[media] drx-j: get rid of drxj_ctrl()

With this change, we finally got rid of all abstraction
layers on this driver.

This patch also fixes the LNA GPIO settings, as the original
code were using a wrong control name for it.

This patch exposes the several functions that aren't used.
Some of them are related to analog demod that might be
used some day, but others will likely never be needed, as
they don't fit on Linux media APIs.

Latter patches will clean up this mess.

Acked-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

1 files changed, 0 insertions, 55 deletions

diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
index b9ba48f88523..daa9027983e8 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
+++ b/drivers/media/dvb-frontends/drx39xyj/drx_driver.h
@@ -782,61 +782,6 @@ enum drx_pilot_mode {
 	DRX_PILOT_AUTO = DRX_AUTO /**< Autodetect Pilot     */
 };
 
-#define DRX_CTRL_BASE          ((u32)0)
-
-#define DRX_CTRL_NOP             (DRX_CTRL_BASE +  0)/**< No Operation       */
-#define DRX_CTRL_PROBE_DEVICE    (DRX_CTRL_BASE +  1)/**< Probe device       */
-
-#define DRX_CTRL_LOAD_UCODE      (DRX_CTRL_BASE +  2)/**< Load microcode     */
-#define DRX_CTRL_VERIFY_UCODE    (DRX_CTRL_BASE +  3)/**< Verify microcode   */
-#define DRX_CTRL_SET_CHANNEL     (DRX_CTRL_BASE +  4)/**< Set channel        */
-#define DRX_CTRL_GET_CHANNEL     (DRX_CTRL_BASE +  5)/**< Get channel        */
-#define DRX_CTRL_LOCK_STATUS     (DRX_CTRL_BASE +  6)/**< Get lock status    */
-#define DRX_CTRL_SIG_QUALITY     (DRX_CTRL_BASE +  7)/**< Get signal quality */
-#define DRX_CTRL_SIG_STRENGTH    (DRX_CTRL_BASE +  8)/**< Get signal strength*/
-#define DRX_CTRL_RF_POWER        (DRX_CTRL_BASE +  9)/**< Get RF power       */
-#define DRX_CTRL_CONSTEL         (DRX_CTRL_BASE + 10)/**< Get constel point  */
-#define DRX_CTRL_SCAN_INIT       (DRX_CTRL_BASE + 11)/**< Initialize scan    */
-#define DRX_CTRL_SCAN_NEXT       (DRX_CTRL_BASE + 12)/**< Scan for next      */
-#define DRX_CTRL_SCAN_STOP       (DRX_CTRL_BASE + 13)/**< Stop scan          */
-#define DRX_CTRL_TPS_INFO        (DRX_CTRL_BASE + 14)/**< Get TPS info       */
-#define DRX_CTRL_SET_CFG         (DRX_CTRL_BASE + 15)/**< Set configuration  */
-#define DRX_CTRL_GET_CFG         (DRX_CTRL_BASE + 16)/**< Get configuration  */
-#define DRX_CTRL_VERSION         (DRX_CTRL_BASE + 17)/**< Get version info   */
-#define DRX_CTRL_I2C_BRIDGE      (DRX_CTRL_BASE + 18)/**< Open/close  bridge */
-#define DRX_CTRL_SET_STANDARD    (DRX_CTRL_BASE + 19)/**< Set demod std      */
-#define DRX_CTRL_GET_STANDARD    (DRX_CTRL_BASE + 20)/**< Get demod std      */
-#define DRX_CTRL_SET_OOB         (DRX_CTRL_BASE + 21)/**< Set OOB param      */
-#define DRX_CTRL_GET_OOB         (DRX_CTRL_BASE + 22)/**< Get OOB param      */
-#define DRX_CTRL_AUD_SET_STANDARD (DRX_CTRL_BASE + 23)/**< Set audio param    */
-#define DRX_CTRL_AUD_GET_STANDARD (DRX_CTRL_BASE + 24)/**< Get audio param    */
-#define DRX_CTRL_AUD_GET_STATUS  (DRX_CTRL_BASE + 25)/**< Read RDS           */
-#define DRX_CTRL_AUD_BEEP        (DRX_CTRL_BASE + 26)/**< Read RDS           */
-#define DRX_CTRL_I2C_READWRITE   (DRX_CTRL_BASE + 27)/**< Read/write I2C     */
-#define DRX_CTRL_PROGRAM_TUNER   (DRX_CTRL_BASE + 28)/**< Program tuner      */
-
-	/* Professional */
-#define DRX_CTRL_MB_CFG          (DRX_CTRL_BASE + 29) /**<                   */
-#define DRX_CTRL_MB_READ         (DRX_CTRL_BASE + 30) /**<                   */
-#define DRX_CTRL_MB_WRITE        (DRX_CTRL_BASE + 31) /**<                   */
-#define DRX_CTRL_MB_CONSTEL      (DRX_CTRL_BASE + 32) /**<                   */
-#define DRX_CTRL_MB_MER          (DRX_CTRL_BASE + 33) /**<                   */
-
-	/* Misc */
-#define DRX_CTRL_UIO_CFG         DRX_CTRL_SET_UIO_CFG  /**< Configure UIO     */
-#define DRX_CTRL_SET_UIO_CFG     (DRX_CTRL_BASE + 34) /**< Configure UIO     */
-#define DRX_CTRL_GET_UIO_CFG     (DRX_CTRL_BASE + 35) /**< Configure UIO     */
-#define DRX_CTRL_UIO_READ        (DRX_CTRL_BASE + 36) /**< Read from UIO     */
-#define DRX_CTRL_UIO_WRITE       (DRX_CTRL_BASE + 37) /**< Write to UIO      */
-#define DRX_CTRL_READ_EVENTS     (DRX_CTRL_BASE + 38) /**< Read events       */
-#define DRX_CTRL_HDL_EVENTS      (DRX_CTRL_BASE + 39) /**< Handle events     */
-#define DRX_CTRL_POWER_MODE      (DRX_CTRL_BASE + 40) /**< Set power mode    */
-#define DRX_CTRL_LOAD_FILTER     (DRX_CTRL_BASE + 41) /**< Load chan. filter */
-#define DRX_CTRL_VALIDATE_UCODE  (DRX_CTRL_BASE + 42) /**< Validate ucode    */
-#define DRX_CTRL_DUMP_REGISTERS  (DRX_CTRL_BASE + 43) /**< Dump registers    */
-
-#define DRX_CTRL_MAX             (DRX_CTRL_BASE + 44)	/* never to be used    */
-
 /**
  * enum drxu_code_action - indicate if firmware has to be uploaded or verified.
  * @UCODE_UPLOAD:	Upload the microcode image to device