Merge tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.6-rc1.

  Lots of little things here, over 1600 patches or so.  Notable is all
  of the good Lustre work happening, those developers have finally woken
  up and are cleaning up their code greatly.  The Outreachy intern
  application process is also happening, which brought in another 400 or
  so patches.  Full details are in the very long shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits)
  staging: lustre: fix aligments in lnet selftest
  staging: lustre: report minimum of two buffers for LNet selftest load test
  staging: lustre: test for proper errno code in lstcon_rpc_trans_abort
  staging: lustre: filter remaining extra spacing for lnet selftest
  staging: lustre: remove extra spacing when setting variable for lnet selftest
  staging: lustre: remove extra spacing of variable declartions for lnet selftest
  staging: lustre: fix spacing issues checkpatch reported in lnet selftest
  staging: lustre: remove returns in void function for lnet selftest
  staging: lustre: fix bogus lst errors for lnet selftest
  staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc
  staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc
  staging: android: ion: fix up file mode
  staging: ion: debugfs invalid gfp mask
  staging: rts5208: Replace pci_enable_device with pcim_enable_device
  Staging: ieee80211: Place constant on right side of the test.
  staging: speakup: Replace del_timer with del_timer_sync
  staging: lowmemorykiller: fix 2 checks that checkpatch complained
  staging: mt29f_spinand: Drop void pointer cast
  staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN
  staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED
  ...

12 files changed, 3339 insertions, 106 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 283ded7747a9..932de1f9d1e7 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -131,6 +131,16 @@ config AT91_ADC
 	  To compile this driver as a module, choose M here: the module will be
 	  called at91_adc.
 
+config AT91_SAMA5D2_ADC
+	tristate "Atmel AT91 SAMA5D2 ADC"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  Say yes here to build support for Atmel SAMA5D2 ADC which is
+	  available on SAMA5D2 SoC family.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called at91-sama5d2_adc.
+
 config AXP288_ADC
 	tristate "X-Powers AXP288 ADC driver"
 	depends on MFD_AXP20X
@@ -267,11 +277,11 @@ config MCP320X
 	  called mcp320x.
 
 config MCP3422
-	tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
+	tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver"
 	depends on I2C
 	help
-	  Say yes here to build support for Microchip Technology's
-	  MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
+	  Say yes here to build support for Microchip Technology's MCP3421
+	  MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428
 	  analog to digital converters.
 
 	  This driver can also be built as a module. If so, the module will be
@@ -287,6 +297,20 @@ config MEN_Z188_ADC
 	  This driver can also be built as a module. If so, the module will be
 	  called men_z188_adc.
 
+config MXS_LRADC
+        tristate "Freescale i.MX23/i.MX28 LRADC"
+        depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
+        depends on INPUT
+        select STMP_DEVICE
+        select IIO_BUFFER
+        select IIO_TRIGGERED_BUFFER
+        help
+          Say yes here to build support for i.MX23/i.MX28 LRADC convertor
+          built into these chips.
+
+          To compile this driver as a module, choose M here: the
+          module will be called mxs-lradc.
+
 config NAU7802
 	tristate "Nuvoton NAU7802 ADC driver"
 	depends on I2C
@@ -352,6 +376,16 @@ config TI_ADC081C
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc081c.
 
+config TI_ADC0832
+	tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838"
+	depends on SPI
+	help
+	  If you say yes here you get support for Texas Instruments ADC0831,
+	  ADC0832, ADC0834, ADC0838 ADC chips.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-adc0832.
+
 config TI_ADC128S052
 	tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021"
 	depends on SPI
@@ -362,6 +396,19 @@ config TI_ADC128S052
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc128s052.
 
+config TI_ADS1015
+	tristate "Texas Instruments ADS1015 ADC"
+	depends on I2C && !SENSORS_ADS1015
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for Texas Instruments ADS1015
+	  ADC chip.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads1015.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 6435780e9b71..b1aa456e6af3 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o
 obj-$(CONFIG_AD7887) += ad7887.o
 obj-$(CONFIG_AD799X) += ad799x.o
 obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
 obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
 obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
 obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
@@ -28,13 +29,16 @@ obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
+obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
+obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
+obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
 obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
new file mode 100644
index 000000000000..dbee13ad33a3
--- /dev/null
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -0,0 +1,508 @@
+/*
+ * Atmel ADC driver for SAMA5D2 devices and compatible.
+ *
+ * Copyright (C) 2015 Atmel,
+ *               2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/regulator/consumer.h>
+
+/* Control Register */
+#define AT91_SAMA5D2_CR		0x00
+/* Software Reset */
+#define	AT91_SAMA5D2_CR_SWRST		BIT(0)
+/* Start Conversion */
+#define	AT91_SAMA5D2_CR_START		BIT(1)
+/* Touchscreen Calibration */
+#define	AT91_SAMA5D2_CR_TSCALIB		BIT(2)
+/* Comparison Restart */
+#define	AT91_SAMA5D2_CR_CMPRST		BIT(4)
+
+/* Mode Register */
+#define AT91_SAMA5D2_MR		0x04
+/* Trigger Selection */
+#define	AT91_SAMA5D2_MR_TRGSEL(v)	((v) << 1)
+/* ADTRG */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG0	0
+/* TIOA0 */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG1	1
+/* TIOA1 */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG2	2
+/* TIOA2 */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG3	3
+/* PWM event line 0 */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG4	4
+/* PWM event line 1 */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG5	5
+/* TIOA3 */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG6	6
+/* RTCOUT0 */
+#define	AT91_SAMA5D2_MR_TRGSEL_TRIG7	7
+/* Sleep Mode */
+#define	AT91_SAMA5D2_MR_SLEEP		BIT(5)
+/* Fast Wake Up */
+#define	AT91_SAMA5D2_MR_FWUP		BIT(6)
+/* Prescaler Rate Selection */
+#define	AT91_SAMA5D2_MR_PRESCAL(v)	((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET)
+#define	AT91_SAMA5D2_MR_PRESCAL_OFFSET	8
+#define	AT91_SAMA5D2_MR_PRESCAL_MAX	0xff
+/* Startup Time */
+#define	AT91_SAMA5D2_MR_STARTUP(v)	((v) << 16)
+/* Analog Change */
+#define	AT91_SAMA5D2_MR_ANACH		BIT(23)
+/* Tracking Time */
+#define	AT91_SAMA5D2_MR_TRACKTIM(v)	((v) << 24)
+#define	AT91_SAMA5D2_MR_TRACKTIM_MAX	0xff
+/* Transfer Time */
+#define	AT91_SAMA5D2_MR_TRANSFER(v)	((v) << 28)
+#define	AT91_SAMA5D2_MR_TRANSFER_MAX	0x3
+/* Use Sequence Enable */
+#define	AT91_SAMA5D2_MR_USEQ		BIT(31)
+
+/* Channel Sequence Register 1 */
+#define AT91_SAMA5D2_SEQR1	0x08
+/* Channel Sequence Register 2 */
+#define AT91_SAMA5D2_SEQR2	0x0c
+/* Channel Enable Register */
+#define AT91_SAMA5D2_CHER	0x10
+/* Channel Disable Register */
+#define AT91_SAMA5D2_CHDR	0x14
+/* Channel Status Register */
+#define AT91_SAMA5D2_CHSR	0x18
+/* Last Converted Data Register */
+#define AT91_SAMA5D2_LCDR	0x20
+/* Interrupt Enable Register */
+#define AT91_SAMA5D2_IER		0x24
+/* Interrupt Disable Register */
+#define AT91_SAMA5D2_IDR		0x28
+/* Interrupt Mask Register */
+#define AT91_SAMA5D2_IMR		0x2c
+/* Interrupt Status Register */
+#define AT91_SAMA5D2_ISR		0x30
+/* Last Channel Trigger Mode Register */
+#define AT91_SAMA5D2_LCTMR	0x34
+/* Last Channel Compare Window Register */
+#define AT91_SAMA5D2_LCCWR	0x38
+/* Overrun Status Register */
+#define AT91_SAMA5D2_OVER	0x3c
+/* Extended Mode Register */
+#define AT91_SAMA5D2_EMR		0x40
+/* Compare Window Register */
+#define AT91_SAMA5D2_CWR		0x44
+/* Channel Gain Register */
+#define AT91_SAMA5D2_CGR		0x48
+/* Channel Offset Register */
+#define AT91_SAMA5D2_COR		0x4c
+/* Channel Data Register 0 */
+#define AT91_SAMA5D2_CDR0	0x50
+/* Analog Control Register */
+#define AT91_SAMA5D2_ACR		0x94
+/* Touchscreen Mode Register */
+#define AT91_SAMA5D2_TSMR	0xb0
+/* Touchscreen X Position Register */
+#define AT91_SAMA5D2_XPOSR	0xb4
+/* Touchscreen Y Position Register */
+#define AT91_SAMA5D2_YPOSR	0xb8
+/* Touchscreen Pressure Register */
+#define AT91_SAMA5D2_PRESSR	0xbc
+/* Trigger Register */
+#define AT91_SAMA5D2_TRGR	0xc0
+/* Correction Select Register */
+#define AT91_SAMA5D2_COSR	0xd0
+/* Correction Value Register */
+#define AT91_SAMA5D2_CVR		0xd4
+/* Channel Error Correction Register */
+#define AT91_SAMA5D2_CECR	0xd8
+/* Write Protection Mode Register */
+#define AT91_SAMA5D2_WPMR	0xe4
+/* Write Protection Status Register */
+#define AT91_SAMA5D2_WPSR	0xe8
+/* Version Register */
+#define AT91_SAMA5D2_VERSION	0xfc
+
+#define AT91_AT91_SAMA5D2_CHAN(num, addr)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.channel = num,						\
+		.address = addr,					\
+		.scan_type = {						\
+			.sign = 'u',					\
+			.realbits = 12,					\
+		},							\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.datasheet_name = "CH"#num,				\
+		.indexed = 1,						\
+	}
+
+#define at91_adc_readl(st, reg)		readl_relaxed(st->base + reg)
+#define at91_adc_writel(st, reg, val)	writel_relaxed(val, st->base + reg)
+
+struct at91_adc_soc_info {
+	unsigned			startup_time;
+	unsigned			min_sample_rate;
+	unsigned			max_sample_rate;
+};
+
+struct at91_adc_state {
+	void __iomem			*base;
+	int				irq;
+	struct clk			*per_clk;
+	struct regulator		*reg;
+	struct regulator		*vref;
+	int				vref_uv;
+	const struct iio_chan_spec	*chan;
+	bool				conversion_done;
+	u32				conversion_value;
+	struct at91_adc_soc_info	soc_info;
+	wait_queue_head_t		wq_data_available;
+	/*
+	 * lock to prevent concurrent 'single conversion' requests through
+	 * sysfs.
+	 */
+	struct mutex			lock;
+};
+
+static const struct iio_chan_spec at91_adc_channels[] = {
+	AT91_AT91_SAMA5D2_CHAN(0, 0x50),
+	AT91_AT91_SAMA5D2_CHAN(1, 0x54),
+	AT91_AT91_SAMA5D2_CHAN(2, 0x58),
+	AT91_AT91_SAMA5D2_CHAN(3, 0x5c),
+	AT91_AT91_SAMA5D2_CHAN(4, 0x60),
+	AT91_AT91_SAMA5D2_CHAN(5, 0x64),
+	AT91_AT91_SAMA5D2_CHAN(6, 0x68),
+	AT91_AT91_SAMA5D2_CHAN(7, 0x6c),
+	AT91_AT91_SAMA5D2_CHAN(8, 0x70),
+	AT91_AT91_SAMA5D2_CHAN(9, 0x74),
+	AT91_AT91_SAMA5D2_CHAN(10, 0x78),
+	AT91_AT91_SAMA5D2_CHAN(11, 0x7c),
+};
+
+static unsigned at91_adc_startup_time(unsigned startup_time_min,
+				      unsigned adc_clk_khz)
+{
+	const unsigned startup_lookup[] = {
+		  0,   8,  16,  24,
+		 64,  80,  96, 112,
+		512, 576, 640, 704,
+		768, 832, 896, 960
+		};
+	unsigned ticks_min, i;
+
+	/*
+	 * Since the adc frequency is checked before, there is no reason
+	 * to not meet the startup time constraint.
+	 */
+
+	ticks_min = startup_time_min * adc_clk_khz / 1000;
+	for (i = 0; i < ARRAY_SIZE(startup_lookup); i++)
+		if (startup_lookup[i] > ticks_min)
+			break;
+
+	return i;
+}
+
+static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
+{
+	struct iio_dev *indio_dev = iio_priv_to_dev(st);
+	unsigned f_per, prescal, startup;
+
+	f_per = clk_get_rate(st->per_clk);
+	prescal = (f_per / (2 * freq)) - 1;
+
+	startup = at91_adc_startup_time(st->soc_info.startup_time,
+					freq / 1000);
+
+	at91_adc_writel(st, AT91_SAMA5D2_MR,
+			AT91_SAMA5D2_MR_TRANSFER(2)
+			| AT91_SAMA5D2_MR_STARTUP(startup)
+			| AT91_SAMA5D2_MR_PRESCAL(prescal));
+
+	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
+		freq, startup, prescal);
+}
+
+static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st)
+{
+	unsigned f_adc, f_per = clk_get_rate(st->per_clk);
+	unsigned mr, prescal;
+
+	mr = at91_adc_readl(st, AT91_SAMA5D2_MR);
+	prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET)
+		  & AT91_SAMA5D2_MR_PRESCAL_MAX;
+	f_adc = f_per / (2 * (prescal + 1));
+
+	return f_adc;
+}
+
+static irqreturn_t at91_adc_interrupt(int irq, void *private)
+{
+	struct iio_dev *indio = private;
+	struct at91_adc_state *st = iio_priv(indio);
+	u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR);
+	u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR);
+
+	if (status & imr) {
+		st->conversion_value = at91_adc_readl(st, st->chan->address);
+		st->conversion_done = true;
+		wake_up_interruptible(&st->wq_data_available);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int at91_adc_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
+
+		st->chan = chan;
+
+		at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel));
+		at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel));
+		at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START);
+
+		ret = wait_event_interruptible_timeout(st->wq_data_available,
+						       st->conversion_done,
+						       msecs_to_jiffies(1000));
+		if (ret == 0)
+			ret = -ETIMEDOUT;
+
+		if (ret > 0) {
+			*val = st->conversion_value;
+			ret = IIO_VAL_INT;
+			st->conversion_done = false;
+		}
+
+		at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel));
+		at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel));
+
+		mutex_unlock(&st->lock);
+		return ret;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = st->vref_uv / 1000;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = at91_adc_get_sample_freq(st);
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int at91_adc_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+		return -EINVAL;
+
+	if (val < st->soc_info.min_sample_rate ||
+	    val > st->soc_info.max_sample_rate)
+		return -EINVAL;
+
+	at91_adc_setup_samp_freq(st, val);
+
+	return 0;
+}
+
+static const struct iio_info at91_adc_info = {
+	.read_raw = &at91_adc_read_raw,
+	.write_raw = &at91_adc_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int at91_adc_probe(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev;
+	struct at91_adc_state *st;
+	struct resource	*res;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &at91_adc_info;
+	indio_dev->channels = at91_adc_channels;
+	indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels);
+
+	st = iio_priv(indio_dev);
+
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "atmel,min-sample-rate-hz",
+				   &st->soc_info.min_sample_rate);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"invalid or missing value for atmel,min-sample-rate-hz\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "atmel,max-sample-rate-hz",
+				   &st->soc_info.max_sample_rate);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"invalid or missing value for atmel,max-sample-rate-hz\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms",
+				   &st->soc_info.startup_time);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"invalid or missing value for atmel,startup-time-ms\n");
+		return ret;
+	}
+
+	init_waitqueue_head(&st->wq_data_available);
+	mutex_init(&st->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	st->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(st->base))
+		return PTR_ERR(st->base);
+
+	st->irq = platform_get_irq(pdev, 0);
+	if (st->irq <= 0) {
+		if (!st->irq)
+			st->irq = -ENXIO;
+
+		return st->irq;
+	}
+
+	st->per_clk = devm_clk_get(&pdev->dev, "adc_clk");
+	if (IS_ERR(st->per_clk))
+		return PTR_ERR(st->per_clk);
+
+	st->reg = devm_regulator_get(&pdev->dev, "vddana");
+	if (IS_ERR(st->reg))
+		return PTR_ERR(st->reg);
+
+	st->vref = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(st->vref))
+		return PTR_ERR(st->vref);
+
+	ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0,
+			       pdev->dev.driver->name, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = regulator_enable(st->reg);
+	if (ret)
+		return ret;
+
+	ret = regulator_enable(st->vref);
+	if (ret)
+		goto reg_disable;
+
+	st->vref_uv = regulator_get_voltage(st->vref);
+	if (st->vref_uv <= 0) {
+		ret = -EINVAL;
+		goto vref_disable;
+	}
+
+	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
+	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
+
+	at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
+
+	ret = clk_prepare_enable(st->per_clk);
+	if (ret)
+		goto vref_disable;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto per_clk_disable_unprepare;
+
+	dev_info(&pdev->dev, "version: %x\n",
+		 readl_relaxed(st->base + AT91_SAMA5D2_VERSION));
+
+	return 0;
+
+per_clk_disable_unprepare:
+	clk_disable_unprepare(st->per_clk);
+vref_disable:
+	regulator_disable(st->vref);
+reg_disable:
+	regulator_disable(st->reg);
+	return ret;
+}
+
+static int at91_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct at91_adc_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	clk_disable_unprepare(st->per_clk);
+
+	regulator_disable(st->vref);
+	regulator_disable(st->reg);
+
+	return 0;
+}
+
+static const struct of_device_id at91_adc_dt_match[] = {
+	{
+		.compatible = "atmel,sama5d2-adc",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, at91_adc_dt_match);
+
+static struct platform_driver at91_adc_driver = {
+	.probe = at91_adc_probe,
+	.remove = at91_adc_remove,
+	.driver = {
+		.name = "at91-sama5d2_adc",
+		.of_match_table = at91_adc_dt_match,
+	},
+};
+module_platform_driver(at91_adc_driver)
+
+MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
+MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 0c904edd6c00..7fd24949c0c1 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -46,7 +46,7 @@ struct axp288_adc_info {
 	struct regmap *regmap;
 };
 
