Merge tag 'iio-for-4.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new device support, features and cleanups for IIO in the 4.11 cycle.

It's shaping to be another fairly busy cycle. Lots more on the way!

New device support
* ads7950
  - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954,
  ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs.
* cm3605
  - New driver for this light sensor and proximity sensor  which is an
  analog part with some additional digital controls.
* hx711
  - New driver.

Core new stuff
* Gravity sensor type.  This is a processed datastream in which the device
will try to work out which way is down.
* Split the buffer.h file into two parts. One provides the interface to 'use'
a buffer, the second provides the internals of the buffer functionality as
needed by implementations of buffers.
  - Move documentation inline so as to allow use of private: tag when
  generating documentation.
  - Add some utility functions for the few things that are directly done
  with the buffers.
  - Stop exporting functions that no-one uses outside of the core code.
  - Push docs down by the code in the c file where they should have always
  been.
  - Fix typo in kernel-doc for buffer.
  - push down some includes that were previously happening implicitly.
  - stop enabling the timestamp of the dummy device.

Features and cleanups
* ad5592r
  - ACPI support
* ad5593r
  -ACPI support.
* ad5933
  - Fix a false comment about size of a particular register.
* ad7150
  - replace S_IRUGO | S_IWUSR with 0644.  I'm not that keen on these patches
  in general, but as it was nicely presented I took this one anyway. As a
  general rule will only take these as part of a larger driver cleanup.
  - don't eat an error but rather reutnr it in the write_event_config callback.
* ad7606
  - replace non standard range attibute with _scale
* ade7753
  - use usleep_range for short sleeps
* ade7754
  - use usleep_range for short sleeps
* ade7758
  - use usleep_range for short sleeps
* ade7759
  - use usleep_range for short sleeps
* ade7854
  - use usleep_range for short sleeps
* adis16201
  - fix description
* adis16203
  - fix description
  - fix copyright year
* adis16209
  - fix description
* adt7316
  - Add braces to arms of if else statement (for consistency)
  - Alignment fixes.
* axp288
  - Fix up an issue with accidental overwrites of data.
* bmi160
  - add deivce tables for i2c and spi to support correctly identifying the
  full dt name (including manufacturer).
  - device tree binding.
* bmp280
  - use usleep_range for short sleeps.
* cm3232
  - return error from cm3232_reg_init rather than eating it if the last write
  fails.
* dummy driver
  - remove a semicolor found at end of a function defintition.
* exynos-adc
  - use usleep_range for short sleeps.
* hid-sensor (accel)
  - Add timestamp support.  The hardware can provide timestamps so lets support
  them. If not fall back to timestamps estimated in kernel.
* hid-sensor (light)
  - Add a duplicate ID for the light channels so as to keep existing interface
  whilst also using the more standard IIO interface.
* hts221
  - acpi probing
* imx25-gcq
  - Add a macro call to allow this driver to be automatically loaded.
* isl29028
  - reorganise code to avoid deep nesting of if statements.
  - move chip test and default regs into a function suitable or sharing with
  power management code.
  - tidy up some code alignment.
* lidar-lite-v3
  - introduce compatible strings that make it clear Garmin have consideral
  friends.
* mma8452
  - avoid returning signed value when unsigned is appropriate
* spmi-vadc
  - Update function for generic voltage conversion to take into account that
  different channels on this device should be handled differently.
  - Rework code to allow per channel voltage scaling and support the standard
  options for this hardware.
  - Fixup three minor issues with the above patches for this part. These all
  effect test builds rather than the native builds for the part, but good to
  clean them up anyway.
* st_sensors
  - support device matching from the ACPI DST tables.
  - acpi based probing for accelerometers
  - acpi based probing for pressure sensors
  - Allow pressure sensors to read negative values.
  - Export sampling frequency for lps25h and lps331ap.
  - Add support for the old DT bindings from the period when these deivces
  were often supported through windows.

Docs fixup:
* typo in sysfs-bus-iio

9 files changed, 1414 insertions, 160 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 9c8b558ba19e..8e7764c3cc84 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -247,6 +247,25 @@ config HI8435
 	  This driver can also be built as a module. If so, the module will be
 	  called hi8435.
 
+config HX711
+	tristate "AVIA HX711 ADC for weight cells"
+	depends on GPIOLIB
+	help
+	  If you say yes here you get support for AVIA HX711 ADC which is used
+	  for weigh cells
+
+	  This driver uses two GPIOs, one acts as the clock and controls the
+	  channel selection and gain, the other one is used for the measurement
+          data
+
+	  Currently the raw value is read from the chip and delivered.
+	  To get an actual weight one needs to subtract the
+	  zero offset and multiply by a scale factor.
+	  This should be done in userspace.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called hx711.
+
 config INA2XX_ADC
 	tristate "Texas Instruments INA2xx Power Monitors IIO driver"
 	depends on I2C && !SENSORS_INA2XX
@@ -549,6 +568,19 @@ config TI_ADS1015
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-ads1015.
 
+config TI_ADS7950
+	tristate "Texas Instruments ADS7950 ADC driver"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Texas Instruments ADS7950, ADS7951,
+	  ADS7952, ADS7953, ADS7954, ADS7955, ADS7956, ADS7957, ADS7958, ADS7959.
+	  ADS7960, ADS7961.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ti-ads7950.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index d36c4be8d1fc..260d083a2b3f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_ENVELOPE_DETECTOR) += envelope-detector.o
 obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
 obj-$(CONFIG_FSL_MX25_ADC) += fsl-imx25-gcq.o
 obj-$(CONFIG_HI8435) += hi8435.o
+obj-$(CONFIG_HX711) += hx711.o
 obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
 obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
@@ -51,6 +52,7 @@ obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
+obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
 obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
index 7fd24949c0c1..64799ad7ebad 100644
--- a/drivers/iio/adc/axp288_adc.c
+++ b/drivers/iio/adc/axp288_adc.c
@@ -28,8 +28,6 @@
 #include <linux/iio/driver.h>
 
 #define AXP288_ADC_EN_MASK		0xF1
-#define AXP288_ADC_TS_PIN_GPADC		0xF2
-#define AXP288_ADC_TS_PIN_ON		0xF3
 
 enum axp288_adc_id {
 	AXP288_ADC_TS,
@@ -123,16 +121,6 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
 	return IIO_VAL_INT;
 }
 
-static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
-				unsigned long address)
-{
-	/* channels other than GPADC do not need to switch TS pin */
-	if (address != AXP288_GP_ADC_H)
-		return 0;
-
-	return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
-}
-
 static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 			struct iio_chan_spec const *chan,
 			int *val, int *val2, long mask)
@@ -143,16 +131,7 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	mutex_lock(&indio_dev->mlock);
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
-					chan->address)) {
-			dev_err(&indio_dev->dev, "GPADC mode\n");
-			ret = -EINVAL;
-			break;
-		}
 		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
-		if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
-						chan->address))
-			dev_err(&indio_dev->dev, "TS pin restore\n");
 		break;
 	default:
 		ret = -EINVAL;
@@ -162,15 +141,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
-static int axp288_adc_set_state(struct regmap *regmap)
-{
-	/* ADC should be always enabled for internal FG to function */
-	if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
-		return -EIO;
-
-	return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
-}
-
 static const struct iio_info axp288_adc_iio_info = {
 	.read_raw = &axp288_adc_read_raw,
 	.driver_module = THIS_MODULE,
@@ -199,7 +169,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
 	 * Set ADC to enabled state at all time, including system suspend.
 	 * otherwise internal fuel gauge functionality may be affected.
 	 */
-	ret = axp288_adc_set_state(axp20x->regmap);
+	ret = regmap_write(info->regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to enable ADC device\n");
 		return ret;
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index c15756d7bf7f..ad1775b5f83c 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -632,7 +632,7 @@ static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
 		input_report_key(info->input, BTN_TOUCH, 1);
 		input_sync(info->input);
 
