summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2018-03-09 17:21:55 +0100
committerArnd Bergmann <arnd@arndb.de>2018-03-26 15:57:07 +0200
commite58af24ccd8d235c7aaa0ef0fc63a18c5d2cb88e (patch)
tree84221a9f4f56ad5ee5dcf122a859dc6db56cccd7 /drivers/i2c
parent47838669de9d9e1411fab9323f2ac1457d1944d2 (diff)
i2c: remove bfin-twi driver
The blackfin architecture is getting removed, so the twi driver can also be removed. Acked-by: Aaron Wu <aaron.wu@analog.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/Kconfig18
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c737
3 files changed, 0 insertions, 756 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 68ceac7617ff..4c0895165727 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -445,24 +445,6 @@ config I2C_BRCMSTB
If you do not need I2C interface, say N.
-config I2C_BLACKFIN_TWI
- tristate "Blackfin TWI I2C support"
- depends on BLACKFIN
- depends on !BF561 && !BF531 && !BF532 && !BF533
- help
- This is the I2C bus driver for Blackfin on-chip TWI interface.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-bfin-twi.
-
-config I2C_BLACKFIN_TWI_CLK_KHZ
- int "Blackfin TWI I2C clock (kHz)"
- depends on I2C_BLACKFIN_TWI
- range 21 400
- default 50
- help
- The unit of the TWI clock is kHz.
-
config I2C_CADENCE
tristate "Cadence I2C Controller"
depends on ARCH_ZYNQ || ARM64 || XTENSA
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 2ce8576540a2..9e475a54e36e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
obj-$(CONFIG_I2C_BCM_IPROC) += i2c-bcm-iproc.o
-obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CADENCE) += i2c-cadence.o
obj-$(CONFIG_I2C_CBUS_GPIO) += i2c-cbus-gpio.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
deleted file mode 100644
index ff3343186a82..000000000000
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * Blackfin On-Chip Two Wire Interface Driver
- *
- * Copyright 2005-2007 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include <asm/portmux.h>
-#include <asm/bfin_twi.h>
-
-/* SMBus mode*/
-#define TWI_I2C_MODE_STANDARD 1
-#define TWI_I2C_MODE_STANDARDSUB 2
-#define TWI_I2C_MODE_COMBINED 3
-#define TWI_I2C_MODE_REPEAT 4
-
-static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
- unsigned short twi_int_status)
-{
- unsigned short mast_stat = read_MASTER_STAT(iface);
-
- if (twi_int_status & XMTSERV) {
- if (iface->writeNum <= 0) {
- /* start receive immediately after complete sending in
- * combine mode.
- */
- if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | MDIR);
- else if (iface->manual_stop)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | STOP);
- else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg + 1 < iface->msg_num) {
- if (iface->pmsg[iface->cur_msg + 1].flags &
- I2C_M_RD)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) |
- MDIR);
- else
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) &
- ~MDIR);
- }
- }
- /* Transmit next data */
- while (iface->writeNum > 0 &&
- (read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
- write_XMT_DATA8(iface, *(iface->transPtr++));
- iface->writeNum--;
- }
- }
- if (twi_int_status & RCVSERV) {
- while (iface->readNum > 0 &&
- (read_FIFO_STAT(iface) & RCVSTAT)) {
- /* Receive next data */
- *(iface->transPtr) = read_RCV_DATA8(iface);
- if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
- /* Change combine mode into sub mode after
- * read first data.
- */
- iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
- /* Get read number from first byte in block
- * combine mode.
- */
- if (iface->readNum == 1 && iface->manual_stop)
- iface->readNum = *iface->transPtr + 1;
- }
- iface->transPtr++;
- iface->readNum--;
- }
-
- if (iface->readNum == 0) {
- if (iface->manual_stop) {
- /* Temporary workaround to avoid possible bus stall -
- * Flush FIFO before issuing the STOP condition
- */
- read_RCV_DATA16(iface);
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | STOP);
- } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg + 1 < iface->msg_num) {
- if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | MDIR);
- else
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) & ~MDIR);
- }
- }
- }
- if (twi_int_status & MERR) {
- write_INT_MASK(iface, 0);
- write_MASTER_STAT(iface, 0x3e);
- write_MASTER_CTL(iface, 0);
- iface->result = -EIO;
-
- if (mast_stat & LOSTARB)
- dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
- if (mast_stat & ANAK)
- dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
- if (mast_stat & DNAK)
- dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
- if (mast_stat & BUFRDERR)
- dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
- if (mast_stat & BUFWRERR)
- dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
-
- /* Faulty slave devices, may drive SDA low after a transfer
- * finishes. To release the bus this code generates up to 9
- * extra clocks until SDA is released.
