summaryrefslogtreecommitdiff
path: root/drivers/media/i2c
diff options
context:
space:
mode:
authorJacob Chen <jacob-chen@iotwrt.com>2017-10-01 12:22:37 +0200
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>2017-10-27 16:12:49 +0200
commit7bc9f038d02c2fc14e53e4aaca651deaf6d0de3f (patch)
tree5fa566a5f3dd39ba55209501763eea500d8f926b /drivers/media/i2c
parent71862f63f351078560a7ce35c6c2e2ca16750374 (diff)
media: i2c: OV5647: ensure clock lane in LP-11 state before streaming on
When I was supporting Rpi Camera Module on the ASUS Tinker board, I found this driver have some issues with rockchip's mipi-csi driver. It didn't place clock lane in LP-11 state before performing D-PHY initialisation. >From our experience, on some OV sensors, LP-11 state is not achieved while BIT(5)-0x4800 is cleared. So let's set BIT(5) and BIT(0) both while not streaming, in order to coax the clock lane into LP-11 state. 0x4800 : MIPI CTRL 00 BIT(5) : clock lane gate enable 0: continuous 1: none-continuous BIT(0) : manually set clock lane 0: Not used 1: used Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Reviewed-by: Luis Oliveira <lolivei@synopsys.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Diffstat (limited to 'drivers/media/i2c')
-rw-r--r--drivers/media/i2c/ov5647.c13
1 files changed, 12 insertions, 1 deletions
diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index 95ce90fdb876..247302d01f53 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -253,6 +253,10 @@ static int ov5647_stream_on(struct v4l2_subdev *sd)
{
int ret;
+ ret = ov5647_write(sd, 0x4800, 0x04);
+ if (ret < 0)
+ return ret;
+
ret = ov5647_write(sd, 0x4202, 0x00);
if (ret < 0)
return ret;
@@ -264,6 +268,10 @@ static int ov5647_stream_off(struct v4l2_subdev *sd)
{
int ret;
+ ret = ov5647_write(sd, 0x4800, 0x25);
+ if (ret < 0)
+ return ret;
+
ret = ov5647_write(sd, 0x4202, 0x0f);
if (ret < 0)
return ret;
@@ -320,7 +328,10 @@ static int __sensor_init(struct v4l2_subdev *sd)
return ret;
}
- return ov5647_write(sd, 0x4800, 0x04);
+ /*
+ * stream off to make the clock lane into LP-11 state.
+ */
+ return ov5647_stream_off(sd);
}
static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)