Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for the 6.5 cycle.

New device support
- honeywell,mprls0025pa
  * New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
  * Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
  * Add support for mlx90615 Infra Red Thermometer after driver cleanup
    and refactoring to support the differences in this device.
- renesas,x9250
  * New driver and bindings for this quad potentiometer.
- rockchip,saradc
  * Add support for RK3588. Also included is a bunch of refactoring and
    cleanup for that driver.
- rohm,bu27008
  * New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
  * ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
  * New driver and bindings for this ambient light sensor.

Features
- core
  * Introduce iio_validate_own_trigger() for cases where a driver can only
    consumer a trigger it registered (detected via same parent device).
    Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
  * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
  * Enable asynchronous probe.
- rohm,bu27034
  * Enable asynchronous probe.
- ti,tmp006
  * Explicit support for DT including binding documentation.

Cleanups, minor fixes and misc improvements.
- treewide
  * Switch I2C drivers from probe_new() back to probe() - part of the
    long process of getting rid of a parameter from probe()
  * Various whitespace and typo fixes not otherwise called out.
- core
  * industrialio-buffer,Style cleanup.
  * Add documentation to extend_name field of struct iio_chan_spec to
    direct people using it towards the label infrastructure instead.
    extend_name was a design mistake a long time back so directly people
    away from it may be useful.
- adi,ad7606
  * Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
  * Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
  * Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
  * Add DT binding for this part.
- qcom,spmi-vadc
  * Allow for 1/16th prescaling used on a few devices.
  * Various changes to channel labeling and naming, including dropping
    use of fwnode_name which generates odd channel names. Small ABI
    change as a result, but not thought to be a problem for users of this
    platform.
- st,lsm6dsx
  * dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
  * Add a debug print for when legacy channel config is used.
- ti,palmas-adc
  * Drop unused i2c.h include.

* tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits)
  dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning
  dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/
  dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
  iio: adc: rockchip_saradc: Use dev_err_probe
  iio: adc: rockchip_saradc: Match alignment with open parenthesis
  iio: adc: rockchip_saradc: Use of_device_get_match_data
  iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
  iio: adc: rockchip_saradc: Add support for RK3588
  iio: adc: rockchip_saradc: Add callback functions
  iio: temperature: tmp006: Add OF device matching support
  dt-bindings: iio: temperature: Add support for tmp006
  staging: iio: Switch i2c drivers back to use .probe()
  iio: amplifiers: ad8366 Fix whitespace issue
  iio: imu: inv_icm42600: avoid frequent timestamp jitter
  MAINTAINERS: Add ROHM BU27008
  iio: light: ROHM BU27008 color sensor
  iio: kx022a: Use new iio_validate_own_trigger()
  iio: trigger: Add simple trigger_validation helper
  dt-bindings: iio: light: ROHM BU27008
  iio: mlx90614: Add MLX90615 support
  ...

51 files changed, 1576 insertions, 47 deletions

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 6fa31fcd71a1..45edba797e4c 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -289,6 +289,20 @@ config JSA1212
 	  To compile this driver as a module, choose M here:
 	  the module will be called jsa1212.
 
+config ROHM_BU27008
+	tristate "ROHM BU27008 color (RGB+C/IR) sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_GTS_HELPER
+	help
+	  Enable support for the ROHM BU27008 color sensor.
+	  The ROHM BU27008 is a sensor with 5 photodiodes (red, green,
+	  blue, clear and IR) with four configurable channels. Red and
+	  green being always available and two out of the rest three
+	  (blue, clear, IR) can be selected to be simultaneously measured.
+	  Typical application is adjusting LCD backlight of TVs,
+	  mobile phones and tablet PCs.
+
 config ROHM_BU27034
 	tristate "ROHM BU27034 ambient light sensor"
 	depends on I2C
@@ -413,6 +427,17 @@ config OPT3001
 	  If built as a dynamically linked module, it will be called
 	  opt3001.
 
+config OPT4001
+	tristate "Texas Instruments OPT4001 Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say Y or M here, you get support for Texas Instruments
+	  OPT4001 Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  opt4001.
+
 config PA12203001
 	tristate "TXC PA12203001 light and proximity sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 985f6feaccd4..c0db4c4c36ec 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -37,7 +37,9 @@ obj-$(CONFIG_MAX44000)		+= max44000.o
 obj-$(CONFIG_MAX44009)		+= max44009.o
 obj-$(CONFIG_NOA1305)		+= noa1305.o
 obj-$(CONFIG_OPT3001)		+= opt3001.o
+obj-$(CONFIG_OPT4001)		+= opt4001.o
 obj-$(CONFIG_PA12203001)	+= pa12203001.o
+obj-$(CONFIG_ROHM_BU27008)	+= rohm-bu27008.o
 obj-$(CONFIG_ROHM_BU27034)	+= rohm-bu27034.o
 obj-$(CONFIG_RPR0521)		+= rpr0521.o
 obj-$(CONFIG_SI1133)		+= si1133.o
diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c
index 210a90f44c53..5fd775a20176 100644
--- a/drivers/iio/light/adjd_s311.c
+++ b/drivers/iio/light/adjd_s311.c
@@ -270,7 +270,7 @@ static struct i2c_driver adjd_s311_driver = {
 	.driver = {
 		.name	= ADJD_S311_DRV_NAME,
 	},
-	.probe_new	= adjd_s311_probe,
+	.probe		= adjd_s311_probe,
 	.id_table	= adjd_s311_id,
 };
 module_i2c_driver(adjd_s311_driver);
diff --git a/drivers/iio/light/adux1020.c b/drivers/iio/light/adux1020.c
index 606075350d01..aa4a6c78f0aa 100644
--- a/drivers/iio/light/adux1020.c
+++ b/drivers/iio/light/adux1020.c
@@ -837,7 +837,7 @@ static struct i2c_driver adux1020_driver = {
 		.name	= ADUX1020_DRV_NAME,
 		.of_match_table = adux1020_of_match,
 	},
-	.probe_new	= adux1020_probe,
+	.probe		= adux1020_probe,
 	.id_table	= adux1020_id,
 };
 module_i2c_driver(adux1020_driver);
diff --git a/drivers/iio/light/al3010.c b/drivers/iio/light/al3010.c
index 69cc723e2ac4..8f0119f392b7 100644
--- a/drivers/iio/light/al3010.c
+++ b/drivers/iio/light/al3010.c
@@ -229,7 +229,7 @@ static struct i2c_driver al3010_driver = {
 		.of_match_table = al3010_of_match,
 		.pm = pm_sleep_ptr(&al3010_pm_ops),
 	},
-	.probe_new	= al3010_probe,
+	.probe		= al3010_probe,
 	.id_table	= al3010_id,
 };
 module_i2c_driver(al3010_driver);
diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
index 9ff28bbf34bb..d5957d85c278 100644
--- a/drivers/iio/light/al3320a.c
+++ b/drivers/iio/light/al3320a.c
@@ -16,6 +16,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/mod_devicetable.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -247,13 +248,20 @@ static const struct of_device_id al3320a_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, al3320a_of_match);
 
+static const struct acpi_device_id al3320a_acpi_match[] = {
+	{"CALS0001"},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, al3320a_acpi_match);
+
 static struct i2c_driver al3320a_driver = {
 	.driver = {
 		.name = AL3320A_DRV_NAME,
 		.of_match_table = al3320a_of_match,
 		.pm = pm_sleep_ptr(&al3320a_pm_ops),
+		.acpi_match_table = al3320a_acpi_match,
 	},
-	.probe_new	= al3320a_probe,
+	.probe		= al3320a_probe,
 	.id_table	= al3320a_id,
 };
 
diff --git a/drivers/iio/light/apds9300.c b/drivers/iio/light/apds9300.c
index 15dfb753734f..0f978b30a232 100644
--- a/drivers/iio/light/apds9300.c
+++ b/drivers/iio/light/apds9300.c
@@ -504,7 +504,7 @@ static struct i2c_driver apds9300_driver = {
 		.name	= APDS9300_DRV_NAME,
 		.pm	= pm_sleep_ptr(&apds9300_pm_ops),
 	},
-	.probe_new	= apds9300_probe,
+	.probe		= apds9300_probe,
 	.remove		= apds9300_remove,
 	.id_table	= apds9300_id,
 };
diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c
index cc5974a95bd3..1065a340b12b 100644
--- a/drivers/iio/light/apds9960.c
+++ b/drivers/iio/light/apds9960.c
@@ -1131,7 +1131,7 @@ static struct i2c_driver apds9960_driver = {
 		.pm	= &apds9960_pm_ops,
 		.acpi_match_table = apds9960_acpi_match,
 	},
-	.probe_new	= apds9960_probe,
+	.probe		= apds9960_probe,
 	.remove		= apds9960_remove,
 	.id_table	= apds9960_id,
 };
diff --git a/drivers/iio/light/as73211.c b/drivers/iio/light/as73211.c
index 2307fc531752..ec97a3a46839 100644
--- a/drivers/iio/light/as73211.c
+++ b/drivers/iio/light/as73211.c
@@ -790,7 +790,7 @@ static struct i2c_driver as73211_driver = {
 		.of_match_table = as73211_of_match,
 		.pm             = pm_sleep_ptr(&as73211_pm_ops),
 	},
-	.probe_new  = as73211_probe,
+	.probe      = as73211_probe,
 	.id_table   = as73211_id,
 };
 module_i2c_driver(as73211_driver);
diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
index 390c5b3ad4f6..4b869fa9e5b1 100644
--- a/drivers/iio/light/bh1750.c
+++ b/drivers/iio/light/bh1750.c
@@ -320,7 +320,7 @@ static struct i2c_driver bh1750_driver = {
 		.of_match_table = bh1750_of_match,
 		.pm = pm_sleep_ptr(&bh1750_pm_ops),
 	},
-	.probe_new = bh1750_probe,
+	.probe = bh1750_probe,
 	.remove = bh1750_remove,
 	.id_table = bh1750_id,
 
diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c
index da9039e5a839..b84166c5fa06 100644
--- a/drivers/iio/light/bh1780.c
+++ b/drivers/iio/light/bh1780.c
@@ -269,7 +269,7 @@ static const struct of_device_id of_bh1780_match[] = {
 MODULE_DEVICE_TABLE(of, of_bh1780_match);
 