-		msleep(1);
+		usleep_range(1000, 1100);
 	};
 
 	writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c
index 72b32c1ab257..ea264fa9e567 100644
--- a/drivers/iio/adc/fsl-imx25-gcq.c
+++ b/drivers/iio/adc/fsl-imx25-gcq.c
@@ -401,6 +401,7 @@ static const struct of_device_id mx25_gcq_ids[] = {
 	{ .compatible = "fsl,imx25-gcq", },
 	{ /* Sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, mx25_gcq_ids);
 
 static struct platform_driver mx25_gcq_driver = {
 	.driver		= {
diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
new file mode 100644
index 000000000000..139639f73769
--- /dev/null
+++ b/drivers/iio/adc/hx711.c
@@ -0,0 +1,532 @@
+/*
+ * HX711: analog to digital converter for weight sensor module
+ *
+ * Copyright (c) 2016 Andreas Klinger <ak@it-klinger.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+/* gain to pulse and scale conversion */
+#define HX711_GAIN_MAX		3
+
+struct hx711_gain_to_scale {
+	int			gain;
+	int			gain_pulse;
+	int			scale;
+	int			channel;
+};
+
+/*
+ * .scale depends on AVDD which in turn is known as soon as the regulator
+ * is available
+ * therefore we set .scale in hx711_probe()
+ *
+ * channel A in documentation is channel 0 in source code
+ * channel B in documentation is channel 1 in source code
+ */
+static struct hx711_gain_to_scale hx711_gain_to_scale[HX711_GAIN_MAX] = {
+	{ 128, 1, 0, 0 },
+	{  32, 2, 0, 1 },
+	{  64, 3, 0, 0 }
+};
+
+static int hx711_get_gain_to_pulse(int gain)
+{
+	int i;
+
+	for (i = 0; i < HX711_GAIN_MAX; i++)
+		if (hx711_gain_to_scale[i].gain == gain)
+			return hx711_gain_to_scale[i].gain_pulse;
+	return 1;
+}
+
+static int hx711_get_gain_to_scale(int gain)
+{
+	int i;
+
+	for (i = 0; i < HX711_GAIN_MAX; i++)
+		if (hx711_gain_to_scale[i].gain == gain)
+			return hx711_gain_to_scale[i].scale;
+	return 0;
+}
+
+static int hx711_get_scale_to_gain(int scale)
+{
+	int i;
+
+	for (i = 0; i < HX711_GAIN_MAX; i++)
+		if (hx711_gain_to_scale[i].scale == scale)
+			return hx711_gain_to_scale[i].gain;
+	return -EINVAL;
+}
+
+struct hx711_data {
+	struct device		*dev;
+	struct gpio_desc	*gpiod_pd_sck;
+	struct gpio_desc	*gpiod_dout;
+	struct regulator	*reg_avdd;
+	int			gain_set;	/* gain set on device */
+	int			gain_chan_a;	/* gain for channel A */
+	struct mutex		lock;
+};
+
+static int hx711_cycle(struct hx711_data *hx711_data)
+{
+	int val;
+
+	/*
+	 * if preempted for more then 60us while PD_SCK is high:
+	 * hx711 is going in reset
+	 * ==> measuring is false
+	 */
+	preempt_disable();
+	gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
+	val = gpiod_get_value(hx711_data->gpiod_dout);
+	/*
+	 * here we are not waiting for 0.2 us as suggested by the datasheet,
+	 * because the oscilloscope showed in a test scenario
+	 * at least 1.15 us for PD_SCK high (T3 in datasheet)
+	 * and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
+	 */
+	gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
+	preempt_enable();
+
+	return val;
+}
+
+static int hx711_read(struct hx711_data *hx711_data)
+{
+	int i, ret;
+	int value = 0;
+	int val = gpiod_get_value(hx711_data->gpiod_dout);
+
+	/* we double check if it's really down */
+	if (val)
+		return -EIO;
+
+	for (i = 0; i < 24; i++) {
+		value <<= 1;
+		ret = hx711_cycle(hx711_data);
+		if (ret)
+			value++;
+	}
+
+	value ^= 0x800000;
+
+	for (i = 0; i < hx711_get_gain_to_pulse(hx711_data->gain_set); i++)
+		hx711_cycle(hx711_data);
+
+	return value;
+}
+
+static int hx711_wait_for_ready(struct hx711_data *hx711_data)
+{
+	int i, val;
+
+	/*
+	 * a maximum reset cycle time of 56 ms was measured.
+	 * we round it up to 100 ms
+	 */
+	for (i = 0; i < 100; i++) {
+		val = gpiod_get_value(hx711_data->gpiod_dout);
+		if (!val)
+			break;
+		/* sleep at least 1 ms */
+		msleep(1);
+	}
+	if (val)
+		return -EIO;
+
+	return 0;
+}
+
+static int hx711_reset(struct hx711_data *hx711_data)
+{
+	int ret;
+	int val = gpiod_get_value(hx711_data->gpiod_dout);
+
+	if (val) {
+		/*
+		 * an examination with the oszilloscope indicated
+		 * that the first value read after the reset is not stable
+		 * if we reset too short;
+		 * the shorter the reset cycle
+		 * the less reliable the first value after reset is;
+		 * there were no problems encountered with a value
+		 * of 10 ms or higher
+		 */
+		gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
+		msleep(10);
+		gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
+
+		ret = hx711_wait_for_ready(hx711_data);
+		if (ret)
+			return ret;
+		/*
+		 * after a reset the gain is 128 so we do a dummy read
+		 * to set the gain for the next read
+		 */
+		ret = hx711_read(hx711_data);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * after a dummy read we need to wait vor readiness
+		 * for not mixing gain pulses with the clock
+		 */
+		ret = hx711_wait_for_ready(hx711_data);
+		if (ret)
+			return ret;
+	}
+
+	return val;
+}
+
+static int hx711_set_gain_for_channel(struct hx711_data *hx711_data, int chan)
+{
+	int ret;
+
+	if (chan == 0) {
+		if (hx711_data->gain_set == 32) {
+			hx711_data->gain_set = hx711_data->gain_chan_a;
+
+			ret = hx711_read(hx711_data);
+			if (ret < 0)
+				return ret;
+
+			ret = hx711_wait_for_ready(hx711_data);
+			if (ret)
+				return ret;
+		}
+	} else {
+		if (hx711_data->gain_set != 32) {
+			hx711_data->gain_set = 32;
+
+			ret = hx711_read(hx711_data);
+			if (ret < 0)
+				return ret;
+
+			ret = hx711_wait_for_ready(hx711_data);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int hx711_read_raw(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				int *val, int *val2, long mask)
+{
+	struct hx711_data *hx711_data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&hx711_data->lock);
+
+		/*
+		 * hx711_reset() must be called from here
+		 * because it could be calling hx711_read() by itself
+		 */
+		if (hx711_reset(hx711_data)) {
+			mutex_unlock(&hx711_data->lock);
+			dev_err(hx711_data->dev, "reset failed!");
+			return -EIO;
+		}
+
+		ret = hx711_set_gain_for_channel(hx711_data, chan->channel);
+		if (ret < 0) {
+			mutex_unlock(&hx711_data->lock);
+			return ret;
+		}
+
+		*val = hx711_read(hx711_data);
+
+		mutex_unlock(&hx711_data->lock);
+