- */
-
- if (read_MASTER_STAT(iface) & SDASEN) {
- int cnt = 9;
- do {
- write_MASTER_CTL(iface, SCLOVR);
- udelay(6);
- write_MASTER_CTL(iface, 0);
- udelay(6);
- } while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
-
- write_MASTER_CTL(iface, SDAOVR | SCLOVR);
- udelay(6);
- write_MASTER_CTL(iface, SDAOVR);
- udelay(6);
- write_MASTER_CTL(iface, 0);
- }
-
- /* If it is a quick transfer, only address without data,
- * not an err, return 1.
- */
- if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
- iface->transPtr == NULL &&
- (twi_int_status & MCOMP) && (mast_stat & DNAK))
- iface->result = 1;
-
- complete(&iface->complete);
- return;
- }
- if (twi_int_status & MCOMP) {
- if (twi_int_status & (XMTSERV | RCVSERV) &&
- (read_MASTER_CTL(iface) & MEN) == 0 &&
- (iface->cur_mode == TWI_I2C_MODE_REPEAT ||
- iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
- iface->result = -1;
- write_INT_MASK(iface, 0);
- write_MASTER_CTL(iface, 0);
- } else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
- if (iface->readNum == 0) {
- /* set the read number to 1 and ask for manual
- * stop in block combine mode
- */
- iface->readNum = 1;
- iface->manual_stop = 1;
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | (0xff << 6));
- } else {
- /* set the readd number in other
- * combine mode.
- */
- write_MASTER_CTL(iface,
- (read_MASTER_CTL(iface) &
- (~(0xff << 6))) |
- (iface->readNum << 6));
- }
- /* remove restart bit and enable master receive */
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) & ~RSTART);
- } else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg + 1 < iface->msg_num) {
- iface->cur_msg++;
- iface->transPtr = iface->pmsg[iface->cur_msg].buf;
- iface->writeNum = iface->readNum =
- iface->pmsg[iface->cur_msg].len;
- /* Set Transmit device address */
- write_MASTER_ADDR(iface,
- iface->pmsg[iface->cur_msg].addr);
- if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
- iface->read_write = I2C_SMBUS_READ;
- else {
- iface->read_write = I2C_SMBUS_WRITE;
- /* Transmit first data */
- if (iface->writeNum > 0) {
- write_XMT_DATA8(iface,
- *(iface->transPtr++));
- iface->writeNum--;
- }
- }
-
- if (iface->pmsg[iface->cur_msg].len <= 255) {
- write_MASTER_CTL(iface,
- (read_MASTER_CTL(iface) &
- (~(0xff << 6))) |
- (iface->pmsg[iface->cur_msg].len << 6));
- iface->manual_stop = 0;
- } else {
- write_MASTER_CTL(iface,
- (read_MASTER_CTL(iface) |
- (0xff << 6)));
- iface->manual_stop = 1;
- }
- /* remove restart bit before last message */
- if (iface->cur_msg + 1 == iface->msg_num)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) & ~RSTART);
- } else {
- iface->result = 1;
- write_INT_MASK(iface, 0);
- write_MASTER_CTL(iface, 0);
- }
- complete(&iface->complete);
- }
-}
-
-/* Interrupt handler */
-static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
-{
- struct bfin_twi_iface *iface = dev_id;
- unsigned long flags;
- unsigned short twi_int_status;
-
- spin_lock_irqsave(&iface->lock, flags);
- while (1) {
- twi_int_status = read_INT_STAT(iface);
- if (!twi_int_status)
- break;
- /* Clear interrupt status */
- write_INT_STAT(iface, twi_int_status);
- bfin_twi_handle_interrupt(iface, twi_int_status);
- }
- spin_unlock_irqrestore(&iface->lock, flags);
- return IRQ_HANDLED;
-}
-
-/*
- * One i2c master transfer
- */
-static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs, int num)
-{
- struct bfin_twi_iface *iface = adap->algo_data;
- struct i2c_msg *pmsg;
- int rc = 0;
-
- if (!(read_CONTROL(iface) & TWI_ENA))
- return -ENXIO;
-
- if (read_MASTER_STAT(iface) & BUSBUSY)
- return -EAGAIN;
-
- iface->pmsg = msgs;
- iface->msg_num = num;
- iface->cur_msg = 0;
-
- pmsg = &msgs[0];
- if (pmsg->flags & I2C_M_TEN) {
- dev_err(&adap->dev, "10 bits addr not supported!\n");
- return -EINVAL;
- }
-
- if (iface->msg_num > 1)
- iface->cur_mode = TWI_I2C_MODE_REPEAT;
- iface->manual_stop = 0;
- iface->transPtr = pmsg->buf;
- iface->writeNum = iface->readNum = pmsg->len;
- iface->result = 0;
- init_completion(&(iface->complete));
- /* Set Transmit device address */
- write_MASTER_ADDR(iface, pmsg->addr);
-
- /* FIFO Initiation. Data in FIFO should be
- * discarded before start a new operation.