 static struct i2c_driver bh1780_driver = {
-	.probe_new	= bh1780_probe,
+	.probe		= bh1780_probe,
 	.remove		= bh1780_remove,
 	.id_table	= bh1780_id,
 	.driver = {
diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index d4a34a3bf00d..9df85b3999fa 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -542,7 +542,7 @@ static struct i2c_driver cm32181_driver = {
 		.of_match_table = cm32181_of_match,
 		.pm = pm_sleep_ptr(&cm32181_pm_ops),
 	},
-	.probe_new	= cm32181_probe,
+	.probe		= cm32181_probe,
 };
 
 module_i2c_driver(cm32181_driver);
diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
index 43e492f5051d..d48a70efca69 100644
--- a/drivers/iio/light/cm3232.c
+++ b/drivers/iio/light/cm3232.c
@@ -417,7 +417,7 @@ static struct i2c_driver cm3232_driver = {
 		.pm	= pm_sleep_ptr(&cm3232_pm_ops),
 	},
 	.id_table	= cm3232_id,
-	.probe_new	= cm3232_probe,
+	.probe		= cm3232_probe,
 	.remove		= cm3232_remove,
 };
 
diff --git a/drivers/iio/light/cm3323.c b/drivers/iio/light/cm3323.c
index e5ce7d0fd272..35d20207a648 100644
--- a/drivers/iio/light/cm3323.c
+++ b/drivers/iio/light/cm3323.c
@@ -266,7 +266,7 @@ static struct i2c_driver cm3323_driver = {
 		.name = CM3323_DRV_NAME,
 		.of_match_table = cm3323_of_match,
 	},
-	.probe_new	= cm3323_probe,
+	.probe		= cm3323_probe,
 	.id_table	= cm3323_id,
 };
 
diff --git a/drivers/iio/light/cm36651.c b/drivers/iio/light/cm36651.c
index 1707dbf2ce26..97e559acba2b 100644
--- a/drivers/iio/light/cm36651.c
+++ b/drivers/iio/light/cm36651.c
@@ -730,7 +730,7 @@ static struct i2c_driver cm36651_driver = {
 		.name	= "cm36651",
 		.of_match_table = cm36651_of_match,
 	},
-	.probe_new	= cm36651_probe,
+	.probe		= cm36651_probe,
 	.remove		= cm36651_remove,
 	.id_table	= cm36651_id,
 };
diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
index c0430db0038a..fec10d5e037e 100644
--- a/drivers/iio/light/gp2ap002.c
+++ b/drivers/iio/light/gp2ap002.c
@@ -710,7 +710,7 @@ static struct i2c_driver gp2ap002_driver = {
 		.of_match_table = gp2ap002_of_match,
 		.pm = pm_ptr(&gp2ap002_dev_pm_ops),
 	},
-	.probe_new = gp2ap002_probe,
+	.probe = gp2ap002_probe,
 	.remove = gp2ap002_remove,
 	.id_table = gp2ap002_id_table,
 };
diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c
index a5bf9da0d2f3..9f41724819b6 100644
--- a/drivers/iio/light/gp2ap020a00f.c
+++ b/drivers/iio/light/gp2ap020a00f.c
@@ -1609,7 +1609,7 @@ static struct i2c_driver gp2ap020a00f_driver = {
 		.name	= GP2A_I2C_NAME,
 		.of_match_table = gp2ap020a00f_of_match,
 	},
-	.probe_new	= gp2ap020a00f_probe,
+	.probe		= gp2ap020a00f_probe,
 	.remove		= gp2ap020a00f_remove,
 	.id_table	= gp2ap020a00f_id,
 };
diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index 141845fb47f9..43484c18b101 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -865,7 +865,7 @@ static struct i2c_driver isl29018_driver = {
 			.pm = pm_sleep_ptr(&isl29018_pm_ops),
 			.of_match_table = isl29018_of_match,
 		    },
-	.probe_new = isl29018_probe,
+	.probe = isl29018_probe,
 	.id_table = isl29018_id,
 };
 module_i2c_driver(isl29018_driver);
diff --git a/drivers/iio/light/isl29028.c b/drivers/iio/light/isl29028.c
index bcf3a556e41a..5694683389be 100644
--- a/drivers/iio/light/isl29028.c
+++ b/drivers/iio/light/isl29028.c
@@ -698,7 +698,7 @@ static struct i2c_driver isl29028_driver = {
 		.pm = pm_ptr(&isl29028_pm_ops),
 		.of_match_table = isl29028_of_match,
 	},
-	.probe_new = isl29028_probe,
+	.probe = isl29028_probe,
 	.remove  = isl29028_remove,
 	.id_table = isl29028_id,
 };
diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
index b4bd656ca169..f1d3356d3369 100644
--- a/drivers/iio/light/isl29125.c
+++ b/drivers/iio/light/isl29125.c
@@ -337,7 +337,7 @@ static struct i2c_driver isl29125_driver = {
 		.name	= ISL29125_DRV_NAME,
 		.pm	= pm_sleep_ptr(&isl29125_pm_ops),
 	},
-	.probe_new	= isl29125_probe,
+	.probe		= isl29125_probe,
 	.remove		= isl29125_remove,
 	.id_table	= isl29125_id,
 };
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
index d3834d0a0635..37e2807041a1 100644
--- a/drivers/iio/light/jsa1212.c
+++ b/drivers/iio/light/jsa1212.c
@@ -440,7 +440,7 @@ static struct i2c_driver jsa1212_driver = {
 		.pm	= pm_sleep_ptr(&jsa1212_pm_ops),
 		.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
 	},
-	.probe_new	= jsa1212_probe,
+	.probe		= jsa1212_probe,
 	.remove		= jsa1212_remove,
 	.id_table	= jsa1212_id,
 };
diff --git a/drivers/iio/light/ltr501.c b/drivers/iio/light/ltr501.c
index bdbd918213e4..061c122fdc5e 100644
--- a/drivers/iio/light/ltr501.c
+++ b/drivers/iio/light/ltr501.c
@@ -1641,7 +1641,7 @@ static struct i2c_driver ltr501_driver = {
 		.pm	= pm_sleep_ptr(&ltr501_pm_ops),
 		.acpi_match_table = ACPI_PTR(ltr_acpi_match),
 	},
-	.probe_new = ltr501_probe,
+	.probe = ltr501_probe,
 	.remove	= ltr501_remove,
 	.id_table = ltr501_id,
 };
diff --git a/drivers/iio/light/ltrf216a.c b/drivers/iio/light/ltrf216a.c
index 4b8ef36b6912..8de4dd849936 100644
--- a/drivers/iio/light/ltrf216a.c
+++ b/drivers/iio/light/ltrf216a.c
@@ -539,7 +539,7 @@ static struct i2c_driver ltrf216a_driver = {
 		.pm = pm_ptr(&ltrf216a_pm_ops),
 		.of_match_table = ltrf216a_of_match,
 	},
-	.probe_new = ltrf216a_probe,
+	.probe = ltrf216a_probe,
 	.id_table = ltrf216a_id,
 };
 module_i2c_driver(ltrf216a_driver);
diff --git a/drivers/iio/light/lv0104cs.c b/drivers/iio/light/lv0104cs.c
index c041fa0faa5d..a5445d58fddf 100644
--- a/drivers/iio/light/lv0104cs.c
+++ b/drivers/iio/light/lv0104cs.c
@@ -520,7 +520,7 @@ static struct i2c_driver lv0104cs_i2c_driver = {
 		.name	= "lv0104cs",
 	},
 	.id_table	= lv0104cs_id,
-	.probe_new	= lv0104cs_probe,
+	.probe		= lv0104cs_probe,
 };
 module_i2c_driver(lv0104cs_i2c_driver);
 
diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c
index 5dcabc43a30e..db96c5b73100 100644
--- a/drivers/iio/light/max44000.c
+++ b/drivers/iio/light/max44000.c
@@ -616,7 +616,7 @@ static struct i2c_driver max44000_driver = {
 		.name	= MAX44000_DRV_NAME,
 		.acpi_match_table = ACPI_PTR(max44000_acpi_match),
 	},
-	.probe_new	= max44000_probe,
+	.probe		= max44000_probe,
 	.id_table	= max44000_id,
 };
 
diff --git a/drivers/iio/light/max44009.c b/drivers/iio/light/max44009.c
index 176dcad6e8e8..61ce276e86f7 100644
--- a/drivers/iio/light/max44009.c
+++ b/drivers/iio/light/max44009.c
@@ -544,7 +544,7 @@ static struct i2c_driver max44009_driver = {
 		.name = MAX44009_DRV_NAME,
 		.of_match_table = max44009_of_match,
 	},
-	.probe_new = max44009_probe,
+	.probe = max44009_probe,
 	.id_table = max44009_id,
 };
 module_i2c_driver(max44009_driver);
diff --git a/drivers/iio/light/noa1305.c b/drivers/iio/light/noa1305.c
index eaf548d4649e..1574310020e3 100644
--- a/drivers/iio/light/noa1305.c
+++ b/drivers/iio/light/noa1305.c
@@ -278,7 +278,7 @@ static struct i2c_driver noa1305_driver = {
 		.name		= NOA1305_DRIVER_NAME,
 		.of_match_table	= noa1305_of_match,
 	},
-	.probe_new	= noa1305_probe,
+	.probe		= noa1305_probe,
 	.id_table	= noa1305_ids,
 };
 
diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
index ec4f5c2369c4..cb41e5ee8ec1 100644
--- a/drivers/iio/light/opt3001.c
+++ b/drivers/iio/light/opt3001.c
@@ -834,7 +834,7 @@ static const struct of_device_id opt3001_of_match[] = {
 MODULE_DEVICE_TABLE(of, opt3001_of_match);
 
 static struct i2c_driver opt3001_driver = {
-	.probe_new = opt3001_probe,
+	.probe = opt3001_probe,
 	.remove = opt3001_remove,
 	.id_table = opt3001_id,
 
