ab8500_data->btemp);
@@ -181,15 +188,25 @@ int abx500_hwmon_init(struct abx500_temp *data)
ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size;
data->plat_data = ab8500_data;
+ ab8500_data->aux1 = devm_iio_channel_get(&data->pdev->dev, "aux1");
+ if (IS_ERR(ab8500_data->aux1)) {
+ if (PTR_ERR(ab8500_data->aux1) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&data->pdev->dev, "failed to get AUX1 ADC channel\n");
+ return PTR_ERR(ab8500_data->aux1);
+ }
+ ab8500_data->aux2 = devm_iio_channel_get(&data->pdev->dev, "aux2");
+ if (IS_ERR(ab8500_data->aux2)) {
+ if (PTR_ERR(ab8500_data->aux2) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&data->pdev->dev, "failed to get AUX2 ADC channel\n");
+ return PTR_ERR(ab8500_data->aux2);
+ }
- /*
- * ADC_AUX1 and ADC_AUX2, connected to external NTC
- * BTEMP_BALL and BAT_CTRL, fixed usage
- */
- data->gpadc_addr[0] = ADC_AUX1;
- data->gpadc_addr[1] = ADC_AUX2;
- data->gpadc_addr[2] = BTEMP_BALL;
- data->gpadc_addr[3] = BAT_CTRL;
+ data->gpadc_addr[0] = AB8500_SENSOR_AUX1;
+ data->gpadc_addr[1] = AB8500_SENSOR_AUX2;
+ data->gpadc_addr[2] = AB8500_SENSOR_BTEMP_BALL;
+ data->gpadc_addr[3] = AB8500_SENSOR_BAT_CTRL;
data->monitored_sensors = NUM_MONITORED_SENSORS;
data->ops.read_sensor = ab8500_read_sensor;