treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

22 files changed, 37 insertions, 37 deletions

diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
index 477418b37786..a83f9eb86bfe 100644
--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -8,7 +8,7 @@ menuconfig INFINIBAND
 	depends on !ALPHA
 	select IRQ_POLL
 	select DIMLIB
-	---help---
+	help
 	  Core support for InfiniBand (IB).  Make sure to also select
 	  any protocols you wish to use as well as drivers for your
 	  InfiniBand hardware.
@@ -18,7 +18,7 @@ if INFINIBAND
 config INFINIBAND_USER_MAD
 	tristate "InfiniBand userspace MAD support"
 	depends on INFINIBAND
-	---help---
+	help
 	  Userspace InfiniBand Management Datagram (MAD) support.  This
 	  is the kernel side of the userspace MAD support, which allows
 	  userspace processes to send and receive MADs. You will also
@@ -28,7 +28,7 @@ config INFINIBAND_USER_MAD
 config INFINIBAND_USER_ACCESS
 	tristate "InfiniBand userspace access (verbs and CM)"
 	depends on MMU
-	---help---
+	help
 	  Userspace InfiniBand access support.  This enables the
 	  kernel side of userspace verbs and the userspace
 	  communication manager (CM).  This allows userspace processes
@@ -40,7 +40,7 @@ config INFINIBAND_USER_ACCESS
 config INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI
 	bool "Allow experimental legacy verbs in new ioctl uAPI  (EXPERIMENTAL)"
 	depends on INFINIBAND_USER_ACCESS
-	---help---
+	help
 	  IOCTL based uAPI support for Infiniband is enabled by default for
 	  new verbs only. This allows userspace to invoke the IOCTL based uAPI
 	  for current legacy verbs too.
@@ -57,7 +57,7 @@ config INFINIBAND_ON_DEMAND_PAGING
 	select MMU_NOTIFIER
 	select INTERVAL_TREE
 	default y
-	---help---
+	help
 	  On demand paging support for the InfiniBand subsystem.
 	  Together with driver support this allows registration of
 	  memory regions without pinning their pages, fetching the
@@ -67,7 +67,7 @@ config INFINIBAND_ADDR_TRANS
 	bool "RDMA/CM"
 	depends on INFINIBAND
 	default y
-	---help---
+	help
 	  Support for RDMA communication manager (CM).
 	  This allows for a generic connection abstraction over RDMA.
 
@@ -75,7 +75,7 @@ config INFINIBAND_ADDR_TRANS_CONFIGFS
 	bool
 	depends on INFINIBAND_ADDR_TRANS && CONFIGFS_FS && !(INFINIBAND=y && CONFIGFS_FS=m)
 	default y
-	---help---
+	help
 	  ConfigFS support for RDMA communication manager (CM).
 	  This allows the user to config the default GID type that the CM
 	  uses for each device, when initiaing new connections.
diff --git a/drivers/infiniband/hw/bnxt_re/Kconfig b/drivers/infiniband/hw/bnxt_re/Kconfig
index b83f1cc38c52..0feac5132ce1 100644
--- a/drivers/infiniband/hw/bnxt_re/Kconfig
+++ b/drivers/infiniband/hw/bnxt_re/Kconfig
@@ -5,7 +5,7 @@ config INFINIBAND_BNXT_RE
 	depends on ETHERNET && NETDEVICES && PCI && INET && DCB
 	select NET_VENDOR_BROADCOM
 	select BNXT
-	---help---
+	help
 	  This driver supports Broadcom NetXtreme-E 10/25/40/50 gigabit
 	  RoCE HCAs.  To compile this driver as a module, choose M here:
 	  the module will be called bnxt_re.
diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig
index b49e8d4c3854..9e2b2c348afd 100644
--- a/drivers/infiniband/hw/cxgb4/Kconfig
+++ b/drivers/infiniband/hw/cxgb4/Kconfig
@@ -5,7 +5,7 @@ config INFINIBAND_CXGB4
 	depends on INFINIBAND_ADDR_TRANS
 	select CHELSIO_LIB
 	select GENERIC_ALLOCATOR
-	---help---
+	help
 	  This is an iWARP/RDMA driver for the Chelsio T4 and T5
 	  1GbE, 10GbE adapters and T5 40GbE adapter.