-static const struct iio_chan_spec const axp288_adc_channels[] = {
+static const struct iio_chan_spec axp288_adc_channels[] = {
 	{
 		.indexed = 1,
 		.type = IIO_TEMP,
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index d803e5018a42..65909d5858b1 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -19,17 +19,18 @@
  *
  * Configurable 7-bit I2C slave address from 0x40 to 0x4F
  */
-#include <linux/module.h>
-#include <linux/kthread.h>
+
 #include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/sysfs.h>
-#include <linux/i2c.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
 #include <linux/regmap.h>
-#include <linux/platform_data/ina2xx.h>
-
 #include <linux/util_macros.h>
 
+#include <linux/platform_data/ina2xx.h>
+
 /* INA2XX registers definition */
 #define INA2XX_CONFIG                   0x00
 #define INA2XX_SHUNT_VOLTAGE            0x01	/* readonly */
@@ -38,7 +39,7 @@
 #define INA2XX_CURRENT                  0x04	/* readonly */
 #define INA2XX_CALIBRATION              0x05
 
-#define INA226_ALERT_MASK		0x06
+#define INA226_ALERT_MASK		GENMASK(2, 1)
 #define INA266_CVRF			BIT(3)
 
 #define INA2XX_MAX_REGISTERS            8
@@ -113,7 +114,7 @@ struct ina2xx_chip_info {
 	struct mutex state_lock;
 	unsigned int shunt_resistor;
 	int avg;
-	s64 prev_ns;	/* track buffer capture time, check for underruns*/
+	s64 prev_ns; /* track buffer capture time, check for underruns */
 	int int_time_vbus; /* Bus voltage integration time uS */
 	int int_time_vshunt; /* Shunt voltage integration time uS */
 	bool allow_async_readout;
@@ -121,21 +122,21 @@ struct ina2xx_chip_info {
 
 static const struct ina2xx_config ina2xx_config[] = {
 	[ina219] = {
-		    .config_default = INA219_CONFIG_DEFAULT,
-		    .calibration_factor = 40960000,
-		    .shunt_div = 100,
-		    .bus_voltage_shift = 3,
-		    .bus_voltage_lsb = 4000,
-		    .power_lsb = 20000,
-		    },
+		.config_default = INA219_CONFIG_DEFAULT,
+		.calibration_factor = 40960000,
+		.shunt_div = 100,
+		.bus_voltage_shift = 3,
+		.bus_voltage_lsb = 4000,
+		.power_lsb = 20000,
+	},
 	[ina226] = {
-		    .config_default = INA226_CONFIG_DEFAULT,
-		    .calibration_factor = 5120000,
-		    .shunt_div = 400,
-		    .bus_voltage_shift = 0,
-		    .bus_voltage_lsb = 1250,
-		    .power_lsb = 25000,
-		    },
+		.config_default = INA226_CONFIG_DEFAULT,
+		.calibration_factor = 5120000,
+		.shunt_div = 400,
+		.bus_voltage_shift = 0,
+		.bus_voltage_lsb = 1250,
+		.power_lsb = 25000,
+	},
 };
 
 static int ina2xx_read_raw(struct iio_dev *indio_dev,
@@ -149,7 +150,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
 		ret = regmap_read(chip->regmap, chan->address, &regval);
-		if (ret < 0)
+		if (ret)
 			return ret;
 
 		if (is_signed_reg(chan->address))
@@ -251,7 +252,7 @@ static int ina226_set_int_time_vbus(struct ina2xx_chip_info *chip,
 		return -EINVAL;
 
 	bits = find_closest(val_us, ina226_conv_time_tab,
-			ARRAY_SIZE(ina226_conv_time_tab));
+			    ARRAY_SIZE(ina226_conv_time_tab));
 
 	chip->int_time_vbus = ina226_conv_time_tab[bits];
 
@@ -270,7 +271,7 @@ static int ina226_set_int_time_vshunt(struct ina2xx_chip_info *chip,
 		return -EINVAL;
 
 	bits = find_closest(val_us, ina226_conv_time_tab,
-			ARRAY_SIZE(ina226_conv_time_tab));
+			    ARRAY_SIZE(ina226_conv_time_tab));
 
 	chip->int_time_vshunt = ina226_conv_time_tab[bits];
 
@@ -285,8 +286,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
 			    int val, int val2, long mask)
 {
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
-	int ret;
 	unsigned int config, tmp;
+	int ret;
 
 	if (iio_buffer_enabled(indio_dev))
 		return -EBUSY;
@@ -294,8 +295,8 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
 	mutex_lock(&chip->state_lock);
 
 	ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config);
-	if (ret < 0)
-		goto _err;
+	if (ret)
+		goto err;
 
 	tmp = config;
 
@@ -310,19 +311,19 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
 		else
 			ret = ina226_set_int_time_vbus(chip, val2, &tmp);
 		break;
+
 	default:
 		ret = -EINVAL;
 	}
 
 	if (!ret && (tmp != config))
 		ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp);
-_err:
+err:
 	mutex_unlock(&chip->state_lock);
 
 	return ret;
 }
 
-
 static ssize_t ina2xx_allow_async_readout_show(struct device *dev,
 					   struct device_attribute *attr,
 					   char *buf)
@@ -355,6 +356,7 @@ static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
 		return -EINVAL;
 
 	chip->shunt_resistor = val;
+
 	return 0;
 }
 
@@ -438,7 +440,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
 	unsigned short data[8];
 	int bit, ret, i = 0;
-	unsigned long buffer_us, elapsed_us;
 	s64 time_a, time_b;
 	unsigned int alert;
 
@@ -462,8 +463,6 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
 				return ret;
 
 			alert &= INA266_CVRF;
-			trace_printk("Conversion ready: %d\n", !!alert);
-
 		} while (!alert);
 
 	/*
@@ -488,19 +487,14 @@ static int ina2xx_work_buffer(struct iio_dev *indio_dev)
 	iio_push_to_buffers_with_timestamp(indio_dev,
 					   (unsigned int *)data, time_a);
 
-	buffer_us = (unsigned long)(time_b - time_a) / 1000;
-	elapsed_us = (unsigned long)(time_a - chip->prev_ns) / 1000;
-
-	trace_printk("uS: elapsed: %lu, buf: %lu\n", elapsed_us, buffer_us);
-
 	chip->prev_ns = time_a;
 
-	return buffer_us;
+	return (unsigned long)(time_b - time_a) / 1000;
 };
 
 static int ina2xx_capture_thread(void *data)
 {
-	struct iio_dev *indio_dev = (struct iio_dev *)data;
+	struct iio_dev *indio_dev = data;
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
 	unsigned int sampling_us = SAMPLING_PERIOD(chip);
 	int buffer_us;
@@ -530,12 +524,13 @@ static int ina2xx_buffer_enable(struct iio_dev *indio_dev)
 	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
 	unsigned int sampling_us = SAMPLING_PERIOD(chip);
 
-	trace_printk("Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n",
-		     (unsigned int)(*indio_dev->active_scan_mask),
-		     1000000/sampling_us, chip->avg);
+	dev_dbg(&indio_dev->dev, "Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n",
+		(unsigned int)(*indio_dev->active_scan_mask),
+		1000000 / sampling_us, chip->avg);
 
-	trace_printk("Expected work period: %u us\n", sampling_us);
-	trace_printk("Async readout mode: %d\n", chip->allow_async_readout);
+	dev_dbg(&indio_dev->dev, "Expected work period: %u us\n", sampling_us);
+	dev_dbg(&indio_dev->dev, "Async readout mode: %d\n",
+		chip->allow_async_readout);
 
 	chip->prev_ns = iio_get_time_ns();
 
@@ -575,8 +570,7 @@ static int ina2xx_debug_reg(struct iio_dev *indio_dev,
 }
 
 /* Possible integration times for vshunt and vbus */
-static IIO_CONST_ATTR_INT_TIME_AVAIL \
- ("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
+static IIO_CONST_ATTR_INT_TIME_AVAIL("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
 
 static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR,
 		       ina2xx_allow_async_readout_show,
@@ -598,21 +592,23 @@ static const struct attribute_group ina2xx_attribute_group = {
 };
 
 static const struct iio_info ina2xx_info = {
-	.debugfs_reg_access = &ina2xx_debug_reg,
-	.read_raw = &ina2xx_read_raw,
-	.write_raw = &ina2xx_write_raw,
-	.attrs = &ina2xx_attribute_group,
 	.driver_module = THIS_MODULE,
+	.attrs = &ina2xx_attribute_group,
+	.read_raw = ina2xx_read_raw,
+	.write_raw = ina2xx_write_raw,
+	.debugfs_reg_access = ina2xx_debug_reg,
 };
 
 /* Initialize the configuration and calibration registers. */
 static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
 {
 	u16 regval;
-	int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
+	int ret;
 
-	if (ret < 0)
+	ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
+	if (ret)
 		return ret;
+
 	/*
 	 * Set current LSB to 1mA, shunt is in uOhms
 	 * (equation 13 in datasheet). We hardcode a Current_LSB
@@ -621,7 +617,7 @@ static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
 	 * to the user for now.
 	 */
 	regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor,
-			    chip->shunt_resistor);
+				   chip->shunt_resistor);
 
 	return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval);
 }
@@ -632,8 +628,8 @@ static int ina2xx_probe(struct i2c_client *client,
 	struct ina2xx_chip_info *chip;
 	struct iio_dev *indio_dev;
 	struct iio_buffer *buffer;
-	int ret;
 	unsigned int val;
+	int ret;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
 	if (!indio_dev)
@@ -641,8 +637,19 @@ static int ina2xx_probe(struct i2c_client *client,
 
 	chip = iio_priv(indio_dev);
 