- */
- write_FIFO_CTL(iface, 0x3);
- write_FIFO_CTL(iface, 0);
-
- if (pmsg->flags & I2C_M_RD)
- iface->read_write = I2C_SMBUS_READ;
- else {
- iface->read_write = I2C_SMBUS_WRITE;
- /* Transmit first data */
- if (iface->writeNum > 0) {
- write_XMT_DATA8(iface, *(iface->transPtr++));
- iface->writeNum--;
- }
- }
-
- /* clear int stat */
- write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
-
- /* Interrupt mask . Enable XMT, RCV interrupt */
- write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
-
- if (pmsg->len <= 255)
- write_MASTER_CTL(iface, pmsg->len << 6);
- else {
- write_MASTER_CTL(iface, 0xff << 6);
- iface->manual_stop = 1;
- }
-
- /* Master enable */
- write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
- (iface->msg_num > 1 ? RSTART : 0) |
- ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
- ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
-
- while (!iface->result) {
- if (!wait_for_completion_timeout(&iface->complete,
- adap->timeout)) {
- iface->result = -1;
- dev_err(&adap->dev, "master transfer timeout\n");
- }
- }
-
- if (iface->result == 1)
- rc = iface->cur_msg + 1;
- else
- rc = iface->result;
-
- return rc;
-}
-
-/*
- * Generic i2c master transfer entrypoint
- */
-static int bfin_twi_master_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs, int num)
-{
- return bfin_twi_do_master_xfer(adap, msgs, num);
-}
-
-/*
- * One I2C SMBus transfer
- */
-int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data *data)
-{
- struct bfin_twi_iface *iface = adap->algo_data;
- int rc = 0;
-
- if (!(read_CONTROL(iface) & TWI_ENA))
- return -ENXIO;
-
- if (read_MASTER_STAT(iface) & BUSBUSY)
- return -EAGAIN;
-
- iface->writeNum = 0;
- iface->readNum = 0;
-
- /* Prepare datas & select mode */
- switch (size) {
- case I2C_SMBUS_QUICK:
- iface->transPtr = NULL;
- iface->cur_mode = TWI_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE:
- if (data == NULL)
- iface->transPtr = NULL;
- else {
- if (read_write == I2C_SMBUS_READ)
- iface->readNum = 1;
- else
- iface->writeNum = 1;
- iface->transPtr = &data->byte;
- }
- iface->cur_mode = TWI_I2C_MODE_STANDARD;
- break;
- case I2C_SMBUS_BYTE_DATA:
- if (read_write == I2C_SMBUS_READ) {
- iface->readNum = 1;
- iface->cur_mode = TWI_I2C_MODE_COMBINED;
- } else {
- iface->writeNum = 1;
- iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
- }
- iface->transPtr = &data->byte;
- break;
- case I2C_SMBUS_WORD_DATA:
- if (read_write == I2C_SMBUS_READ) {
- iface->readNum = 2;
- iface->cur_mode = TWI_I2C_MODE_COMBINED;
- } else {
- iface->writeNum = 2;
- iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
- }
- iface->transPtr = (u8 *)&data->word;
- break;
- case I2C_SMBUS_PROC_CALL:
- iface->writeNum = 2;
- iface->readNum = 2;
- iface->cur_mode = TWI_I2C_MODE_COMBINED;
- iface->transPtr = (u8 *)&data->word;
- break;
- case I2C_SMBUS_BLOCK_DATA:
- if (read_write == I2C_SMBUS_READ) {
- iface->readNum = 0;
- iface->cur_mode = TWI_I2C_MODE_COMBINED;
- } else {
- iface->writeNum = data->block[0] + 1;
- iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
- }
- iface->transPtr = data->block;
- break;
- case I2C_SMBUS_I2C_BLOCK_DATA:
- if (read_write == I2C_SMBUS_READ) {
- iface->readNum = data->block[0];
- iface->cur_mode = TWI_I2C_MODE_COMBINED;
- } else {
- iface->writeNum = data->block[0];
- iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
- }
- iface->transPtr = (u8 *)&data->block[1];
- break;
- default:
- return -1;
- }
-
- iface->result = 0;
- iface->manual_stop = 0;
- iface->read_write = read_write;
- iface->command = command;
- init_completion(&(iface->complete));
-
- /* FIFO Initiation. Data in FIFO should be discarded before
- * start a new operation.
