Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.7-rc1. Included in here are:

   - IIO subsystem driver updates and additions (largest part of this
     pull request)

   - FPGA subsystem driver updates

   - Counter subsystem driver updates

   - ICC subsystem driver updates

   - extcon subsystem driver updates

   - mei driver updates and additions

   - nvmem subsystem driver updates and additions

   - comedi subsystem dependency fixes

   - parport driver fixups

   - cdx subsystem driver and core updates

   - splice support for /dev/zero and /dev/full

   - other smaller driver cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
  cdx: add sysfs for subsystem, class and revision
  cdx: add sysfs for bus reset
  cdx: add support for bus enable and disable
  cdx: Register cdx bus as a device on cdx subsystem
  cdx: Create symbol namespaces for cdx subsystem
  cdx: Introduce lock to protect controller ops
  cdx: Remove cdx controller list from cdx bus system
  dts: ti: k3-am625-beagleplay: Add beaglecc1352
  greybus: Add BeaglePlay Linux Driver
  dt-bindings: net: Add ti,cc1352p7
  dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
  dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
  Revert "nvmem: add new config option"
  MAINTAINERS: coresight: Add missing Coresight files
  misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
  firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
  uacce: make uacce_class constant
  ocxl: make ocxl_class constant
  cxl: make cxl_class constant
  misc: phantom: make phantom_class constant
  ...

1 files changed, 11 insertions, 16 deletions

diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index 13439f52d26d..ab4fccb24b6c 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -926,7 +926,6 @@ static int bma180_probe(struct i2c_client *client)
 	struct device *dev = &client->dev;
 	struct bma180_data *data;
 	struct iio_dev *indio_dev;
-	enum chip_ids chip;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
@@ -936,11 +935,7 @@ static int bma180_probe(struct i2c_client *client)
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
-	if (client->dev.of_node)
-		chip = (uintptr_t)of_device_get_match_data(dev);
-	else
-		chip = id->driver_data;
-	data->part_info = &bma180_part_info[chip];
+	data->part_info = i2c_get_match_data(client);
 
 	ret = iio_read_mount_matrix(dev, &data->orientation);
 	if (ret)
@@ -1092,11 +1087,11 @@ static int bma180_resume(struct device *dev)
 static DEFINE_SIMPLE_DEV_PM_OPS(bma180_pm_ops, bma180_suspend, bma180_resume);
 
 static const struct i2c_device_id bma180_ids[] = {
-	{ "bma023", BMA023 },
-	{ "bma150", BMA150 },
-	{ "bma180", BMA180 },
-	{ "bma250", BMA250 },
-	{ "smb380", BMA150 },
+	{ "bma023", (kernel_ulong_t)&bma180_part_info[BMA023] },
+	{ "bma150", (kernel_ulong_t)&bma180_part_info[BMA150] },
+	{ "bma180", (kernel_ulong_t)&bma180_part_info[BMA180] },
+	{ "bma250", (kernel_ulong_t)&bma180_part_info[BMA250] },
+	{ "smb380", (kernel_ulong_t)&bma180_part_info[BMA150] },
 	{ }
 };
 
@@ -1105,23 +1100,23 @@ MODULE_DEVICE_TABLE(i2c, bma180_ids);
 static const struct of_device_id bma180_of_match[] = {
 	{
 		.compatible = "bosch,bma023",
-		.data = (void *)BMA023
+		.data = &bma180_part_info[BMA023]
 	},
 	{
 		.compatible = "bosch,bma150",
-		.data = (void *)BMA150
+		.data = &bma180_part_info[BMA150]
 	},
 	{
 		.compatible = "bosch,bma180",
-		.data = (void *)BMA180
+		.data = &bma180_part_info[BMA180]
 	},
 	{
 		.compatible = "bosch,bma250",
-		.data = (void *)BMA250
+		.data = &bma180_part_info[BMA250]
 	},
 	{
 		.compatible = "bosch,smb380",
-		.data = (void *)BMA150
+		.data = &bma180_part_info[BMA150]
 	},
 	{ }
 };