+	/* This is only used for device removal purposes. */
+	i2c_set_clientdata(client, indio_dev);
+
+	chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		dev_err(&client->dev, "failed to allocate register map\n");
+		return PTR_ERR(chip->regmap);
+	}
+
 	chip->config = &ina2xx_config[id->driver_data];
 
+	mutex_init(&chip->state_lock);
+
 	if (of_property_read_u32(client->dev.of_node,
 				 "shunt-resistor", &val) < 0) {
 		struct ina2xx_platform_data *pdata =
@@ -658,25 +665,6 @@ static int ina2xx_probe(struct i2c_client *client,
 	if (ret)
 		return ret;
 
-	mutex_init(&chip->state_lock);
-
-	/* This is only used for device removal purposes. */
-	i2c_set_clientdata(client, indio_dev);
-
-	indio_dev->name = id->name;
-	indio_dev->channels = ina2xx_channels;
-	indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
-
-	indio_dev->dev.parent = &client->dev;
-	indio_dev->info = &ina2xx_info;
-	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
-
-	chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
-	if (IS_ERR(chip->regmap)) {
-		dev_err(&client->dev, "failed to allocate register map\n");
-		return PTR_ERR(chip->regmap);
-	}
-
 	/* Patch the current config register with default. */
 	val = chip->config->config_default;
 
@@ -687,24 +675,28 @@ static int ina2xx_probe(struct i2c_client *client,
 	}
 
 	ret = ina2xx_init(chip, val);
-	if (ret < 0) {
-		dev_err(&client->dev, "error configuring the device: %d\n",
-			ret);
-		return -ENODEV;
+	if (ret) {
+		dev_err(&client->dev, "error configuring the device\n");
+		return ret;
 	}
 
+	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = ina2xx_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
+	indio_dev->name = id->name;
+	indio_dev->info = &ina2xx_info;
+	indio_dev->setup_ops = &ina2xx_setup_ops;
+
 	buffer = devm_iio_kfifo_allocate(&indio_dev->dev);
 	if (!buffer)
 		return -ENOMEM;
 
-	indio_dev->setup_ops = &ina2xx_setup_ops;
-
 	iio_device_attach_buffer(indio_dev, buffer);
 
 	return iio_device_register(indio_dev);
 }
 
-
 static int ina2xx_remove(struct i2c_client *client)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
@@ -717,7 +709,6 @@ static int ina2xx_remove(struct i2c_client *client)
 				  INA2XX_MODE_MASK, 0);
 }
 
-
 static const struct i2c_device_id ina2xx_id[] = {
 	{"ina219", ina219},
 	{"ina220", ina219},
@@ -726,7 +717,6 @@ static const struct i2c_device_id ina2xx_id[] = {
 	{"ina231", ina226},
 	{}
 };
-
 MODULE_DEVICE_TABLE(i2c, ina2xx_id);
 
 static struct i2c_driver ina2xx_driver = {
@@ -737,7 +727,6 @@ static struct i2c_driver ina2xx_driver = {
 	.remove = ina2xx_remove,
 	.id_table = ina2xx_id,
 };
-
 module_i2c_driver(ina2xx_driver);
 
 MODULE_AUTHOR("Marc Titinger <marc.titinger@baylibre.com>");
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index d1c05f6eed18..a850ca7d1eda 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -187,26 +187,27 @@ out:
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
 	}
 
-#define MCP320X_VOLTAGE_CHANNEL_DIFF(num)			\
+#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2)		\
 	{							\
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
-		.channel = (num * 2),				\
-		.channel2 = (num * 2 + 1),			\
-		.address = (num * 2),				\
+		.channel = (chan1),				\
+		.channel2 = (chan2),				\
+		.address = (chan1),				\
 		.differential = 1,				\
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
 	}
 
 static const struct iio_chan_spec mcp3201_channels[] = {
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
 };
 
 static const struct iio_chan_spec mcp3202_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(0),
 	MCP320X_VOLTAGE_CHANNEL(1),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
 };
 
 static const struct iio_chan_spec mcp3204_channels[] = {
@@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(1),
 	MCP320X_VOLTAGE_CHANNEL(2),
 	MCP320X_VOLTAGE_CHANNEL(3),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
 };
 
 static const struct iio_chan_spec mcp3208_channels[] = {
@@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = {
 	MCP320X_VOLTAGE_CHANNEL(5),
 	MCP320X_VOLTAGE_CHANNEL(6),
 	MCP320X_VOLTAGE_CHANNEL(7),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(0),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(1),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(2),
-	MCP320X_VOLTAGE_CHANNEL_DIFF(3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7),
+	MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6),
 };
 
 static const struct iio_info mcp320x_info = {
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 6eca7aea8a37..d7b36efd2f3c 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -1,11 +1,12 @@
 /*
- * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family
+ * mcp3422.c - driver for the Microchip mcp3421/2/3/4/5/6/7/8 chip family
  *
  * Copyright (C) 2013, Angelo Compagnucci
  * Author: Angelo Compagnucci <angelo.compagnucci@gmail.com>
  *
  * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
  *            http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf
+ *            http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf
  *
  * This driver exports the value of analog input voltage to sysfs, the
  * voltage unit is nV.
@@ -338,7 +339,7 @@ static int mcp3422_probe(struct i2c_client *client,
 	u8 config;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*adc));
 	if (!indio_dev)
@@ -357,6 +358,7 @@ static int mcp3422_probe(struct i2c_client *client,
 
 	switch (adc->id) {
 	case 1:
+	case 5:
 		indio_dev->channels = mcp3421_channels;
 		indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels);
 		break;
@@ -395,6 +397,7 @@ static const struct i2c_device_id mcp3422_id[] = {
 	{ "mcp3422", 2 },
 	{ "mcp3423", 3 },
 	{ "mcp3424", 4 },
+	{ "mcp3425", 5 },
 	{ "mcp3426", 6 },
 	{ "mcp3427", 7 },
 	{ "mcp3428", 8 },
@@ -421,5 +424,5 @@ static struct i2c_driver mcp3422_driver = {
 module_i2c_driver(mcp3422_driver);
 
 MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
-MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver");
+MODULE_DESCRIPTION("Microchip mcp3421/2/3/4/5/6/7/8 driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c
new file mode 100644
index 000000000000..33051b87aac2
--- /dev/null
+++ b/drivers/iio/adc/mxs-lradc.c
@@ -0,0 +1,1775 @@
+/*
+ * Freescale MXS LRADC driver
+ *
+ * Copyright (c) 2012 DENX Software Engineering, GmbH.
+ * Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/stmp_device.h>
+#include <linux/sysfs.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/sysfs.h>
+
+#define DRIVER_NAME		"mxs-lradc"
+
+#define LRADC_MAX_DELAY_CHANS	4
+#define LRADC_MAX_MAPPED_CHANS	8
+#define LRADC_MAX_TOTAL_CHANS	16
+
+#define LRADC_DELAY_TIMER_HZ	2000
+
+/*
+ * Make this runtime configurable if necessary. Currently, if the buffered mode
+ * is enabled, the LRADC takes LRADC_DELAY_TIMER_LOOP samples of data before
+ * triggering IRQ. The sampling happens every (LRADC_DELAY_TIMER_PER / 2000)
+ * seconds. The result is that the samples arrive every 500mS.
+ */
+#define LRADC_DELAY_TIMER_PER	200
+#define LRADC_DELAY_TIMER_LOOP	5
+
+/*
+ * Once the pen touches the touchscreen, the touchscreen switches from
+ * IRQ-driven mode to polling mode to prevent interrupt storm. The polling
+ * is realized by worker thread, which is called every 20 or so milliseconds.
+ * This gives the touchscreen enough fluency and does not strain the system
+ * too much.
+ */
+#define LRADC_TS_SAMPLE_DELAY_MS	5
+
+/*
+ * The LRADC reads the following amount of samples from each touchscreen
+ * channel and the driver then computes average of these.
+ */
+#define LRADC_TS_SAMPLE_AMOUNT		4
+
+enum mxs_lradc_id {
+	IMX23_LRADC,
+	IMX28_LRADC,
+};
+
+static const char * const mx23_lradc_irq_names[] = {
+	"mxs-lradc-touchscreen",
+	"mxs-lradc-channel0",
+	"mxs-lradc-channel1",
+	"mxs-lradc-channel2",
+	"mxs-lradc-channel3",
+	"mxs-lradc-channel4",
+	"mxs-lradc-channel5",
+	"mxs-lradc-channel6",
+	"mxs-lradc-channel7",
+};
+
+static const char * const mx28_lradc_irq_names[] = {
+	"mxs-lradc-touchscreen",
+	"mxs-lradc-thresh0",
+	"mxs-lradc-thresh1",
+	"mxs-lradc-channel0",
+	"mxs-lradc-channel1",
+	"mxs-lradc-channel2",
+	"mxs-lradc-channel3",
+	"mxs-lradc-channel4",
+	"mxs-lradc-channel5",
+	"mxs-lradc-channel6",
+	"mxs-lradc-channel7",
+	"mxs-lradc-button0",
+	"mxs-lradc-button1",
+};
+
+struct mxs_lradc_of_config {
+	const int		irq_count;
+	const char * const	*irq_name;
+	const u32		*vref_mv;
+};
+
+#define VREF_MV_BASE 1850
+
+static const u32 mx23_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
+	VREF_MV_BASE,		/* CH0 */
+	VREF_MV_BASE,		/* CH1 */
+	VREF_MV_BASE,		/* CH2 */
+	VREF_MV_BASE,		/* CH3 */
+	VREF_MV_BASE,		/* CH4 */
+	VREF_MV_BASE,		/* CH5 */
+	VREF_MV_BASE * 2,	/* CH6 VDDIO */
+	VREF_MV_BASE * 4,	/* CH7 VBATT */
+	VREF_MV_BASE,		/* CH8 Temp sense 0 */
+	VREF_MV_BASE,		/* CH9 Temp sense 1 */
+	VREF_MV_BASE,		/* CH10 */
+	VREF_MV_BASE,		/* CH11 */
+	VREF_MV_BASE,		/* CH12 USB_DP */
+	VREF_MV_BASE,		/* CH13 USB_DN */
+	VREF_MV_BASE,		/* CH14 VBG */
+	VREF_MV_BASE * 4,	/* CH15 VDD5V */
+};
+
+static const u32 mx28_vref_mv[LRADC_MAX_TOTAL_CHANS] = {
+	VREF_MV_BASE,		/* CH0 */
+	VREF_MV_BASE,		/* CH1 */
+	VREF_MV_BASE,		/* CH2 */
+	VREF_MV_BASE,		/* CH3 */
+	VREF_MV_BASE,		/* CH4 */
+	VREF_MV_BASE,		/* CH5 */
+	VREF_MV_BASE,		/* CH6 */
+	VREF_MV_BASE * 4,	/* CH7 VBATT */
+	VREF_MV_BASE,		/* CH8 Temp sense 0 */
+	VREF_MV_BASE,		/* CH9 Temp sense 1 */
+	VREF_MV_BASE * 2,	/* CH10 VDDIO */
+	VREF_MV_BASE,		/* CH11 VTH */
+	VREF_MV_BASE * 2,	/* CH12 VDDA */
+	VREF_MV_BASE,		/* CH13 VDDD */
+	VREF_MV_BASE,		/* CH14 VBG */
+	VREF_MV_BASE * 4,	/* CH15 VDD5V */
+};
+
+static const struct mxs_lradc_of_config mxs_lradc_of_config[] = {
+	[IMX23_LRADC] = {
+		.irq_count	= ARRAY_SIZE(mx23_lradc_irq_names),
+		.irq_name	= mx23_lradc_irq_names,
+		.vref_mv	= mx23_vref_mv,
+	},
+	[IMX28_LRADC] = {
+		.irq_count	= ARRAY_SIZE(mx28_lradc_irq_names),
+		.irq_name	= mx28_lradc_irq_names,
+		.vref_mv	= mx28_vref_mv,
+	},
+};
+
+enum mxs_lradc_ts {
+	MXS_LRADC_TOUCHSCREEN_NONE = 0,
+	MXS_LRADC_TOUCHSCREEN_4WIRE,
+	MXS_LRADC_TOUCHSCREEN_5WIRE,
+};
+
+/*
+ * Touchscreen handling
+ */
+enum lradc_ts_plate {
+	LRADC_TOUCH = 0,
+	LRADC_SAMPLE_X,
+	LRADC_SAMPLE_Y,
+	LRADC_SAMPLE_PRESSURE,
+	LRADC_SAMPLE_VALID,
+};
+
+enum mxs_lradc_divbytwo {
+	MXS_LRADC_DIV_DISABLED = 0,
+	MXS_LRADC_DIV_ENABLED,
+};
+
+struct mxs_lradc_scale {
+	unsigned int		integer;
+	unsigned int		nano;
+};
+
+struct mxs_lradc {
+	struct device		*dev;
+	void __iomem		*base;
+	int			irq[13];
+
+	struct clk		*clk;
+
+	u32			*buffer;
+	struct iio_trigger	*trig;
+
+	struct mutex		lock;
+
+	struct completion	completion;
+
+	const u32		*vref_mv;
+	struct mxs_lradc_scale	scale_avail[LRADC_MAX_TOTAL_CHANS][2];
+	unsigned long		is_divided;
+
+	/*
+	 * When the touchscreen is enabled, we give it two private virtual
+	 * channels: #6 and #7. This means that only 6 virtual channels (instead
+	 * of 8) will be available for buffered capture.
+	 */
+#define TOUCHSCREEN_VCHANNEL1		7
+#define TOUCHSCREEN_VCHANNEL2		6
+#define BUFFER_VCHANS_LIMITED		0x3f
+#define BUFFER_VCHANS_ALL		0xff
+	u8			buffer_vchans;
+
+	/*
+	 * Furthermore, certain LRADC channels are shared between touchscreen
+	 * and/or touch-buttons and generic LRADC block. Therefore when using
+	 * either of these, these channels are not available for the regular
+	 * sampling. The shared channels are as follows:
+	 *
+	 * CH0 -- Touch button #0
+	 * CH1 -- Touch button #1
+	 * CH2 -- Touch screen XPUL
+	 * CH3 -- Touch screen YPLL
+	 * CH4 -- Touch screen XNUL
+	 * CH5 -- Touch screen YNLR
+	 * CH6 -- Touch screen WIPER (5-wire only)
+	 *
+	 * The bit fields below represents which parts of the LRADC block are
+	 * switched into special mode of operation. These channels can not
+	 * be sampled as regular LRADC channels. The driver will refuse any
+	 * attempt to sample these channels.
+	 */
+#define CHAN_MASK_TOUCHBUTTON		(BIT(1) | BIT(0))
+#define CHAN_MASK_TOUCHSCREEN_4WIRE	(0xf << 2)
+#define CHAN_MASK_TOUCHSCREEN_5WIRE	(0x1f << 2)
+	enum mxs_lradc_ts	use_touchscreen;
+	bool			use_touchbutton;
+
+	struct input_dev	*ts_input;
+
+	enum mxs_lradc_id	soc;
+	enum lradc_ts_plate	cur_plate; /* state machine */
+	bool			ts_valid;
+	unsigned		ts_x_pos;
+	unsigned		ts_y_pos;
+	unsigned		ts_pressure;
+
+	/* handle touchscreen's physical behaviour */
+	/* samples per coordinate */
+	unsigned		over_sample_cnt;
+	/* time clocks between samples */
+	unsigned		over_sample_delay;
+	/* time in clocks to wait after the plates where switched */
+	unsigned		settling_delay;
+};
+
+#define	LRADC_CTRL0				0x00
+# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE	BIT(23)
+# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE	BIT(22)
+# define LRADC_CTRL0_MX28_YNNSW	/* YM */	BIT(21)
+# define LRADC_CTRL0_MX28_YPNSW	/* YP */	BIT(20)
+# define LRADC_CTRL0_MX28_YPPSW	/* YP */	BIT(19)
+# define LRADC_CTRL0_MX28_XNNSW	/* XM */	BIT(18)
+# define LRADC_CTRL0_MX28_XNPSW	/* XM */	BIT(17)
+# define LRADC_CTRL0_MX28_XPPSW	/* XP */	BIT(16)
+
+# define LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE	BIT(20)
+# define LRADC_CTRL0_MX23_YM			BIT(19)
+# define LRADC_CTRL0_MX23_XM			BIT(18)
+# define LRADC_CTRL0_MX23_YP			BIT(17)
+# define LRADC_CTRL0_MX23_XP			BIT(16)
+
+# define LRADC_CTRL0_MX28_PLATE_MASK \
+		(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
+		LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
+		LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
+		LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
+
+# define LRADC_CTRL0_MX23_PLATE_MASK \
+		(LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE | \
+		LRADC_CTRL0_MX23_YM | LRADC_CTRL0_MX23_XM | \
+		LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XP)
+
+#define	LRADC_CTRL1				0x10
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ_EN		BIT(24)
+#define	LRADC_CTRL1_LRADC_IRQ_EN(n)		(1 << ((n) + 16))
+#define	LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK	(0x1fff << 16)
+#define	LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK	(0x01ff << 16)
+#define	LRADC_CTRL1_LRADC_IRQ_EN_OFFSET		16
+#define	LRADC_CTRL1_TOUCH_DETECT_IRQ		BIT(8)
+#define	LRADC_CTRL1_LRADC_IRQ(n)		(1 << (n))
+#define	LRADC_CTRL1_MX28_LRADC_IRQ_MASK		0x1fff
+#define	LRADC_CTRL1_MX23_LRADC_IRQ_MASK		0x01ff
+#define	LRADC_CTRL1_LRADC_IRQ_OFFSET		0
+
+#define	LRADC_CTRL2				0x20
+#define	LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET	24
+#define	LRADC_CTRL2_TEMPSENSE_PWD		BIT(15)
+
+#define	LRADC_STATUS				0x40
+#define	LRADC_STATUS_TOUCH_DETECT_RAW		BIT(0)
+
+#define	LRADC_CH(n)				(0x50 + (0x10 * (n)))
+#define	LRADC_CH_ACCUMULATE			BIT(29)
+#define	LRADC_CH_NUM_SAMPLES_MASK		(0x1f << 24)
+#define	LRADC_CH_NUM_SAMPLES_OFFSET		24
+#define	LRADC_CH_NUM_SAMPLES(x) \
+				((x) << LRADC_CH_NUM_SAMPLES_OFFSET)
+#define	LRADC_CH_VALUE_MASK			0x3ffff
+#define	LRADC_CH_VALUE_OFFSET			0
+
+#define	LRADC_DELAY(n)				(0xd0 + (0x10 * (n)))
+#define	LRADC_DELAY_TRIGGER_LRADCS_MASK		(0xffUL << 24)
+#define	LRADC_DELAY_TRIGGER_LRADCS_OFFSET	24
+#define	LRADC_DELAY_TRIGGER(x) \
+				(((x) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) & \
+				LRADC_DELAY_TRIGGER_LRADCS_MASK)
+#define	LRADC_DELAY_KICK			BIT(20)
+#define	LRADC_DELAY_TRIGGER_DELAYS_MASK		(0xf << 16)
+#define	LRADC_DELAY_TRIGGER_DELAYS_OFFSET	16
+#define	LRADC_DELAY_TRIGGER_DELAYS(x) \
+				(((x) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) & \
+				LRADC_DELAY_TRIGGER_DELAYS_MASK)
+#define	LRADC_DELAY_LOOP_COUNT_MASK		(0x1f << 11)
+#define	LRADC_DELAY_LOOP_COUNT_OFFSET		11
+#define	LRADC_DELAY_LOOP(x) \
+				(((x) << LRADC_DELAY_LOOP_COUNT_OFFSET) & \
+				LRADC_DELAY_LOOP_COUNT_MASK)
+#define	LRADC_DELAY_DELAY_MASK			0x7ff
+#define	LRADC_DELAY_DELAY_OFFSET		0
+#define	LRADC_DELAY_DELAY(x) \
+				(((x) << LRADC_DELAY_DELAY_OFFSET) & \
+				LRADC_DELAY_DELAY_MASK)
+
+#define	LRADC_CTRL4				0x140
+#define	LRADC_CTRL4_LRADCSELECT_MASK(n)		(0xf << ((n) * 4))
+#define	LRADC_CTRL4_LRADCSELECT_OFFSET(n)	((n) * 4)
+#define	LRADC_CTRL4_LRADCSELECT(n, x) \
+				(((x) << LRADC_CTRL4_LRADCSELECT_OFFSET(n)) & \
+				LRADC_CTRL4_LRADCSELECT_MASK(n))
+
+#define LRADC_RESOLUTION			12
+#define LRADC_SINGLE_SAMPLE_MASK		((1 << LRADC_RESOLUTION) - 1)
+
+static void mxs_lradc_reg_set(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg + STMP_OFFSET_REG_SET);
+}
+
+static void mxs_lradc_reg_clear(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg + STMP_OFFSET_REG_CLR);
+}
+
+static void mxs_lradc_reg_wrt(struct mxs_lradc *lradc, u32 val, u32 reg)
+{
+	writel(val, lradc->base + reg);
+}
+
+static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_PLATE_MASK;
+	return LRADC_CTRL0_MX28_PLATE_MASK;
+}
+
+static u32 mxs_lradc_irq_en_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL1_MX23_LRADC_IRQ_EN_MASK;
+	return LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK;
+}
+
+static u32 mxs_lradc_irq_mask(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL1_MX23_LRADC_IRQ_MASK;
+	return LRADC_CTRL1_MX28_LRADC_IRQ_MASK;
+}
+
+static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE;
+	return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE;
+}
+
+static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM;
+	return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
+}
+
+static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM;
+	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
+}
+
+static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc)
+{
+	if (lradc->soc == IMX23_LRADC)
+		return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM;
+	return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
+}
+
+static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc)
+{
+	return !!(readl(lradc->base + LRADC_STATUS) &
+					LRADC_STATUS_TOUCH_DETECT_RAW);
+}
+
+static void mxs_lradc_map_channel(struct mxs_lradc *lradc, unsigned vch,
+				  unsigned ch)
+{
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch),
+			    LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4);
+}
+
+static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
+{
+	/*
+	 * prepare for oversampling conversion
+	 *
+	 * from the datasheet:
+	 * "The ACCUMULATE bit in the appropriate channel register
+	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
+	 * otherwise, the IRQs will not fire."
+	 */
+	mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE |
+			  LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1),
