summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-floppy.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-13 21:39:32 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-13 21:39:32 +0200
commitbaf08f0be6d986521bb2fbdc7af51fc4847da734 (patch)
tree5ac765703ad79edeafc6eec39fe42850bd6b5dc6 /drivers/ide/ide-floppy.c
parentaa5d2de7b080873f6d9ac3aede423c9713bf0caa (diff)
ide: make ide_transfer_pc() static
* Move ->ticks field from struct ide_floppy_obj to ide_drive_t. * Move idefloppy_transfer_pc() to ide-atapi.c and make ide_transfer_pc() use it. * Always use ide_transfer_pc as a handler in ide_issue_pc(). * Remove no longer used idefloppy_start_pc_transfer(), ide*_transfer_pc() and 'handler' argument from ide_issue_pc(). * Make ide_transfer_pc() static. While at it: * idefloppy_transfer_pc() -> ide_delayed_transfer_pc() * IDEFLOPPY_TICKS_DELAY -> IDEFLOPPY_PC_DELAY * ->ticks -> ->pc_delay There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/ide-floppy.c')
-rw-r--r--drivers/ide/ide-floppy.c72
1 files changed, 8 insertions, 64 deletions
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 7be3cd5daa9d..2a34f1ad2284 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -73,7 +73,11 @@
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03
-#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
+/*
+ * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
+ * was apparently being deasserted before the unit was ready to receive data.
+ */
+#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101
@@ -193,51 +197,6 @@ static void ide_floppy_callback(ide_drive_t *drive, int dsc)
idefloppy_end_request(drive, uptodate, 0);
}
-/*
- * What we have here is a classic case of a top half / bottom half interrupt
- * service routine. In interrupt mode, the device sends an interrupt to signal
- * that it is ready to receive a packet. However, we need to delay about 2-3
- * ticks before issuing the packet or we gets in trouble.
- */
-static int idefloppy_transfer_pc(ide_drive_t *drive)
-{
- /* Send the actual packet */
- drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
-
- /* Timeout for the packet command */
- return WAIT_FLOPPY_CMD;
-}
-
-/*
- * Called as an interrupt (or directly). When the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks later in
- * transfer_pc.
- */
-static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- ide_expiry_t *expiry;
- unsigned int timeout;
-
- /*
- * The following delay solves a problem with ATAPI Zip 100 drives
- * where the Busy flag was apparently being deasserted before the
- * unit was ready to receive data. This was happening on a
- * 1200 MHz Athlon system. 10/26/01 25msec is too short,
- * 40 and 50msec work well. ide_pc_intr will not be actually
- * used until after the packet is moved in about 50 msec.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = floppy->ticks;
- expiry = &idefloppy_transfer_pc;
- } else {
- timeout = WAIT_FLOPPY_CMD;
- expiry = NULL;
- }
-
- return ide_transfer_pc(drive, timeout, expiry);
-}
-
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc)
{
@@ -281,8 +240,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->retries++;
- return ide_issue_pc(drive, idefloppy_start_pc_transfer,
- WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
@@ -597,21 +555,7 @@ static sector_t idefloppy_capacity(ide_drive_t *drive)
ide_devset_rw_field(bios_cyl, bios_cyl);
ide_devset_rw_field(bios_head, bios_head);
ide_devset_rw_field(bios_sect, bios_sect);
-
-static int get_ticks(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- return floppy->ticks;
-}
-
-static int set_ticks(ide_drive_t *drive, int arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- floppy->ticks = arg;
- return 0;
-}
-
-IDE_DEVSET(ticks, DS_SYNC, get_ticks, set_ticks);
+ide_devset_rw_field(ticks, pc_delay);
static const struct ide_proc_devset idefloppy_settings[] = {
IDE_PROC_DEVSET(bios_cyl, 0, 1023),
@@ -647,7 +591,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
- floppy->ticks = IDEFLOPPY_TICKS_DELAY;
+ drive->pc_delay = IDEFLOPPY_PC_DELAY;
blk_queue_max_sectors(drive->queue, 64);
}