diff --git a/drivers/iio/light/opt4001.c b/drivers/iio/light/opt4001.c
new file mode 100644
index 000000000000..502946bf9f94
--- /dev/null
+++ b/drivers/iio/light/opt4001.c
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Axis Communications AB
+ *
+ * Datasheet: https://www.ti.com/lit/gpn/opt4001
+ *
+ * Device driver for the Texas Instruments OPT4001.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+/* OPT4001 register set */
+#define OPT4001_LIGHT1_MSB    0x00
+#define OPT4001_LIGHT1_LSB    0x01
+#define OPT4001_CTRL          0x0A
+#define OPT4001_DEVICE_ID     0x11
+
+/* OPT4001 register mask */
+#define OPT4001_EXPONENT_MASK    GENMASK(15, 12)
+#define OPT4001_MSB_MASK         GENMASK(11, 0)
+#define OPT4001_LSB_MASK         GENMASK(15, 8)
+#define OPT4001_COUNTER_MASK     GENMASK(7, 4)
+#define OPT4001_CRC_MASK         GENMASK(3, 0)
+
+/* OPT4001 device id mask */
+#define OPT4001_DEVICE_ID_MASK   GENMASK(11, 0)
+
+/* OPT4001 control registers mask */
+#define OPT4001_CTRL_QWAKE_MASK          GENMASK(15, 15)
+#define OPT4001_CTRL_RANGE_MASK          GENMASK(13, 10)
+#define OPT4001_CTRL_CONV_TIME_MASK      GENMASK(9, 6)
+#define OPT4001_CTRL_OPER_MODE_MASK      GENMASK(5, 4)
+#define OPT4001_CTRL_LATCH_MASK          GENMASK(3, 3)
+#define OPT4001_CTRL_INT_POL_MASK        GENMASK(2, 2)
+#define OPT4001_CTRL_FAULT_COUNT         GENMASK(0, 1)
+
+/* OPT4001 constants */
+#define OPT4001_DEVICE_ID_VAL            0x121
+
+/* OPT4001 operating modes */
+#define OPT4001_CTRL_OPER_MODE_OFF        0x0
+#define OPT4001_CTRL_OPER_MODE_FORCED     0x1
+#define OPT4001_CTRL_OPER_MODE_ONE_SHOT   0x2
+#define OPT4001_CTRL_OPER_MODE_CONTINUOUS 0x3
+
+/* OPT4001 conversion control register definitions */
+#define OPT4001_CTRL_CONVERSION_0_6MS   0x0
+#define OPT4001_CTRL_CONVERSION_1MS     0x1
+#define OPT4001_CTRL_CONVERSION_1_8MS   0x2
+#define OPT4001_CTRL_CONVERSION_3_4MS   0x3
+#define OPT4001_CTRL_CONVERSION_6_5MS   0x4
+#define OPT4001_CTRL_CONVERSION_12_7MS  0x5
+#define OPT4001_CTRL_CONVERSION_25MS    0x6
+#define OPT4001_CTRL_CONVERSION_50MS    0x7
+#define OPT4001_CTRL_CONVERSION_100MS   0x8
+#define OPT4001_CTRL_CONVERSION_200MS   0x9
+#define OPT4001_CTRL_CONVERSION_400MS   0xa
+#define OPT4001_CTRL_CONVERSION_800MS   0xb
+
+/* OPT4001 scale light level range definitions */
+#define OPT4001_CTRL_LIGHT_SCALE_AUTO   12
+
+/* OPT4001 default values */
+#define OPT4001_DEFAULT_CONVERSION_TIME OPT4001_CTRL_CONVERSION_800MS
+
+/*
+ * The different packaging of OPT4001 has different constants used when calculating
+ * lux values.
+ */
+struct opt4001_chip_info {
+	int mul;
+	int div;
+	const char *name;
+};
+
+struct opt4001_chip {
+	struct regmap *regmap;
+	struct i2c_client *client;
+	u8 int_time;
+	const struct opt4001_chip_info *chip_info;
+};
+
+static const struct opt4001_chip_info opt4001_sot_5x3_info = {
+	.mul = 4375,
+	.div = 10000000,
+	.name = "opt4001-sot-5x3"
+};
+
+static const struct opt4001_chip_info opt4001_picostar_info = {
+	.mul = 3125,
+	.div = 10000000,
+	.name = "opt4001-picostar"
+};
+
+static const int opt4001_int_time_available[][2] = {
+	{ 0,    600 },
+	{ 0,   1000 },
+	{ 0,   1800 },
+	{ 0,   3400 },
+	{ 0,   6500 },
+	{ 0,  12700 },
+	{ 0,  25000 },
+	{ 0,  50000 },
+	{ 0, 100000 },
+	{ 0, 200000 },
+	{ 0, 400000 },
+	{ 0, 800000 },
+};
+
+/*
+ * Conversion time is integration time + time to set register
+ * this is used as integration time.
+ */
+static const int opt4001_int_time_reg[][2] = {
+	{    600,  OPT4001_CTRL_CONVERSION_0_6MS  },
+	{   1000,  OPT4001_CTRL_CONVERSION_1MS    },
+	{   1800,  OPT4001_CTRL_CONVERSION_1_8MS  },
+	{   3400,  OPT4001_CTRL_CONVERSION_3_4MS  },
+	{   6500,  OPT4001_CTRL_CONVERSION_6_5MS  },
+	{  12700,  OPT4001_CTRL_CONVERSION_12_7MS },
+	{  25000,  OPT4001_CTRL_CONVERSION_25MS   },
+	{  50000,  OPT4001_CTRL_CONVERSION_50MS   },
+	{ 100000,  OPT4001_CTRL_CONVERSION_100MS  },
+	{ 200000,  OPT4001_CTRL_CONVERSION_200MS  },
+	{ 400000,  OPT4001_CTRL_CONVERSION_400MS  },
+	{ 800000,  OPT4001_CTRL_CONVERSION_800MS  },
+};
+
+static int opt4001_als_time_to_index(const u32 als_integration_time)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(opt4001_int_time_available); i++) {
+		if (als_integration_time == opt4001_int_time_available[i][1])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static u8 opt4001_calculate_crc(u8 exp, u32 mantissa, u8 count)
+{
+	u8 crc;
+
+	crc = (hweight32(mantissa) + hweight32(exp) + hweight32(count)) % 2;
+	crc |= ((hweight32(mantissa & 0xAAAAA) + hweight32(exp & 0xA)
+		 + hweight32(count & 0xA)) % 2) << 1;
+	crc |= ((hweight32(mantissa & 0x88888) + hweight32(exp & 0x8)
+		 + hweight32(count & 0x8)) % 2) << 2;
+	crc |= (hweight32(mantissa & 0x80808) % 2) << 3;
+
+	return crc;
+}
+
+static int opt4001_read_lux_value(struct iio_dev *indio_dev,
+				  int *val, int *val2)
+{
+	struct opt4001_chip *chip = iio_priv(indio_dev);
+	struct device *dev = &chip->client->dev;
+	unsigned int light1;
+	unsigned int light2;
+	u16 msb;
+	u16 lsb;
+	u8 exp;
+	u8 count;
+	u8 crc;
+	u8 calc_crc;
+	u64 lux_raw;
+	int ret;
+
+	ret = regmap_read(chip->regmap, OPT4001_LIGHT1_MSB, &light1);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read data bytes");
+		return ret;
+	}
+
+	ret = regmap_read(chip->regmap, OPT4001_LIGHT1_LSB, &light2);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read data bytes");
+		return ret;
+	}
+
+	count = FIELD_GET(OPT4001_COUNTER_MASK, light2);
+	exp = FIELD_GET(OPT4001_EXPONENT_MASK, light1);
+	crc = FIELD_GET(OPT4001_CRC_MASK, light2);
+	msb = FIELD_GET(OPT4001_MSB_MASK, light1);
+	lsb = FIELD_GET(OPT4001_LSB_MASK, light2);
+	lux_raw = (msb << 8) + lsb;
+	calc_crc = opt4001_calculate_crc(exp, lux_raw, count);
+	if (calc_crc != crc)
+		return -EIO;
+
+	lux_raw = lux_raw << exp;
+	lux_raw = lux_raw * chip->chip_info->mul;
+	*val = div_u64_rem(lux_raw, chip->chip_info->div, val2);
+	*val2 = *val2 * 100;
+
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int opt4001_set_conf(struct opt4001_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+	u16 reg;
+	int ret;
+
+	reg = FIELD_PREP(OPT4001_CTRL_RANGE_MASK, OPT4001_CTRL_LIGHT_SCALE_AUTO);
+	reg |= FIELD_PREP(OPT4001_CTRL_CONV_TIME_MASK, chip->int_time);
+	reg |= FIELD_PREP(OPT4001_CTRL_OPER_MODE_MASK, OPT4001_CTRL_OPER_MODE_CONTINUOUS);
+
+	ret = regmap_write(chip->regmap, OPT4001_CTRL, reg);
+	if (ret)
+		dev_err(dev, "Failed to set configuration\n");
+
+	return ret;
+}
+
+static int opt4001_power_down(struct opt4001_chip *chip)
+{
+	struct device *dev = &chip->client->dev;
+	int ret;
+	unsigned int reg;
+
+	ret = regmap_read(chip->regmap, OPT4001_DEVICE_ID, &reg);
+	if (ret) {
+		dev_err(dev, "Failed to read configuration\n");
+		return ret;
+	}
+
+	/* MODE_OFF is 0x0 so just set bits to 0 */
+	reg &= ~OPT4001_CTRL_OPER_MODE_MASK;
+
+	ret = regmap_write(chip->regmap, OPT4001_CTRL, reg);
+	if (ret)
+		dev_err(dev, "Failed to set configuration to power down\n");
+
+	return ret;
+}
+
+static void opt4001_chip_off_action(void *data)
+{
+	struct opt4001_chip *chip = data;
+
+	opt4001_power_down(chip);
+}
+
+static const struct iio_chan_spec opt4001_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME)
+	},
+};
+
+static int opt4001_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct opt4001_chip *chip = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		return opt4001_read_lux_value(indio_dev, val, val2);
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = 0;
+		*val2 = opt4001_int_time_reg[chip->int_time][0];
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int opt4001_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct opt4001_chip *chip = iio_priv(indio_dev);
+	int int_time;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		int_time = opt4001_als_time_to_index(val2);
+		if (int_time < 0)
+			return int_time;
+		chip->int_time = int_time;
+		return opt4001_set_conf(chip);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int opt4001_read_available(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  const int **vals, int *type, int *length,
+				  long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		*length = ARRAY_SIZE(opt4001_int_time_available) * 2;
+		*vals = (const int *)opt4001_int_time_available;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		return IIO_AVAIL_LIST;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info opt4001_info_no_irq = {
+	.read_raw = opt4001_read_raw,
+	.write_raw = opt4001_write_raw,
+	.read_avail = opt4001_read_available,
+};
+
+static int opt4001_load_defaults(struct opt4001_chip *chip)
+{
+	chip->int_time = OPT4001_DEFAULT_CONVERSION_TIME;
+
+	return opt4001_set_conf(chip);
+}
+
+static bool opt4001_readable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case OPT4001_LIGHT1_MSB:
+	case OPT4001_LIGHT1_LSB:
+	case OPT4001_CTRL:
+	case OPT4001_DEVICE_ID:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool opt4001_writable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case OPT4001_CTRL:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool opt4001_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case OPT4001_LIGHT1_MSB:
+	case OPT4001_LIGHT1_LSB:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config opt4001_regmap_config = {
+	.name = "opt4001",
+	.reg_bits = 8,
+	.val_bits = 16,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = OPT4001_DEVICE_ID,
+	.readable_reg = opt4001_readable_reg,
+	.writeable_reg = opt4001_writable_reg,
+	.volatile_reg = opt4001_volatile_reg,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static int opt4001_probe(struct i2c_client *client)
+{
+	struct opt4001_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+	uint dev_id;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+
+	ret = devm_regulator_get_enable(&client->dev, "vdd");
+	if (ret)
+		return dev_err_probe(&client->dev, ret, "Failed to enable vdd supply\n");
+
+	chip->regmap = devm_regmap_init_i2c(client, &opt4001_regmap_config);
+	if (IS_ERR(chip->regmap))
+		return dev_err_probe(&client->dev, PTR_ERR(chip->regmap),
+				     "regmap initialization failed\n");
+	chip->client = client;
+
+	indio_dev->info = &opt4001_info_no_irq;
+
+	ret = regmap_reinit_cache(chip->regmap, &opt4001_regmap_config);
+	if (ret)
+		return dev_err_probe(&client->dev, ret,
+				     "failed to reinit regmap cache\n");
+
+	ret = regmap_read(chip->regmap, OPT4001_DEVICE_ID, &dev_id);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+			"Failed to read the device ID register\n");
+
+	dev_id = FIELD_GET(OPT4001_DEVICE_ID_MASK, dev_id);
+	if (dev_id != OPT4001_DEVICE_ID_VAL)
+		dev_warn(&client->dev, "Device ID: %#04x unknown\n", dev_id);
+
+	chip->chip_info = device_get_match_data(&client->dev);
+
+	indio_dev->channels = opt4001_channels;
+	indio_dev->num_channels = ARRAY_SIZE(opt4001_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = chip->chip_info->name;
+
+	ret = opt4001_load_defaults(chip);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to set sensor defaults\n");
+
+	ret = devm_add_action_or_reset(&client->dev,
+					opt4001_chip_off_action,
+					chip);
+	if (ret < 0)
+		return dev_err_probe(&client->dev, ret,
+				     "Failed to setup power off action\n");
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+/*
+ * The compatible string determines which constants to use depending on
+ * opt4001 packaging
+ */
+static const struct i2c_device_id opt4001_id[] = {
+	{ "opt4001-sot-5x3", (kernel_ulong_t)&opt4001_sot_5x3_info },
+	{ "opt4001-picostar", (kernel_ulong_t)&opt4001_picostar_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, opt4001_id);
+
+static const struct of_device_id opt4001_of_match[] = {
+	{ .compatible = "ti,opt4001-sot-5x3", .data = &opt4001_sot_5x3_info},
+	{ .compatible = "ti,opt4001-picostar", .data = &opt4001_picostar_info},
+	{}
+};
+MODULE_DEVICE_TABLE(of, opt4001_of_match);
+
+static struct i2c_driver opt4001_driver = {
+	.driver = {
+		.name = "opt4001",
+		.of_match_table = opt4001_of_match,
+	},
+	.probe = opt4001_probe,
+	.id_table = opt4001_id,
+};
+module_i2c_driver(opt4001_driver);
+
+MODULE_AUTHOR("Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>");
+MODULE_DESCRIPTION("Texas Instruments opt4001 ambient light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/pa12203001.c b/drivers/iio/light/pa12203001.c
index 15a666f15c27..ed241598aefb 100644
--- a/drivers/iio/light/pa12203001.c
+++ b/drivers/iio/light/pa12203001.c
@@ -474,7 +474,7 @@ static struct i2c_driver pa12203001_driver = {
 		.pm = &pa12203001_pm_ops,
 		.acpi_match_table = ACPI_PTR(pa12203001_acpi_match),
 	},
-	.probe_new = pa12203001_probe,
+	.probe = pa12203001_probe,
 	.remove = pa12203001_remove,
 	.id_table = pa12203001_id,
 