+		if (*val < 0)
+			return *val;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		mutex_lock(&hx711_data->lock);
+
+		*val2 = hx711_get_gain_to_scale(hx711_data->gain_set);
+
+		mutex_unlock(&hx711_data->lock);
+
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int hx711_write_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int val,
+				int val2,
+				long mask)
+{
+	struct hx711_data *hx711_data = iio_priv(indio_dev);
+	int ret;
+	int gain;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		/*
+		 * a scale greater than 1 mV per LSB is not possible
+		 * with the HX711, therefore val must be 0
+		 */
+		if (val != 0)
+			return -EINVAL;
+
+		mutex_lock(&hx711_data->lock);
+
+		gain = hx711_get_scale_to_gain(val2);
+		if (gain < 0) {
+			mutex_unlock(&hx711_data->lock);
+			return gain;
+		}
+
+		if (gain != hx711_data->gain_set) {
+			hx711_data->gain_set = gain;
+			if (gain != 32)
+				hx711_data->gain_chan_a = gain;
+
+			ret = hx711_read(hx711_data);
+			if (ret < 0) {
+				mutex_unlock(&hx711_data->lock);
+				return ret;
+			}
+		}
+
+		mutex_unlock(&hx711_data->lock);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hx711_write_raw_get_fmt(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan,
+		long mask)
+{
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static ssize_t hx711_scale_available_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct iio_dev_attr *iio_attr = to_iio_dev_attr(attr);
+	int channel = iio_attr->address;
+	int i, len = 0;
+
+	for (i = 0; i < HX711_GAIN_MAX; i++)
+		if (hx711_gain_to_scale[i].channel == channel)
+			len += sprintf(buf + len, "0.%09d ",
+					hx711_gain_to_scale[i].scale);
+
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(in_voltage0_scale_available, S_IRUGO,
+	hx711_scale_available_show, NULL, 0);
+
+static IIO_DEVICE_ATTR(in_voltage1_scale_available, S_IRUGO,
+	hx711_scale_available_show, NULL, 1);
+
+static struct attribute *hx711_attributes[] = {
+	&iio_dev_attr_in_voltage0_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage1_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute_group hx711_attribute_group = {
+	.attrs = hx711_attributes,
+};
+
+static const struct iio_info hx711_iio_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= hx711_read_raw,
+	.write_raw		= hx711_write_raw,
+	.write_raw_get_fmt	= hx711_write_raw_get_fmt,
+	.attrs			= &hx711_attribute_group,
+};
+
+static const struct iio_chan_spec hx711_chan_spec[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.channel = 0,
+		.indexed = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_VOLTAGE,
+		.channel = 1,
+		.indexed = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static int hx711_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct hx711_data *hx711_data;
+	struct iio_dev *indio_dev;
+	int ret;
+	int i;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct hx711_data));
+	if (!indio_dev) {
+		dev_err(dev, "failed to allocate IIO device\n");
+		return -ENOMEM;
+	}
+
+	hx711_data = iio_priv(indio_dev);
+	hx711_data->dev = dev;
+
+	mutex_init(&hx711_data->lock);
+
+	/*
+	 * PD_SCK stands for power down and serial clock input of HX711
+	 * in the driver it is an output
+	 */
+	hx711_data->gpiod_pd_sck = devm_gpiod_get(dev, "sck", GPIOD_OUT_LOW);
+	if (IS_ERR(hx711_data->gpiod_pd_sck)) {
+		dev_err(dev, "failed to get sck-gpiod: err=%ld\n",
+					PTR_ERR(hx711_data->gpiod_pd_sck));
+		return PTR_ERR(hx711_data->gpiod_pd_sck);
+	}
+
+	/*
+	 * DOUT stands for serial data output of HX711
+	 * for the driver it is an input
+	 */
+	hx711_data->gpiod_dout = devm_gpiod_get(dev, "dout", GPIOD_IN);
+	if (IS_ERR(hx711_data->gpiod_dout)) {
+		dev_err(dev, "failed to get dout-gpiod: err=%ld\n",
+					PTR_ERR(hx711_data->gpiod_dout));
+		return PTR_ERR(hx711_data->gpiod_dout);
+	}
+
+	hx711_data->reg_avdd = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(hx711_data->reg_avdd))
+		return PTR_ERR(hx711_data->reg_avdd);
+
+	ret = regulator_enable(hx711_data->reg_avdd);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * with
+	 * full scale differential input range: AVDD / GAIN
+	 * full scale output data: 2^24
+	 * we can say:
+	 *     AVDD / GAIN = 2^24
+	 * therefore:
+	 *     1 LSB = AVDD / GAIN / 2^24
+	 * AVDD is in uV, but we need 10^-9 mV
+	 * approximately to fit into a 32 bit number:
+	 * 1 LSB = (AVDD * 100) / GAIN / 1678 [10^-9 mV]
+	 */
+	ret = regulator_get_voltage(hx711_data->reg_avdd);
+	if (ret < 0) {
+		regulator_disable(hx711_data->reg_avdd);
+		return ret;
+	}
+	/* we need 10^-9 mV */
+	ret *= 100;
+
+	for (i = 0; i < HX711_GAIN_MAX; i++)
+		hx711_gain_to_scale[i].scale =
+			ret / hx711_gain_to_scale[i].gain / 1678;
+
+	hx711_data->gain_set = 128;
+	hx711_data->gain_chan_a = 128;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	indio_dev->name = "hx711";
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &hx711_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = hx711_chan_spec;
+	indio_dev->num_channels = ARRAY_SIZE(hx711_chan_spec);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(dev, "Couldn't register the device\n");
+		regulator_disable(hx711_data->reg_avdd);
+	}
+
+	return ret;
+}
+
+static int hx711_remove(struct platform_device *pdev)
+{
+	struct hx711_data *hx711_data;
+	struct iio_dev *indio_dev;
+
+	indio_dev = platform_get_drvdata(pdev);
+	hx711_data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	regulator_disable(hx711_data->reg_avdd);
+
+	return 0;
+}
+
+static const struct of_device_id of_hx711_match[] = {
+	{ .compatible = "avia,hx711", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_hx711_match);
+
+static struct platform_driver hx711_driver = {
+	.probe		= hx711_probe,
+	.remove		= hx711_remove,
+	.driver		= {
+		.name		= "hx711-gpio",
+		.of_match_table	= of_hx711_match,
+	},
+};
+
+module_platform_driver(hx711_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("HX711 bitbanging driver - ADC for weight cells");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:hx711-gpio");
+
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 59b7d76e1ad2..3263231276ca 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -22,6 +22,8 @@
 