+			  LRADC_CH(ch));
+
+	/*
+	 * from the datasheet:
+	 * "Software must clear this register in preparation for a
+	 * multi-cycle accumulation.
+	 */
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch));
+
+	/*
+	 * prepare the delay/loop unit according to the oversampling count
+	 *
+	 * from the datasheet:
+	 * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1,
+	 * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise,
+	 * the LRADC will not trigger the delay group."
+	 */
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) |
+			  LRADC_DELAY_TRIGGER_DELAYS(0) |
+			  LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
+			  LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
+			  LRADC_DELAY(3));
+
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1);
+
+	/*
+	 * after changing the touchscreen plates setting
+	 * the signals need some initial time to settle. Start the
+	 * SoC's delay unit and start the conversion later
+	 * and automatically.
+	 */
+	mxs_lradc_reg_wrt(
+		lradc,
+		LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
+		LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
+		LRADC_DELAY_KICK |
+		LRADC_DELAY_DELAY(lradc->settling_delay),
+		LRADC_DELAY(2));
+}
+
+/*
+ * Pressure detection is special:
+ * We want to do both required measurements for the pressure detection in
+ * one turn. Use the hardware features to chain both conversions and let the
+ * hardware report one interrupt if both conversions are done
+ */
+static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
+					unsigned ch2)
+{
+	u32 reg;
+
+	/*
+	 * prepare for oversampling conversion
+	 *
+	 * from the datasheet:
+	 * "The ACCUMULATE bit in the appropriate channel register
+	 * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
+	 * otherwise, the IRQs will not fire."
+	 */
+	reg = LRADC_CH_ACCUMULATE |
+		LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1);
+	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1));
+	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2));
+
+	/*
+	 * from the datasheet:
+	 * "Software must clear this register in preparation for a
+	 * multi-cycle accumulation.
+	 */
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1));
+	mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2));
+
+	/* prepare the delay/loop unit according to the oversampling count */
+	mxs_lradc_reg_wrt(
+		    lradc,
+		    LRADC_DELAY_TRIGGER(1 << ch1) |
+		    LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */
+		    LRADC_DELAY_TRIGGER_DELAYS(0) |
+		    LRADC_DELAY_LOOP(lradc->over_sample_cnt - 1) |
+		    LRADC_DELAY_DELAY(lradc->over_sample_delay - 1),
+		    LRADC_DELAY(3));
+
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1);
+
+	/*
+	 * after changing the touchscreen plates setting
+	 * the signals need some initial time to settle. Start the
+	 * SoC's delay unit and start the conversion later
+	 * and automatically.
+	 */
+	mxs_lradc_reg_wrt(
+		lradc,
+		LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
+		LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
+		LRADC_DELAY_KICK |
+		LRADC_DELAY_DELAY(lradc->settling_delay), LRADC_DELAY(2));
+}
+
+static unsigned mxs_lradc_read_raw_channel(struct mxs_lradc *lradc,
+					   unsigned channel)
+{
+	u32 reg;
+	unsigned num_samples, val;
+
+	reg = readl(lradc->base + LRADC_CH(channel));
+	if (reg & LRADC_CH_ACCUMULATE)
+		num_samples = lradc->over_sample_cnt;
+	else
+		num_samples = 1;
+
+	val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET;
+	return val / num_samples;
+}
+
+static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc *lradc,
+					   unsigned ch1, unsigned ch2)
+{
+	u32 reg, mask;
+	unsigned pressure, m1, m2;
+
+	mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2);
+	reg = readl(lradc->base + LRADC_CTRL1) & mask;
+
+	while (reg != mask) {
+		reg = readl(lradc->base + LRADC_CTRL1) & mask;
+		dev_dbg(lradc->dev, "One channel is still busy: %X\n", reg);
+	}
+
+	m1 = mxs_lradc_read_raw_channel(lradc, ch1);
+	m2 = mxs_lradc_read_raw_channel(lradc, ch2);
+
+	if (m2 == 0) {
+		dev_warn(lradc->dev, "Cannot calculate pressure\n");
+		return 1 << (LRADC_RESOLUTION - 1);
+	}
+
+	/* simply scale the value from 0 ... max ADC resolution */
+	pressure = m1;
+	pressure *= (1 << LRADC_RESOLUTION);
+	pressure /= m2;
+
+	dev_dbg(lradc->dev, "Pressure = %u\n", pressure);
+	return pressure;
+}
+
+#define TS_CH_XP 2
+#define TS_CH_YP 3
+#define TS_CH_XM 4
+#define TS_CH_YM 5
+
+/*
+ * YP(open)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ *    YM(-)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *         XP(weak+)        XM(open)
+ *
+ * "weak+" means 200k Ohm VDDIO
+ * (-) means GND
+ */
+static void mxs_lradc_setup_touch_detection(struct mxs_lradc *lradc)
+{
+	/*
+	 * In order to detect a touch event the 'touch detect enable' bit
+	 * enables:
+	 *  - a weak pullup to the X+ connector
+	 *  - a strong ground at the Y- connector
+	 */
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc),
+			  LRADC_CTRL0);
+}
+
+/*
+ * YP(meas)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ * YM(open)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *           XP(+)          XM(-)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_x_pos(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_X;
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP);
+	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
+}
+
+/*
+ *   YP(+)--+-------------+
+ *          |             |--+
+ *          |             |  |
+ *   YM(-)--+-------------+  |
+ *            +--------------+
+ *            |              |
+ *         XP(open)        XM(meas)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_y_pos(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_Y;
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM);
+	mxs_lradc_setup_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1);
+}
+
+/*
+ *    YP(+)--+-------------+
+ *           |             |--+
+ *           |             |  |
+ * YM(meas)--+-------------+  |
+ *             +--------------+
+ *             |              |
+ *          XP(meas)        XM(-)
+ *
+ * (+) means here 1.85 V
+ * (-) means here GND
+ */
+static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+	mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0);
+
+	lradc->cur_plate = LRADC_SAMPLE_PRESSURE;
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM);
+	mxs_lradc_map_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP);
+	mxs_lradc_setup_ts_pressure(lradc, TOUCHSCREEN_VCHANNEL2,
+				    TOUCHSCREEN_VCHANNEL1);
+}
+
+static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
+{
+	mxs_lradc_setup_touch_detection(lradc);
+
+	lradc->cur_plate = LRADC_TOUCH;
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ |
+			    LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+}
+
+static void mxs_lradc_start_touch_event(struct mxs_lradc *lradc)
+{
+	mxs_lradc_reg_clear(lradc,
+			    LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
+			    LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc,
+			  LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1),
+			  LRADC_CTRL1);
+	/*
+	 * start with the Y-pos, because it uses nearly the same plate
+	 * settings like the touch detection
+	 */
+	mxs_lradc_prepare_y_pos(lradc);
+}
+
+static void mxs_lradc_report_ts_event(struct mxs_lradc *lradc)
+{
+	input_report_abs(lradc->ts_input, ABS_X, lradc->ts_x_pos);
+	input_report_abs(lradc->ts_input, ABS_Y, lradc->ts_y_pos);
+	input_report_abs(lradc->ts_input, ABS_PRESSURE, lradc->ts_pressure);
+	input_report_key(lradc->ts_input, BTN_TOUCH, 1);
+	input_sync(lradc->ts_input);
+}
+
+static void mxs_lradc_complete_touch_event(struct mxs_lradc *lradc)
+{
+	mxs_lradc_setup_touch_detection(lradc);
+	lradc->cur_plate = LRADC_SAMPLE_VALID;
+	/*
+	 * start a dummy conversion to burn time to settle the signals
+	 * note: we are not interested in the conversion's value
+	 */
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1));
+	mxs_lradc_reg_clear(lradc,
+			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2),
+			    LRADC_CTRL1);
+	mxs_lradc_reg_wrt(
+		    lradc,
+		    LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) |
+		    LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */
+		    LRADC_DELAY(2));
+}
+
+/*
+ * in order to avoid false measurements, report only samples where
+ * the surface is still touched after the position measurement
+ */
+static void mxs_lradc_finish_touch_event(struct mxs_lradc *lradc, bool valid)
+{
+	/* if it is still touched, report the sample */
+	if (valid && mxs_lradc_check_touch_event(lradc)) {
+		lradc->ts_valid = true;
+		mxs_lradc_report_ts_event(lradc);
+	}
+
+	/* if it is even still touched, continue with the next measurement */
+	if (mxs_lradc_check_touch_event(lradc)) {
+		mxs_lradc_prepare_y_pos(lradc);
+		return;
+	}
+
+	if (lradc->ts_valid) {
+		/* signal the release */
+		lradc->ts_valid = false;
+		input_report_key(lradc->ts_input, BTN_TOUCH, 0);
+		input_sync(lradc->ts_input);
+	}
+
+	/* if it is released, wait for the next touch via IRQ */
+	lradc->cur_plate = LRADC_TOUCH;
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
+	mxs_lradc_reg_clear(lradc,
+			    LRADC_CTRL1_TOUCH_DETECT_IRQ |
+			    LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+			    LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1),
+			    LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
+}
+
+/* touchscreen's state machine */
+static void mxs_lradc_handle_touch(struct mxs_lradc *lradc)
+{
+	switch (lradc->cur_plate) {
+	case LRADC_TOUCH:
+		if (mxs_lradc_check_touch_event(lradc))
+			mxs_lradc_start_touch_event(lradc);
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ,
+				    LRADC_CTRL1);
+		return;
+
+	case LRADC_SAMPLE_Y:
+		lradc->ts_y_pos =
+		    mxs_lradc_read_raw_channel(lradc,
+					       TOUCHSCREEN_VCHANNEL1);
+		mxs_lradc_prepare_x_pos(lradc);
+		return;
+
+	case LRADC_SAMPLE_X:
+		lradc->ts_x_pos =
+		    mxs_lradc_read_raw_channel(lradc,
+					       TOUCHSCREEN_VCHANNEL1);
+		mxs_lradc_prepare_pressure(lradc);
+		return;
+
+	case LRADC_SAMPLE_PRESSURE:
+		lradc->ts_pressure =
+		    mxs_lradc_read_ts_pressure(lradc,
+					       TOUCHSCREEN_VCHANNEL2,
+					       TOUCHSCREEN_VCHANNEL1);
+		mxs_lradc_complete_touch_event(lradc);
+		return;
+
+	case LRADC_SAMPLE_VALID:
+		mxs_lradc_finish_touch_event(lradc, 1);
+		break;
+	}
+}
+
+/*
+ * Raw I/O operations
+ */
+static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val)
+{
+	struct mxs_lradc *lradc = iio_priv(iio_dev);
+	int ret;
+
+	/*
+	 * See if there is no buffered operation in progress. If there is, simply
+	 * bail out. This can be improved to support both buffered and raw IO at
+	 * the same time, yet the code becomes horribly complicated. Therefore I
+	 * applied KISS principle here.
+	 */
+	ret = mutex_trylock(&lradc->lock);
+	if (!ret)
+		return -EBUSY;
+
+	reinit_completion(&lradc->completion);
+
+	/*
+	 * No buffered operation in progress, map the channel and trigger it.
+	 * Virtual channel 0 is always used here as the others are always not
+	 * used if doing raw sampling.
+	 */
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0),
+				    LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, 0x1, LRADC_CTRL0);
+
+	/* Enable / disable the divider per requirement */
+	if (test_bit(chan, &lradc->is_divided))
+		mxs_lradc_reg_set(lradc,
+				  1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
+				  LRADC_CTRL2);
+	else
+		mxs_lradc_reg_clear(lradc,
+				    1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
+				    LRADC_CTRL2);
+
+	/* Clean the slot's previous content, then set new one. */
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0),
+			    LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, chan, LRADC_CTRL4);
+
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(0));
+
+	/* Enable the IRQ and start sampling the channel. */
+	mxs_lradc_reg_set(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, BIT(0), LRADC_CTRL0);
+
+	/* Wait for completion on the channel, 1 second max. */
+	ret = wait_for_completion_killable_timeout(&lradc->completion, HZ);
+	if (!ret)
+		ret = -ETIMEDOUT;
+	if (ret < 0)
+		goto err;
+
+	/* Read the data. */
+	*val = readl(lradc->base + LRADC_CH(0)) & LRADC_CH_VALUE_MASK;
+	ret = IIO_VAL_INT;
+
+err:
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ_EN(0), LRADC_CTRL1);
+
+	mutex_unlock(&lradc->lock);
+
+	return ret;
+}
+