 
diff --git a/drivers/infiniband/hw/hfi1/Kconfig b/drivers/infiniband/hw/hfi1/Kconfig
index 0653f4f7b26c..519866b30a13 100644
--- a/drivers/infiniband/hw/hfi1/Kconfig
+++ b/drivers/infiniband/hw/hfi1/Kconfig
@@ -5,19 +5,19 @@ config INFINIBAND_HFI1
 	select MMU_NOTIFIER
 	select CRC32
 	select I2C_ALGOBIT
-	---help---
+	help
 	This is a low-level driver for Intel OPA Gen1 adapter.
 config HFI1_DEBUG_SDMA_ORDER
 	bool "HFI1 SDMA Order debug"
 	depends on INFINIBAND_HFI1
 	default n
-	---help---
+	help
 	This is a debug flag to test for out of order
 	sdma completions for unit testing
 config SDMA_VERBOSITY
 	bool "Config SDMA Verbosity"
 	depends on INFINIBAND_HFI1
 	default n
-	---help---
+	help
 	This is a configuration flag to enable verbose
 	SDMA debug
diff --git a/drivers/infiniband/hw/hns/Kconfig b/drivers/infiniband/hw/hns/Kconfig
index 4921c1e40ccd..18d10ebf900b 100644
--- a/drivers/infiniband/hw/hns/Kconfig
+++ b/drivers/infiniband/hw/hns/Kconfig
@@ -4,7 +4,7 @@ config INFINIBAND_HNS
 	depends on NET_VENDOR_HISILICON
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
 	depends on (HNS_DSAF && HNS_ENET) || HNS3
-	---help---
+	help
 	  This is a RoCE/RDMA driver for the Hisilicon RoCE engine. The engine
 	  is used in Hisilicon Hip06 and more further ICT SoC based on
 	  platform device.
@@ -15,7 +15,7 @@ config INFINIBAND_HNS_HIP06
 	bool "Hisilicon Hip06 Family RoCE support"
 	depends on INFINIBAND_HNS && HNS && HNS_DSAF && HNS_ENET
 	depends on INFINIBAND_HNS=m || (HNS_DSAF=y && HNS_ENET=y)
-	---help---
+	help
 	  RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip06 and
 	  Hip07 SoC. These RoCE engines are platform devices.
 
@@ -26,7 +26,7 @@ config INFINIBAND_HNS_HIP08
 	bool "Hisilicon Hip08 Family RoCE support"
 	depends on INFINIBAND_HNS && PCI && HNS3
 	depends on INFINIBAND_HNS=m || HNS3=y
-	---help---
+	help
 	  RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip08 SoC.
 	  The RoCE engine is a PCI device.
 
diff --git a/drivers/infiniband/hw/i40iw/Kconfig b/drivers/infiniband/hw/i40iw/Kconfig
index e4b45f4cd8f8..7476f3b14c39 100644
--- a/drivers/infiniband/hw/i40iw/Kconfig
+++ b/drivers/infiniband/hw/i40iw/Kconfig
@@ -5,5 +5,5 @@ config INFINIBAND_I40IW
 	depends on IPV6 || !IPV6
 	depends on PCI
 	select GENERIC_ALLOCATOR
-	---help---
+	help
 	Intel(R) Ethernet X722 iWARP Driver
diff --git a/drivers/infiniband/hw/mlx4/Kconfig b/drivers/infiniband/hw/mlx4/Kconfig
index cc7c42fe6499..f30ce9dd080a 100644
--- a/drivers/infiniband/hw/mlx4/Kconfig
+++ b/drivers/infiniband/hw/mlx4/Kconfig
@@ -4,7 +4,7 @@ config MLX4_INFINIBAND
 	depends on NETDEVICES && ETHERNET && PCI && INET
 	select NET_VENDOR_MELLANOX
 	select MLX4_CORE
-	---help---
+	help
 	  This driver provides low-level InfiniBand support for
 	  Mellanox ConnectX PCI Express host channel adapters (HCAs).
