summaryrefslogtreecommitdiff
path: root/drivers/media
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@kernel.org>2022-03-14 11:01:05 +0100
committerMauro Carvalho Chehab <mchehab@kernel.org>2022-03-18 05:58:35 +0100
commit6cdc31b2d7095af3d39f001b0d4e367a6f32664e (patch)
treed00cd220b6aed3328d5fd07c41e7c9ee9e26b3ae /drivers/media
parent9958d30f38b96fb763a10d44d18ddad39127d5f4 (diff)
media: media/*/Kconfig: sort entries
Currently, the idems inside media Kconfig are out of order. Sort them using the script below: <script> use strict; use warnings; my %config; my @source; my $out; sub flush_config() { if (scalar %config) { for my $c (sort keys %config) { $out .= $config{$c} . "\n"; } %config = (); } return if (!scalar @source); $out .= "\n"; for my $s (sort @source) { $out .= $s; } $out .= "\n"; @source = (); } sub sort_kconfig($) { my $fname = shift; my $cur_config = ""; @source = (); $out = ""; %config = (); open IN, $fname or die; while (<IN>) { if (m/^config\s+(.*)/) { $cur_config = $1; $config{$cur_config} .= $_; } elsif (m/^source\s+(.*)/) { push @source, $_; } elsif (m/^\s+/) { if ($cur_config eq "") { $out .= $_; } else { $config{$cur_config} .= $_; } } else { flush_config(); $cur_config = ""; $out .= $_; } } close IN or die; flush_config(); $out =~ s/\n\n+/\n\n/g; $out =~ s/\n+$/\n/; open OUT, ">$fname"; print OUT $out; close OUT; } for my $fname(@ARGV) { sort_kconfig $fname } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Diffstat (limited to 'drivers/media')
-rw-r--r--drivers/media/common/Kconfig16
-rw-r--r--drivers/media/dvb-frontends/Kconfig645
-rw-r--r--drivers/media/i2c/Kconfig622
-rw-r--r--drivers/media/mmc/Kconfig1
-rw-r--r--drivers/media/pci/Kconfig29
-rw-r--r--drivers/media/radio/Kconfig320
-rw-r--r--drivers/media/rc/Kconfig376
-rw-r--r--drivers/media/test-drivers/Kconfig6
-rw-r--r--drivers/media/test-drivers/vidtv/Kconfig1
-rw-r--r--drivers/media/tuners/Kconfig239
-rw-r--r--drivers/media/usb/Kconfig33
-rw-r--r--drivers/media/usb/dvb-usb-v2/Kconfig26
-rw-r--r--drivers/media/usb/dvb-usb/Kconfig364
-rw-r--r--drivers/media/usb/gspca/Kconfig27
14 files changed, 1367 insertions, 1338 deletions
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 0f6bde0f793e..a2ae71270054 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -6,23 +6,23 @@ config MEDIA_COMMON_OPTIONS
comment "common driver options"
depends on MEDIA_COMMON_OPTIONS
-config VIDEO_CX2341X
- tristate
-
-config VIDEO_TVEEPROM
+config CYPRESS_FIRMWARE
tristate
- depends on I2C
+ depends on USB
config TTPCI_EEPROM
tristate
depends on I2C
-config CYPRESS_FIRMWARE
+config VIDEO_CX2341X
tristate
- depends on USB
-source "drivers/media/common/videobuf2/Kconfig"
+config VIDEO_TVEEPROM
+ tristate
+ depends on I2C
+
source "drivers/media/common/b2c2/Kconfig"
source "drivers/media/common/saa7146/Kconfig"
source "drivers/media/common/siano/Kconfig"
source "drivers/media/common/v4l2-tpg/Kconfig"
+source "drivers/media/common/videobuf2/Kconfig"
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index 4101f9b1e731..2ef2ff2a38ff 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -11,6 +11,23 @@ menu "Customise DVB Frontends"
comment "Multistandard (satellite) frontends"
depends on DVB_CORE
+config DVB_M88DS3103
+ tristate "Montage Technology M88DS3103"
+ depends on DVB_CORE && I2C && I2C_MUX
+ select REGMAP_I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y when you want to support this frontend.
+
+config DVB_MXL5XX
+ tristate "MaxLinear MxL5xx based tuner-demodulators"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ MaxLinear MxL5xx family of DVB-S/S2 tuners/demodulators.
+
+ Say Y when you want to support these frontends.
+
config DVB_STB0899
tristate "STB0899 based"
depends on DVB_CORE && I2C
@@ -60,23 +77,6 @@ config DVB_STV6111
Say Y when you want to support these frontends.
-config DVB_MXL5XX
- tristate "MaxLinear MxL5xx based tuner-demodulators"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- MaxLinear MxL5xx family of DVB-S/S2 tuners/demodulators.
-
- Say Y when you want to support these frontends.
-
-config DVB_M88DS3103
- tristate "Montage Technology M88DS3103"
- depends on DVB_CORE && I2C && I2C_MUX
- select REGMAP_I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y when you want to support this frontend.