+static int mxs_lradc_read_temp(struct iio_dev *iio_dev, int *val)
+{
+	int ret, min, max;
+
+	ret = mxs_lradc_read_single(iio_dev, 8, &min);
+	if (ret != IIO_VAL_INT)
+		return ret;
+
+	ret = mxs_lradc_read_single(iio_dev, 9, &max);
+	if (ret != IIO_VAL_INT)
+		return ret;
+
+	*val = max - min;
+
+	return IIO_VAL_INT;
+}
+
+static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
+			      const struct iio_chan_spec *chan,
+			      int *val, int *val2, long m)
+{
+	struct mxs_lradc *lradc = iio_priv(iio_dev);
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type == IIO_TEMP)
+			return mxs_lradc_read_temp(iio_dev, val);
+
+		return mxs_lradc_read_single(iio_dev, chan->channel, val);
+
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_TEMP) {
+			/*
+			 * From the datasheet, we have to multiply by 1.012 and
+			 * divide by 4
+			 */
+			*val = 0;
+			*val2 = 253000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+
+		*val = lradc->vref_mv[chan->channel];
+		*val2 = chan->scan_type.realbits -
+			test_bit(chan->channel, &lradc->is_divided);
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP) {
+			/*
+			 * The calculated value from the ADC is in Kelvin, we
+			 * want Celsius for hwmon so the offset is -273.15
+			 * The offset is applied before scaling so it is
+			 * actually -213.15 * 4 / 1.012 = -1079.644268
+			 */
+			*val = -1079;
+			*val2 = 644268;
+
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+
+		return -EINVAL;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int mxs_lradc_write_raw(struct iio_dev *iio_dev,
+			       const struct iio_chan_spec *chan,
+			       int val, int val2, long m)
+{
+	struct mxs_lradc *lradc = iio_priv(iio_dev);
+	struct mxs_lradc_scale *scale_avail =
+			lradc->scale_avail[chan->channel];
+	int ret;
+
+	ret = mutex_trylock(&lradc->lock);
+	if (!ret)
+		return -EBUSY;
+
+	switch (m) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = -EINVAL;
+		if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer &&
+		    val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) {
+			/* divider by two disabled */
+			clear_bit(chan->channel, &lradc->is_divided);
+			ret = 0;
+		} else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer &&
+			   val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) {
+			/* divider by two enabled */
+			set_bit(chan->channel, &lradc->is_divided);
+			ret = 0;
+		}
+
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&lradc->lock);
+
+	return ret;
+}
+
+static int mxs_lradc_write_raw_get_fmt(struct iio_dev *iio_dev,
+				       const struct iio_chan_spec *chan,
+				       long m)
+{
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static ssize_t mxs_lradc_show_scale_available_ch(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf,
+						 int ch)
+{
+	struct iio_dev *iio = dev_to_iio_dev(dev);
+	struct mxs_lradc *lradc = iio_priv(iio);
+	int i, len = 0;
+
+	for (i = 0; i < ARRAY_SIZE(lradc->scale_avail[ch]); i++)
+		len += sprintf(buf + len, "%u.%09u ",
+			       lradc->scale_avail[ch][i].integer,
+			       lradc->scale_avail[ch][i].nano);
+
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static ssize_t mxs_lradc_show_scale_available(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr);
+
+	return mxs_lradc_show_scale_available_ch(dev, attr, buf,
+						 iio_attr->address);
+}
+
+#define SHOW_SCALE_AVAILABLE_ATTR(ch)					\
+static IIO_DEVICE_ATTR(in_voltage##ch##_scale_available, S_IRUGO,	\
+		       mxs_lradc_show_scale_available, NULL, ch)
+
+SHOW_SCALE_AVAILABLE_ATTR(0);
+SHOW_SCALE_AVAILABLE_ATTR(1);
+SHOW_SCALE_AVAILABLE_ATTR(2);
+SHOW_SCALE_AVAILABLE_ATTR(3);
+SHOW_SCALE_AVAILABLE_ATTR(4);
+SHOW_SCALE_AVAILABLE_ATTR(5);
+SHOW_SCALE_AVAILABLE_ATTR(6);
+SHOW_SCALE_AVAILABLE_ATTR(7);
+SHOW_SCALE_AVAILABLE_ATTR(10);
+SHOW_SCALE_AVAILABLE_ATTR(11);
+SHOW_SCALE_AVAILABLE_ATTR(12);
+SHOW_SCALE_AVAILABLE_ATTR(13);
+SHOW_SCALE_AVAILABLE_ATTR(14);
+SHOW_SCALE_AVAILABLE_ATTR(15);
+
+static struct attribute *mxs_lradc_attributes[] = {
+	&iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage1_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage2_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage3_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage4_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage5_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage6_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage7_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage10_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage11_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage12_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage13_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage14_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage15_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group mxs_lradc_attribute_group = {
+	.attrs = mxs_lradc_attributes,
+};
+
+static const struct iio_info mxs_lradc_iio_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= mxs_lradc_read_raw,
+	.write_raw		= mxs_lradc_write_raw,
+	.write_raw_get_fmt	= mxs_lradc_write_raw_get_fmt,
+	.attrs			= &mxs_lradc_attribute_group,
+};
+
+static int mxs_lradc_ts_open(struct input_dev *dev)
+{
+	struct mxs_lradc *lradc = input_get_drvdata(dev);
+
+	/* Enable the touch-detect circuitry. */
+	mxs_lradc_enable_touch_detection(lradc);
+
+	return 0;
+}
+
+static void mxs_lradc_disable_ts(struct mxs_lradc *lradc)
+{
+	/* stop all interrupts from firing */
+	mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
+
+	/* Power-down touchscreen touch-detect circuitry. */
+	mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
+}
+
+static void mxs_lradc_ts_close(struct input_dev *dev)
+{
+	struct mxs_lradc *lradc = input_get_drvdata(dev);
+
+	mxs_lradc_disable_ts(lradc);
+}
+
+static int mxs_lradc_ts_register(struct mxs_lradc *lradc)
+{
+	struct input_dev *input;
+	struct device *dev = lradc->dev;
+	int ret;
+
+	if (!lradc->use_touchscreen)
+		return 0;
+
+	input = input_allocate_device();
+	if (!input)
+		return -ENOMEM;
+
+	input->name = DRIVER_NAME;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = dev;
+	input->open = mxs_lradc_ts_open;
+	input->close = mxs_lradc_ts_close;
+
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_TOUCH, input->keybit);
+	input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK,
+			     0, 0);
+
+	lradc->ts_input = input;
+	input_set_drvdata(input, lradc);
+	ret = input_register_device(input);
+	if (ret)
+		input_free_device(lradc->ts_input);
+
+	return ret;
+}
+
+static void mxs_lradc_ts_unregister(struct mxs_lradc *lradc)
+{
+	if (!lradc->use_touchscreen)
+		return;
+
+	mxs_lradc_disable_ts(lradc);
+	input_unregister_device(lradc->ts_input);
+}
+
+/*
+ * IRQ Handling
+ */
+static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
+{
+	struct iio_dev *iio = data;
+	struct mxs_lradc *lradc = iio_priv(iio);
+	unsigned long reg = readl(lradc->base + LRADC_CTRL1);
+	u32 clr_irq = mxs_lradc_irq_mask(lradc);
+	const u32 ts_irq_mask =
+		LRADC_CTRL1_TOUCH_DETECT_IRQ |
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+		LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2);
+
+	if (!(reg & mxs_lradc_irq_mask(lradc)))
+		return IRQ_NONE;
+
+	if (lradc->use_touchscreen && (reg & ts_irq_mask)) {
+		mxs_lradc_handle_touch(lradc);
+
+		/* Make sure we don't clear the next conversion's interrupt. */
+		clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
+				LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2));
+	}
+
+	if (iio_buffer_enabled(iio)) {
+		if (reg & lradc->buffer_vchans)
+			iio_trigger_poll(iio->trig);
+	} else if (reg & LRADC_CTRL1_LRADC_IRQ(0)) {
+		complete(&lradc->completion);
+	}
+
+	mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Trigger handling
+ */
+static irqreturn_t mxs_lradc_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio = pf->indio_dev;
+	struct mxs_lradc *lradc = iio_priv(iio);
+	const u32 chan_value = LRADC_CH_ACCUMULATE |
+		((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
+	unsigned int i, j = 0;
+
+	for_each_set_bit(i, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
+		lradc->buffer[j] = readl(lradc->base + LRADC_CH(j));
+		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(j));
+		lradc->buffer[j] &= LRADC_CH_VALUE_MASK;
+		lradc->buffer[j] /= LRADC_DELAY_TIMER_LOOP;
+		j++;
+	}
+
+	iio_push_to_buffers_with_timestamp(iio, lradc->buffer, pf->timestamp);
+
+	iio_trigger_notify_done(iio->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int mxs_lradc_configure_trigger(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *iio = iio_trigger_get_drvdata(trig);
+	struct mxs_lradc *lradc = iio_priv(iio);
+	const u32 st = state ? STMP_OFFSET_REG_SET : STMP_OFFSET_REG_CLR;
+
+	mxs_lradc_reg_wrt(lradc, LRADC_DELAY_KICK, LRADC_DELAY(0) + st);
+
+	return 0;
+}
+
+static const struct iio_trigger_ops mxs_lradc_trigger_ops = {
+	.owner = THIS_MODULE,
+	.set_trigger_state = &mxs_lradc_configure_trigger,
+};
+
+static int mxs_lradc_trigger_init(struct iio_dev *iio)
+{
+	int ret;
+	struct iio_trigger *trig;
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	trig = iio_trigger_alloc("%s-dev%i", iio->name, iio->id);
+	if (!trig)
+		return -ENOMEM;
+
+	trig->dev.parent = lradc->dev;
+	iio_trigger_set_drvdata(trig, iio);
+	trig->ops = &mxs_lradc_trigger_ops;
+
+	ret = iio_trigger_register(trig);
+	if (ret) {
+		iio_trigger_free(trig);
+		return ret;
+	}
+
+	lradc->trig = trig;
+
+	return 0;
+}
+
+static void mxs_lradc_trigger_remove(struct iio_dev *iio)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	iio_trigger_unregister(lradc->trig);
+	iio_trigger_free(lradc->trig);
+}
+
+static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+	int ret = 0, chan, ofs = 0;
+	unsigned long enable = 0;
+	u32 ctrl4_set = 0;
+	u32 ctrl4_clr = 0;
+	u32 ctrl1_irq = 0;
+	const u32 chan_value = LRADC_CH_ACCUMULATE |
+		((LRADC_DELAY_TIMER_LOOP - 1) << LRADC_CH_NUM_SAMPLES_OFFSET);
+	const int len = bitmap_weight(iio->active_scan_mask,
+			LRADC_MAX_TOTAL_CHANS);
+
+	if (!len)
+		return -EINVAL;
+
+	/*
+	 * Lock the driver so raw access can not be done during buffered
+	 * operation. This simplifies the code a lot.
+	 */
+	ret = mutex_trylock(&lradc->lock);
+	if (!ret)
+		return -EBUSY;
+
+	lradc->buffer = kmalloc_array(len, sizeof(*lradc->buffer), GFP_KERNEL);
+	if (!lradc->buffer) {
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(
+			lradc,
+			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
+			LRADC_CTRL1);
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
+
+	for_each_set_bit(chan, iio->active_scan_mask, LRADC_MAX_TOTAL_CHANS) {
+		ctrl4_set |= chan << LRADC_CTRL4_LRADCSELECT_OFFSET(ofs);
+		ctrl4_clr |= LRADC_CTRL4_LRADCSELECT_MASK(ofs);
+		ctrl1_irq |= LRADC_CTRL1_LRADC_IRQ_EN(ofs);
+		mxs_lradc_reg_wrt(lradc, chan_value, LRADC_CH(ofs));
+		bitmap_set(&enable, ofs, 1);
+		ofs++;
+	}
+
+	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
+			    LRADC_DELAY_KICK, LRADC_DELAY(0));
+	mxs_lradc_reg_clear(lradc, ctrl4_clr, LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, ctrl4_set, LRADC_CTRL4);
+	mxs_lradc_reg_set(lradc, ctrl1_irq, LRADC_CTRL1);
+	mxs_lradc_reg_set(lradc, enable << LRADC_DELAY_TRIGGER_LRADCS_OFFSET,
+			  LRADC_DELAY(0));
+
+	return 0;
+
+err_mem:
+	mutex_unlock(&lradc->lock);
+	return ret;
+}
+
+static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	mxs_lradc_reg_clear(lradc, LRADC_DELAY_TRIGGER_LRADCS_MASK |
+			    LRADC_DELAY_KICK, LRADC_DELAY(0));
+
+	mxs_lradc_reg_clear(lradc, lradc->buffer_vchans, LRADC_CTRL0);
+	if (lradc->soc == IMX28_LRADC)
+		mxs_lradc_reg_clear(
+			lradc,
+			lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
+			LRADC_CTRL1);
+
+	kfree(lradc->buffer);
+	mutex_unlock(&lradc->lock);
+
+	return 0;
+}
+
+static bool mxs_lradc_validate_scan_mask(struct iio_dev *iio,
+					 const unsigned long *mask)
+{
+	struct mxs_lradc *lradc = iio_priv(iio);
+	const int map_chans = bitmap_weight(mask, LRADC_MAX_TOTAL_CHANS);
+	int rsvd_chans = 0;
+	unsigned long rsvd_mask = 0;
+
+	if (lradc->use_touchbutton)
+		rsvd_mask |= CHAN_MASK_TOUCHBUTTON;
+	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_4WIRE)
+		rsvd_mask |= CHAN_MASK_TOUCHSCREEN_4WIRE;
+	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+		rsvd_mask |= CHAN_MASK_TOUCHSCREEN_5WIRE;
+
+	if (lradc->use_touchbutton)
+		rsvd_chans++;
+	if (lradc->use_touchscreen)
+		rsvd_chans += 2;
+
+	/* Test for attempts to map channels with special mode of operation. */
+	if (bitmap_intersects(mask, &rsvd_mask, LRADC_MAX_TOTAL_CHANS))