 	  This is required to use InfiniBand protocols such as
diff --git a/drivers/infiniband/hw/mlx5/Kconfig b/drivers/infiniband/hw/mlx5/Kconfig
index ea248def4556..ef1ff42eaec5 100644
--- a/drivers/infiniband/hw/mlx5/Kconfig
+++ b/drivers/infiniband/hw/mlx5/Kconfig
@@ -2,7 +2,7 @@
 config MLX5_INFINIBAND
 	tristate "Mellanox 5th generation network adapters (ConnectX series) support"
 	depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
-	---help---
+	help
 	  This driver provides low-level InfiniBand support for
 	  Mellanox Connect-IB PCI Express host channel adapters (HCAs).
 	  This is required to use InfiniBand protocols such as
diff --git a/drivers/infiniband/hw/mthca/Kconfig b/drivers/infiniband/hw/mthca/Kconfig
index 66ff527f5928..faa7381f7d63 100644
--- a/drivers/infiniband/hw/mthca/Kconfig
+++ b/drivers/infiniband/hw/mthca/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_MTHCA
 	tristate "Mellanox HCA support"
 	depends on PCI
-	---help---
+	help
 	  This is a low-level driver for Mellanox InfiniHost host
 	  channel adapters (HCAs), including the MT23108 PCI-X HCA
 	  ("Tavor") and the MT25208 PCI Express HCA ("Arbel").
@@ -11,7 +11,7 @@ config INFINIBAND_MTHCA_DEBUG
 	bool "Verbose debugging output" if EXPERT
 	depends on INFINIBAND_MTHCA
 	default y
-	---help---
+	help
 	  This option causes debugging code to be compiled into the
 	  mthca driver.  The output can be turned on via the
 	  debug_level module parameter (which can also be set after
diff --git a/drivers/infiniband/hw/ocrdma/Kconfig b/drivers/infiniband/hw/ocrdma/Kconfig
index dd4ec388208c..54bd70bc4d1a 100644
--- a/drivers/infiniband/hw/ocrdma/Kconfig
+++ b/drivers/infiniband/hw/ocrdma/Kconfig
@@ -4,6 +4,6 @@ config INFINIBAND_OCRDMA
 	depends on ETHERNET && NETDEVICES && PCI && INET && (IPV6 || IPV6=n)
 	select NET_VENDOR_EMULEX
 	select BE2NET
-	---help---
+	help
 	  This driver provides low-level InfiniBand over Ethernet
 	  support for Emulex One Connect host channel adapters (HCAs).
diff --git a/drivers/infiniband/hw/qedr/Kconfig b/drivers/infiniband/hw/qedr/Kconfig
index 9c30325e1414..9e31d13b03c3 100644
--- a/drivers/infiniband/hw/qedr/Kconfig
+++ b/drivers/infiniband/hw/qedr/Kconfig
@@ -6,6 +6,6 @@ config INFINIBAND_QEDR
 	select QED_LL2
 	select QED_OOO
 	select QED_RDMA
-	---help---
+	help
 	  This driver provides low-level InfiniBand over Ethernet
 	  support for QLogic QED host channel adapters (HCAs).
diff --git a/drivers/infiniband/hw/qib/Kconfig b/drivers/infiniband/hw/qib/Kconfig
index 376d19f29346..6c4895777042 100644
--- a/drivers/infiniband/hw/qib/Kconfig
+++ b/drivers/infiniband/hw/qib/Kconfig
@@ -3,7 +3,7 @@ config INFINIBAND_QIB
 	tristate "Intel PCIe HCA support"
 	depends on 64BIT && INFINIBAND_RDMAVT
 	depends on PCI
-	---help---
+	help
 	This is a low-level driver for Intel PCIe QLE InfiniBand host
 	channel adapters.  This driver does not support the Intel
 	HyperTransport card (model QHT7140).