-
comment "Multistandard (cable + terrestrial) frontends"
depends on DVB_CORE
@@ -89,40 +89,40 @@ config DVB_DRXK
Say Y when you want to support this frontend.
-config DVB_TDA18271C2DD
- tristate "NXP TDA18271C2 silicon tuner"
+config DVB_MN88472
+ tristate "Panasonic MN88472"
depends on DVB_CORE && I2C
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- NXP TDA18271 silicon tuner.
-
- Say Y when you want to support this tuner.
+ Say Y when you want to support this frontend.
-config DVB_SI2165
- tristate "Silicon Labs si2165 based"
+config DVB_MN88473
+ tristate "Panasonic MN88473"
depends on DVB_CORE && I2C
select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-C/T demodulator.
-
Say Y when you want to support this frontend.
-config DVB_MN88472
- tristate "Panasonic MN88472"
+config DVB_SI2165
+ tristate "Silicon Labs si2165 based"
depends on DVB_CORE && I2C
select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
+ A DVB-C/T demodulator.
+
Say Y when you want to support this frontend.
-config DVB_MN88473
- tristate "Panasonic MN88473"
+config DVB_TDA18271C2DD
+ tristate "NXP TDA18271C2 silicon tuner"
depends on DVB_CORE && I2C
- select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y when you want to support this frontend.
+ NXP TDA18271 silicon tuner.
+
+ Say Y when you want to support this tuner.
comment "DVB-S (satellite) frontends"
depends on DVB_CORE
@@ -134,6 +134,27 @@ config DVB_CX24110
help
A DVB-S tuner module. Say Y when you want to support this frontend.
+config DVB_CX24116
+ tristate "Conexant CX24116 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
+config DVB_CX24117
+ tristate "Conexant CX24117 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A Dual DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
+config DVB_CX24120
+ tristate "Conexant CX24120 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
config DVB_CX24123
tristate "Conexant CX24123 based"
depends on DVB_CORE && I2C
@@ -141,22 +162,23 @@ config DVB_CX24123
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_MT312
- tristate "Zarlink VP310/MT312/ZL10313 based"
+config DVB_DS3000
+ tristate "Montage Tehnology DS3000 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S tuner module. Say Y when you want to support this frontend.
+ A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
-config DVB_ZL10036
- tristate "Zarlink ZL10036 silicon tuner"
+config DVB_MB86A16
+ tristate "Fujitsu MB86A16 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S tuner module. Say Y when you want to support this frontend.
+ A DVB-S/DSS Direct Conversion reveiver.
+ Say Y when you want to support this frontend.
-config DVB_ZL10039
- tristate "Zarlink ZL10039 silicon tuner"
+config DVB_MT312
+ tristate "Zarlink VP310/MT312/ZL10313 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
@@ -169,8 +191,8 @@ config DVB_S5H1420
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_STV0288
- tristate "ST STV0288 based"
+config DVB_SI21XX
+ tristate "Silicon Labs SI21XX based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
@@ -183,19 +205,19 @@ config DVB_STB6000
help
A DVB-S silicon tuner module. Say Y when you want to support this tuner.
-config DVB_STV0299
- tristate "ST STV0299 based"
+config DVB_STV0288
+ tristate "ST STV0288 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_STV6110
- tristate "ST STV6110 silicon tuner"
+config DVB_STV0299
+ tristate "ST STV0299 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S silicon tuner module. Say Y when you want to support this tuner.
+ A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_STV0900
tristate "ST STV0900 based"
@@ -204,49 +226,42 @@ config DVB_STV0900
help
A DVB-S/S2 demodulator. Say Y when you want to support this frontend.
-config DVB_TDA8083
- tristate "Philips TDA8083 based"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-S tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA10086
- tristate "Philips TDA10086 based"
+config DVB_STV6110
+ tristate "ST STV6110 silicon tuner"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S tuner module. Say Y when you want to support this frontend.
+ A DVB-S silicon tuner module. Say Y when you want to support this tuner.
-config DVB_TDA8261
- tristate "Philips TDA8261 based"
+config DVB_TDA10071
+ tristate "NXP TDA10071"
depends on DVB_CORE && I2C
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S tuner module. Say Y when you want to support this frontend.
+ Say Y when you want to support this frontend.
-config DVB_VES1X93
- tristate "VLSI VES1893 or VES1993 based"
+config DVB_TDA10086
+ tristate "Philips TDA10086 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_TUNER_ITD1000
- tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
+config DVB_TDA8083
+ tristate "Philips TDA8083 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_TUNER_CX24113
- tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
+config DVB_TDA8261
+ tristate "Philips TDA8261 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-
config DVB_TDA826X
tristate "Philips TDA826X silicon tuner"
depends on DVB_CORE && I2C
@@ -254,86 +269,71 @@ config DVB_TDA826X
help
A DVB-S silicon tuner module. Say Y when you want to support this tuner.
-config DVB_TUA6100
- tristate "Infineon TUA6100 PLL"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-S PLL chip.