diff --git a/drivers/iio/light/rohm-bu27008.c b/drivers/iio/light/rohm-bu27008.c
new file mode 100644
index 000000000000..489902bed7f0
--- /dev/null
+++ b/drivers/iio/light/rohm-bu27008.c
@@ -0,0 +1,1026 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * BU27008 ROHM Colour Sensor
+ *
+ * Copyright (c) 2023, ROHM Semiconductor.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/units.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/iio-gts-helper.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define BU27008_REG_SYSTEM_CONTROL	0x40
+#define BU27008_MASK_SW_RESET		BIT(7)
+#define BU27008_MASK_PART_ID		GENMASK(5, 0)
+#define BU27008_ID			0x1a
+#define BU27008_REG_MODE_CONTROL1	0x41
+#define BU27008_MASK_MEAS_MODE		GENMASK(2, 0)
+#define BU27008_MASK_CHAN_SEL		GENMASK(3, 2)
+
+#define BU27008_REG_MODE_CONTROL2	0x42
+#define BU27008_MASK_RGBC_GAIN		GENMASK(7, 3)
+#define BU27008_MASK_IR_GAIN_LO		GENMASK(2, 0)
+#define BU27008_SHIFT_IR_GAIN		3
+
+#define BU27008_REG_MODE_CONTROL3	0x43
+#define BU27008_MASK_VALID		BIT(7)
+#define BU27008_MASK_INT_EN		BIT(1)
+#define BU27008_INT_EN			BU27008_MASK_INT_EN
+#define BU27008_INT_DIS			0
+#define BU27008_MASK_MEAS_EN		BIT(0)
+#define BU27008_MEAS_EN			BIT(0)
+#define BU27008_MEAS_DIS		0
+
+#define BU27008_REG_DATA0_LO		0x50
+#define BU27008_REG_DATA1_LO		0x52
+#define BU27008_REG_DATA2_LO		0x54
+#define BU27008_REG_DATA3_LO		0x56
+#define BU27008_REG_DATA3_HI		0x57
+#define BU27008_REG_MANUFACTURER_ID	0x92
+#define BU27008_REG_MAX BU27008_REG_MANUFACTURER_ID
+
+/**
+ * enum bu27008_chan_type - BU27008 channel types
+ * @BU27008_RED:	Red channel. Always via data0.
+ * @BU27008_GREEN:	Green channel. Always via data1.
+ * @BU27008_BLUE:	Blue channel. Via data2 (when used).
+ * @BU27008_CLEAR:	Clear channel. Via data2 or data3 (when used).
+ * @BU27008_IR:		IR channel. Via data3 (when used).
+ * @BU27008_NUM_CHANS:	Number of channel types.
+ */
+enum bu27008_chan_type {
+	BU27008_RED,
+	BU27008_GREEN,
+	BU27008_BLUE,
+	BU27008_CLEAR,
+	BU27008_IR,
+	BU27008_NUM_CHANS
+};
+
+/**
+ * enum bu27008_chan - BU27008 physical data channel
+ * @BU27008_DATA0:		Always red.
+ * @BU27008_DATA1:		Always green.
+ * @BU27008_DATA2:		Blue or clear.
+ * @BU27008_DATA3:		IR or clear.
+ * @BU27008_NUM_HW_CHANS:	Number of physical channels
+ */
+enum bu27008_chan {
+	BU27008_DATA0,
+	BU27008_DATA1,
+	BU27008_DATA2,
+	BU27008_DATA3,
+	BU27008_NUM_HW_CHANS
+};
+
+/* We can always measure red and green at same time */
+#define ALWAYS_SCANNABLE (BIT(BU27008_RED) | BIT(BU27008_GREEN))
+
+/* We use these data channel configs. Ensure scan_masks below follow them too */
+#define BU27008_BLUE2_CLEAR3		0x0 /* buffer is R, G, B, C */
+#define BU27008_CLEAR2_IR3		0x1 /* buffer is R, G, C, IR */
+#define BU27008_BLUE2_IR3		0x2 /* buffer is R, G, B, IR */
+
+static const unsigned long bu27008_scan_masks[] = {
+	/* buffer is R, G, B, C */
+	ALWAYS_SCANNABLE | BIT(BU27008_BLUE) | BIT(BU27008_CLEAR),
+	/* buffer is R, G, C, IR */
+	ALWAYS_SCANNABLE | BIT(BU27008_CLEAR) | BIT(BU27008_IR),
+	/* buffer is R, G, B, IR */
+	ALWAYS_SCANNABLE | BIT(BU27008_BLUE) | BIT(BU27008_IR),
+	0
+};
+
+/*
+ * Available scales with gain 1x - 1024x, timings 55, 100, 200, 400 mS
+ * Time impacts to gain: 1x, 2x, 4x, 8x.
+ *
+ * => Max total gain is HWGAIN * gain by integration time (8 * 1024) = 8192
+ *
+ * Max amplification is (HWGAIN * MAX integration-time multiplier) 1024 * 8
+ * = 8192. With NANO scale we get rid of accuracy loss when we start with the
+ * scale 16.0 for HWGAIN1, INT-TIME 55 mS. This way the nano scale for MAX
+ * total gain 8192 will be 1953125
+ */
+#define BU27008_SCALE_1X 16
+
+/* See the data sheet for the "Gain Setting" table */
+#define BU27008_GSEL_1X		0x00
+#define BU27008_GSEL_4X		0x08
+#define BU27008_GSEL_8X		0x09
+#define BU27008_GSEL_16X	0x0a
+#define BU27008_GSEL_32X	0x0b
+#define BU27008_GSEL_64X	0x0c
+#define BU27008_GSEL_256X	0x18
+#define BU27008_GSEL_512X	0x19
+#define BU27008_GSEL_1024X	0x1a
+
+static const struct iio_gain_sel_pair bu27008_gains[] = {
+	GAIN_SCALE_GAIN(1, BU27008_GSEL_1X),
+	GAIN_SCALE_GAIN(4, BU27008_GSEL_4X),
+	GAIN_SCALE_GAIN(8, BU27008_GSEL_8X),
+	GAIN_SCALE_GAIN(16, BU27008_GSEL_16X),
+	GAIN_SCALE_GAIN(32, BU27008_GSEL_32X),
+	GAIN_SCALE_GAIN(64, BU27008_GSEL_64X),
+	GAIN_SCALE_GAIN(256, BU27008_GSEL_256X),
+	GAIN_SCALE_GAIN(512, BU27008_GSEL_512X),
+	GAIN_SCALE_GAIN(1024, BU27008_GSEL_1024X),
+};
+
+static const struct iio_gain_sel_pair bu27008_gains_ir[] = {
+	GAIN_SCALE_GAIN(2, BU27008_GSEL_1X),
+	GAIN_SCALE_GAIN(4, BU27008_GSEL_4X),
+	GAIN_SCALE_GAIN(8, BU27008_GSEL_8X),
+	GAIN_SCALE_GAIN(16, BU27008_GSEL_16X),
+	GAIN_SCALE_GAIN(32, BU27008_GSEL_32X),
+	GAIN_SCALE_GAIN(64, BU27008_GSEL_64X),
+	GAIN_SCALE_GAIN(256, BU27008_GSEL_256X),
+	GAIN_SCALE_GAIN(512, BU27008_GSEL_512X),
+	GAIN_SCALE_GAIN(1024, BU27008_GSEL_1024X),
+};
+
+#define BU27008_MEAS_MODE_100MS		0x00
+#define BU27008_MEAS_MODE_55MS		0x01
+#define BU27008_MEAS_MODE_200MS		0x02
+#define BU27008_MEAS_MODE_400MS		0x04
+#define BU27008_MEAS_TIME_MAX_MS	400
+
+static const struct iio_itime_sel_mul bu27008_itimes[] = {
+	GAIN_SCALE_ITIME_US(400000, BU27008_MEAS_MODE_400MS, 8),
+	GAIN_SCALE_ITIME_US(200000, BU27008_MEAS_MODE_200MS, 4),
+	GAIN_SCALE_ITIME_US(100000, BU27008_MEAS_MODE_100MS, 2),
+	GAIN_SCALE_ITIME_US(55000, BU27008_MEAS_MODE_55MS, 1),
+};
+
+/*
+ * All the RGBC channels share the same gain.
+ * IR gain can be fine-tuned from the gain set for the RGBC by 2 bit, but this
+ * would yield quite complex gain setting. Especially since not all bit
+ * compinations are supported. And in any case setting GAIN for RGBC will
+ * always also change the IR-gain.
+ *
+ * On top of this, the selector '0' which corresponds to hw-gain 1X on RGBC,
+ * corresponds to gain 2X on IR. Rest of the selctors correspond to same gains
+ * though. This, however, makes it not possible to use shared gain for all
+ * RGBC and IR settings even though they are all changed at the one go.
+ */
+#define BU27008_CHAN(color, data, separate_avail)				\
+{										\
+	.type = IIO_INTENSITY,							\
+	.modified = 1,								\
+	.channel2 = IIO_MOD_LIGHT_##color,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |				\
+			      BIT(IIO_CHAN_INFO_SCALE),				\
+	.info_mask_separate_available = (separate_avail),			\
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),			\
+	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME),	\
+	.address = BU27008_REG_##data##_LO,					\
+	.scan_index = BU27008_##color,						\
+	.scan_type = {								\
+		.sign = 's',							\
+		.realbits = 16,							\
+		.storagebits = 16,						\
+		.endianness = IIO_LE,						\
+	},									\
+}
+
+/* For raw reads we always configure DATA3 for CLEAR */
+static const struct iio_chan_spec bu27008_channels[] = {
+	BU27008_CHAN(RED, DATA0, BIT(IIO_CHAN_INFO_SCALE)),
+	BU27008_CHAN(GREEN, DATA1, BIT(IIO_CHAN_INFO_SCALE)),
+	BU27008_CHAN(BLUE, DATA2, BIT(IIO_CHAN_INFO_SCALE)),
+	BU27008_CHAN(CLEAR, DATA2, BIT(IIO_CHAN_INFO_SCALE)),
+	/*
+	 * We don't allow setting scale for IR (because of shared gain bits).
+	 * Hence we don't advertise available ones either.
+	 */
+	BU27008_CHAN(IR, DATA3, 0),
+	IIO_CHAN_SOFT_TIMESTAMP(BU27008_NUM_CHANS),
+};
+
+struct bu27008_data {
+	struct regmap *regmap;
+	struct iio_trigger *trig;
+	struct device *dev;
+	struct iio_gts gts;
+	struct iio_gts gts_ir;
+	int irq;
+
+	/*
+	 * Prevent changing gain/time config when scale is read/written.
+	 * Similarly, protect the integration_time read/change sequence.
+	 * Prevent changing gain/time when data is read.
+	 */
+	struct mutex mutex;
+};
+
+static const struct regmap_range bu27008_volatile_ranges[] = {
+	{
+		.range_min = BU27008_REG_SYSTEM_CONTROL,	/* SWRESET */
+		.range_max = BU27008_REG_SYSTEM_CONTROL,
+	}, {
+		.range_min = BU27008_REG_MODE_CONTROL3,		/* VALID */
+		.range_max = BU27008_REG_MODE_CONTROL3,
+	}, {
+		.range_min = BU27008_REG_DATA0_LO,		/* DATA */
+		.range_max = BU27008_REG_DATA3_HI,
+	},
+};
+
+static const struct regmap_access_table bu27008_volatile_regs = {
+	.yes_ranges = &bu27008_volatile_ranges[0],
+	.n_yes_ranges = ARRAY_SIZE(bu27008_volatile_ranges),
+};
+
+static const struct regmap_range bu27008_read_only_ranges[] = {
+	{
+		.range_min = BU27008_REG_DATA0_LO,
+		.range_max = BU27008_REG_DATA3_HI,
+	}, {
+		.range_min = BU27008_REG_MANUFACTURER_ID,
+		.range_max = BU27008_REG_MANUFACTURER_ID,
+	},
+};
+
+static const struct regmap_access_table bu27008_ro_regs = {
+	.no_ranges = &bu27008_read_only_ranges[0],
+	.n_no_ranges = ARRAY_SIZE(bu27008_read_only_ranges),
+};
+
+static const struct regmap_config bu27008_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = BU27008_REG_MAX,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &bu27008_volatile_regs,
+	.wr_table = &bu27008_ro_regs,
+	/*
+	 * All register writes are serialized by the mutex which protects the
+	 * scale setting/getting. This is needed because scale is combined by
+	 * gain and integration time settings and we need to ensure those are
+	 * not read / written when scale is being computed.
+	 *
+	 * As a result of this serializing, we don't need regmap locking. Note,
+	 * this is not true if we add any configurations which are not
+	 * serialized by the mutex and which may need for example a protected
+	 * read-modify-write cycle (eg. regmap_update_bits()). Please, revise
+	 * this when adding features to the driver.
+	 */
+	.disable_locking = true,
+};
+
+#define BU27008_MAX_VALID_RESULT_WAIT_US	50000
+#define BU27008_VALID_RESULT_WAIT_QUANTA_US	1000
+
+static int bu27008_chan_read_data(struct bu27008_data *data, int reg, int *val)
+{
+	int ret, valid;
+	__le16 tmp;
+
+	ret = regmap_read_poll_timeout(data->regmap, BU27008_REG_MODE_CONTROL3,
+				       valid, (valid & BU27008_MASK_VALID),
+				       BU27008_VALID_RESULT_WAIT_QUANTA_US,
+				       BU27008_MAX_VALID_RESULT_WAIT_US);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, reg, &tmp, sizeof(tmp));
+	if (ret)
+		dev_err(data->dev, "Reading channel data failed\n");
+
+	*val = le16_to_cpu(tmp);
+
+	return ret;
+}
+
+static int bu27008_get_gain(struct bu27008_data *data, struct iio_gts *gts, int *gain)
+{
+	int ret, sel;
+
+	ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL2, &sel);
+	if (ret)
+		return ret;
+
+	sel = FIELD_GET(BU27008_MASK_RGBC_GAIN, sel);
+
+	ret = iio_gts_find_gain_by_sel(gts, sel);
+	if (ret < 0) {
+		dev_err(data->dev, "unknown gain value 0x%x\n", sel);
+		return ret;
+	}
+
+	*gain = ret;
+
+	return 0;
+}
+
+static int bu27008_write_gain_sel(struct bu27008_data *data, int sel)
+{
+	int regval;
+
+	regval = FIELD_PREP(BU27008_MASK_RGBC_GAIN, sel);
+
+	/*
+	 * We do always set also the LOW bits of IR-gain because othervice we
+	 * would risk resulting an invalid GAIN register value.
+	 *
+	 * We could allow setting separate gains for RGBC and IR when the
+	 * values were such that HW could support both gain settings.
+	 * Eg, when the shared bits were same for both gain values.
+	 *
+	 * This, however, has a negligible benefit compared to the increased
+	 * software complexity when we would need to go through the gains
+	 * for both channels separately when the integration time changes.
+	 * This would end up with nasty logic for computing gain values for
+	 * both channels - and rejecting them if shared bits changed.
+	 *
+	 * We should then build the logic by guessing what a user prefers.
+	 * RGBC or IR gains correctly set while other jumps to odd value?
+	 * Maybe look-up a value where both gains are somehow optimized
+	 * <what this somehow is, is ATM unknown to us>. Or maybe user would
+	 * expect us to reject changes when optimal gains can't be set to both
+	 * channels w/given integration time. At best that would result
+	 * solution that works well for a very specific subset of
+	 * configurations but causes unexpected corner-cases.
+	 *
+	 * So, we keep it simple. Always set same selector to IR and RGBC.
+	 * We disallow setting IR (as I expect that most of the users are
+	 * interested in RGBC). This way we can show the user that the scales
+	 * for RGBC and IR channels are different (1X Vs 2X with sel 0) while
+	 * still keeping the operation deterministic.
+	 */
+	regval |= FIELD_PREP(BU27008_MASK_IR_GAIN_LO, sel);
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL2,
+				  BU27008_MASK_RGBC_GAIN, regval);
+}
+
+static int bu27008_set_gain(struct bu27008_data *data, int gain)
+{
+	int ret;
+
+	ret = iio_gts_find_sel_by_gain(&data->gts, gain);
+	if (ret < 0)
+		return ret;
+
+	return bu27008_write_gain_sel(data, ret);
+}
+
+static int bu27008_get_int_time_sel(struct bu27008_data *data, int *sel)
+{
+	int ret, val;
+
+	ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL1, &val);
+	*sel = FIELD_GET(BU27008_MASK_MEAS_MODE, val);
+
+	return ret;
+}
+
+static int bu27008_set_int_time_sel(struct bu27008_data *data, int sel)
+{
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL1,
+				  BU27008_MASK_MEAS_MODE, sel);
+}
+
+static int bu27008_get_int_time_us(struct bu27008_data *data)
+{
+	int ret, sel;
+
+	ret = bu27008_get_int_time_sel(data, &sel);
+	if (ret)
+		return ret;
+
+	return iio_gts_find_int_time_by_sel(&data->gts, sel);
+}
+
+static int _bu27008_get_scale(struct bu27008_data *data, bool ir, int *val,
+			      int *val2)
+{
+	struct iio_gts *gts;
+	int gain, ret;
+
+	if (ir)
+		gts = &data->gts_ir;
+	else
+		gts = &data->gts;
+
+	ret = bu27008_get_gain(data, gts, &gain);
+	if (ret)
+		return ret;
+
+	ret = bu27008_get_int_time_us(data);
+	if (ret < 0)
+		return ret;
+
+	return iio_gts_get_scale(gts, gain, ret, val, val2);
+}
+
+static int bu27008_get_scale(struct bu27008_data *data, bool ir, int *val,
+			     int *val2)
+{
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = _bu27008_get_scale(data, ir, val, val2);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bu27008_set_int_time(struct bu27008_data *data, int time)
+{
+	int ret;
+
+	ret = iio_gts_find_sel_by_int_time(&data->gts, time);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL1,
+				  BU27008_MASK_MEAS_MODE, ret);
+}
+
+/* Try to change the time so that the scale is maintained */
+static int bu27008_try_set_int_time(struct bu27008_data *data, int int_time_new)
+{
+	int ret, old_time_sel, new_time_sel,  old_gain, new_gain;
+
+	mutex_lock(&data->mutex);
+
+	ret = bu27008_get_int_time_sel(data, &old_time_sel);