@@ -12,6 +12,6 @@ config INFINIBAND_QIB_DCA
 	bool "QIB DCA support"
 	depends on INFINIBAND_QIB && DCA && SMP && !(INFINIBAND_QIB=y && DCA=m)
 	default y
-	---help---
+	help
 	Setting this enables DCA support on some Intel chip sets
 	with the iba7322 HCA.
diff --git a/drivers/infiniband/hw/usnic/Kconfig b/drivers/infiniband/hw/usnic/Kconfig
index c0847d9e2539..9019599c173b 100644
--- a/drivers/infiniband/hw/usnic/Kconfig
+++ b/drivers/infiniband/hw/usnic/Kconfig
@@ -6,6 +6,6 @@ config INFINIBAND_USNIC
 	select ENIC
 	select NET_VENDOR_CISCO
 	select PCI_IOV
-	---help---
+	help
 	  This is a low-level driver for Cisco's Virtual Interface
 	  Cards (VICs), including the VIC 1240 and 1280 cards.
diff --git a/drivers/infiniband/hw/vmw_pvrdma/Kconfig b/drivers/infiniband/hw/vmw_pvrdma/Kconfig
index b99c9f0fc06a..a11e892e5e77 100644
--- a/drivers/infiniband/hw/vmw_pvrdma/Kconfig
+++ b/drivers/infiniband/hw/vmw_pvrdma/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_VMWARE_PVRDMA
 	tristate "VMware Paravirtualized RDMA Driver"
 	depends on NETDEVICES && ETHERNET && PCI && INET && VMXNET3
-	---help---
+	help
 	  This driver provides low-level support for VMware Paravirtual
 	  RDMA adapter. It interacts with the VMXNet3 driver to provide
 	  Ethernet capabilities.
diff --git a/drivers/infiniband/sw/rdmavt/Kconfig b/drivers/infiniband/sw/rdmavt/Kconfig
index 1f2759c72108..9ef5f5ce1ff6 100644
--- a/drivers/infiniband/sw/rdmavt/Kconfig
+++ b/drivers/infiniband/sw/rdmavt/Kconfig
@@ -4,5 +4,5 @@ config INFINIBAND_RDMAVT
 	depends on X86_64 && ARCH_DMA_ADDR_T_64BIT
 	depends on PCI
 	select DMA_VIRT_OPS
-	---help---
+	help
 	This is a common software verbs provider for RDMA networks.
diff --git a/drivers/infiniband/sw/rxe/Kconfig b/drivers/infiniband/sw/rxe/Kconfig
index d9bcfe740588..a0c6c7dfc181 100644
--- a/drivers/infiniband/sw/rxe/Kconfig
+++ b/drivers/infiniband/sw/rxe/Kconfig
@@ -6,7 +6,7 @@ config RDMA_RXE
 	select NET_UDP_TUNNEL
 	select CRYPTO_CRC32
 	select DMA_VIRT_OPS
-	---help---
+	help
 	This driver implements the InfiniBand RDMA transport over
 	the Linux network stack. It enables a system with a
 	standard Ethernet adapter to interoperate with a RoCE
diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
index 7af68604af77..254e31a90a66 100644
--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_IPOIB
 	tristate "IP-over-InfiniBand"
 	depends on NETDEVICES && INET && (IPV6 || IPV6=n)
-	---help---
+	help
 	  Support for the IP-over-InfiniBand protocol (IPoIB). This
 	  transports IP packets over InfiniBand so you can use your IB
 	  device as a fancy NIC.