-
-config DVB_CX24116
- tristate "Conexant CX24116 based"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
-
-config DVB_CX24117
- tristate "Conexant CX24117 based"
+config DVB_TS2020
+ tristate "Montage Tehnology TS2020 based tuners"
depends on DVB_CORE && I2C
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A Dual DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+ A DVB-S/S2 silicon tuner. Say Y when you want to support this tuner.
-config DVB_CX24120
- tristate "Conexant CX24120 based"
+config DVB_TUA6100
+ tristate "Infineon TUA6100 PLL"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+ A DVB-S PLL chip.
-config DVB_SI21XX
- tristate "Silicon Labs SI21XX based"
+config DVB_TUNER_CX24113
+ tristate "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_TS2020
- tristate "Montage Tehnology TS2020 based tuners"
+config DVB_TUNER_ITD1000
+ tristate "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
depends on DVB_CORE && I2C
- select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S/S2 silicon tuner. Say Y when you want to support this tuner.
+ A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_DS3000
- tristate "Montage Tehnology DS3000 based"
+config DVB_VES1X93
+ tristate "VLSI VES1893 or VES1993 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+ A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_MB86A16
- tristate "Fujitsu MB86A16 based"
+config DVB_ZL10036
+ tristate "Zarlink ZL10036 silicon tuner"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S/DSS Direct Conversion reveiver.
- Say Y when you want to support this frontend.
+ A DVB-S tuner module. Say Y when you want to support this frontend.
-config DVB_TDA10071
- tristate "NXP TDA10071"
+config DVB_ZL10039
+ tristate "Zarlink ZL10039 silicon tuner"
depends on DVB_CORE && I2C
- select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y when you want to support this frontend.
+ A DVB-S tuner module. Say Y when you want to support this frontend.
comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
-config DVB_SP887X
- tristate "Spase sp887x based"
- depends on DVB_CORE && I2C
+config DVB_AF9013
+ tristate "Afatech AF9013 demodulator"
+ depends on DVB_CORE && I2C && I2C_MUX
+ select REGMAP
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-T tuner module. Say Y when you want to support this frontend.
+ Say Y when you want to support this frontend.
- This driver needs external firmware. Please use the command
- "<kerneldir>/scripts/get_dvb_firmware sp887x" to
- download/extract it, and then copy it to /usr/lib/hotplug/firmware
- or /lib/firmware (depending on configuration of firmware hotplug).
+config DVB_AS102_FE
+ tristate
+ depends on DVB_CORE
+ default DVB_AS102
config DVB_CX22700
tristate "Conexant CX22700 based"
@@ -349,64 +349,20 @@ config DVB_CX22702
help
A DVB-T tuner module. Say Y when you want to support this frontend.
-config DVB_S5H1432
- tristate "Samsung s5h1432 demodulator (OFDM)"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_DRXD
- tristate "Micronas DRXD driver"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-T tuner module. Say Y when you want to support this frontend.
-
- Note: this driver was based on vendor driver reference code (released
- under the GPL) as opposed to the existing drx397xd driver, which
- was written via reverse engineering.
-
-config DVB_L64781
- tristate "LSI L64781"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_TDA1004X
- tristate "Philips TDA10045H/TDA10046H based"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-T tuner module. Say Y when you want to support this frontend.
-
- This driver needs external firmware. Please use the commands
- "<kerneldir>/scripts/get_dvb_firmware tda10045",
- "<kerneldir>/scripts/get_dvb_firmware tda10046" to
- download/extract them, and then copy them to /usr/lib/hotplug/firmware
- or /lib/firmware (depending on configuration of firmware hotplug).
-
-config DVB_NXT6000
- tristate "NxtWave Communications NXT6000 based"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A DVB-T tuner module. Say Y when you want to support this frontend.
-
-config DVB_MT352
- tristate "Zarlink MT352 based"
+config DVB_CXD2820R
+ tristate "Sony CXD2820R"
depends on DVB_CORE && I2C
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-T tuner module. Say Y when you want to support this frontend.
+ Say Y when you want to support this frontend.
-config DVB_ZL10353
- tristate "Zarlink ZL10353 based"
+config DVB_CXD2841ER
+ tristate "Sony CXD2841ER"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-T tuner module. Say Y when you want to support this frontend.
+ Say Y when you want to support this frontend.
config DVB_DIB3000MB
tristate "DiBcom 3000M-B"
@@ -448,20 +404,16 @@ config DVB_DIB9000
A DVB-T tuner module. Designed for mobile usage. Say Y when you want
to support this frontend.
-config DVB_TDA10048
- tristate "Philips TDA10048HN based"
+config DVB_DRXD
+ tristate "Micronas DRXD driver"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
A DVB-T tuner module. Say Y when you want to support this frontend.
-config DVB_AF9013
- tristate "Afatech AF9013 demodulator"
- depends on DVB_CORE && I2C && I2C_MUX
- select REGMAP
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y when you want to support this frontend.