 #include <linux/delay.h>
 #include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/sysfs.h>
 #include <linux/kthread.h>
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index c2babe50a0d8..0a19761d656c 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2016, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -84,7 +84,7 @@
 #define VADC_MAX_ADC_CODE			0xa800
 
 #define VADC_ABSOLUTE_RANGE_UV			625000
-#define VADC_RATIOMETRIC_RANGE_UV		1800000
+#define VADC_RATIOMETRIC_RANGE			1800
 
 #define VADC_DEF_PRESCALING			0 /* 1:1 */
 #define VADC_DEF_DECIMATION			0 /* 512 */
@@ -100,9 +100,23 @@
 
 #define KELVINMIL_CELSIUSMIL			273150
 
+#define PMI_CHG_SCALE_1				-138890
+#define PMI_CHG_SCALE_2				391750000000LL
+
 #define VADC_CHAN_MIN			VADC_USBIN
 #define VADC_CHAN_MAX			VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM
 
+/**
+ * struct vadc_map_pt - Map the graph representation for ADC channel
+ * @x: Represent the ADC digitized code.
+ * @y: Represent the physical data which can be temperature, voltage,
+ *     resistance.
+ */
+struct vadc_map_pt {
+	s32 x;
+	s32 y;
+};
+
 /*
  * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
  * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
@@ -148,6 +162,9 @@ struct vadc_prescale_ratio {
  *	start of conversion.
  * @avg_samples: ability to provide single result from the ADC
  *	that is an average of multiple measurements.
+ * @scale_fn: Represents the scaling function to convert voltage
+ *	physical units desired by the client for the channel.
+ *	Referenced from enum vadc_scale_fn_type.
  */
 struct vadc_channel_prop {
 	unsigned int channel;
@@ -156,6 +173,7 @@ struct vadc_channel_prop {
 	unsigned int prescale;
 	unsigned int hw_settle_time;
 	unsigned int avg_samples;
+	unsigned int scale_fn;
 };
 
 /**
@@ -186,6 +204,35 @@ struct vadc_priv {
 	struct mutex		 lock;
 };
 
+/**
+ * struct vadc_scale_fn - Scaling function prototype
+ * @scale: Function pointer to one of the scaling functions
+ *	which takes the adc properties, channel properties,
+ *	and returns the physical result.
+ */
+struct vadc_scale_fn {
+	int (*scale)(struct vadc_priv *, const struct vadc_channel_prop *,
+		     u16, int *);
+};
+
+/**
+ * enum vadc_scale_fn_type - Scaling function to convert ADC code to
+ *				physical scaled units for the channel.
+ * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV).
+ * SCALE_THERM_100K_PULLUP: Returns temperature in millidegC.
+ *				 Uses a mapping table with 100K pullup.
+ * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade.
+ * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC.
+ * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp
+ */
+enum vadc_scale_fn_type {
+	SCALE_DEFAULT = 0,
+	SCALE_THERM_100K_PULLUP,
+	SCALE_PMIC_THERM,
+	SCALE_XOTHERM,
+	SCALE_PMI_CHG_TEMP,
+};
+
 static const struct vadc_prescale_ratio vadc_prescale_ratios[] = {
 	{.num =  1, .den =  1},
 	{.num =  1, .den =  3},
@@ -197,6 +244,44 @@ static const struct vadc_prescale_ratio vadc_prescale_ratios[] = {
 	{.num =  1, .den = 10}
 };
 
+/* Voltage to temperature */
+static const struct vadc_map_pt adcmap_100k_104ef_104fb[] = {
+	{1758,	-40},
+	{1742,	-35},
+	{1719,	-30},
+	{1691,	-25},
+	{1654,	-20},
+	{1608,	-15},
+	{1551,	-10},
+	{1483,	-5},
+	{1404,	0},
+	{1315,	5},
+	{1218,	10},
+	{1114,	15},
+	{1007,	20},
+	{900,	25},
+	{795,	30},
+	{696,	35},
+	{605,	40},
+	{522,	45},
+	{448,	50},
+	{383,	55},
+	{327,	60},
+	{278,	65},
+	{237,	70},
+	{202,	75},
+	{172,	80},
+	{146,	85},
+	{125,	90},
+	{107,	95},
+	{92,	100},
+	{79,	105},
+	{68,	110},
+	{59,	115},
+	{51,	120},
+	{44,	125}
+};
+
 static int vadc_read(struct vadc_priv *vadc, u16 offset, u8 *data)
 {
 	return regmap_bulk_read(vadc->regmap, vadc->base + offset, data, 1);
@@ -418,7 +503,7 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
 	u16 read_1, read_2;
 	int ret;
 
-	vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE_UV;
+	vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE;
 	vadc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
 
 	prop = vadc_get_channel(vadc, VADC_REF_1250MV);
@@ -468,27 +553,148 @@ err:
 	return ret;
 }
 
-static s32 vadc_calibrate(struct vadc_priv *vadc,
-			  const struct vadc_channel_prop *prop, u16 adc_code)
+static int vadc_map_voltage_temp(const struct vadc_map_pt *pts,
+				 u32 tablesize, s32 input, s64 *output)
+{
+	bool descending = 1;
+	u32 i = 0;
+
+	if (!pts)
+		return -EINVAL;
+
+	/* Check if table is descending or ascending */
+	if (tablesize > 1) {
+		if (pts[0].x < pts[1].x)
+			descending = 0;
+	}
+
+	while (i < tablesize) {
+		if ((descending) && (pts[i].x < input)) {
+			/* table entry is less than measured*/
+			 /* value and table is descending, stop */
+			break;
+		} else if ((!descending) &&
+				(pts[i].x > input)) {
+			/* table entry is greater than measured*/
+			/*value and table is ascending, stop */
+			break;
+		}
+		i++;
+	}
+
+	if (i == 0) {
+		*output = pts[0].y;
+	} else if (i == tablesize) {
+		*output = pts[tablesize - 1].y;
+	} else {
+		/* result is between search_index and search_index-1 */
+		/* interpolate linearly */
+		*output = (((s32)((pts[i].y - pts[i - 1].y) *
+			(input - pts[i - 1].x)) /
+			(pts[i].x - pts[i - 1].x)) +
+			pts[i - 1].y);
+	}
+
+	return 0;
+}
+
+static void vadc_scale_calib(struct vadc_priv *vadc, u16 adc_code,
+			     const struct vadc_channel_prop *prop,
+			     s64 *scale_voltage)
+{
+	*scale_voltage = (adc_code -
+		vadc->graph[prop->calibration].gnd);
+	*scale_voltage *= vadc->graph[prop->calibration].dx;
+	*scale_voltage = div64_s64(*scale_voltage,
+		vadc->graph[prop->calibration].dy);
+	if (prop->calibration == VADC_CALIB_ABSOLUTE)
+		*scale_voltage +=
+		vadc->graph[prop->calibration].dx;
+
+	if (*scale_voltage < 0)
+		*scale_voltage = 0;
+}
+
+static int vadc_scale_volt(struct vadc_priv *vadc,
+			   const struct vadc_channel_prop *prop, u16 adc_code,
+			   int *result_uv)
 {
 	const struct vadc_prescale_ratio *prescale;
-	s64 voltage;
+	s64 voltage = 0, result = 0;
 
-	voltage = adc_code - vadc->graph[prop->calibration].gnd;
-	voltage *= vadc->graph[prop->calibration].dx;
-	voltage = div64_s64(voltage, vadc->graph[prop->calibration].dy);
+	vadc_scale_calib(vadc, adc_code, prop, &voltage);
+
+	prescale = &vadc_prescale_ratios[prop->prescale];
+	voltage = voltage * prescale->den;
+	result = div64_s64(voltage, prescale->num);
+	*result_uv = result;
+
+	return 0;
+}
+
+static int vadc_scale_therm(struct vadc_priv *vadc,
+			    const struct vadc_channel_prop *prop, u16 adc_code,
+			    int *result_mdec)
+{
+	s64 voltage = 0, result = 0;
+
+	vadc_scale_calib(vadc, adc_code, prop, &voltage);
 
 	if (prop->calibration == VADC_CALIB_ABSOLUTE)
-		voltage += vadc->graph[prop->calibration].dx;
+		voltage = div64_s64(voltage, 1000);
+
+	vadc_map_voltage_temp(adcmap_100k_104ef_104fb,
+			      ARRAY_SIZE(adcmap_100k_104ef_104fb),
+			      voltage, &result);
+	result *= 1000;
+	*result_mdec = result;
 