+	if (ret < 0)
+		goto unlock_out;
+
+	if (!iio_gts_valid_time(&data->gts, int_time_new)) {
+		dev_dbg(data->dev, "Unsupported integration time %u\n",
+			int_time_new);
+
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+
+	/* If we already use requested time, then we're done */
+	new_time_sel = iio_gts_find_sel_by_int_time(&data->gts, int_time_new);
+	if (new_time_sel == old_time_sel)
+		goto unlock_out;
+
+	ret = bu27008_get_gain(data, &data->gts, &old_gain);
+	if (ret)
+		goto unlock_out;
+
+	ret = iio_gts_find_new_gain_sel_by_old_gain_time(&data->gts, old_gain,
+				old_time_sel, new_time_sel, &new_gain);
+	if (ret) {
+		int scale1, scale2;
+		bool ok;
+
+		_bu27008_get_scale(data, false, &scale1, &scale2);
+		dev_dbg(data->dev,
+			"Can't support time %u with current scale %u %u\n",
+			int_time_new, scale1, scale2);
+
+		if (new_gain < 0)
+			goto unlock_out;
+
+		/*
+		 * If caller requests for integration time change and we
+		 * can't support the scale - then the caller should be
+		 * prepared to 'pick up the pieces and deal with the
+		 * fact that the scale changed'.
+		 */
+		ret = iio_find_closest_gain_low(&data->gts, new_gain, &ok);
+		if (!ok)
+			dev_dbg(data->dev, "optimal gain out of range\n");
+
+		if (ret < 0) {
+			dev_dbg(data->dev,
+				 "Total gain increase. Risk of saturation");
+			ret = iio_gts_get_min_gain(&data->gts);
+			if (ret < 0)
+				goto unlock_out;
+		}
+		new_gain = ret;
+		dev_dbg(data->dev, "scale changed, new gain %u\n", new_gain);
+	}
+
+	ret = bu27008_set_gain(data, new_gain);
+	if (ret)
+		goto unlock_out;
+
+	ret = bu27008_set_int_time(data, int_time_new);
+
+unlock_out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bu27008_meas_set(struct bu27008_data *data, int state)
+{
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				  BU27008_MASK_MEAS_EN, state);
+}
+
+static int bu27008_chan_cfg(struct bu27008_data *data,
+			    struct iio_chan_spec const *chan)
+{
+	int chan_sel;
+
+	if (chan->scan_index == BU27008_BLUE)
+		chan_sel = BU27008_BLUE2_CLEAR3;
+	else
+		chan_sel = BU27008_CLEAR2_IR3;
+
+	chan_sel = FIELD_PREP(BU27008_MASK_CHAN_SEL, chan_sel);
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				  BU27008_MASK_CHAN_SEL, chan_sel);
+}
+
+static int bu27008_read_one(struct bu27008_data *data, struct iio_dev *idev,
+			    struct iio_chan_spec const *chan, int *val, int *val2)
+{
+	int ret, int_time;
+
+	ret = bu27008_chan_cfg(data, chan);
+	if (ret)
+		return ret;
+
+	ret = bu27008_meas_set(data, BU27008_MEAS_EN);
+	if (ret)
+		return ret;
+
+	ret = bu27008_get_int_time_us(data);
+	if (ret < 0)
+		int_time = BU27008_MEAS_TIME_MAX_MS;
+	else
+		int_time = ret / USEC_PER_MSEC;
+
+	msleep(int_time);
+
+	ret = bu27008_chan_read_data(data, chan->address, val);
+	if (!ret)
+		ret = IIO_VAL_INT;
+
+	if (bu27008_meas_set(data, BU27008_MEAS_DIS))
+		dev_warn(data->dev, "measurement disabling failed\n");
+
+	return ret;
+}
+
+static int bu27008_read_raw(struct iio_dev *idev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+	int busy, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		busy = iio_device_claim_direct_mode(idev);
+		if (busy)
+			return -EBUSY;
+
+		mutex_lock(&data->mutex);
+		ret = bu27008_read_one(data, idev, chan, val, val2);
+		mutex_unlock(&data->mutex);
+
+		iio_device_release_direct_mode(idev);
+
+		return ret;
+
+	case IIO_CHAN_INFO_SCALE:
+		ret = bu27008_get_scale(data, chan->scan_index == BU27008_IR,
+					val, val2);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT_PLUS_NANO;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		ret = bu27008_get_int_time_us(data);
+		if (ret < 0)
+			return ret;
+
+		*val = 0;
+		*val2 = ret;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Called if the new scale could not be supported with existing int-time */
+static int bu27008_try_find_new_time_gain(struct bu27008_data *data, int val,
+					  int val2, int *gain_sel)
+{
+	int i, ret, new_time_sel;
+
+	for (i = 0; i < data->gts.num_itime; i++) {
+		new_time_sel = data->gts.itime_table[i].sel;
+		ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts,
+					new_time_sel, val, val2 * 1000, gain_sel);
+		if (!ret)
+			break;
+	}
+	if (i == data->gts.num_itime) {
+		dev_err(data->dev, "Can't support scale %u %u\n", val, val2);
+
+		return -EINVAL;
+	}
+
+	return bu27008_set_int_time_sel(data, new_time_sel);
+}
+
+static int bu27008_set_scale(struct bu27008_data *data,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2)
+{
+	int ret, gain_sel, time_sel;
+
+	if (chan->scan_index == BU27008_IR)
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	ret = bu27008_get_int_time_sel(data, &time_sel);
+	if (ret < 0)
+		goto unlock_out;
+
+	ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, time_sel,
+						val, val2 * 1000, &gain_sel);
+	if (ret) {
+		ret = bu27008_try_find_new_time_gain(data, val, val2, &gain_sel);
+		if (ret)
+			goto unlock_out;
+
+	}
+	ret = bu27008_write_gain_sel(data, gain_sel);
+
+unlock_out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int bu27008_write_raw(struct iio_dev *idev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+	int ret;
+
+	/*
+	 * Do not allow changing scale when measurement is ongoing as doing so
+	 * could make values in the buffer inconsistent.
+	 */
+	ret = iio_device_claim_direct_mode(idev);
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = bu27008_set_scale(data, chan, val, val2);
+		break;
+	case IIO_CHAN_INFO_INT_TIME:
+		if (val) {
+			ret = -EINVAL;
+			break;
+		}
+		ret = bu27008_try_set_int_time(data, val2);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	iio_device_release_direct_mode(idev);
+
+	return ret;
+}
+
+static int bu27008_read_avail(struct iio_dev *idev,
+			      struct iio_chan_spec const *chan, const int **vals,
+			      int *type, int *length, long mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_INT_TIME:
+		return iio_gts_avail_times(&data->gts, vals, type, length);
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->channel2 == IIO_MOD_LIGHT_IR)
+			return iio_gts_all_avail_scales(&data->gts_ir, vals,
+							type, length);
+		return iio_gts_all_avail_scales(&data->gts, vals, type, length);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bu27008_update_scan_mode(struct iio_dev *idev,
+				    const unsigned long *scan_mask)
+{
+	struct bu27008_data *data = iio_priv(idev);
+	int chan_sel;
+
+	/* Configure channel selection */
+	if (test_bit(BU27008_BLUE, idev->active_scan_mask)) {
+		if (test_bit(BU27008_CLEAR, idev->active_scan_mask))
+			chan_sel = BU27008_BLUE2_CLEAR3;
+		else
+			chan_sel = BU27008_BLUE2_IR3;
+	} else {
+		chan_sel = BU27008_CLEAR2_IR3;
+	}
+
+	chan_sel = FIELD_PREP(BU27008_MASK_CHAN_SEL, chan_sel);
+
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				 BU27008_MASK_CHAN_SEL, chan_sel);
+}
+
+static const struct iio_info bu27008_info = {
+	.read_raw = &bu27008_read_raw,
+	.write_raw = &bu27008_write_raw,
+	.read_avail = &bu27008_read_avail,
+	.update_scan_mode = bu27008_update_scan_mode,
+	.validate_trigger = iio_validate_own_trigger,
+};
+
+static int bu27008_chip_init(struct bu27008_data *data)
+{
+	int ret;
+
+	ret = regmap_write_bits(data->regmap, BU27008_REG_SYSTEM_CONTROL,
+				BU27008_MASK_SW_RESET, BU27008_MASK_SW_RESET);
+	if (ret)
+		return dev_err_probe(data->dev, ret, "Sensor reset failed\n");
+
+	/*
+	 * The data-sheet does not tell how long performing the IC reset takes.
+	 * However, the data-sheet says the minimum time it takes the IC to be
+	 * able to take inputs after power is applied, is 100 uS. I'd assume
+	 * > 1 mS is enough.
+	 */
+	msleep(1);
+
+	ret = regmap_reinit_cache(data->regmap, &bu27008_regmap);
+	if (ret)
+		dev_err(data->dev, "Failed to reinit reg cache\n");
+
+	return ret;
+}
+
+static int bu27008_set_drdy_irq(struct bu27008_data *data, int state)
+{
+	return regmap_update_bits(data->regmap, BU27008_REG_MODE_CONTROL3,
+				 BU27008_MASK_INT_EN, state);
+}
+
+static int bu27008_trigger_set_state(struct iio_trigger *trig,
+				     bool state)
+{
+	struct bu27008_data *data = iio_trigger_get_drvdata(trig);
+	int ret;
+
+	if (state)
+		ret = bu27008_set_drdy_irq(data, BU27008_INT_EN);
+	else
+		ret = bu27008_set_drdy_irq(data, BU27008_INT_DIS);
+	if (ret)
+		dev_err(data->dev, "Failed to set trigger state\n");
+
+	return ret;
+}
+
+static void bu27008_trigger_reenable(struct iio_trigger *trig)
+{
+	struct bu27008_data *data = iio_trigger_get_drvdata(trig);
+
+	enable_irq(data->irq);
+}
+
+static const struct iio_trigger_ops bu27008_trigger_ops = {
+	.set_trigger_state = bu27008_trigger_set_state,
+	.reenable = bu27008_trigger_reenable,
+};
+
+static irqreturn_t bu27008_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *idev = pf->indio_dev;
+	struct bu27008_data *data = iio_priv(idev);
+	struct {
+		__le16 chan[BU27008_NUM_HW_CHANS];
+		s64 ts __aligned(8);
+	} raw;
+	int ret, dummy;
+
+	memset(&raw, 0, sizeof(raw));
+
+	/*
+	 * After some measurements, it seems reading the
+	 * BU27008_REG_MODE_CONTROL3 debounces the IRQ line
+	 */
+	ret = regmap_read(data->regmap, BU27008_REG_MODE_CONTROL3, &dummy);
+	if (ret < 0)
+		goto err_read;
+
+	ret = regmap_bulk_read(data->regmap, BU27008_REG_DATA0_LO, &raw.chan,
+			       sizeof(raw.chan));
+	if (ret < 0)
+		goto err_read;
+
+	iio_push_to_buffers_with_timestamp(idev, &raw, pf->timestamp);
+err_read:
+	iio_trigger_notify_done(idev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int bu27008_buffer_preenable(struct iio_dev *idev)
+{
+	struct bu27008_data *data = iio_priv(idev);
+
+	return bu27008_meas_set(data, BU27008_MEAS_EN);
+}
+
+static int bu27008_buffer_postdisable(struct iio_dev *idev)
+{
+	struct bu27008_data *data = iio_priv(idev);
+
+	return bu27008_meas_set(data, BU27008_MEAS_DIS);
+}
+
+static const struct iio_buffer_setup_ops bu27008_buffer_ops = {
+	.preenable = bu27008_buffer_preenable,
+	.postdisable = bu27008_buffer_postdisable,
+};
+
+static irqreturn_t bu27008_data_rdy_poll(int irq, void *private)
+{
+	/*
+	 * The BU27008 keeps IRQ asserted until we read the VALID bit from
+	 * a register. We need to keep the IRQ disabled until then.
+	 */
+	disable_irq_nosync(irq);
+	iio_trigger_poll(private);
+
+	return IRQ_HANDLED;
+}
+
+static int bu27008_setup_trigger(struct bu27008_data *data, struct iio_dev *idev)
+{
+	struct iio_trigger *itrig;
+	char *name;
+	int ret;
+
+	ret = devm_iio_triggered_buffer_setup(data->dev, idev,
+					      &iio_pollfunc_store_time,
+					      bu27008_trigger_handler,
+					      &bu27008_buffer_ops);
+	if (ret)
+		return dev_err_probe(data->dev, ret,
+			     "iio_triggered_buffer_setup_ext FAIL\n");
+
+	itrig = devm_iio_trigger_alloc(data->dev, "%sdata-rdy-dev%d",
+				       idev->name, iio_device_id(idev));
+	if (!itrig)
+		return -ENOMEM;
+
+	data->trig = itrig;
+
+	itrig->ops = &bu27008_trigger_ops;
+	iio_trigger_set_drvdata(itrig, data);
+
+	name = devm_kasprintf(data->dev, GFP_KERNEL, "%s-bu27008",
+			      dev_name(data->dev));
+
+	ret = devm_request_irq(data->dev, data->irq,
+			       &bu27008_data_rdy_poll,
+			       0, name, itrig);
+	if (ret)
+		return dev_err_probe(data->dev, ret, "Could not request IRQ\n");
+
+	ret = devm_iio_trigger_register(data->dev, itrig);
+	if (ret)
+		return dev_err_probe(data->dev, ret,
+				     "Trigger registration failed\n");
+
+	/* set default trigger */
+	idev->trig = iio_trigger_get(itrig);
+
+	return 0;
+}
+
+static int bu27008_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct bu27008_data *data;
+	struct regmap *regmap;
+	unsigned int part_id, reg;
+	struct iio_dev *idev;
+	int ret;
+
+	regmap = devm_regmap_init_i2c(i2c, &bu27008_regmap);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "Failed to initialize Regmap\n");
+
+	idev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!idev)
+		return -ENOMEM;
+
+	ret = devm_regulator_get_enable(dev, "vdd");
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulator\n");
+
+	data = iio_priv(idev);
+
+	ret = regmap_read(regmap, BU27008_REG_SYSTEM_CONTROL, &reg);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to access sensor\n");
+
+	part_id = FIELD_GET(BU27008_MASK_PART_ID, reg);
+
+	if (part_id != BU27008_ID)
+		dev_warn(dev, "unknown device 0x%x\n", part_id);
+
+	ret = devm_iio_init_iio_gts(dev, BU27008_SCALE_1X, 0, bu27008_gains,
+				    ARRAY_SIZE(bu27008_gains), bu27008_itimes,
+				    ARRAY_SIZE(bu27008_itimes), &data->gts);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_init_iio_gts(dev, BU27008_SCALE_1X, 0, bu27008_gains_ir,
+				    ARRAY_SIZE(bu27008_gains_ir), bu27008_itimes,
+				    ARRAY_SIZE(bu27008_itimes), &data->gts_ir);
+	if (ret)
+		return ret;
+
+	mutex_init(&data->mutex);
+	data->regmap = regmap;
+	data->dev = dev;
+	data->irq = i2c->irq;
+
+	idev->channels = bu27008_channels;
+	idev->num_channels = ARRAY_SIZE(bu27008_channels);
+	idev->name = "bu27008";
+	idev->info = &bu27008_info;
+	idev->modes = INDIO_DIRECT_MODE;
+	idev->available_scan_masks = bu27008_scan_masks;
+
+	ret = bu27008_chip_init(data);
+	if (ret)
+		return ret;
+
+	if (i2c->irq) {
+		ret = bu27008_setup_trigger(data, idev);
+		if (ret)
+			return ret;
+	} else {
+		dev_info(dev, "No IRQ, buffered mode disabled\n");
+	}
+
+	ret = devm_iio_device_register(dev, idev);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Unable to register iio device\n");
+
+	return 0;
+}
+
+static const struct of_device_id bu27008_of_match[] = {
+	{ .compatible = "rohm,bu27008" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bu27008_of_match);
+
+static struct i2c_driver bu27008_i2c_driver = {
+	.driver = {
+		.name = "bu27008",
+		.of_match_table = bu27008_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe = bu27008_probe,
+};
+module_i2c_driver(bu27008_i2c_driver);
+
+MODULE_DESCRIPTION("ROHM BU27008 colour sensor driver");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_GTS_HELPER);
diff --git a/drivers/iio/light/rohm-bu27034.c b/drivers/iio/light/rohm-bu27034.c
index f85194fda6b0..e63ef5789cde 100644
--- a/drivers/iio/light/rohm-bu27034.c
+++ b/drivers/iio/light/rohm-bu27034.c
@@ -1500,8 +1500,9 @@ static struct i2c_driver bu27034_i2c_driver = {
 	.driver = {
 		.name = "bu27034-als",
 		.of_match_table = bu27034_of_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
-	.probe_new = bu27034_probe,
+	.probe = bu27034_probe,
 };
 module_i2c_driver(bu27034_i2c_driver);
 