+ Note: this driver was based on vendor driver reference code (released
+ under the GPL) as opposed to the existing drx397xd driver, which
+ was written via reverse engineering.
config DVB_EC100
tristate "E3C EC100"
@@ -470,27 +422,31 @@ config DVB_EC100
help
Say Y when you want to support this frontend.
-config DVB_STV0367
- tristate "ST STV0367 based"
+config DVB_GP8PSK_FE
+ tristate
+ depends on DVB_CORE
+ default DVB_USB_GP8PSK
+
+config DVB_L64781
+ tristate "LSI L64781"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-T/C tuner module. Say Y when you want to support this frontend.
+ A DVB-T tuner module. Say Y when you want to support this frontend.
-config DVB_CXD2820R
- tristate "Sony CXD2820R"
+config DVB_MT352
+ tristate "Zarlink MT352 based"
depends on DVB_CORE && I2C
- select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y when you want to support this frontend.
+ A DVB-T tuner module. Say Y when you want to support this frontend.
-config DVB_CXD2841ER
- tristate "Sony CXD2841ER"
+config DVB_NXT6000
+ tristate "NxtWave Communications NXT6000 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y when you want to support this frontend.
+ A DVB-T tuner module. Say Y when you want to support this frontend.
config DVB_RTL2830
tristate "Realtek RTL2830 DVB-T"
@@ -517,6 +473,13 @@ config DVB_RTL2832_SDR
help
Say Y when you want to support this SDR module.
+config DVB_S5H1432
+ tristate "Samsung s5h1432 demodulator (OFDM)"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
+
config DVB_SI2168
tristate "Silicon Labs Si2168"
depends on DVB_CORE && I2C && I2C_MUX
@@ -524,10 +487,44 @@ config DVB_SI2168
help
Say Y when you want to support this frontend.
-config DVB_AS102_FE
- tristate
- depends on DVB_CORE
- default DVB_AS102
+config DVB_SP887X
+ tristate "Spase sp887x based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
+
+ This driver needs external firmware. Please use the command
+ "<kerneldir>/scripts/get_dvb_firmware sp887x" to
+ download/extract it, and then copy it to /usr/lib/hotplug/firmware
+ or /lib/firmware (depending on configuration of firmware hotplug).
+
+config DVB_STV0367
+ tristate "ST STV0367 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T/C tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA10048
+ tristate "Philips TDA10048HN based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
+
+config DVB_TDA1004X
+ tristate "Philips TDA10045H/TDA10046H based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
+
+ This driver needs external firmware. Please use the commands
+ "<kerneldir>/scripts/get_dvb_firmware tda10045",
+ "<kerneldir>/scripts/get_dvb_firmware tda10046" to
+ download/extract them, and then copy them to /usr/lib/hotplug/firmware
+ or /lib/firmware (depending on configuration of firmware hotplug).
config DVB_ZD1301_DEMOD
tristate "ZyDAS ZD1301"
@@ -536,18 +533,20 @@ config DVB_ZD1301_DEMOD
help
Say Y when you want to support this frontend.
-config DVB_GP8PSK_FE
- tristate
- depends on DVB_CORE
- default DVB_USB_GP8PSK
+config DVB_ZL10353
+ tristate "Zarlink ZL10353 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-T tuner module. Say Y when you want to support this frontend.
source "drivers/media/dvb-frontends/cxd2880/Kconfig"
comment "DVB-C (cable) frontends"
depends on DVB_CORE
-config DVB_VES1820
- tristate "VLSI VES1820 based"
+config DVB_STV0297
+ tristate "ST STV0297 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
@@ -567,8 +566,8 @@ config DVB_TDA10023
help
A DVB-C tuner module. Say Y when you want to support this frontend.
-config DVB_STV0297
- tristate "ST STV0297 based"
+config DVB_VES1820
+ tristate "VLSI VES1820 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
@@ -577,46 +576,27 @@ config DVB_STV0297
comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
depends on DVB_CORE
-config DVB_NXT200X
- tristate "NxtWave Communications NXT2002/NXT2004 based"
+config DVB_AU8522
depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
- to support this frontend.
-
- This driver needs external firmware. Please use the commands
- "<kerneldir>/scripts/get_dvb_firmware nxt2002" and
- "<kerneldir>/scripts/get_dvb_firmware nxt2004" to
- download/extract them, and then copy them to /usr/lib/hotplug/firmware
- or /lib/firmware (depending on configuration of firmware hotplug).
+ tristate
-config DVB_OR51211
- tristate "Oren OR51211 based"
+config DVB_AU8522_DTV
+ tristate "Auvitek AU8522 based DTV demod"
depends on DVB_CORE && I2C
+ select DVB_AU8522
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-
- This driver needs external firmware. Please use the command
- "<kerneldir>/scripts/get_dvb_firmware or51211" to
- download it, and then copy it to /usr/lib/hotplug/firmware
- or /lib/firmware (depending on configuration of firmware hotplug).
+ An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
+ you want to enable DTV demodulation support for this frontend.
