diff options
| author | Aniroop Mathur <a.mathur@samsung.com> | 2016-11-26 09:17:26 +0530 |
|---|---|---|
| committer | Jonathan Cameron <jic23@kernel.org> | 2016-12-03 08:58:40 +0000 |
| commit | 071cf2494361fd856f1a6781f9c554da67e35e3c (patch) | |
| tree | 173b553342e17952c5c58dbefe779537608ef07f /drivers/iio/pressure/bmp280-core.c | |
| parent | 160d95870c8a44480fad49dc09fa4f0cc04e7098 (diff) | |
IIO: Change msleep to usleep_range for small msecs
msleep(1~20) may not do what the caller intends, and will often sleep longer.
(~20 ms actual sleep for any value given in the 1~20ms range)
This is not the desired behaviour for many cases like device resume time,
device suspend time, device enable time, data reading time, etc.
Thus, change msleep to usleep_range for precise wakeups.
Signed-off-by: Aniroop Mathur <a.mathur@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Diffstat (limited to 'drivers/iio/pressure/bmp280-core.c')
| -rw-r--r-- | drivers/iio/pressure/bmp280-core.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index e5a533cbd53f..4d18826ac63c 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -65,7 +65,7 @@ struct bmp280_data { struct bmp180_calib calib; struct regulator *vddd; struct regulator *vdda; - unsigned int start_up_time; /* in milliseconds */ + unsigned int start_up_time; /* in microseconds */ /* log of base 2 of oversampling rate */ u8 oversampling_press; @@ -935,14 +935,14 @@ int bmp280_common_probe(struct device *dev, data->chip_info = &bmp180_chip_info; data->oversampling_press = ilog2(8); data->oversampling_temp = ilog2(1); - data->start_up_time = 10; + data->start_up_time = 10000; break; case BMP280_CHIP_ID: indio_dev->num_channels = 2; data->chip_info = &bmp280_chip_info; data->oversampling_press = ilog2(16); data->oversampling_temp = ilog2(2); - data->start_up_time = 2; + data->start_up_time = 2000; break; case BME280_CHIP_ID: indio_dev->num_channels = 3; @@ -950,7 +950,7 @@ int bmp280_common_probe(struct device *dev, data->oversampling_press = ilog2(16); data->oversampling_humid = ilog2(16); data->oversampling_temp = ilog2(2); - data->start_up_time = 2; + data->start_up_time = 2000; break; default: return -EINVAL; @@ -979,7 +979,7 @@ int bmp280_common_probe(struct device *dev, goto out_disable_vddd; } /* Wait to make sure we started up properly */ - mdelay(data->start_up_time); + usleep_range(data->start_up_time, data->start_up_time + 100); /* Bring chip out of reset if there is an assigned GPIO line */ gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); @@ -1038,7 +1038,7 @@ int bmp280_common_probe(struct device *dev, * Set autosuspend to two orders of magnitude larger than the * start-up time. */ - pm_runtime_set_autosuspend_delay(dev, data->start_up_time *100); + pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10); pm_runtime_use_autosuspend(dev); pm_runtime_put(dev); @@ -1101,7 +1101,7 @@ static int bmp280_runtime_resume(struct device *dev) ret = regulator_enable(data->vdda); if (ret) return ret; - msleep(data->start_up_time); + usleep_range(data->start_up_time, data->start_up_time + 100); return data->chip_info->chip_config(data); } #endif /* CONFIG_PM */ |