diff --git a/drivers/iio/light/rpr0521.c b/drivers/iio/light/rpr0521.c
index 9d0218b7426e..bbb8581622f2 100644
--- a/drivers/iio/light/rpr0521.c
+++ b/drivers/iio/light/rpr0521.c
@@ -1121,7 +1121,7 @@ static struct i2c_driver rpr0521_driver = {
 		.pm	= pm_ptr(&rpr0521_pm_ops),
 		.acpi_match_table = ACPI_PTR(rpr0521_acpi_match),
 	},
-	.probe_new	= rpr0521_probe,
+	.probe		= rpr0521_probe,
 	.remove		= rpr0521_remove,
 	.id_table	= rpr0521_id,
 };
diff --git a/drivers/iio/light/si1133.c b/drivers/iio/light/si1133.c
index a08fbc8f5adb..ea2c437199c0 100644
--- a/drivers/iio/light/si1133.c
+++ b/drivers/iio/light/si1133.c
@@ -1064,7 +1064,7 @@ static struct i2c_driver si1133_driver = {
 	.driver = {
 	    .name   = "si1133",
 	},
-	.probe_new = si1133_probe,
+	.probe = si1133_probe,
 	.id_table = si1133_ids,
 };
 
diff --git a/drivers/iio/light/si1145.c b/drivers/iio/light/si1145.c
index f7126235f94c..77666b780a5c 100644
--- a/drivers/iio/light/si1145.c
+++ b/drivers/iio/light/si1145.c
@@ -1352,7 +1352,7 @@ static struct i2c_driver si1145_driver = {
 	.driver = {
 		.name   = "si1145",
 	},
-	.probe_new = si1145_probe,
+	.probe = si1145_probe,
 	.id_table = si1145_ids,
 };
 
