Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "This series include:
   - a new Remote Controller driver for ST SoC with the corresponding DT
     bindings
   - a new frontend (cx24117)
   - a new I2C camera flash driver (lm3560)
   - a new mem2mem driver for TI SoC (ti-vpe)
   - support for Raphael r828d added to r820t driver
   - some improvements on buffer allocation at VB2 core
   - usual driver fixes and improvements

  PS this time, we have a smaller number of patches.  While it is hard
  to pinpoint to the reasons, I believe that it is mainly due to:

   1) there are several patch series ready, but depending on DT review.
      I decided to grant some extra time for DT maintainers to look on
      it, as they're expecting to have more time with the changes agreed
      during ARM mini-summit and KS.  If they can't review in time for
      3.14, I'll review myself and apply for the next merge window.

   2) I suspect that having both LinuxCon EU and LinuxCon NA happening
      during the same merge window affected the development
      productivity, as several core media developers participated on
      both events"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (151 commits)
  [media] media: st-rc: Add ST remote control driver
  [media] gpio-ir-recv: Include linux/of.h header
  [media] tvp7002: Include linux/of.h header
  [media] tvp514x: Include linux/of.h header
  [media] ths8200: Include linux/of.h header
  [media] adv7343: Include linux/of.h header
  [media] v4l: Fix typo in v4l2_subdev_get_try_crop()
  [media] media: i2c: add driver for dual LED Flash, lm3560
  [media] rtl28xxu: add 15f4:0131 Astrometa DVB-T2
  [media] rtl28xxu: add RTL2832P + R828D support
  [media] rtl2832: add new tuner R828D
  [media] r820t: add support for R828D
  [media] media/i2c: ths8200: fix build failure with gcc 4.5.4
  [media] Add support for KWorld UB435-Q V2
  [media] staging/media: fix msi3101 build errors
  [media] ddbridge: Remove casting the return value which is a void pointer
  [media] ngene: Remove casting the return value which is a void pointer
  [media] dm1105: remove unneeded not-null test
  [media] sh_mobile_ceu_camera: remove deprecated IRQF_DISABLED
  [media] media: rcar_vin: Add preliminary r8a7790 support
  ...

1 files changed, 31 insertions, 12 deletions

diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c
index 03761c6f472f..05bd91a60c09 100644
--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -209,8 +209,10 @@ static int smsusb_sendrequest(void *context, void *buffer, size_t size)
 	struct sms_msg_hdr *phdr = (struct sms_msg_hdr *) buffer;
 	int dummy;
 
-	if (dev->state != SMSUSB_ACTIVE)
+	if (dev->state != SMSUSB_ACTIVE) {
+		sms_debug("Device not active yet");
 		return -ENOENT;
+	}
 
 	sms_debug("sending %s(%d) size: %d",
 		  smscore_translate_msg(phdr->msg_type), phdr->msg_type,
@@ -243,6 +245,9 @@ static int smsusb1_load_firmware(struct usb_device *udev, int id, int board_id)
 	int rc, dummy;
 	char *fw_filename;
 
+	if (id < 0)
+		id = sms_get_board(board_id)->default_mode;
+
 	if (id < DEVICE_MODE_DVBT || id > DEVICE_MODE_DVBT_BDA) {
 		sms_err("invalid firmware id specified %d", id);
 		return -EINVAL;
@@ -445,14 +450,15 @@ static int smsusb_probe(struct usb_interface *intf,
 	char devpath[32];
 	int i, rc;
 
-	sms_info("interface number %d",
+	sms_info("board id=%lu, interface number %d",
+		 id->driver_info,
 		 intf->cur_altsetting->desc.bInterfaceNumber);
 
 	if (sms_get_board(id->driver_info)->intf_num !=
 	    intf->cur_altsetting->desc.bInterfaceNumber) {
-		sms_err("interface number is %d expecting %d",
-			sms_get_board(id->driver_info)->intf_num,
-			intf->cur_altsetting->desc.bInterfaceNumber);
+		sms_debug("interface %d won't be used. Expecting interface %d to popup",
+			intf->cur_altsetting->desc.bInterfaceNumber,
+			sms_get_board(id->driver_info)->intf_num);
 		return -ENODEV;
 	}
 
@@ -483,22 +489,32 @@ static int smsusb_probe(struct usb_interface *intf,
 	}
 	if ((udev->actconfig->desc.bNumInterfaces == 2) &&
 	    (intf->cur_altsetting->desc.bInterfaceNumber == 0)) {
-		sms_err("rom interface 0 is not used");
+		sms_debug("rom interface 0 is not used");
 		return -ENODEV;
 	}
 
 	if (id->driver_info == SMS1XXX_BOARD_SIANO_STELLAR_ROM) {
-		sms_info("stellar device was found.");
+		/* Detected a Siano Stellar uninitialized */
+
 		snprintf(devpath, sizeof(devpath), "usb\\%d-%s",
 			 udev->bus->busnum, udev->devpath);
-		sms_info("stellar device was found.");
-		return smsusb1_load_firmware(
+		sms_info("stellar device in cold state was found at %s.", devpath);
+		rc = smsusb1_load_firmware(
 				udev, smscore_registry_getmode(devpath),
 				id->driver_info);
+
+		/* This device will reset and gain another USB ID */
+		if (!rc)
+			sms_info("stellar device now in warm state");
+		else
+			sms_err("Failed to put stellar in warm state. Error: %d", rc);
+
+		return rc;
+	} else {
+		rc = smsusb_init_device(intf, id->driver_info);
 	}
 
-	rc = smsusb_init_device(intf, id->driver_info);
-	sms_info("rc %d", rc);
+	sms_info("Device initialized with return code %d", rc);
 	sms_board_load_modules(id->driver_info);
 	return rc;
 }
@@ -550,10 +566,13 @@ static int smsusb_resume(struct usb_interface *intf)
 }
 
 static const struct usb_device_id smsusb_id_table[] = {
+	/* This device is only present before firmware load */
 	{ USB_DEVICE(0x187f, 0x0010),
-		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
+		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR_ROM },
+	/* This device pops up after firmware load */
 	{ USB_DEVICE(0x187f, 0x0100),
 		.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
+
 	{ USB_DEVICE(0x187f, 0x0200),
 		.driver_info = SMS1XXX_BOARD_SIANO_NOVA_A },
 	{ USB_DEVICE(0x187f, 0x0201),