-	if (voltage < 0)
+	return 0;
+}
+
+static int vadc_scale_die_temp(struct vadc_priv *vadc,
+			       const struct vadc_channel_prop *prop,
+			       u16 adc_code, int *result_mdec)
+{
+	const struct vadc_prescale_ratio *prescale;
+	s64 voltage = 0;
+	u64 temp; /* Temporary variable for do_div */
+
+	vadc_scale_calib(vadc, adc_code, prop, &voltage);
+
+	if (voltage > 0) {
+		prescale = &vadc_prescale_ratios[prop->prescale];
+		temp = voltage * prescale->den;
+		do_div(temp, prescale->num * 2);
+		voltage = temp;
+	} else {
 		voltage = 0;
+	}
 
-	prescale = &vadc_prescale_ratios[prop->prescale];
+	voltage -= KELVINMIL_CELSIUSMIL;
+	*result_mdec = voltage;
+
+	return 0;
+}
+
+static int vadc_scale_chg_temp(struct vadc_priv *vadc,
+			       const struct vadc_channel_prop *prop,
+			       u16 adc_code, int *result_mdec)
+{
+	const struct vadc_prescale_ratio *prescale;
+	s64 voltage = 0, result = 0;
 
+	vadc_scale_calib(vadc, adc_code, prop, &voltage);
+
+	prescale = &vadc_prescale_ratios[prop->prescale];
 	voltage = voltage * prescale->den;
+	voltage = div64_s64(voltage, prescale->num);
+	voltage = ((PMI_CHG_SCALE_1) * (voltage * 2));
+	voltage = (voltage + PMI_CHG_SCALE_2);
+	result =  div64_s64(voltage, 1000000);
+	*result_mdec = result;
 
-	return div64_s64(voltage, prescale->num);
+	return 0;
 }
 
 static int vadc_decimation_from_dt(u32 value)
@@ -536,6 +742,14 @@ static int vadc_avg_samples_from_dt(u32 value)
 	return __ffs64(value);
 }
 
+static struct vadc_scale_fn scale_fn[] = {
+	[SCALE_DEFAULT] = {vadc_scale_volt},
+	[SCALE_THERM_100K_PULLUP] = {vadc_scale_therm},
+	[SCALE_PMIC_THERM] = {vadc_scale_die_temp},
+	[SCALE_XOTHERM] = {vadc_scale_therm},
+	[SCALE_PMI_CHG_TEMP] = {vadc_scale_chg_temp},
+};
+
 static int vadc_read_raw(struct iio_dev *indio_dev,
 			 struct iio_chan_spec const *chan, int *val, int *val2,
 			 long mask)
@@ -552,11 +766,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			break;
 
-		*val = vadc_calibrate(vadc, prop, adc_code);
+		scale_fn[prop->scale_fn].scale(vadc, prop, adc_code, val);
 
-		/* 2mV/K, return milli Celsius */
-		*val /= 2;
-		*val -= KELVINMIL_CELSIUSMIL;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_RAW:
 		prop = &vadc->chan_props[chan->address];
@@ -564,12 +775,8 @@ static int vadc_read_raw(struct iio_dev *indio_dev,
 		if (ret)
 			break;
 
-		*val = vadc_calibrate(vadc, prop, adc_code);
+		*val = (int)adc_code;
 		return IIO_VAL_INT;
-	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		*val2 = 1000;
-		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		ret = -EINVAL;
 		break;
@@ -602,22 +809,39 @@ struct vadc_channels {
 	unsigned int prescale_index;
 	enum iio_chan_type type;
 	long info_mask;
+	unsigned int scale_fn;
 };
 
-#define VADC_CHAN(_dname, _type, _mask, _pre)				\
+#define VADC_CHAN(_dname, _type, _mask, _pre, _scale)			\
 	[VADC_##_dname] = {						\
 		.datasheet_name = __stringify(_dname),			\
 		.prescale_index = _pre,					\
 		.type = _type,						\
-		.info_mask = _mask					\
+		.info_mask = _mask,					\
+		.scale_fn = _scale					\
 	},								\
 
-#define VADC_CHAN_TEMP(_dname, _pre)					\
-	VADC_CHAN(_dname, IIO_TEMP, BIT(IIO_CHAN_INFO_PROCESSED), _pre)	\
+#define VADC_NO_CHAN(_dname, _type, _mask, _pre)			\
+	[VADC_##_dname] = {						\
+		.datasheet_name = __stringify(_dname),			\
+		.prescale_index = _pre,					\
+		.type = _type,						\
+		.info_mask = _mask					\
+	},
 
-#define VADC_CHAN_VOLT(_dname, _pre)					\
+#define VADC_CHAN_TEMP(_dname, _pre, _scale)				\
+	VADC_CHAN(_dname, IIO_TEMP,					\
+		BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PROCESSED),	\
+		_pre, _scale)						\
+
+#define VADC_CHAN_VOLT(_dname, _pre, _scale)				\
 	VADC_CHAN(_dname, IIO_VOLTAGE,					\
-		  BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),	\
+		  BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_PROCESSED),\
+		  _pre, _scale)						\
+
+#define VADC_CHAN_NO_SCALE(_dname, _pre)				\
+	VADC_NO_CHAN(_dname, IIO_VOLTAGE,				\
+		  BIT(IIO_CHAN_INFO_RAW),				\
 		  _pre)							\
 