+		return false;
+
+	/* Test for attempts to map more channels then available slots. */
+	if (map_chans + rsvd_chans > LRADC_MAX_MAPPED_CHANS)
+		return false;
+
+	return true;
+}
+
+static const struct iio_buffer_setup_ops mxs_lradc_buffer_ops = {
+	.preenable = &mxs_lradc_buffer_preenable,
+	.postenable = &iio_triggered_buffer_postenable,
+	.predisable = &iio_triggered_buffer_predisable,
+	.postdisable = &mxs_lradc_buffer_postdisable,
+	.validate_scan_mask = &mxs_lradc_validate_scan_mask,
+};
+
+/*
+ * Driver initialization
+ */
+
+#define MXS_ADC_CHAN(idx, chan_type, name) {			\
+	.type = (chan_type),					\
+	.indexed = 1,						\
+	.scan_index = (idx),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			      BIT(IIO_CHAN_INFO_SCALE),		\
+	.channel = (idx),					\
+	.address = (idx),					\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = LRADC_RESOLUTION,			\
+		.storagebits = 32,				\
+	},							\
+	.datasheet_name = (name),				\
+}
+
+static const struct iio_chan_spec mx23_lradc_chan_spec[] = {
+	MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"),
+	MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"),
+	MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"),
+	MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"),
+	MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"),
+	MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"),
+	MXS_ADC_CHAN(6, IIO_VOLTAGE, "VDDIO"),
+	MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"),
+	/* Combined Temperature sensors */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = 8,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_OFFSET) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.channel = 8,
+		.scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
+		.datasheet_name = "TEMP_DIE",
+	},
+	/* Hidden channel to keep indexes */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = -1,
+		.channel = 9,
+	},
+	MXS_ADC_CHAN(10, IIO_VOLTAGE, NULL),
+	MXS_ADC_CHAN(11, IIO_VOLTAGE, NULL),
+	MXS_ADC_CHAN(12, IIO_VOLTAGE, "USB_DP"),
+	MXS_ADC_CHAN(13, IIO_VOLTAGE, "USB_DN"),
+	MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"),
+	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
+};
+
+static const struct iio_chan_spec mx28_lradc_chan_spec[] = {
+	MXS_ADC_CHAN(0, IIO_VOLTAGE, "LRADC0"),
+	MXS_ADC_CHAN(1, IIO_VOLTAGE, "LRADC1"),
+	MXS_ADC_CHAN(2, IIO_VOLTAGE, "LRADC2"),
+	MXS_ADC_CHAN(3, IIO_VOLTAGE, "LRADC3"),
+	MXS_ADC_CHAN(4, IIO_VOLTAGE, "LRADC4"),
+	MXS_ADC_CHAN(5, IIO_VOLTAGE, "LRADC5"),
+	MXS_ADC_CHAN(6, IIO_VOLTAGE, "LRADC6"),
+	MXS_ADC_CHAN(7, IIO_VOLTAGE, "VBATT"),
+	/* Combined Temperature sensors */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = 8,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_OFFSET) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.channel = 8,
+		.scan_type = {.sign = 'u', .realbits = 18, .storagebits = 32,},
+		.datasheet_name = "TEMP_DIE",
+	},
+	/* Hidden channel to keep indexes */
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.scan_index = -1,
+		.channel = 9,
+	},
+	MXS_ADC_CHAN(10, IIO_VOLTAGE, "VDDIO"),
+	MXS_ADC_CHAN(11, IIO_VOLTAGE, "VTH"),
+	MXS_ADC_CHAN(12, IIO_VOLTAGE, "VDDA"),
+	MXS_ADC_CHAN(13, IIO_VOLTAGE, "VDDD"),
+	MXS_ADC_CHAN(14, IIO_VOLTAGE, "VBG"),
+	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
+};
+
+static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
+{
+	/* The ADC always uses DELAY CHANNEL 0. */
+	const u32 adc_cfg =
+		(1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) |
+		(LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET);
+
+	int ret = stmp_reset_block(lradc->base);
+
+	if (ret)
+		return ret;
+
+	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
+	mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0));
+
+	/* Disable remaining DELAY CHANNELs */
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(1));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
+
+	/* Configure the touchscreen type */
+	if (lradc->soc == IMX28_LRADC) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				    LRADC_CTRL0);
+
+	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+		mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				  LRADC_CTRL0);
+	}
+
+	/* Start internal temperature sensing. */
+	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);
+
+	return 0;
+}
+
+static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
+{
+	int i;
+
+	mxs_lradc_reg_clear(lradc, mxs_lradc_irq_en_mask(lradc), LRADC_CTRL1);
+
+	for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++)
+		mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(i));
+}
+
+static const struct of_device_id mxs_lradc_dt_ids[] = {
+	{ .compatible = "fsl,imx23-lradc", .data = (void *)IMX23_LRADC, },
+	{ .compatible = "fsl,imx28-lradc", .data = (void *)IMX28_LRADC, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);
+
+static int mxs_lradc_probe_touchscreen(struct mxs_lradc *lradc,
+				       struct device_node *lradc_node)
+{
+	int ret;
+	u32 ts_wires = 0, adapt;
+
+	ret = of_property_read_u32(lradc_node, "fsl,lradc-touchscreen-wires",
+				   &ts_wires);
+	if (ret)
+		return -ENODEV; /* touchscreen feature disabled */
+
+	switch (ts_wires) {
+	case 4:
+		lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_4WIRE;
+		break;
+	case 5:
+		if (lradc->soc == IMX28_LRADC) {
+			lradc->use_touchscreen = MXS_LRADC_TOUCHSCREEN_5WIRE;
+			break;
+		}
+		/* fall through an error message for i.MX23 */
+	default:
+		dev_err(lradc->dev,
+			"Unsupported number of touchscreen wires (%d)\n",
+			ts_wires);
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(lradc_node, "fsl,ave-ctrl", &adapt)) {
+		lradc->over_sample_cnt = 4;
+	} else {
+		if (adapt < 1 || adapt > 32) {
+			dev_err(lradc->dev, "Invalid sample count (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
+		lradc->over_sample_cnt = adapt;
+	}
+
+	if (of_property_read_u32(lradc_node, "fsl,ave-delay", &adapt)) {
+		lradc->over_sample_delay = 2;
+	} else {
+		if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) {
+			dev_err(lradc->dev, "Invalid sample delay (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
+		lradc->over_sample_delay = adapt;
+	}
+
+	if (of_property_read_u32(lradc_node, "fsl,settling", &adapt)) {
+		lradc->settling_delay = 10;
+	} else {
+		if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) {
+			dev_err(lradc->dev, "Invalid settling delay (%u)\n",
+				adapt);
+			return -EINVAL;
+		}
+		lradc->settling_delay = adapt;
+	}
+
+	return 0;
+}
+
+static int mxs_lradc_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *of_id =
+		of_match_device(mxs_lradc_dt_ids, &pdev->dev);
+	const struct mxs_lradc_of_config *of_cfg =
+		&mxs_lradc_of_config[(enum mxs_lradc_id)of_id->data];
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct mxs_lradc *lradc;
+	struct iio_dev *iio;
+	struct resource *iores;
+	int ret = 0, touch_ret;
+	int i, s;
+	u64 scale_uv;
+
+	/* Allocate the IIO device. */
+	iio = devm_iio_device_alloc(dev, sizeof(*lradc));
+	if (!iio) {
+		dev_err(dev, "Failed to allocate IIO device\n");
+		return -ENOMEM;
+	}
+
+	lradc = iio_priv(iio);
+	lradc->soc = (enum mxs_lradc_id)of_id->data;
+
+	/* Grab the memory area */
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lradc->dev = &pdev->dev;
+	lradc->base = devm_ioremap_resource(dev, iores);
+	if (IS_ERR(lradc->base))
+		return PTR_ERR(lradc->base);
+
+	lradc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(lradc->clk)) {
+		dev_err(dev, "Failed to get the delay unit clock\n");
+		return PTR_ERR(lradc->clk);
+	}
+	ret = clk_prepare_enable(lradc->clk);
+	if (ret != 0) {
+		dev_err(dev, "Failed to enable the delay unit clock\n");
+		return ret;
+	}
+
+	touch_ret = mxs_lradc_probe_touchscreen(lradc, node);
+
+	if (touch_ret == 0)
+		lradc->buffer_vchans = BUFFER_VCHANS_LIMITED;
+	else
+		lradc->buffer_vchans = BUFFER_VCHANS_ALL;
+
+	/* Grab all IRQ sources */
+	for (i = 0; i < of_cfg->irq_count; i++) {
+		lradc->irq[i] = platform_get_irq(pdev, i);
+		if (lradc->irq[i] < 0) {
+			ret = lradc->irq[i];
+			goto err_clk;
+		}
+
+		ret = devm_request_irq(dev, lradc->irq[i],
+				       mxs_lradc_handle_irq, 0,
+				       of_cfg->irq_name[i], iio);
+		if (ret)
+			goto err_clk;
+	}
+
+	lradc->vref_mv = of_cfg->vref_mv;
+
+	platform_set_drvdata(pdev, iio);
+
+	init_completion(&lradc->completion);
+	mutex_init(&lradc->lock);
+
+	iio->name = pdev->name;
+	iio->dev.parent = &pdev->dev;
+	iio->info = &mxs_lradc_iio_info;
+	iio->modes = INDIO_DIRECT_MODE;
+	iio->masklength = LRADC_MAX_TOTAL_CHANS;
+
+	if (lradc->soc == IMX23_LRADC) {
+		iio->channels = mx23_lradc_chan_spec;
+		iio->num_channels = ARRAY_SIZE(mx23_lradc_chan_spec);
+	} else {
+		iio->channels = mx28_lradc_chan_spec;
+		iio->num_channels = ARRAY_SIZE(mx28_lradc_chan_spec);
+	}
+
+	ret = iio_triggered_buffer_setup(iio, &iio_pollfunc_store_time,
+					 &mxs_lradc_trigger_handler,
+					 &mxs_lradc_buffer_ops);
+	if (ret)
+		goto err_clk;
+
+	ret = mxs_lradc_trigger_init(iio);
+	if (ret)
+		goto err_trig;
+
+	/* Populate available ADC input ranges */
+	for (i = 0; i < LRADC_MAX_TOTAL_CHANS; i++) {
+		for (s = 0; s < ARRAY_SIZE(lradc->scale_avail[i]); s++) {
+			/*
+			 * [s=0] = optional divider by two disabled (default)
+			 * [s=1] = optional divider by two enabled
+			 *
+			 * The scale is calculated by doing:
+			 *   Vref >> (realbits - s)
+			 * which multiplies by two on the second component
+			 * of the array.
+			 */
+			scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >>
+				   (LRADC_RESOLUTION - s);
+			lradc->scale_avail[i][s].nano =
+					do_div(scale_uv, 100000000) * 10;
+			lradc->scale_avail[i][s].integer = scale_uv;
+		}
+	}
+
+	/* Configure the hardware. */
+	ret = mxs_lradc_hw_init(lradc);
+	if (ret)
+		goto err_dev;
+
+	/* Register the touchscreen input device. */
+	if (touch_ret == 0) {
+		ret = mxs_lradc_ts_register(lradc);
+		if (ret)
+			goto err_ts_register;
+	}
+
+	/* Register IIO device. */
+	ret = iio_device_register(iio);
+	if (ret) {
+		dev_err(dev, "Failed to register IIO device\n");
+		goto err_ts;
+	}
+
+	return 0;
+
+err_ts:
+	mxs_lradc_ts_unregister(lradc);
+err_ts_register:
+	mxs_lradc_hw_stop(lradc);
+err_dev:
+	mxs_lradc_trigger_remove(iio);
+err_trig:
+	iio_triggered_buffer_cleanup(iio);
+err_clk:
+	clk_disable_unprepare(lradc->clk);
+	return ret;
+}
+
+static int mxs_lradc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *iio = platform_get_drvdata(pdev);
+	struct mxs_lradc *lradc = iio_priv(iio);
+
+	iio_device_unregister(iio);
+	mxs_lradc_ts_unregister(lradc);
+	mxs_lradc_hw_stop(lradc);
+	mxs_lradc_trigger_remove(iio);
+	iio_triggered_buffer_cleanup(iio);
+
+	clk_disable_unprepare(lradc->clk);
+
+	return 0;
+}
+
+static struct platform_driver mxs_lradc_driver = {
+	.driver	= {
+		.name	= DRIVER_NAME,
+		.of_match_table = mxs_lradc_dt_ids,
+	},
+	.probe	= mxs_lradc_probe,
+	.remove	= mxs_lradc_remove,
+};
+
+module_platform_driver(mxs_lradc_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Freescale MXS LRADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index f42eb8a7d21f..2bbf0c521beb 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -534,7 +534,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
 	}
 	ret = request_threaded_irq(adc->irq, NULL,
 		palmas_gpadc_irq,
-		IRQF_ONESHOT | IRQF_EARLY_RESUME, dev_name(adc->dev),
+		IRQF_ONESHOT, dev_name(adc->dev),
 		adc);
 	if (ret < 0) {
 		dev_err(adc->dev,
@@ -549,7 +549,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
 		adc->irq_auto_0 =  platform_get_irq(pdev, 1);
 		ret = request_threaded_irq(adc->irq_auto_0, NULL,
 				palmas_gpadc_irq_auto,
-				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				IRQF_ONESHOT,
 				"palmas-adc-auto-0", adc);
 		if (ret < 0) {
 			dev_err(adc->dev, "request auto0 irq %d failed: %d\n",
@@ -565,7 +565,7 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
 		adc->irq_auto_1 =  platform_get_irq(pdev, 2);
 		ret = request_threaded_irq(adc->irq_auto_1, NULL,
 				palmas_gpadc_irq_auto,
-				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				IRQF_ONESHOT,
 				"palmas-adc-auto-1", adc);
 		if (ret < 0) {
 			dev_err(adc->dev, "request auto1 irq %d failed: %d\n",
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
index 2c8374f86252..ecbc12138d58 100644
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -73,7 +73,7 @@ static int adc081c_probe(struct i2c_client *client,
 	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
-		return -ENODEV;
+		return -EOPNOTSUPP;
 
