Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - V4L2 API additions to better support JPEG compression control
 - media API additions to properly support MPEG decoders
 - V4L2 API additions for image crop/scaling
 - a few other V4L2 API DocBook fixes/improvements
 - two new DVB frontend drivers: m88rs2000 and rtl2830
 - two new DVB drivers: az6007 and rtl28xxu
 - a framework for ISA drivers, that removed lots of common code found
   at the ISA radio drivers
 - a new FM transmitter driver (radio-keene)
 - a GPIO-based IR receiver driver
 - a new sensor driver: mt9m032
 - some new video drivers: adv7183, blackfin, mx2_emmaprp, sii9234_drv,
   vs6624
 - several new board additions, driver fixes, improvements and cleanups.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (295 commits)
  [media] update CARDLIST.em28xx
  [media] partially reverts changeset fa5527c
  [media] stb0899: fix the limits for signal strength values
  [media] em28xx: support for 2304:0242 PCTV QuatroStick (510e)
  [media] em28xx: support for 2013:0251 PCTV QuatroStick nano (520e)
  [media] -EINVAL -> -ENOTTY
  [media] gspca - sn9c20x: Cleanup source
  [media] gspca - sn9c20x: Simplify register write for capture start/stop
  [media] gspca - sn9c20x: Add automatic JPEG compression mechanism
  [media] gspca - sn9c20x: Greater delay in case of sensor no response
  [media] gspca - sn9c20x: Optimize the code of write sequences
  [media] gspca - sn9c20x: Add the JPEG compression quality control
  [media] gspca - sn9c20x: Add a delay after Omnivision sensor reset
  [media] gspca - sn9c20x: Propagate USB errors to higher level
  [media] gspca - sn9c20x: Use the new video control mechanism
  [media] gspca - sn9c20x: Fix loss of frame start
  [media] gspca - zc3xx: Lack of register 08 value for sensor cs2102k
  [media] gspca - ov534_9: Add brightness to OmniVision 5621 sensor
  [media] gspca - zc3xx: Add V4L2_CID_JPEG_COMPRESSION_QUALITY control support
  [media] pvrusb2: fix 7MHz & 8MHz DVB-T tuner support for HVR1900 rev D1F5
  ...

1 files changed, 63 insertions, 0 deletions

diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 22ecd7297d2d..48d2878699b7 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -210,6 +210,54 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, u32 *ir_key,
 	return 1;
 }
 
+/* copied and modified from get_key_msi_tvanywhere_plus() */
+static int get_key_kworld_pc150u(struct IR_i2c *ir, u32 *ir_key,
+					u32 *ir_raw)
+{
+	unsigned char b;
+	unsigned int gpio;
+
+	/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
+	struct saa7134_dev *dev = ir->c->adapter->algo_data;
+	if (dev == NULL) {
+		i2cdprintk("get_key_kworld_pc150u: "
+			   "ir->c->adapter->algo_data is NULL!\n");
+		return -EIO;
+	}
+
+	/* rising SAA7134_GPIO_GPRESCAN reads the status */
+
+	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
+
+	gpio = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2);
+
+	/* GPIO&0x100 is pulsed low when a button is pressed. Don't do
+	   I2C receive if gpio&0x100 is not low. */
+
+	if (gpio & 0x100)
+		return 0;       /* No button press */
+
+	/* GPIO says there is a button press. Get it. */
+
+	if (1 != i2c_master_recv(ir->c, &b, 1)) {
+		i2cdprintk("read error\n");
+		return -EIO;
+	}
+
+	/* No button press */
+
+	if (b == 0xff)
+		return 0;
+
+	/* Button pressed */
+
+	dprintk("get_key_kworld_pc150u: Key = 0x%02X\n", b);
+	*ir_key = b;
+	*ir_raw = b;
+	return 1;
+}
+
 static int get_key_purpletv(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 {
 	unsigned char b;
@@ -901,6 +949,21 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 			msg_msi.addr, dev->i2c_adap.name,
 			(1 == rc) ? "yes" : "no");
 		break;
+	case SAA7134_BOARD_KWORLD_PC150U:
+		/* copied and modified from MSI TV@nywhere Plus */
+		dev->init_data.name = "Kworld PC150-U";
+		dev->init_data.get_key = get_key_kworld_pc150u;
+		dev->init_data.ir_codes = RC_MAP_KWORLD_PC150U;
+		info.addr = 0x30;
+		/* MSI TV@nywhere Plus controller doesn't seem to
+		   respond to probes unless we read something from
+		   an existing device. Weird...
+		   REVISIT: might no longer be needed */
+		rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
+		dprintk("probe 0x%02x @ %s: %s\n",
+			msg_msi.addr, dev->i2c_adap.name,
+			(1 == rc) ? "yes" : "no");
+		break;
 	case SAA7134_BOARD_HAUPPAUGE_HVR1110:
 		dev->init_data.name = "HVR 1110";
 		dev->init_data.get_key = get_key_hvr1110;