-config DVB_OR51132
- tristate "Oren OR51132 based"
- depends on DVB_CORE && I2C
+config DVB_AU8522_V4L
+ tristate "Auvitek AU8522 based ATV demod"
+ depends on VIDEO_DEV && DVB_CORE && I2C
+ select DVB_AU8522
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
- to support this frontend.
-
- This driver needs external firmware. Please use the commands
- "<kerneldir>/scripts/get_dvb_firmware or51132_vsb" and/or
- "<kerneldir>/scripts/get_dvb_firmware or51132_qam" to
- download firmwares for 8VSB and QAM64/256, respectively. Copy them to
- /usr/lib/hotplug/firmware or /lib/firmware (depending on
- configuration of firmware hotplug).
+ An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
+ you want to enable ATV demodulation support for this frontend.
config DVB_BCM3510
tristate "Broadcom BCM3510"
@@ -626,12 +606,12 @@ config DVB_BCM3510
An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
support this frontend.
-config DVB_LGDT330X
- tristate "LG Electronics LGDT3302/LGDT3303 based"
+config DVB_LG2160
+ tristate "LG Electronics LG216x based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+ An ATSC/MH demodulator module. Say Y when you want
to support this frontend.
config DVB_LGDT3305
@@ -650,72 +630,83 @@ config DVB_LGDT3306A
An ATSC 8VSB and QAM-B 64/256 demodulator module. Say Y when you want
to support this frontend.
-config DVB_LG2160
- tristate "LG Electronics LG216x based"
+config DVB_LGDT330X
+ tristate "LG Electronics LGDT3302/LGDT3303 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An ATSC/MH demodulator module. Say Y when you want
+ An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.
-config DVB_S5H1409
- tristate "Samsung S5H1409 based"
+config DVB_MXL692
+ tristate "MaxLinear MXL692 based"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ MaxLinear MxL692 is a combo tuner-demodulator that
+ supports ATSC 8VSB and QAM modes. Say Y when you want to
+ support this frontend.
+
+config DVB_NXT200X
+ tristate "NxtWave Communications NXT2002/NXT2004 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.
-config DVB_AU8522
- depends on DVB_CORE && I2C
- tristate
+ This driver needs external firmware. Please use the commands
+ "<kerneldir>/scripts/get_dvb_firmware nxt2002" and
+ "<kerneldir>/scripts/get_dvb_firmware nxt2004" to
+ download/extract them, and then copy them to /usr/lib/hotplug/firmware
+ or /lib/firmware (depending on configuration of firmware hotplug).
-config DVB_AU8522_DTV
- tristate "Auvitek AU8522 based DTV demod"
+config DVB_OR51132
+ tristate "Oren OR51132 based"
depends on DVB_CORE && I2C
- select DVB_AU8522
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
- you want to enable DTV demodulation support for this frontend.
+ An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+ to support this frontend.
-config DVB_AU8522_V4L
- tristate "Auvitek AU8522 based ATV demod"
- depends on VIDEO_DEV && DVB_CORE && I2C
- select DVB_AU8522
+ This driver needs external firmware. Please use the commands
+ "<kerneldir>/scripts/get_dvb_firmware or51132_vsb" and/or
+ "<kerneldir>/scripts/get_dvb_firmware or51132_qam" to
+ download firmwares for 8VSB and QAM64/256, respectively. Copy them to
+ /usr/lib/hotplug/firmware or /lib/firmware (depending on
+ configuration of firmware hotplug).
+
+config DVB_OR51211
+ tristate "Oren OR51211 based"
+ depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An ATSC 8VSB, QAM64/256 & NTSC demodulator module. Say Y when
- you want to enable ATV demodulation support for this frontend.
+ An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-config DVB_S5H1411
- tristate "Samsung S5H1411 based"
+ This driver needs external firmware. Please use the command
+ "<kerneldir>/scripts/get_dvb_firmware or51211" to
+ download it, and then copy it to /usr/lib/hotplug/firmware
+ or /lib/firmware (depending on configuration of firmware hotplug).
+
+config DVB_S5H1409
+ tristate "Samsung S5H1409 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.
-config DVB_MXL692
- tristate "MaxLinear MXL692 based"
+config DVB_S5H1411
+ tristate "Samsung S5H1411 based"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- MaxLinear MxL692 is a combo tuner-demodulator that
- supports ATSC 8VSB and QAM modes. Say Y when you want to
- support this frontend.
+ An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
+ to support this frontend.
comment "ISDB-T (terrestrial) frontends"
depends on DVB_CORE
-config DVB_S921
- tristate "Sharp S921 frontend"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module.
- Say Y when you want to support this frontend.
-
config DVB_DIB8000
tristate "DiBcom 8000MB/MC"
depends on DVB_CORE && I2C
@@ -732,17 +723,17 @@ config DVB_MB86A20S
A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator.
Say Y when you want to support this frontend.
-comment "ISDB-S (satellite) & ISDB-T (terrestrial) frontends"
- depends on DVB_CORE
-
-config DVB_TC90522
- tristate "Toshiba TC90522"
+config DVB_S921
+ tristate "Sharp S921 frontend"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Toshiba TC90522 2xISDB-S 8PSK + 2xISDB-T OFDM demodulator.
+ AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module.
Say Y when you want to support this frontend.
+comment "ISDB-S (satellite) & ISDB-T (terrestrial) frontends"
+ depends on DVB_CORE
+
config DVB_MN88443X
tristate "Socionext MN88443x"
depends on DVB_CORE && I2C
@@ -753,6 +744,14 @@ config DVB_MN88443X
ISDB-S + ISDB-T demodulator.
Say Y when you want to support this frontend.
+config DVB_TC90522
+ tristate "Toshiba TC90522"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ Toshiba TC90522 2xISDB-S 8PSK + 2xISDB-T OFDM demodulator.
+ Say Y when you want to support this frontend.
+
comment "Digital terrestrial only tuners/PLL"
depends on DVB_CORE
@@ -785,42 +784,44 @@ config DVB_TUNER_DIB0090
comment "SEC control devices for DVB-S"
depends on DVB_CORE
-source "drivers/media/dvb-frontends/drx39xyj/Kconfig"
+config DVB_A8293
+ tristate "Allegro A8293"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
-config DVB_LNBH25
- tristate "LNBH25 SEC controller"
+config DVB_AF9033
+ tristate "Afatech AF9033 DVB-T demodulator"
+ depends on DVB_CORE && I2C
+ select REGMAP_I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+
+config DVB_ASCOT2E
+ tristate "Sony Ascot2E tuner"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An SEC control chip.
- Say Y when you want to support this chip.
+ Say Y when you want to support this frontend.
-config DVB_LNBH29
- tristate "LNBH29 SEC controller"
+config DVB_ATBM8830
+ tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- LNB power supply and control voltage
- regulator chip with step-up converter
- and I2C interface for STMicroelectronics LNBH29.
- Say Y when you want to support this chip.
+ A DMB-TH tuner module. Say Y when you want to support this frontend.
-config DVB_LNBP21
- tristate "LNBP21/LNBH24 SEC controllers"
+config DVB_HELENE
+ tristate "Sony HELENE Sat/Ter tuner (CXD2858ER)"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- An SEC control chips.
+ Say Y when you want to support this frontend.
-config DVB_LNBP22
- tristate "LNBP22 SEC controllers"
+config DVB_HORUS3A
+ tristate "Sony Horus3A tuner"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- LNB power supply and control voltage
- regulator chip with step-up converter
- and I2C interface.
- Say Y when you want to support this chip.
+ Say Y when you want to support this frontend.
config DVB_ISL6405
tristate "ISL6405 SEC controller"
@@ -843,10 +844,12 @@ config DVB_ISL6423
help
A SEC controller chip from Intersil
-config DVB_A8293
- tristate "Allegro A8293"
+config DVB_IX2505V
+ tristate "Sharp IX2505V silicon tuner"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_LGS8GL5
tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)"
@@ -863,30 +866,40 @@ config DVB_LGS8GXX
help
A DMB-TH tuner module. Say Y when you want to support this frontend.
-config DVB_ATBM8830
- tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator"
+config DVB_LNBH25
+ tristate "LNBH25 SEC controller"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DMB-TH tuner module. Say Y when you want to support this frontend.
+ An SEC control chip.
+ Say Y when you want to support this chip.
-config DVB_TDA665x
- tristate "TDA665x tuner"
+config DVB_LNBH29
+ tristate "LNBH29 SEC controller"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Support for tuner modules based on Philips TDA6650/TDA6651 chips.
+ LNB power supply and control voltage
+ regulator chip with step-up converter
+ and I2C interface for STMicroelectronics LNBH29.
Say Y when you want to support this chip.
- Currently supported tuners:
- * Panasonic ENV57H12D5 (ET-50DT)
+config DVB_LNBP21
+ tristate "LNBP21/LNBH24 SEC controllers"
+ depends on DVB_CORE && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ An SEC control chips.
-config DVB_IX2505V
- tristate "Sharp IX2505V silicon tuner"
+config DVB_LNBP22
+ tristate "LNBP22 SEC controllers"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-S tuner module. Say Y when you want to support this frontend.
+ LNB power supply and control voltage
+ regulator chip with step-up converter
+ and I2C interface.
+ Say Y when you want to support this chip.
config DVB_M88RS2000
tristate "M88RS2000 DVB-S demodulator and tuner"
@@ -896,32 +909,18 @@ config DVB_M88RS2000
A DVB-S tuner module.
Say Y when you want to support this frontend.
-config DVB_AF9033
- tristate "Afatech AF9033 DVB-T demodulator"
- depends on DVB_CORE && I2C
- select REGMAP_I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
-
-config DVB_HORUS3A
- tristate "Sony Horus3A tuner"
+config DVB_TDA665x
+ tristate "TDA665x tuner"
depends on DVB_CORE && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y when you want to support this frontend.
+ Support for tuner modules based on Philips TDA6650/TDA6651 chips.
+ Say Y when you want to support this chip.