- */
- write_FIFO_CTL(iface, 0x3);
- write_FIFO_CTL(iface, 0);
-
- /* clear int stat */
- write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
-
- /* Set Transmit device address */
- write_MASTER_ADDR(iface, addr);
-
- switch (iface->cur_mode) {
- case TWI_I2C_MODE_STANDARDSUB:
- write_XMT_DATA8(iface, iface->command);
- write_INT_MASK(iface, MCOMP | MERR |
- ((iface->read_write == I2C_SMBUS_READ) ?
- RCVSERV : XMTSERV));
-
- if (iface->writeNum + 1 <= 255)
- write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
- else {
- write_MASTER_CTL(iface, 0xff << 6);
- iface->manual_stop = 1;
- }
- /* Master enable */
- write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
- ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
- break;
- case TWI_I2C_MODE_COMBINED:
- write_XMT_DATA8(iface, iface->command);
- write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
-
- if (iface->writeNum > 0)
- write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
- else
- write_MASTER_CTL(iface, 0x1 << 6);
- /* Master enable */
- write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
- ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
- break;
- default:
- write_MASTER_CTL(iface, 0);
- if (size != I2C_SMBUS_QUICK) {
- /* Don't access xmit data register when this is a
- * read operation.
- */
- if (iface->read_write != I2C_SMBUS_READ) {
- if (iface->writeNum > 0) {
- write_XMT_DATA8(iface,
- *(iface->transPtr++));
- if (iface->writeNum <= 255)
- write_MASTER_CTL(iface,
- iface->writeNum << 6);
- else {
- write_MASTER_CTL(iface,
- 0xff << 6);
- iface->manual_stop = 1;
- }
- iface->writeNum--;
- } else {
- write_XMT_DATA8(iface, iface->command);
- write_MASTER_CTL(iface, 1 << 6);
- }
- } else {
- if (iface->readNum > 0 && iface->readNum <= 255)
- write_MASTER_CTL(iface,
- iface->readNum << 6);
- else if (iface->readNum > 255) {
- write_MASTER_CTL(iface, 0xff << 6);
- iface->manual_stop = 1;
- } else
- break;
- }
- }
- write_INT_MASK(iface, MCOMP | MERR |
- ((iface->read_write == I2C_SMBUS_READ) ?
