summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorAndrew Jackson <Andrew.Jackson@arm.com>2014-11-07 12:10:44 +0000
committerWolfram Sang <wsa@the-dreams.de>2014-11-21 08:06:32 +0100
commitd39f77b06a712fcba6185a20bb209e357923d980 (patch)
tree96a079b1aec111f9a8c5f526f1197c3ceebbc296 /drivers/i2c
parent27caca9d2e01c92b26d0690f065aad093fea01c7 (diff)
i2c: designware: prevent early stop on TX FIFO empty
If the Designware core is configured with IC_EMPTYFIFO_HOLD_MASTER_EN set to zero, allowing the TX FIFO to become empty causes a STOP condition to be generated on the I2C bus. If the transmit FIFO threshold is set too high, an erroneous STOP condition can be generated on long transfers - particularly where the interrupt latency is extended. Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c2
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index edca99dbba23..23628b7bfb8d 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -359,7 +359,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
}
/* Configure Tx/Rx FIFO threshold levels */
- dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+ dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
dw_writel(dev, 0, DW_IC_RX_TL);
/* configure the i2c master */