 /*
@@ -626,106 +850,106 @@ struct vadc_channels {
  * gaps in the array should be treated as reserved channels.
  */
 static const struct vadc_channels vadc_chans[] = {
-	VADC_CHAN_VOLT(USBIN, 4)
-	VADC_CHAN_VOLT(DCIN, 4)
-	VADC_CHAN_VOLT(VCHG_SNS, 3)
-	VADC_CHAN_VOLT(SPARE1_03, 1)
-	VADC_CHAN_VOLT(USB_ID_MV, 1)
-	VADC_CHAN_VOLT(VCOIN, 1)
-	VADC_CHAN_VOLT(VBAT_SNS, 1)
-	VADC_CHAN_VOLT(VSYS, 1)
-	VADC_CHAN_TEMP(DIE_TEMP, 0)
-	VADC_CHAN_VOLT(REF_625MV, 0)
-	VADC_CHAN_VOLT(REF_1250MV, 0)
-	VADC_CHAN_VOLT(CHG_TEMP, 0)
-	VADC_CHAN_VOLT(SPARE1, 0)
-	VADC_CHAN_VOLT(SPARE2, 0)
-	VADC_CHAN_VOLT(GND_REF, 0)
-	VADC_CHAN_VOLT(VDD_VADC, 0)
-
-	VADC_CHAN_VOLT(P_MUX1_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX2_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX3_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX4_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX5_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX6_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX7_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX8_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX9_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX10_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX11_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX12_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX13_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX14_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX15_1_1, 0)
-	VADC_CHAN_VOLT(P_MUX16_1_1, 0)
-
-	VADC_CHAN_VOLT(P_MUX1_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX2_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX3_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX4_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX5_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX6_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX7_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX8_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX9_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX10_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX11_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX12_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX13_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX14_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX15_1_3, 1)
-	VADC_CHAN_VOLT(P_MUX16_1_3, 1)
-
-	VADC_CHAN_VOLT(LR_MUX1_BAT_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX3_XO_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX4_AMUX_THM1, 0)
-	VADC_CHAN_VOLT(LR_MUX5_AMUX_THM2, 0)
-	VADC_CHAN_VOLT(LR_MUX6_AMUX_THM3, 0)
-	VADC_CHAN_VOLT(LR_MUX7_HW_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX8_AMUX_THM4, 0)
-	VADC_CHAN_VOLT(LR_MUX9_AMUX_THM5, 0)
-	VADC_CHAN_VOLT(LR_MUX10_USB_ID, 0)
-	VADC_CHAN_VOLT(AMUX_PU1, 0)
-	VADC_CHAN_VOLT(AMUX_PU2, 0)
-	VADC_CHAN_VOLT(LR_MUX3_BUF_XO_THERM, 0)
-
-	VADC_CHAN_VOLT(LR_MUX1_PU1_BAT_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX2_PU1_BAT_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX3_PU1_XO_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX4_PU1_AMUX_THM1, 0)
-	VADC_CHAN_VOLT(LR_MUX5_PU1_AMUX_THM2, 0)
-	VADC_CHAN_VOLT(LR_MUX6_PU1_AMUX_THM3, 0)
-	VADC_CHAN_VOLT(LR_MUX7_PU1_AMUX_HW_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX8_PU1_AMUX_THM4, 0)
-	VADC_CHAN_VOLT(LR_MUX9_PU1_AMUX_THM5, 0)
-	VADC_CHAN_VOLT(LR_MUX10_PU1_AMUX_USB_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX3_BUF_PU1_XO_THERM, 0)
-
-	VADC_CHAN_VOLT(LR_MUX1_PU2_BAT_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX2_PU2_BAT_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX3_PU2_XO_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX4_PU2_AMUX_THM1, 0)
-	VADC_CHAN_VOLT(LR_MUX5_PU2_AMUX_THM2, 0)
-	VADC_CHAN_VOLT(LR_MUX6_PU2_AMUX_THM3, 0)
-	VADC_CHAN_VOLT(LR_MUX7_PU2_AMUX_HW_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX8_PU2_AMUX_THM4, 0)
-	VADC_CHAN_VOLT(LR_MUX9_PU2_AMUX_THM5, 0)
-	VADC_CHAN_VOLT(LR_MUX10_PU2_AMUX_USB_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX3_BUF_PU2_XO_THERM, 0)
-
-	VADC_CHAN_VOLT(LR_MUX1_PU1_PU2_BAT_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX2_PU1_PU2_BAT_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX3_PU1_PU2_XO_THERM, 0)
-	VADC_CHAN_VOLT(LR_MUX4_PU1_PU2_AMUX_THM1, 0)
-	VADC_CHAN_VOLT(LR_MUX5_PU1_PU2_AMUX_THM2, 0)
-	VADC_CHAN_VOLT(LR_MUX6_PU1_PU2_AMUX_THM3, 0)
-	VADC_CHAN_VOLT(LR_MUX7_PU1_PU2_AMUX_HW_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX8_PU1_PU2_AMUX_THM4, 0)
-	VADC_CHAN_VOLT(LR_MUX9_PU1_PU2_AMUX_THM5, 0)
-	VADC_CHAN_VOLT(LR_MUX10_PU1_PU2_AMUX_USB_ID, 0)
-	VADC_CHAN_VOLT(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0)
+	VADC_CHAN_VOLT(USBIN, 4, SCALE_DEFAULT)
+	VADC_CHAN_VOLT(DCIN, 4, SCALE_DEFAULT)
+	VADC_CHAN_NO_SCALE(VCHG_SNS, 3)
+	VADC_CHAN_NO_SCALE(SPARE1_03, 1)
+	VADC_CHAN_NO_SCALE(USB_ID_MV, 1)
+	VADC_CHAN_VOLT(VCOIN, 1, SCALE_DEFAULT)
+	VADC_CHAN_NO_SCALE(VBAT_SNS, 1)
+	VADC_CHAN_VOLT(VSYS, 1, SCALE_DEFAULT)
+	VADC_CHAN_TEMP(DIE_TEMP, 0, SCALE_PMIC_THERM)
+	VADC_CHAN_VOLT(REF_625MV, 0, SCALE_DEFAULT)
+	VADC_CHAN_VOLT(REF_1250MV, 0, SCALE_DEFAULT)
+	VADC_CHAN_NO_SCALE(CHG_TEMP, 0)
+	VADC_CHAN_NO_SCALE(SPARE1, 0)
+	VADC_CHAN_TEMP(SPARE2, 0, SCALE_PMI_CHG_TEMP)
+	VADC_CHAN_VOLT(GND_REF, 0, SCALE_DEFAULT)
+	VADC_CHAN_VOLT(VDD_VADC, 0, SCALE_DEFAULT)
+
+	VADC_CHAN_NO_SCALE(P_MUX1_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX2_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX3_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX4_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX5_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX6_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX7_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX8_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX9_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX10_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX11_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX12_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX13_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX14_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX15_1_1, 0)
+	VADC_CHAN_NO_SCALE(P_MUX16_1_1, 0)
+
+	VADC_CHAN_NO_SCALE(P_MUX1_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX2_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX3_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX4_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX5_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX6_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX7_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX8_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX9_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX10_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX11_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX12_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX13_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX14_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX15_1_3, 1)
+	VADC_CHAN_NO_SCALE(P_MUX16_1_3, 1)
+
+	VADC_CHAN_NO_SCALE(LR_MUX1_BAT_THERM, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX2_BAT_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX3_XO_THERM, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX4_AMUX_THM1, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX5_AMUX_THM2, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX6_AMUX_THM3, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX7_HW_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX8_AMUX_THM4, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX9_AMUX_THM5, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX10_USB_ID, 0)
+	VADC_CHAN_NO_SCALE(AMUX_PU1, 0)
+	VADC_CHAN_NO_SCALE(AMUX_PU2, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX3_BUF_XO_THERM, 0)
+
+	VADC_CHAN_NO_SCALE(LR_MUX1_PU1_BAT_THERM, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX2_PU1_BAT_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX3_PU1_XO_THERM, 0)
+	VADC_CHAN_TEMP(LR_MUX4_PU1_AMUX_THM1, 0, SCALE_THERM_100K_PULLUP)
+	VADC_CHAN_TEMP(LR_MUX5_PU1_AMUX_THM2, 0, SCALE_THERM_100K_PULLUP)
+	VADC_CHAN_TEMP(LR_MUX6_PU1_AMUX_THM3, 0, SCALE_THERM_100K_PULLUP)
+	VADC_CHAN_NO_SCALE(LR_MUX7_PU1_AMUX_HW_ID, 0)
+	VADC_CHAN_TEMP(LR_MUX8_PU1_AMUX_THM4, 0, SCALE_THERM_100K_PULLUP)
+	VADC_CHAN_TEMP(LR_MUX9_PU1_AMUX_THM5, 0, SCALE_THERM_100K_PULLUP)
+	VADC_CHAN_NO_SCALE(LR_MUX10_PU1_AMUX_USB_ID, 0)
+	VADC_CHAN_TEMP(LR_MUX3_BUF_PU1_XO_THERM, 0, SCALE_XOTHERM)
+
+	VADC_CHAN_NO_SCALE(LR_MUX1_PU2_BAT_THERM, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX2_PU2_BAT_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX3_PU2_XO_THERM, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX4_PU2_AMUX_THM1, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX5_PU2_AMUX_THM2, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX6_PU2_AMUX_THM3, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX7_PU2_AMUX_HW_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX8_PU2_AMUX_THM4, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX9_PU2_AMUX_THM5, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX10_PU2_AMUX_USB_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX3_BUF_PU2_XO_THERM, 0)
+
+	VADC_CHAN_NO_SCALE(LR_MUX1_PU1_PU2_BAT_THERM, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX2_PU1_PU2_BAT_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX3_PU1_PU2_XO_THERM, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX4_PU1_PU2_AMUX_THM1, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX5_PU1_PU2_AMUX_THM2, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX6_PU1_PU2_AMUX_THM3, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX7_PU1_PU2_AMUX_HW_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX8_PU1_PU2_AMUX_THM4, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX9_PU1_PU2_AMUX_THM5, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX10_PU1_PU2_AMUX_USB_ID, 0)
+	VADC_CHAN_NO_SCALE(LR_MUX3_BUF_PU1_PU2_XO_THERM, 0)
 };
 
 static int vadc_get_dt_channel_data(struct device *dev,
@@ -844,6 +1068,7 @@ static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
 			return ret;
 		}
 