-config DVB_ASCOT2E
- tristate "Sony Ascot2E tuner"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y when you want to support this frontend.
+ Currently supported tuners:
+ * Panasonic ENV57H12D5 (ET-50DT)
-config DVB_HELENE
- tristate "Sony HELENE Sat/Ter tuner (CXD2858ER)"
- depends on DVB_CORE && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y when you want to support this frontend.
+source "drivers/media/dvb-frontends/drx39xyj/Kconfig"
comment "Common Interface (EN50221) controller drivers"
depends on DVB_CORE
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 5abc169f0a5c..14fe94f3c772 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -34,35 +34,53 @@ comment "audio, video and radio I2C drivers auto-selected by 'Autoselect ancilla
menu "Audio decoders, processors and mixers"
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
-config VIDEO_TVAUDIO
- tristate "Simple audio decoder chips"
+config VIDEO_CS3308
+ tristate "Cirrus Logic CS3308 audio ADC"
depends on VIDEO_DEV && I2C
help
- Support for several audio decoder chips found on some bt8xx boards:
- Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
- tea6320, tea6420, tda8425, ta8874z.
- Microchip: pic16c54 based design on ProVideo PV951 board.
+ Support for the Cirrus Logic CS3308 High Performance 8-Channel
+ Analog Volume Control
To compile this driver as a module, choose M here: the
- module will be called tvaudio.
+ module will be called cs3308.
-config VIDEO_TDA7432
- tristate "Philips TDA7432 audio processor"
+config VIDEO_CS5345
+ tristate "Cirrus Logic CS5345 audio ADC"
depends on VIDEO_DEV && I2C
help
- Support for tda7432 audio decoder chip found on some bt8xx boards.
+ Support for the Cirrus Logic CS5345 24-bit, 192 kHz
+ stereo A/D converter.
To compile this driver as a module, choose M here: the
- module will be called tda7432.
+ module will be called cs5345.
-config VIDEO_TDA9840
- tristate "Philips TDA9840 audio processor"
- depends on I2C
+config VIDEO_CS53L32A
+ tristate "Cirrus Logic CS53L32A audio ADC"
+ depends on VIDEO_DEV && I2C
help
- Support for tda9840 audio decoder chip found on some Zoran boards.
+ Support for the Cirrus Logic CS53L32A low voltage
+ stereo A/D converter.
To compile this driver as a module, choose M here: the
- module will be called tda9840.
+ module will be called cs53l32a.
+
+config VIDEO_MSP3400
+ tristate "Micronas MSP34xx audio decoders"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Micronas MSP34xx series of audio decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called msp3400.
+
+config VIDEO_SONY_BTF_MPX
+ tristate "Sony BTF's internal MPX"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the internal MPX of the Sony BTF-PG472Z tuner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sony-btf-mpx.
config VIDEO_TDA1997X
tristate "NXP TDA1997x HDMI receiver"
@@ -79,6 +97,24 @@ config VIDEO_TDA1997X
To compile this driver as a module, choose M here: the
module will be called tda1997x.
+config VIDEO_TDA7432
+ tristate "Philips TDA7432 audio processor"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for tda7432 audio decoder chip found on some bt8xx boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda7432.
+
+config VIDEO_TDA9840
+ tristate "Philips TDA9840 audio processor"
+ depends on I2C
+ help
+ Support for tda9840 audio decoder chip found on some Zoran boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tda9840.
+
config VIDEO_TEA6415C
tristate "Philips TEA6415C audio processor"
depends on I2C
@@ -97,53 +133,26 @@ config VIDEO_TEA6420
To compile this driver as a module, choose M here: the
module will be called tea6420.
-config VIDEO_MSP3400
- tristate "Micronas MSP34xx audio decoders"
- depends on VIDEO_DEV && I2C
- help
- Support for the Micronas MSP34xx series of audio decoders.
-
- To compile this driver as a module, choose M here: the
- module will be called msp3400.
-
-config VIDEO_CS3308
- tristate "Cirrus Logic CS3308 audio ADC"
- depends on VIDEO_DEV && I2C
- help
- Support for the Cirrus Logic CS3308 High Performance 8-Channel
- Analog Volume Control
-
- To compile this driver as a module, choose M here: the
- module will be called cs3308.
-
-config VIDEO_CS5345
- tristate "Cirrus Logic CS5345 audio ADC"
- depends on VIDEO_DEV && I2C
- help
- Support for the Cirrus Logic CS5345 24-bit, 192 kHz
- stereo A/D converter.
-
- To compile this driver as a module, choose M here: the
- module will be called cs5345.
-
-config VIDEO_CS53L32A
- tristate "Cirrus Logic CS53L32A audio ADC"
+config VIDEO_TLV320AIC23B
+ tristate "Texas Instruments TLV320AIC23B audio codec"
depends on VIDEO_DEV && I2C
help
- Support for the Cirrus Logic CS53L32A low voltage
- stereo A/D converter.
+ Support for the Texas Instruments TLV320AIC23B audio codec.
To compile this driver as a module, choose M here: the
- module will be called cs53l32a.
