diff options
| author | Alexandru Tachici <alexandru.tachici@analog.com> | 2021-09-06 09:56:29 +0300 |
|---|---|---|
| committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2021-09-14 12:02:12 +0100 |
| commit | e081102f3077aa716974ccebec97003c890d5641 (patch) | |
| tree | c958ceb960a007ade042fa8fb12f0e41d3c89c64 /drivers/iio/adc | |
| parent | 89a86da5cb8e0ee153111fb68a719d31582c206b (diff) | |
iio: adc: ad7780: Fix IRQ flag
Correct IRQ flag here is falling.
In Sigma-Delta devices the SDO line is also used as an interrupt.
Leaving IRQ on level instead of falling might trigger a sample read
when the IRQ is enabled, as the SDO line is already low. Not sure
if SDO line will always immediately go high in ad_sd_buffer_postenable
before the IRQ is enabled.
Also the datasheet seem to explicitly say the falling edge of the SDO
should be used as an interrupt:
>From the AD7780 datasheet: " The DOUT/Figure 22 RDY falling edge
can be used as an interrupt to a processor"
Fixes: da4d3d6bb9f6 ("iio: adc: ad-sigma-delta: Allow custom IRQ flags")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210906065630.16325-3-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/adc')
| -rw-r--r-- | drivers/iio/adc/ad7780.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/iio/adc/ad7780.c b/drivers/iio/adc/ad7780.c index 42bb952f4738..b6e8c8abf6f4 100644 --- a/drivers/iio/adc/ad7780.c +++ b/drivers/iio/adc/ad7780.c @@ -203,7 +203,7 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = { .set_mode = ad7780_set_mode, .postprocess_sample = ad7780_postprocess_sample, .has_registers = false, - .irq_flags = IRQF_TRIGGER_LOW, + .irq_flags = IRQF_TRIGGER_FALLING, }; #define _AD7780_CHANNEL(_bits, _wordsize, _mask_all) \ |