+		prop.scale_fn = vadc_chans[prop.channel].scale_fn;
 		vadc->chan_props[index] = prop;
 
 		vadc_chan = &vadc_chans[prop.channel];
diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
new file mode 100644
index 000000000000..0330361b8ed5
--- /dev/null
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -0,0 +1,490 @@
+/*
+ * Texas Instruments ADS7950 SPI ADC driver
+ *
+ * Copyright 2016 David Lechner <david@lechnology.com>
+ *
+ * Based on iio/ad7923.c:
+ * Copyright 2011 Analog Devices Inc
+ * Copyright 2012 CS Systemes d'Information
+ *
+ * And also on hwmon/ads79xx.c
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define TI_ADS7950_CR_MANUAL	BIT(12)
+#define TI_ADS7950_CR_WRITE	BIT(11)
+#define TI_ADS7950_CR_CHAN(ch)	((ch) << 7)
+#define TI_ADS7950_CR_RANGE_5V	BIT(6)
+
+#define TI_ADS7950_MAX_CHAN	16
+
+#define TI_ADS7950_TIMESTAMP_SIZE (sizeof(int64_t) / sizeof(__be16))
+
+/* val = value, dec = left shift, bits = number of bits of the mask */
+#define TI_ADS7950_EXTRACT(val, dec, bits) \
+	(((val) >> (dec)) & ((1 << (bits)) - 1))
+
+struct ti_ads7950_state {
+	struct spi_device	*spi;
+	struct spi_transfer	ring_xfer[TI_ADS7950_MAX_CHAN + 2];
+	struct spi_transfer	scan_single_xfer[3];
+	struct spi_message	ring_msg;
+	struct spi_message	scan_single_msg;
+
+	struct regulator	*reg;
+
+	unsigned int		settings;
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	__be16	rx_buf[TI_ADS7950_MAX_CHAN + TI_ADS7950_TIMESTAMP_SIZE]
+							____cacheline_aligned;
+	__be16	tx_buf[TI_ADS7950_MAX_CHAN];
+};
+
+struct ti_ads7950_chip_info {
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+};
+
+enum ti_ads7950_id {
+	TI_ADS7950,
+	TI_ADS7951,
+	TI_ADS7952,
+	TI_ADS7953,
+	TI_ADS7954,
+	TI_ADS7955,
+	TI_ADS7956,
+	TI_ADS7957,
+	TI_ADS7958,
+	TI_ADS7959,
+	TI_ADS7960,
+	TI_ADS7961,
+};
+
+#define TI_ADS7950_V_CHAN(index, bits)				\
+{								\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = index,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.address = index,					\
+	.datasheet_name = "CH##index",				\
+	.scan_index = index,					\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = bits,				\
+		.storagebits = 16,				\
+		.shift = 12 - (bits),				\
+		.endianness = IIO_BE,				\
+	},							\
+}
+
+#define DECLARE_TI_ADS7950_4_CHANNELS(name, bits) \
+const struct iio_chan_spec name ## _channels[] = { \
+	TI_ADS7950_V_CHAN(0, bits), \
+	TI_ADS7950_V_CHAN(1, bits), \
+	TI_ADS7950_V_CHAN(2, bits), \
+	TI_ADS7950_V_CHAN(3, bits), \
+	IIO_CHAN_SOFT_TIMESTAMP(4), \
+}
+
+#define DECLARE_TI_ADS7950_8_CHANNELS(name, bits) \
+const struct iio_chan_spec name ## _channels[] = { \
+	TI_ADS7950_V_CHAN(0, bits), \
+	TI_ADS7950_V_CHAN(1, bits), \
+	TI_ADS7950_V_CHAN(2, bits), \
+	TI_ADS7950_V_CHAN(3, bits), \
+	TI_ADS7950_V_CHAN(4, bits), \
+	TI_ADS7950_V_CHAN(5, bits), \
+	TI_ADS7950_V_CHAN(6, bits), \
+	TI_ADS7950_V_CHAN(7, bits), \
+	IIO_CHAN_SOFT_TIMESTAMP(8), \
+}
+
+#define DECLARE_TI_ADS7950_12_CHANNELS(name, bits) \
+const struct iio_chan_spec name ## _channels[] = { \
+	TI_ADS7950_V_CHAN(0, bits), \
+	TI_ADS7950_V_CHAN(1, bits), \
+	TI_ADS7950_V_CHAN(2, bits), \
+	TI_ADS7950_V_CHAN(3, bits), \
+	TI_ADS7950_V_CHAN(4, bits), \
+	TI_ADS7950_V_CHAN(5, bits), \
+	TI_ADS7950_V_CHAN(6, bits), \
+	TI_ADS7950_V_CHAN(7, bits), \
+	TI_ADS7950_V_CHAN(8, bits), \
+	TI_ADS7950_V_CHAN(9, bits), \
+	TI_ADS7950_V_CHAN(10, bits), \
+	TI_ADS7950_V_CHAN(11, bits), \
+	IIO_CHAN_SOFT_TIMESTAMP(12), \
+}
+
+#define DECLARE_TI_ADS7950_16_CHANNELS(name, bits) \
+const struct iio_chan_spec name ## _channels[] = { \
+	TI_ADS7950_V_CHAN(0, bits), \
+	TI_ADS7950_V_CHAN(1, bits), \
+	TI_ADS7950_V_CHAN(2, bits), \
+	TI_ADS7950_V_CHAN(3, bits), \
+	TI_ADS7950_V_CHAN(4, bits), \
+	TI_ADS7950_V_CHAN(5, bits), \
+	TI_ADS7950_V_CHAN(6, bits), \
+	TI_ADS7950_V_CHAN(7, bits), \
+	TI_ADS7950_V_CHAN(8, bits), \
+	TI_ADS7950_V_CHAN(9, bits), \
+	TI_ADS7950_V_CHAN(10, bits), \
+	TI_ADS7950_V_CHAN(11, bits), \
+	TI_ADS7950_V_CHAN(12, bits), \
+	TI_ADS7950_V_CHAN(13, bits), \
+	TI_ADS7950_V_CHAN(14, bits), \
+	TI_ADS7950_V_CHAN(15, bits), \
+	IIO_CHAN_SOFT_TIMESTAMP(16), \
+}
+
+static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7950, 12);
+static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7951, 12);
+static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7952, 12);
+static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7953, 12);
+static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7954, 10);
+static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7955, 10);
+static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7956, 10);
+static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7957, 10);
+static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7958, 8);
+static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7959, 8);
+static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7960, 8);
+static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7961, 8);
+
+static const struct ti_ads7950_chip_info ti_ads7950_chip_info[] = {
+	[TI_ADS7950] = {
+		.channels	= ti_ads7950_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7950_channels),
+	},
+	[TI_ADS7951] = {
+		.channels	= ti_ads7951_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7951_channels),
+	},
+	[TI_ADS7952] = {
+		.channels	= ti_ads7952_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7952_channels),
+	},
+	[TI_ADS7953] = {
+		.channels	= ti_ads7953_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7953_channels),
+	},
+	[TI_ADS7954] = {
+		.channels	= ti_ads7954_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7954_channels),
+	},
+	[TI_ADS7955] = {
+		.channels	= ti_ads7955_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7955_channels),
+	},
+	[TI_ADS7956] = {
+		.channels	= ti_ads7956_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7956_channels),
+	},
+	[TI_ADS7957] = {
+		.channels	= ti_ads7957_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7957_channels),
+	},
+	[TI_ADS7958] = {
+		.channels	= ti_ads7958_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7958_channels),
+	},
+	[TI_ADS7959] = {
+		.channels	= ti_ads7959_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7959_channels),