- RCVSERV : XMTSERV));
-
- /* Master enable */
- write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
- ((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
- ((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
- break;
- }
-
- while (!iface->result) {
- if (!wait_for_completion_timeout(&iface->complete,
- adap->timeout)) {
- iface->result = -1;
- dev_err(&adap->dev, "smbus transfer timeout\n");
- }
- }
-
- rc = (iface->result >= 0) ? 0 : -1;
-
- return rc;
-}
-
-/*
- * Generic I2C SMBus transfer entrypoint
- */
-int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
- unsigned short flags, char read_write,
- u8 command, int size, union i2c_smbus_data *data)
-{
- return bfin_twi_do_smbus_xfer(adap, addr, flags,
- read_write, command, size, data);
-}
-
-/*
- * Return what the adapter supports
- */
-static u32 bfin_twi_functionality(struct i2c_adapter *adap)
-{
- return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
- I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
-}
-
-static const struct i2c_algorithm bfin_twi_algorithm = {
- .master_xfer = bfin_twi_master_xfer,
- .smbus_xfer = bfin_twi_smbus_xfer,
- .functionality = bfin_twi_functionality,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int i2c_bfin_twi_suspend(struct device *dev)
-{
- struct bfin_twi_iface *iface = dev_get_drvdata(dev);
-
- iface->saved_clkdiv = read_CLKDIV(iface);
- iface->saved_control = read_CONTROL(iface);
-
- free_irq(iface->irq, iface);
-
- /* Disable TWI */
- write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
-
- return 0;
-}
-
-static int i2c_bfin_twi_resume(struct device *dev)
-{
- struct bfin_twi_iface *iface = dev_get_drvdata(dev);
-
- int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
- 0, to_platform_device(dev)->name, iface);
- if (rc) {
- dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
- return -ENODEV;
- }
-
- /* Resume TWI interface clock as specified */
- write_CLKDIV(iface, iface->saved_clkdiv);
-
- /* Resume TWI */
- write_CONTROL(iface, iface->saved_control);
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
- i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
-#define I2C_BFIN_TWI_PM_OPS (&i2c_bfin_twi_pm)
-#else
-#define I2C_BFIN_TWI_PM_OPS NULL
-#endif
-
-static int i2c_bfin_twi_probe(struct platform_device *pdev)
-{
- struct bfin_twi_iface *iface;
- struct i2c_adapter *p_adap;
- struct resource *res;
- int rc;
- unsigned int clkhilow;
-
- iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
- GFP_KERNEL);
- if (!iface) {
- dev_err(&pdev->dev, "Cannot allocate memory\n");
- return -ENOMEM;
- }
-
- spin_lock_init(&(iface->lock));
-
- /* Find and map our resources */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(iface->regs_base)) {
- dev_err(&pdev->dev, "Cannot map IO\n");
- return PTR_ERR(iface->regs_base);
- }
-
- iface->irq = platform_get_irq(pdev, 0);
- if (iface->irq < 0) {
- dev_err(&pdev->dev, "No IRQ specified\n");
- return -ENOENT;
- }
-
- p_adap = &iface->adap;
- p_adap->nr = pdev->id;
- strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
- p_adap->algo = &bfin_twi_algorithm;
- p_adap->algo_data = iface;
- p_adap->class = I2C_CLASS_DEPRECATED;
- p_adap->dev.parent = &pdev->dev;
- p_adap->timeout = 5 * HZ;
- p_adap->retries = 3;
-
- rc = peripheral_request_list(
- dev_get_platdata(&pdev->dev),
- "i2c-bfin-twi");
- if (rc) {
- dev_err(&pdev->dev, "Can't setup pin mux!\n");
- return -EBUSY;
- }
-
- rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
- 0, pdev->name, iface);
- if (rc) {
- dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
- rc = -ENODEV;
- goto out_error;
- }
-
- /* Set TWI internal clock as 10MHz */
- write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
-
- /*
- * We will not end up with a CLKDIV=0 because no one will specify
- * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
- */
- clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
-
- /* Set Twi interface clock as specified */
- write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
-
- /* Enable TWI */
- write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
-
- rc = i2c_add_numbered_adapter(p_adap);
- if (rc < 0)
- goto out_error;
-
- platform_set_drvdata(pdev, iface);
-
- dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Controller, "
- "regs_base@%p\n", iface->regs_base);
-
- return 0;
-
-out_error:
- peripheral_free_list(dev_get_platdata(&pdev->dev));
- return rc;
-}
-
-static int i2c_bfin_twi_remove(struct platform_device *pdev)
-{
- struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
-
- i2c_del_adapter(&(iface->adap));
- peripheral_free_list(dev_get_platdata(&pdev->dev));
-
- return 0;
-}
-
-static struct platform_driver i2c_bfin_twi_driver = {
- .probe = i2c_bfin_twi_probe,
- .remove = i2c_bfin_twi_remove,
- .driver = {
- .name = "i2c-bfin-twi",
- .pm = I2C_BFIN_TWI_PM_OPS,
- },
-};
-
-static int __init i2c_bfin_twi_init(void)
-{
- return platform_driver_register(&i2c_bfin_twi_driver);
-}
-
-static void __exit i2c_bfin_twi_exit(void)
-{
- platform_driver_unregister(&i2c_bfin_twi_driver);
-}
-
-subsys_initcall(i2c_bfin_twi_init);
-module_exit(i2c_bfin_twi_exit);
-
-MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
-MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Controller Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:i2c-bfin-twi");