@@ -13,7 +13,7 @@ config INFINIBAND_IPOIB_CM
 	bool "IP-over-InfiniBand Connected Mode support"
 	depends on INFINIBAND_IPOIB
 	default n
-	---help---
+	help
 	  This option enables support for IPoIB connected mode.  After
 	  enabling this option, you need to switch to connected mode
 	  through /sys/class/net/ibXXX/mode to actually create
@@ -28,7 +28,7 @@ config INFINIBAND_IPOIB_DEBUG
 	bool "IP-over-InfiniBand debugging" if EXPERT
 	depends on INFINIBAND_IPOIB
 	default y
-	---help---
+	help
 	  This option causes debugging code to be compiled into the
 	  IPoIB driver.  The output can be turned on via the
 	  debug_level and mcast_debug_level module parameters (which
@@ -42,7 +42,7 @@ config INFINIBAND_IPOIB_DEBUG
 config INFINIBAND_IPOIB_DEBUG_DATA
 	bool "IP-over-InfiniBand data path debugging"
 	depends on INFINIBAND_IPOIB_DEBUG
-	---help---
+	help
 	  This option compiles debugging code into the data path
 	  of the IPoIB driver.  The output can be turned on via the
 	  data_debug_level module parameter; however, even with output
diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
index 1d29dffeaff9..3016a0c9a9f0 100644
--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -3,7 +3,7 @@ config INFINIBAND_ISER
 	tristate "iSCSI Extensions for RDMA (iSER)"
 	depends on SCSI && INET && INFINIBAND_ADDR_TRANS
 	select SCSI_ISCSI_ATTRS
-	---help---
+	help
 	  Support for the iSCSI Extensions for RDMA (iSER) Protocol
 	  over InfiniBand. This allows you to access storage devices
 	  that speak iSCSI over iSER over InfiniBand.
diff --git a/drivers/infiniband/ulp/isert/Kconfig b/drivers/infiniband/ulp/isert/Kconfig
index 1a3f5ca8354c..798147adbef1 100644
--- a/drivers/infiniband/ulp/isert/Kconfig
+++ b/drivers/infiniband/ulp/isert/Kconfig
@@ -2,5 +2,5 @@
 config INFINIBAND_ISERT
 	tristate "iSCSI Extensions for RDMA (iSER) target support"
 	depends on INET && INFINIBAND_ADDR_TRANS && TARGET_CORE && ISCSI_TARGET
-	---help---
+	help
 	Support for iSCSI Extensions for RDMA (iSER) Target on Infiniband fabrics.
diff --git a/drivers/infiniband/ulp/opa_vnic/Kconfig b/drivers/infiniband/ulp/opa_vnic/Kconfig
index a1f266b9c0b2..e84248587187 100644
--- a/drivers/infiniband/ulp/opa_vnic/Kconfig
+++ b/drivers/infiniband/ulp/opa_vnic/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_OPA_VNIC
 	tristate "Intel OPA VNIC support"
 	depends on X86_64 && INFINIBAND
-	---help---
+	help
 	This is Omni-Path (OPA) Virtual Network Interface Controller (VNIC)
 	driver for Ethernet over Omni-Path feature. It implements the HW
 	independent VNIC functionality. It interfaces with Linux stack for
diff --git a/drivers/infiniband/ulp/srp/Kconfig b/drivers/infiniband/ulp/srp/Kconfig
index 6f5e7b3a3864..67cd63d1399c 100644
--- a/drivers/infiniband/ulp/srp/Kconfig
+++ b/drivers/infiniband/ulp/srp/Kconfig
@@ -3,7 +3,7 @@ config INFINIBAND_SRP
 	tristate "InfiniBand SCSI RDMA Protocol"
 	depends on SCSI && INFINIBAND_ADDR_TRANS
 	select SCSI_SRP_ATTRS
-	---help---
+	help
 	  Support for the SCSI RDMA Protocol over InfiniBand.  This
 	  allows you to access storage devices that speak SRP over
 	  InfiniBand.
diff --git a/drivers/infiniband/ulp/srpt/Kconfig b/drivers/infiniband/ulp/srpt/Kconfig
index ce7567cea9f6..4b5d9b792cfa 100644
--- a/drivers/infiniband/ulp/srpt/Kconfig
+++ b/drivers/infiniband/ulp/srpt/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_SRPT
 	tristate "InfiniBand SCSI RDMA Protocol target support"
 	depends on INFINIBAND && INFINIBAND_ADDR_TRANS && TARGET_CORE
-	---help---
+	help
 
 	  Support for the SCSI RDMA Protocol (SRP) Target driver. The
 	  SRP protocol is a protocol that allows an initiator to access