+	},
+	[TI_ADS7960] = {
+		.channels	= ti_ads7960_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7960_channels),
+	},
+	[TI_ADS7961] = {
+		.channels	= ti_ads7961_channels,
+		.num_channels	= ARRAY_SIZE(ti_ads7961_channels),
+	},
+};
+
+/*
+ * ti_ads7950_update_scan_mode() setup the spi transfer buffer for the new
+ * scan mask
+ */
+static int ti_ads7950_update_scan_mode(struct iio_dev *indio_dev,
+				       const unsigned long *active_scan_mask)
+{
+	struct ti_ads7950_state *st = iio_priv(indio_dev);
+	int i, cmd, len;
+
+	len = 0;
+	for_each_set_bit(i, active_scan_mask, indio_dev->num_channels) {
+		cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(i) | st->settings;
+		st->tx_buf[len++] = cpu_to_be16(cmd);
+	}
+
+	/* Data for the 1st channel is not returned until the 3rd transfer */
+	len += 2;
+	for (i = 0; i < len; i++) {
+		if ((i + 2) < len)
+			st->ring_xfer[i].tx_buf = &st->tx_buf[i];
+		if (i >= 2)
+			st->ring_xfer[i].rx_buf = &st->rx_buf[i - 2];
+		st->ring_xfer[i].len = 2;
+		st->ring_xfer[i].cs_change = 1;
+	}
+	/* make sure last transfer's cs_change is not set */
+	st->ring_xfer[len - 1].cs_change = 0;
+
+	spi_message_init_with_transfers(&st->ring_msg, st->ring_xfer, len);
+
+	return 0;
+}
+
+static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ti_ads7950_state *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = spi_sync(st->spi, &st->ring_msg);
+	if (ret < 0)
+		goto out;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+					   iio_get_time_ns(indio_dev));
+
+out:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int ti_ads7950_scan_direct(struct ti_ads7950_state *st, unsigned int ch)
+{
+	int ret, cmd;
+
+	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
+	st->tx_buf[0] = cpu_to_be16(cmd);
+
+	ret = spi_sync(st->spi, &st->scan_single_msg);
+	if (ret)
+		return ret;
+
+	return be16_to_cpu(st->rx_buf[0]);
+}
+
+static int ti_ads7950_get_range(struct ti_ads7950_state *st)
+{
+	int vref;
+
+	vref = regulator_get_voltage(st->reg);
+	if (vref < 0)
+		return vref;
+
+	vref /= 1000;
+
+	if (st->settings & TI_ADS7950_CR_RANGE_5V)
+		vref *= 2;
+
+	return vref;
+}
+
+static int ti_ads7950_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long m)
+{
+	struct ti_ads7950_state *st = iio_priv(indio_dev);
+	int ret;
+
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		ret = ti_ads7950_scan_direct(st, chan->address);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		if (chan->address != TI_ADS7950_EXTRACT(ret, 12, 4))
+			return -EIO;
+
+		*val = TI_ADS7950_EXTRACT(ret, chan->scan_type.shift,
+					  chan->scan_type.realbits);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		ret = ti_ads7950_get_range(st);
+		if (ret < 0)
+			return ret;
+
+		*val = ret;
+		*val2 = (1 << chan->scan_type.realbits) - 1;
+
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info ti_ads7950_info = {
+	.read_raw		= &ti_ads7950_read_raw,
+	.update_scan_mode	= ti_ads7950_update_scan_mode,
+	.driver_module		= THIS_MODULE,
+};
+
+static int ti_ads7950_probe(struct spi_device *spi)
+{
+	struct ti_ads7950_state *st;
+	struct iio_dev *indio_dev;
+	const struct ti_ads7950_chip_info *info;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	spi_set_drvdata(spi, indio_dev);
+
+	st->spi = spi;
+	st->settings = TI_ADS7950_CR_MANUAL | TI_ADS7950_CR_RANGE_5V;
+
+	info = &ti_ads7950_chip_info[spi_get_device_id(spi)->driver_data];
+
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = info->channels;
+	indio_dev->num_channels = info->num_channels;
+	indio_dev->info = &ti_ads7950_info;
+
+	/*
+	 * Setup default message. The sample is read at the end of the first
+	 * transfer, then it takes one full cycle to convert the sample and one
+	 * more cycle to send the value. The conversion process is driven by
+	 * the SPI clock, which is why we have 3 transfers. The middle one is
+	 * just dummy data sent while the chip is converting the sample that
+	 * was read at the end of the first transfer.
+	 */
+
+	st->scan_single_xfer[0].tx_buf = &st->tx_buf[0];
+	st->scan_single_xfer[0].len = 2;
+	st->scan_single_xfer[0].cs_change = 1;
+	st->scan_single_xfer[1].tx_buf = &st->tx_buf[0];
+	st->scan_single_xfer[1].len = 2;
+	st->scan_single_xfer[1].cs_change = 1;
+	st->scan_single_xfer[2].rx_buf = &st->rx_buf[0];
+	st->scan_single_xfer[2].len = 2;
+
+	spi_message_init_with_transfers(&st->scan_single_msg,
+					st->scan_single_xfer, 3);
+
+	st->reg = devm_regulator_get(&spi->dev, "refin");
+	if (IS_ERR(st->reg)) {
+		dev_err(&spi->dev, "Failed get get regulator \"refin\"\n");
+		return PTR_ERR(st->reg);
+	}
+
+	ret = regulator_enable(st->reg);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to enable regulator \"refin\"\n");
+		return ret;
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 &ti_ads7950_trigger_handler, NULL);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to setup triggered buffer\n");
+		goto error_disable_reg;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&spi->dev, "Failed to register iio device\n");
+		goto error_cleanup_ring;
+	}
+
+	return 0;
+
+error_cleanup_ring:
+	iio_triggered_buffer_cleanup(indio_dev);
+error_disable_reg:
+	regulator_disable(st->reg);
+
+	return ret;
+}
+
+static int ti_ads7950_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ti_ads7950_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	regulator_disable(st->reg);
+
+	return 0;
+}
+
+static const struct spi_device_id ti_ads7950_id[] = {
+	{"ti-ads7950", TI_ADS7950},
+	{"ti-ads7951", TI_ADS7951},
+	{"ti-ads7952", TI_ADS7952},
+	{"ti-ads7953", TI_ADS7953},
+	{"ti-ads7954", TI_ADS7954},
+	{"ti-ads7955", TI_ADS7955},
+	{"ti-ads7956", TI_ADS7956},
+	{"ti-ads7957", TI_ADS7957},
+	{"ti-ads7958", TI_ADS7958},
+	{"ti-ads7959", TI_ADS7959},
+	{"ti-ads7960", TI_ADS7960},
+	{"ti-ads7961", TI_ADS7961},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ti_ads7950_id);
+
+static struct spi_driver ti_ads7950_driver = {
+	.driver = {
+		.name	= "ti-ads7950",
+	},
+	.probe		= ti_ads7950_probe,
+	.remove		= ti_ads7950_remove,
+	.id_table	= ti_ads7950_id,
+};
+module_spi_driver(ti_ads7950_driver);
+
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("TI TI_ADS7950 ADC");
+MODULE_LICENSE("GPL v2");