summaryrefslogtreecommitdiff
path: root/drivers/iio/common
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-01-10 10:44:00 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2020-01-10 10:44:00 +0100
commit821f7ce79fd1ef2bf96a1b93521d8800abd24a1f (patch)
treed17f9fd1ade5c3e0a70a1ab8ae04964b1290dcf5 /drivers/iio/common
parent0469fc6a1a8715b5c09117a26700da0d67061fb5 (diff)
parentc1d1c4a62db5c4745b9e15cfee0daf0f774f73fc (diff)
Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.6 cycle New device support * ad7091r5 ADC - New driver with follow up patch adding scale and vref support. - DT bindings * ad7923 - Support for ad7908, ad7918 and ad7928 added to driver. * bma180 - Support the BMA254 accelerometer. Required fairly substantial rework to allow for small differences between this an existing parts. * bma400 accelerometer - New driver with follow up patch for regulator support. - DT bindings. * asc dlhl60d - New driver support this range of pressure and temperature sensors. - DT bindings. * ltc2496 ADC - New driver to support this ADC. - Split the existing LTC2497 driver generic component out and reuse. - DT bindings. * parallax ping - New driver supporting ultrasonic and laser tof distance sensors. - Bindings for these sensors. New features * core - New char type for read_raw returns, used for thermocouple types. - Rename read_first_n callback to read. The reasons behind the original naming are lost to the mists of time. * ad799x - Allow pm_ops to disable device completely allowing regulator power down. * bma180 - Enable basic regulator support. * dmaengine buffer - Report platform data alignment requirements via new ABI. * max31856 - Add option to set mains filter rejection frequency and document new in_temp_filter_notch_center_frequency ABI. - Add support for configuring HW averaging (oversampling ratio) - Add runtime configuration of thermocouple type and document new ABI. * maxim-thermocouple - Add read only access to thermocouple type using new ABI, includes adding more specific compatibles to reflect which variant of the chip is being used. * mpu6050 - Provide option to support the PMU9150 in package magnetometer directly rather than via auxiliary bus. * stm32_adc - Add overrun interrupt checks to detect if this happens. * st_lsm6dsx - Enable the sensor-hub support for lsm6dsm. Includes various reworks to allow this. Cleanups and minor fixes * Subsystem wide - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5. - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them. * ad7266 - Convert to GPIO descriptors. * ad7303 - Avoid a dance with checking if the regulator is supplied by just using the optional request interface. * ad7887 - Simplify channel specification assignment to enable adding more devices. * ad7923 - Drop some unused and largely pointless defines of BOB_N==N variety. - Tidy up checkpatch warnings. - Add missing of_device_id table. * adf4350 - Convert to GPIO descriptors. * ak8975 - Convert to GPIO descriptors. * ADIS library and drivers - Expand scope of txrx_lock to cover all state and rename as state_lock - Add unlocked read / write to allow grouping of consecutive calls under single lock / unlock. - Add unlocked check_status, reset to allow grouping under single lock / unlock. - Remove remaining uses of core mlock for local state protection. mlock should never be used directly as it protects tightly defined core IIO device management state. * adis16240 - Enforce only supported SPI mode on driver load + add DT binding doc. * atlas-ph-sensor - Rename to atlas-sensor given it now covers things beyond ph sensors. * bma180 - Use local dev variable to tidy up code. - Use c99 style explicity .member assignment to make driver more readable. * bmp280 - Drop ACPI support. No evidence this was used and appropriate ID is not registered. - Allow ACPI to bind device via PRP0001 * dmaengine buffer - Use dma_request_chan instead of dma_request_slave_channel_reason as that ABI is going away. - Add module info to avoid tainting the kernel. * hts221 - Avoid magic number defines when only used to fill structure elements that are self describing. * lm3533 - Drop a stray semicolon. * max9611 - Cleanup enum handling to be more resilient to future changes. * mpu6050 - Delete MPU9150 from supported SPI devices as doesn't provide SPI. - Select I2C_MUX again after kbuild issue fixed elsewhere. * stm32-timer - Drop an unnecessary register update. * ssp_sensors - Convert to GPIO descriptors. * st_sensors - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used anyway. - Make default platform data structures __maybe_unsued. - Fill in some missing kernel-doc function parameters. * st_lsm6dsx - white space fixes. - Mark some constants that aren't always used as __maybe_unused. - Drop of ID table guards as they just pervent use under ACPI. - Switch to device properties to allow ACPI usage. * st_uvis25 - Drop acpi.h include as no ACPI APIs used. * ti-ads1015 - Drop legacy platform data as no one seems to be using it. - Use the device property API instead of OF specific. * ti-ads7950 - typo fix in error message. * tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits) iio: accel: bma180: BMA254 support iio: pressure: bmp280: Allow device to be enumerated from ACPI iio: pressure: bmp280: Drop ACPI support dt-bindings: iio: adc: convert sd modulator to json-schema iio: buffer: rename 'read_first_n' callback to 'read' iio: buffer-dmaengine: Report buffer length requirements bindings: iio: pressure: Add documentation for dlh driver dt-bindings: Add asc vendor iio: pressure: Add driver for DLH pressure sensors iio: buffer-dmaengine: Add module information iio: accel: bma180: Use explicit member assignment iio: accel: bma180: Basic regulator support iio: accel: bma180: Add dev helper variable iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page iio: imu: st_lsm6dsx: check if pull_up is located in primary page iio: imu: st_lsm6dsx: check if master_enable is located in primary page iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings iio: light: remove unneeded semicolon ...
Diffstat (limited to 'drivers/iio/common')
-rw-r--r--drivers/iio/common/ssp_sensors/ssp.h14
-rw-r--r--drivers/iio/common/ssp_sensors/ssp_dev.c29
-rw-r--r--drivers/iio/common/ssp_sensors/ssp_spi.c8
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c3
4 files changed, 23 insertions, 31 deletions
diff --git a/drivers/iio/common/ssp_sensors/ssp.h b/drivers/iio/common/ssp_sensors/ssp.h
index 0a381bb1ae6f..abb832795619 100644
--- a/drivers/iio/common/ssp_sensors/ssp.h
+++ b/drivers/iio/common/ssp_sensors/ssp.h
@@ -7,7 +7,7 @@
#define __SSP_SENSORHUB_H__
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/iio/common/ssp_sensors.h>
#include <linux/iio/iio.h>
#include <linux/spi/spi.h>
@@ -168,9 +168,9 @@ struct ssp_sensorhub_info {
* @fw_dl_state: firmware download state
* @comm_lock: lock protecting the handshake
* @pending_lock: lock protecting pending list and completion
- * @mcu_reset_gpio: mcu reset line
- * @ap_mcu_gpio: ap to mcu gpio line
- * @mcu_ap_gpio: mcu to ap gpio line
+ * @mcu_reset_gpiod: mcu reset line
+ * @ap_mcu_gpiod: ap to mcu gpio line
+ * @mcu_ap_gpiod: mcu to ap gpio line
* @pending_list: pending list for messages queued to be sent/read
* @sensor_devs: registered IIO devices table
* @enable_refcount: enable reference count for wdt (watchdog timer)
@@ -212,9 +212,9 @@ struct ssp_data {
struct mutex comm_lock;
struct mutex pending_lock;
- int mcu_reset_gpio;