diff --git a/drivers/iio/light/st_uvis25_i2c.c b/drivers/iio/light/st_uvis25_i2c.c
index 2160e87bb498..6bc2ddfb77ca 100644
--- a/drivers/iio/light/st_uvis25_i2c.c
+++ b/drivers/iio/light/st_uvis25_i2c.c
@@ -57,7 +57,7 @@ static struct i2c_driver st_uvis25_driver = {
 		.pm = pm_sleep_ptr(&st_uvis25_pm_ops),
 		.of_match_table = st_uvis25_i2c_of_match,
 	},
-	.probe_new = st_uvis25_i2c_probe,
+	.probe = st_uvis25_i2c_probe,
 	.id_table = st_uvis25_i2c_id_table,
 };
 module_i2c_driver(st_uvis25_driver);
diff --git a/drivers/iio/light/stk3310.c b/drivers/iio/light/stk3310.c
index 48ae6ff0015e..72b08d870d33 100644
--- a/drivers/iio/light/stk3310.c
+++ b/drivers/iio/light/stk3310.c
@@ -714,7 +714,7 @@ static struct i2c_driver stk3310_driver = {
 		.pm = pm_sleep_ptr(&stk3310_pm_ops),
 		.acpi_match_table = ACPI_PTR(stk3310_acpi_id),
 	},
-	.probe_new =        stk3310_probe,
+	.probe =        stk3310_probe,
 	.remove =           stk3310_remove,
 	.id_table =         stk3310_i2c_id,
 };
diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index 5100732fbaf0..dcdd85b006be 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -373,7 +373,7 @@ static struct i2c_driver tcs3414_driver = {
 		.name	= TCS3414_DRV_NAME,
 		.pm	= pm_sleep_ptr(&tcs3414_pm_ops),
 	},
-	.probe_new	= tcs3414_probe,
+	.probe		= tcs3414_probe,
 	.id_table	= tcs3414_id,
 };
 module_i2c_driver(tcs3414_driver);
diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c
index 6187c5487916..75fcf2c93717 100644
--- a/drivers/iio/light/tcs3472.c
+++ b/drivers/iio/light/tcs3472.c
@@ -609,7 +609,7 @@ static struct i2c_driver tcs3472_driver = {
 		.name	= TCS3472_DRV_NAME,
 		.pm	= pm_sleep_ptr(&tcs3472_pm_ops),
 	},
-	.probe_new	= tcs3472_probe,
+	.probe		= tcs3472_probe,
 	.remove		= tcs3472_remove,
 	.id_table	= tcs3472_id,
 };
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index f2f55239a072..1a6f514bced6 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -862,7 +862,7 @@ static struct i2c_driver tsl2563_i2c_driver = {
 		.of_match_table = tsl2563_of_match,
 		.pm	= pm_sleep_ptr(&tsl2563_pm_ops),
 	},
-	.probe_new	= tsl2563_probe,
+	.probe		= tsl2563_probe,
 	.remove		= tsl2563_remove,
 	.id_table	= tsl2563_id,
 };
diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
index a05f1c0453d1..02ad11611b9c 100644
--- a/drivers/iio/light/tsl2583.c
+++ b/drivers/iio/light/tsl2583.c
@@ -942,7 +942,7 @@ static struct i2c_driver tsl2583_driver = {
 		.of_match_table = tsl2583_of_match,
 	},
 	.id_table = tsl2583_idtable,
-	.probe_new = tsl2583_probe,
+	.probe = tsl2583_probe,
 	.remove = tsl2583_remove,
 };
 module_i2c_driver(tsl2583_driver);
diff --git a/drivers/iio/light/tsl2591.c b/drivers/iio/light/tsl2591.c
index e485a556e6da..7bdbfe72f0f0 100644
--- a/drivers/iio/light/tsl2591.c
+++ b/drivers/iio/light/tsl2591.c
@@ -1214,7 +1214,7 @@ static struct i2c_driver tsl2591_driver = {
 		.pm = pm_ptr(&tsl2591_pm_ops),
 		.of_match_table = tsl2591_of_match,
 	},
-	.probe_new = tsl2591_probe
+	.probe = tsl2591_probe
 };
 module_i2c_driver(tsl2591_driver);
 
diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
index e823c145f679..cab468a82b61 100644
--- a/drivers/iio/light/tsl2772.c
+++ b/drivers/iio/light/tsl2772.c
@@ -1932,7 +1932,7 @@ static struct i2c_driver tsl2772_driver = {
 		.pm = &tsl2772_pm_ops,
 	},
 	.id_table = tsl2772_idtable,
-	.probe_new = tsl2772_probe,
+	.probe = tsl2772_probe,
 };
 
 module_i2c_driver(tsl2772_driver);
diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
index d95397eb1526..4da7d78906d4 100644
--- a/drivers/iio/light/tsl4531.c
+++ b/drivers/iio/light/tsl4531.c
@@ -237,7 +237,7 @@ static struct i2c_driver tsl4531_driver = {
 		.name   = TSL4531_DRV_NAME,
 		.pm	= pm_sleep_ptr(&tsl4531_pm_ops),
 	},
-	.probe_new = tsl4531_probe,
+	.probe = tsl4531_probe,
 	.remove = tsl4531_remove,
 	.id_table = tsl4531_id,
 };
diff --git a/drivers/iio/light/us5182d.c b/drivers/iio/light/us5182d.c
index 8b2a0c99c8e6..61b3b2aea626 100644
--- a/drivers/iio/light/us5182d.c
+++ b/drivers/iio/light/us5182d.c
@@ -974,7 +974,7 @@ static struct i2c_driver us5182d_driver = {
 		.of_match_table = us5182d_of_match,
 		.acpi_match_table = ACPI_PTR(us5182d_acpi_match),
 	},
-	.probe_new = us5182d_probe,
+	.probe = us5182d_probe,
 	.remove = us5182d_remove,
 	.id_table = us5182d_id,
 
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 56d3963d3d66..7c7362e28821 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -1500,7 +1500,7 @@ static struct i2c_driver vcnl4000_driver = {
 		.pm	= pm_ptr(&vcnl4000_pm_ops),
 		.of_match_table = vcnl_4000_of_match,
 	},
-	.probe_new = vcnl4000_probe,
+	.probe = vcnl4000_probe,
 	.id_table = vcnl4000_id,
 	.remove	= vcnl4000_remove,
 };
diff --git a/drivers/iio/light/vcnl4035.c b/drivers/iio/light/vcnl4035.c
index 94f5d611e98c..56bbefbc0ae6 100644
--- a/drivers/iio/light/vcnl4035.c
+++ b/drivers/iio/light/vcnl4035.c
@@ -670,7 +670,7 @@ static struct i2c_driver vcnl4035_driver = {
 		.pm	= pm_ptr(&vcnl4035_pm_ops),
 		.of_match_table = vcnl4035_of_match,
 	},
-	.probe_new = vcnl4035_probe,
+	.probe = vcnl4035_probe,
 	.remove	= vcnl4035_remove,
 	.id_table = vcnl4035_id,
 };
diff --git a/drivers/iio/light/veml6030.c b/drivers/iio/light/veml6030.c
index e7d2d5d177d4..043f233d9bdb 100644
--- a/drivers/iio/light/veml6030.c
+++ b/drivers/iio/light/veml6030.c
@@ -892,7 +892,7 @@ static struct i2c_driver veml6030_driver = {
 		.of_match_table = veml6030_of_match,
 		.pm = pm_ptr(&veml6030_pm_ops),
 	},
-	.probe_new = veml6030_probe,
+	.probe = veml6030_probe,
 	.id_table = veml6030_id,
 };
 module_i2c_driver(veml6030_driver);
diff --git a/drivers/iio/light/veml6070.c b/drivers/iio/light/veml6070.c
index ee76a68deb24..d99bf3ae0fe8 100644
--- a/drivers/iio/light/veml6070.c
+++ b/drivers/iio/light/veml6070.c
@@ -198,7 +198,7 @@ static struct i2c_driver veml6070_driver = {
 	.driver = {
 		.name   = VEML6070_DRV_NAME,
 	},
-	.probe_new = veml6070_probe,
+	.probe = veml6070_probe,
 	.remove  = veml6070_remove,
 	.id_table = veml6070_id,
 };
diff --git a/drivers/iio/light/vl6180.c b/drivers/iio/light/vl6180.c
index 8b56df26c59e..d4948dfc31ff 100644
--- a/drivers/iio/light/vl6180.c
+++ b/drivers/iio/light/vl6180.c
@@ -538,7 +538,7 @@ static struct i2c_driver vl6180_driver = {
 		.name   = VL6180_DRV_NAME,
 		.of_match_table = vl6180_of_match,
 	},
-	.probe_new = vl6180_probe,
+	.probe = vl6180_probe,
 	.id_table = vl6180_id,
 };
 
diff --git a/drivers/iio/light/zopt2201.c b/drivers/iio/light/zopt2201.c
index e3bac8b56380..d370193a4742 100644
--- a/drivers/iio/light/zopt2201.c
+++ b/drivers/iio/light/zopt2201.c
@@ -554,7 +554,7 @@ static struct i2c_driver zopt2201_driver = {
 	.driver = {
 		.name   = ZOPT2201_DRV_NAME,
 	},
-	.probe_new = zopt2201_probe,
+	.probe = zopt2201_probe,
 	.id_table = zopt2201_id,
 };