 	iio = devm_iio_device_alloc(&client->dev, sizeof(*adc));
 	if (!iio)
diff --git a/drivers/iio/adc/ti-adc0832.c b/drivers/iio/adc/ti-adc0832.c
new file mode 100644
index 000000000000..0afeac0c9bad
--- /dev/null
+++ b/drivers/iio/adc/ti-adc0832.c
@@ -0,0 +1,288 @@
+/*
+ * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver
+ *
+ * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/adc0832-n.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/regulator/consumer.h>
+
+enum {
+	adc0831,
+	adc0832,
+	adc0834,
+	adc0838,
+};
+
+struct adc0832 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	struct mutex lock;
+	u8 mux_bits;
+
+	u8 tx_buf[2] ____cacheline_aligned;
+	u8 rx_buf[2];
+};
+
+#define ADC0832_VOLTAGE_CHANNEL(chan)					\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE)	\
+	}
+
+#define ADC0832_VOLTAGE_CHANNEL_DIFF(chan1, chan2)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE)	\
+	}
+
+static const struct iio_chan_spec adc0831_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+};
+
+static const struct iio_chan_spec adc0832_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL(0),
+	ADC0832_VOLTAGE_CHANNEL(1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0),
+};
+
+static const struct iio_chan_spec adc0834_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL(0),
+	ADC0832_VOLTAGE_CHANNEL(1),
+	ADC0832_VOLTAGE_CHANNEL(2),
+	ADC0832_VOLTAGE_CHANNEL(3),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2),
+};
+
+static const struct iio_chan_spec adc0838_channels[] = {
+	ADC0832_VOLTAGE_CHANNEL(0),
+	ADC0832_VOLTAGE_CHANNEL(1),
+	ADC0832_VOLTAGE_CHANNEL(2),
+	ADC0832_VOLTAGE_CHANNEL(3),
+	ADC0832_VOLTAGE_CHANNEL(4),
+	ADC0832_VOLTAGE_CHANNEL(5),
+	ADC0832_VOLTAGE_CHANNEL(6),
+	ADC0832_VOLTAGE_CHANNEL(7),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(4, 5),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(5, 4),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(6, 7),
+	ADC0832_VOLTAGE_CHANNEL_DIFF(7, 6),
+};
+
+static int adc0831_adc_conversion(struct adc0832 *adc)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	/*
+	 * Skip TRI-STATE and a leading zero
+	 */
+	return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6);
+}
+
+static int adc0832_adc_conversion(struct adc0832 *adc, int channel,
+				bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	struct spi_transfer xfer = {
+		.tx_buf = adc->tx_buf,
+		.rx_buf = adc->rx_buf,
+		.len = 2,
+	};
+	int ret;
+
+	if (!adc->mux_bits)
+		return adc0831_adc_conversion(adc);
+
+	/* start bit */
+	adc->tx_buf[0] = 1 << (adc->mux_bits + 1);
+	/* single-ended or differential */
+	adc->tx_buf[0] |= differential ? 0 : (1 << adc->mux_bits);
+	/* odd / sign */
+	adc->tx_buf[0] |= (channel % 2) << (adc->mux_bits - 1);
+	/* select */
+	if (adc->mux_bits > 1)
+		adc->tx_buf[0] |= channel / 2;
+
+	/* align Data output BIT7 (MSB) to 8-bit boundary */
+	adc->tx_buf[0] <<= 1;
+
+	ret = spi_sync_transfer(spi, &xfer, 1);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf[1];
+}
+
+static int adc0832_read_raw(struct iio_dev *iio,
+			struct iio_chan_spec const *channel, int *value,
+			int *shift, long mask)
+{
+	struct adc0832 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = adc0832_adc_conversion(adc, channel->channel,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 8;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info adc0832_info = {
+	.read_raw = adc0832_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int adc0832_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adc0832 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->info = &adc0832_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	switch (spi_get_device_id(spi)->driver_data) {
+	case adc0831:
+		adc->mux_bits = 0;
+		indio_dev->channels = adc0831_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0831_channels);
+		break;
+	case adc0832:
+		adc->mux_bits = 1;
+		indio_dev->channels = adc0832_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0832_channels);
+		break;
+	case adc0834:
+		adc->mux_bits = 2;
+		indio_dev->channels = adc0834_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0834_channels);
+		break;
+	case adc0838:
+		adc->mux_bits = 3;
+		indio_dev->channels = adc0838_channels;
+		indio_dev->num_channels = ARRAY_SIZE(adc0838_channels);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		regulator_disable(adc->reg);
+
+	return ret;
+}
+
+static int adc0832_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct adc0832 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+
+static const struct of_device_id adc0832_dt_ids[] = {
+	{ .compatible = "ti,adc0831", },
+	{ .compatible = "ti,adc0832", },
+	{ .compatible = "ti,adc0834", },
+	{ .compatible = "ti,adc0838", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, adc0832_dt_ids);
+
+#endif
+
+static const struct spi_device_id adc0832_id[] = {
+	{ "adc0831", adc0831 },
+	{ "adc0832", adc0832 },
+	{ "adc0834", adc0834 },
+	{ "adc0838", adc0838 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adc0832_id);
+
+static struct spi_driver adc0832_driver = {
+	.driver = {
+		.name = "adc0832",
+		.of_match_table = of_match_ptr(adc0832_dt_ids),
+	},
+	.probe = adc0832_probe,
+	.remove = adc0832_remove,
+	.id_table = adc0832_id,
+};
+module_spi_driver(adc0832_driver);
+
+MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
+MODULE_DESCRIPTION("ADC0831/ADC0832/ADC0834/ADC0838 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
new file mode 100644
index 000000000000..73cbf0b54e54
--- /dev/null
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -0,0 +1,612 @@
+/*
+ * ADS1015 - Texas Instruments Analog-to-Digital Converter
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * IIO driver for ADS1015 ADC 7-bit I2C slave address:
+ *	* 0x48 - ADDR connected to Ground
+ *	* 0x49 - ADDR connected to Vdd
+ *	* 0x4A - ADDR connected to SDA
+ *	* 0x4B - ADDR connected to SCL
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/pm_runtime.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <linux/i2c/ads1015.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define ADS1015_DRV_NAME "ads1015"
+
+#define ADS1015_CONV_REG	0x00
+#define ADS1015_CFG_REG		0x01
+
+#define ADS1015_CFG_DR_SHIFT	5
+#define ADS1015_CFG_MOD_SHIFT	8
+#define ADS1015_CFG_PGA_SHIFT	9
+#define ADS1015_CFG_MUX_SHIFT	12
+
+#define ADS1015_CFG_DR_MASK	GENMASK(7, 5)
+#define ADS1015_CFG_MOD_MASK	BIT(8)
+#define ADS1015_CFG_PGA_MASK	GENMASK(11, 9)
+#define ADS1015_CFG_MUX_MASK	GENMASK(14, 12)
+
+/* device operating modes */
+#define ADS1015_CONTINUOUS	0
+#define ADS1015_SINGLESHOT	1
+
+#define ADS1015_SLEEP_DELAY_MS		2000
+#define ADS1015_DEFAULT_PGA		2
+#define ADS1015_DEFAULT_DATA_RATE	4
+#define ADS1015_DEFAULT_CHAN		0
+
+enum ads1015_channels {
+	ADS1015_AIN0_AIN1 = 0,
+	ADS1015_AIN0_AIN3,
+	ADS1015_AIN1_AIN3,
+	ADS1015_AIN2_AIN3,
+	ADS1015_AIN0,
+	ADS1015_AIN1,
+	ADS1015_AIN2,
+	ADS1015_AIN3,
+	ADS1015_TIMESTAMP,
+};
+
+static const unsigned int ads1015_data_rate[] = {
+	128, 250, 490, 920, 1600, 2400, 3300, 3300
+};
+
+static const struct {
+	int scale;
+	int uscale;
+} ads1015_scale[] = {
+	{3, 0},
+	{2, 0},
+	{1, 0},
+	{0, 500000},
+	{0, 250000},
+	{0, 125000},
+	{0, 125000},
+	{0, 125000},
+};
+
+#define ADS1015_V_CHAN(_chan, _addr) {				\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.address = _addr,					\
+	.channel = _chan,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+				BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = _addr,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 12,					\
+		.storagebits = 16,				\
+		.shift = 4,					\
+		.endianness = IIO_CPU,				\
+	},							\
+}
+
+#define ADS1015_V_DIFF_CHAN(_chan, _chan2, _addr) {		\
+	.type = IIO_VOLTAGE,					\
+	.differential = 1,					\
+	.indexed = 1,						\
+	.address = _addr,					\
+	.channel = _chan,					\
+	.channel2 = _chan2,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+				BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+	.scan_index = _addr,					\
+	.scan_type = {						\
+		.sign = 's',					\
+		.realbits = 12,					\
+		.storagebits = 16,				\
+		.shift = 4,					\
+		.endianness = IIO_CPU,				\
+	},							\
+}
+
+struct ads1015_data {
+	struct regmap *regmap;
+	/*
+	 * Protects ADC ops, e.g: concurrent sysfs/buffered
+	 * data reads, configuration updates
+	 */
+	struct mutex lock;
+	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
+};
+
+static bool ads1015_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return (reg == ADS1015_CFG_REG);
+}
+
+static const struct regmap_config ads1015_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = ADS1015_CFG_REG,
+	.writeable_reg = ads1015_is_writeable_reg,
+};
+
+static const struct iio_chan_spec ads1015_channels[] = {
+	ADS1015_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1),
+	ADS1015_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3),
+	ADS1015_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3),
+	ADS1015_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3),
+	ADS1015_V_CHAN(0, ADS1015_AIN0),
+	ADS1015_V_CHAN(1, ADS1015_AIN1),
+	ADS1015_V_CHAN(2, ADS1015_AIN2),
+	ADS1015_V_CHAN(3, ADS1015_AIN3),
+	IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
+};
+
+static int ads1015_set_power_state(struct ads1015_data *data, bool on)
+{
+	int ret;
+	struct device *dev = regmap_get_device(data->regmap);
+
+	if (on) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			pm_runtime_put_noidle(dev);
+	} else {
+		pm_runtime_mark_last_busy(dev);
+		ret = pm_runtime_put_autosuspend(dev);
+	}
+
+	return ret;
+}
+
+static
+int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
+{
+	int ret, pga, dr, conv_time;
+	bool change;
+
+	if (chan < 0 || chan >= ADS1015_CHANNELS)
+		return -EINVAL;
+
+	pga = data->channel_data[chan].pga;
+	dr = data->channel_data[chan].data_rate;
+
+	ret = regmap_update_bits_check(data->regmap, ADS1015_CFG_REG,
+				       ADS1015_CFG_MUX_MASK |
+				       ADS1015_CFG_PGA_MASK,
+				       chan << ADS1015_CFG_MUX_SHIFT |
+				       pga << ADS1015_CFG_PGA_SHIFT,
+				       &change);
+	if (ret < 0)
+		return ret;
+
+	if (change) {
+		conv_time = DIV_ROUND_UP(USEC_PER_SEC, ads1015_data_rate[dr]);
+		usleep_range(conv_time, conv_time + 1);
+	}
+
+	return regmap_read(data->regmap, ADS1015_CONV_REG, val);
+}
+
+static irqreturn_t ads1015_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ads1015_data *data = iio_priv(indio_dev);
+	s16 buf[8]; /* 1x s16 ADC val + 3x s16 padding +  4x s16 timestamp */
+	int chan, ret, res;
+
+	memset(buf, 0, sizeof(buf));
+
+	mutex_lock(&data->lock);
+	chan = find_first_bit(indio_dev->active_scan_mask,
+			      indio_dev->masklength);
+	ret = ads1015_get_adc_result(data, chan, &res);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		goto err;
+	}
+
+	buf[0] = res;
+	mutex_unlock(&data->lock);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int ads1015_set_scale(struct ads1015_data *data, int chan,
+			     int scale, int uscale)
+{
+	int i, ret, rindex = -1;
+
+	for (i = 0; i < ARRAY_SIZE(ads1015_scale); i++)
+		if (ads1015_scale[i].scale == scale &&
+		    ads1015_scale[i].uscale == uscale) {
+			rindex = i;
+			break;
+		}
+	if (rindex < 0)
+		return -EINVAL;
+
+	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				 ADS1015_CFG_PGA_MASK,
+				 rindex << ADS1015_CFG_PGA_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	data->channel_data[chan].pga = rindex;
+
+	return 0;
+}
+
+static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
+{
+	int i, ret, rindex = -1;
+
+	for (i = 0; i < ARRAY_SIZE(ads1015_data_rate); i++)
+		if (ads1015_data_rate[i] == rate) {
+			rindex = i;
+			break;
+		}
+	if (rindex < 0)
+		return -EINVAL;
+
+	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				 ADS1015_CFG_DR_MASK,
+				 rindex << ADS1015_CFG_DR_SHIFT);
+	if (ret < 0)
+		return ret;
+
+	data->channel_data[chan].data_rate = rindex;
+
+	return 0;
+}
+
+static int ads1015_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan, int *val,
+			    int *val2, long mask)
+{
+	int ret, idx;
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&data->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev)) {
+			ret = -EBUSY;
+			break;
+		}
+
+		ret = ads1015_set_power_state(data, true);
+		if (ret < 0)
+			break;
+
+		ret = ads1015_get_adc_result(data, chan->address, val);
+		if (ret < 0) {
+			ads1015_set_power_state(data, false);
+			break;
+		}
+
+		/* 12 bit res, D0 is bit 4 in conversion register */
+		*val = sign_extend32(*val >> 4, 11);
+
+		ret = ads1015_set_power_state(data, false);
+		if (ret < 0)
+			break;
+
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		idx = data->channel_data[chan->address].pga;
+		*val = ads1015_scale[idx].scale;
+		*val2 = ads1015_scale[idx].uscale;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		idx = data->channel_data[chan->address].data_rate;
+		*val = ads1015_data_rate[idx];
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	mutex_unlock(&data->lock);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static int ads1015_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int val,
+			     int val2, long mask)
+{
+	struct ads1015_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = ads1015_set_scale(data, chan->address, val, val2);
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = ads1015_set_data_rate(data, chan->address, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int ads1015_buffer_preenable(struct iio_dev *indio_dev)
+{
+	return ads1015_set_power_state(iio_priv(indio_dev), true);
+}
+
+static int ads1015_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	return ads1015_set_power_state(iio_priv(indio_dev), false);
+}
+
+static const struct iio_buffer_setup_ops ads1015_buffer_setup_ops = {
+	.preenable	= ads1015_buffer_preenable,
+	.postenable	= iio_triggered_buffer_postenable,
+	.predisable	= iio_triggered_buffer_predisable,
+	.postdisable	= ads1015_buffer_postdisable,
+	.validate_scan_mask = &iio_validate_scan_mask_onehot,
+};
+
+static IIO_CONST_ATTR(scale_available, "3 2 1 0.5 0.25 0.125");
+static IIO_CONST_ATTR(sampling_frequency_available,
+		      "128 250 490 920 1600 2400 3300");
+
+static struct attribute *ads1015_attributes[] = {
+	&iio_const_attr_scale_available.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ads1015_attribute_group = {
+	.attrs = ads1015_attributes,
+};
+
+static const struct iio_info ads1015_info = {
+	.driver_module	= THIS_MODULE,
+	.read_raw	= ads1015_read_raw,
+	.write_raw	= ads1015_write_raw,
+	.attrs		= &ads1015_attribute_group,
+};
+
+#ifdef CONFIG_OF
+static int ads1015_get_channels_config_of(struct i2c_client *client)
+{
+	struct ads1015_data *data = i2c_get_clientdata(client);
+	struct device_node *node;
+
+	if (!client->dev.of_node ||
+	    !of_get_next_child(client->dev.of_node, NULL))
+		return -EINVAL;
+
+	for_each_child_of_node(client->dev.of_node, node) {
+		u32 pval;
+		unsigned int channel;
+		unsigned int pga = ADS1015_DEFAULT_PGA;
+		unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
+
+		if (of_property_read_u32(node, "reg", &pval)) {
+			dev_err(&client->dev, "invalid reg on %s\n",
+				node->full_name);
+			continue;
+		}
+
+		channel = pval;
+		if (channel >= ADS1015_CHANNELS) {
+			dev_err(&client->dev,
+				"invalid channel index %d on %s\n",
+				channel, node->full_name);
+			continue;
+		}
+
+		if (!of_property_read_u32(node, "ti,gain", &pval)) {
+			pga = pval;
+			if (pga > 6) {
+				dev_err(&client->dev, "invalid gain on %s\n",
+					node->full_name);
+				return -EINVAL;
+			}
+		}
+
+		if (!of_property_read_u32(node, "ti,datarate", &pval)) {
+			data_rate = pval;
+			if (data_rate > 7) {
+				dev_err(&client->dev,
+					"invalid data_rate on %s\n",
+					node->full_name);
+				return -EINVAL;
+			}
+		}
+
+		data->channel_data[channel].pga = pga;
+		data->channel_data[channel].data_rate = data_rate;
+	}
+
+	return 0;
+}
+#endif
+
+static void ads1015_get_channels_config(struct i2c_client *client)
+{
+	unsigned int k;
+
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ads1015_data *data = iio_priv(indio_dev);
+	struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
+
+	/* prefer platform data */
+	if (pdata) {
+		memcpy(data->channel_data, pdata->channel_data,
+		       sizeof(data->channel_data));
+		return;
+	}
+
+#ifdef CONFIG_OF
+	if (!ads1015_get_channels_config_of(client))
+		return;
+#endif
+	/* fallback on default configuration */
+	for (k = 0; k < ADS1015_CHANNELS; ++k) {
+		data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
+		data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE;
+	}
+}
+
+static int ads1015_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct ads1015_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &ads1015_info;
+	indio_dev->name = ADS1015_DRV_NAME;
+	indio_dev->channels = ads1015_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads1015_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	/* we need to keep this ABI the same as used by hwmon ADS1015 driver */
+	ads1015_get_channels_config(client);
+
+	data->regmap = devm_regmap_init_i2c(client, &ads1015_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&client->dev, "Failed to allocate register map\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 ads1015_trigger_handler,
+					 &ads1015_buffer_setup_ops);
+	if (ret < 0) {
+		dev_err(&client->dev, "iio triggered buffer setup failed\n");
+		return ret;
+	}
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		goto err_buffer_cleanup;
+	pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+	pm_runtime_enable(&client->dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register IIO device\n");
+		goto err_buffer_cleanup;
+	}
+
+	return 0;
+
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
+}
+
+static int ads1015_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	/* power down single shot mode */
+	return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				  ADS1015_CFG_MOD_MASK,
+				  ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
+}
+
+#ifdef CONFIG_PM
+static int ads1015_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				  ADS1015_CFG_MOD_MASK,
+				  ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
+}
+
+static int ads1015_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct ads1015_data *data = iio_priv(indio_dev);
+
+	return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				  ADS1015_CFG_MOD_MASK,
+				  ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
+}
+#endif
+
+static const struct dev_pm_ops ads1015_pm_ops = {
+	SET_RUNTIME_PM_OPS(ads1015_runtime_suspend,
+			   ads1015_runtime_resume, NULL)
+};
+
+static const struct i2c_device_id ads1015_id[] = {
+	{"ads1015", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ads1015_id);
+
+static struct i2c_driver ads1015_driver = {
+	.driver = {
+		.name = ADS1015_DRV_NAME,
+		.pm = &ads1015_pm_ops,
+	},
+	.probe		= ads1015_probe,
+	.remove		= ads1015_remove,
+	.id_table	= ads1015_id,
+};
+
+module_i2c_driver(ads1015_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
+MODULE_DESCRIPTION("Texas Instruments ADS1015 ADC driver");
+MODULE_LICENSE("GPL v2");