- int ap_mcu_gpio;
- int mcu_ap_gpio;
+ struct gpio_desc *mcu_reset_gpiod;
+ struct gpio_desc *ap_mcu_gpiod;
+ struct gpio_desc *mcu_ap_gpiod;
struct list_head pending_list;
diff --git a/drivers/iio/common/ssp_sensors/ssp_dev.c b/drivers/iio/common/ssp_sensors/ssp_dev.c
index 9c70553994c6..a94dbcf491ce 100644
--- a/drivers/iio/common/ssp_sensors/ssp_dev.c
+++ b/drivers/iio/common/ssp_sensors/ssp_dev.c
@@ -9,7 +9,6 @@
#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/of_platform.h>
#include "ssp.h"
@@ -61,9 +60,9 @@ static const struct mfd_cell sensorhub_sensor_devs[] = {
static void ssp_toggle_mcu_reset_gpio(struct ssp_data *data)
{
- gpio_set_value(data->mcu_reset_gpio, 0);
+ gpiod_set_value(data->mcu_reset_gpiod, 0);
usleep_range(1000, 1200);
- gpio_set_value(data->mcu_reset_gpio, 1);
+ gpiod_set_value(data->mcu_reset_gpiod, 1);
msleep(50);
}
@@ -441,7 +440,6 @@ MODULE_DEVICE_TABLE(of, ssp_of_match);
static struct ssp_data *ssp_parse_dt(struct device *dev)
{
- int ret;
struct ssp_data *data;
struct device_node *node = dev->of_node;
const struct of_device_id *match;
@@ -450,26 +448,17 @@ static struct ssp_data *ssp_parse_dt(struct device *dev)
if (!data)
return NULL;
- data->mcu_ap_gpio = of_get_named_gpio(node, "mcu-ap-gpios", 0);
- if (data->mcu_ap_gpio < 0)
- return NULL;
-
- data->ap_mcu_gpio = of_get_named_gpio(node, "ap-mcu-gpios", 0);
- if (data->ap_mcu_gpio < 0)
- return NULL;
-
- data->mcu_reset_gpio = of_get_named_gpio(node, "mcu-reset-gpios", 0);
- if (data->mcu_reset_gpio < 0)
+ data->mcu_ap_gpiod = devm_gpiod_get(dev, "mcu-ap", GPIOD_IN);
+ if (IS_ERR(data->mcu_ap_gpiod))
return NULL;
- ret = devm_gpio_request_one(dev, data->ap_mcu_gpio, GPIOF_OUT_INIT_HIGH,
- "ap-mcu-gpios");
- if (ret)
+ data->ap_mcu_gpiod = devm_gpiod_get(dev, "ap-mcu", GPIOD_OUT_HIGH);
+ if (IS_ERR(data->ap_mcu_gpiod))
return NULL;
- ret = devm_gpio_request_one(dev, data->mcu_reset_gpio,
- GPIOF_OUT_INIT_HIGH, "mcu-reset-gpios");
- if (ret)
+ data->mcu_reset_gpiod = devm_gpiod_get(dev, "mcu-reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(data->mcu_reset_gpiod))
return NULL;
match = of_match_node(ssp_of_match, node);
diff --git a/drivers/iio/common/ssp_sensors/ssp_spi.c b/drivers/iio/common/ssp_sensors/ssp_spi.c
index 7db3d5886e3e..4864c38b8d1c 100644
--- a/drivers/iio/common/ssp_sensors/ssp_spi.c
+++ b/drivers/iio/common/ssp_sensors/ssp_spi.c
@@ -155,9 +155,9 @@ static int ssp_check_lines(struct ssp_data *data, bool state)
{
int delay_cnt = 0;
- gpio_set_value_cansleep(data->ap_mcu_gpio, state);
+ gpiod_set_value_cansleep(data->ap_mcu_gpiod, state);
- while (gpio_get_value_cansleep(data->mcu_ap_gpio) != state) {
+ while (gpiod_get_value_cansleep(data->mcu_ap_gpiod) != state) {
usleep_range(3000, 3500);
if (data->shut_down || delay_cnt++ > 500) {
@@ -165,7 +165,7 @@ static int ssp_check_lines(struct ssp_data *data, bool state)
__func__, state);
if (!state)
- gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
+ gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
return -ETIMEDOUT;
}
@@ -197,7 +197,7 @@ static int ssp_do_transfer(struct ssp_data *data, struct ssp_msg *msg,
status = spi_write(data->spi, msg->buffer, SSP_HEADER_SIZE);
if (status < 0) {
- gpio_set_value_cansleep(data->ap_mcu_gpio, 1);
+ gpiod_set_value_cansleep(data->ap_mcu_gpiod, 1);
dev_err(SSP_DEV, "%s spi_write fail\n", __func__);
goto _error_locked;
}
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 4a2efa00f7f2..e817537cdfb5 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -19,6 +19,9 @@
/**
* st_sensors_new_samples_available() - check if more samples came in
+ * @indio_dev: IIO device reference.
+ * @sdata: Sensor data.
+ *
* returns:
* 0 - no new samples available
* 1 - new samples available