+ module will be called tlv320aic23b.
-config VIDEO_TLV320AIC23B
- tristate "Texas Instruments TLV320AIC23B audio codec"
+config VIDEO_TVAUDIO
+ tristate "Simple audio decoder chips"
depends on VIDEO_DEV && I2C
help
- Support for the Texas Instruments TLV320AIC23B audio codec.
+ Support for several audio decoder chips found on some bt8xx boards:
+ Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
+ tea6320, tea6420, tda8425, ta8874z.
+ Microchip: pic16c54 based design on ProVideo PV951 board.
To compile this driver as a module, choose M here: the
- module will be called tlv320aic23b.
+ module will be called tvaudio.
config VIDEO_UDA1342
tristate "Philips UDA1342 audio codec"
@@ -154,15 +163,14 @@ config VIDEO_UDA1342
To compile this driver as a module, choose M here: the
module will be called uda1342.
-config VIDEO_WM8775
- tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
+config VIDEO_VP27SMPX
+ tristate "Panasonic VP27's internal MPX"
depends on VIDEO_DEV && I2C
help
- Support for the Wolfson Microelectronics WM8775 high
- performance stereo A/D Converter with a 4 channel input mixer.
+ Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose M here: the
- module will be called wm8775.
+ module will be called vp27smpx.
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
@@ -174,23 +182,16 @@ config VIDEO_WM8739
To compile this driver as a module, choose M here: the
module will be called wm8739.
-config VIDEO_VP27SMPX
- tristate "Panasonic VP27's internal MPX"
+config VIDEO_WM8775
+ tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
depends on VIDEO_DEV && I2C
help
- Support for the internal MPX of the Panasonic VP27s tuner.
+ Support for the Wolfson Microelectronics WM8775 high
+ performance stereo A/D Converter with a 4 channel input mixer.
To compile this driver as a module, choose M here: the
- module will be called vp27smpx.
-
-config VIDEO_SONY_BTF_MPX
- tristate "Sony BTF's internal MPX"
- depends on VIDEO_DEV && I2C
- help
- Support for the internal MPX of the Sony BTF-PG472Z tuner.
+ module will be called wm8775.
- To compile this driver as a module, choose M here: the
- module will be called sony-btf-mpx.
endmenu
menu "RDS decoders"
@@ -207,6 +208,7 @@ config VIDEO_SAA6588
To compile this driver as a module, choose M here: the
module will be called saa6588.
+
endmenu
menu "Video decoders"
@@ -347,6 +349,20 @@ config VIDEO_KS0127
To compile this driver as a module, choose M here: the
module will be called ks0127.
+config VIDEO_MAX9286
+ tristate "Maxim MAX9286 GMSL deserializer support"
+ depends on I2C && I2C_MUX
+ depends on VIDEO_DEV
+ depends on OF_GPIO
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ help
+ This driver supports the Maxim MAX9286 GMSL deserializer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called max9286.
+
config VIDEO_ML86V7667
tristate "OKI ML86V7667 video decoder"
depends on VIDEO_DEV && I2C
@@ -476,20 +492,6 @@ config VIDEO_VPX3220
To compile this driver as a module, choose M here: the
module will be called vpx3220.
-config VIDEO_MAX9286
- tristate "Maxim MAX9286 GMSL deserializer support"
- depends on I2C && I2C_MUX
- depends on VIDEO_DEV
- depends on OF_GPIO
- select V4L2_FWNODE
- select VIDEO_V4L2_SUBDEV_API
- select MEDIA_CONTROLLER
- help
- This driver supports the Maxim MAX9286 GMSL deserializer.
-
- To compile this driver as a module, choose M here: the
- module will be called max9286.
-
comment "Video and audio decoders"
config VIDEO_SAA717X
@@ -508,23 +510,19 @@ endmenu
menu "Video encoders"
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
-config VIDEO_SAA7127
- tristate "Philips SAA7127/9 digital video encoders"
+config VIDEO_AD9389B
+ tristate "Analog Devices AD9389B encoder"
depends on VIDEO_DEV && I2C
- help
- Support for the Philips SAA7127/9 digital video encoders.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7127.
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
-config VIDEO_SAA7185
- tristate "Philips SAA7185 video encoder"
- depends on VIDEO_DEV && I2C
help
- Support for the Philips SAA7185 video encoder.
+ Support for the Analog Devices AD9389B video encoder.
+
+ This is a Analog Devices HDMI transmitter.
To compile this driver as a module, choose M here: the
- module will be called saa7185.
+ module will be called ad9389b.
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
@@ -586,25 +584,29 @@ config VIDEO_ADV7511_CEC
When selected the adv7511 will support the optional
HDMI CEC feature.
-config VIDEO_AD9389B
- tristate "Analog Devices AD9389B encoder"
- depends on VIDEO_DEV && I2C
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
-
+config VIDEO_AK881X
+ tristate "AK8813/AK8814 video encoders"
+ depends on I2C
help
- Support for the Analog Devices AD9389B video encoder.
+ Video output driver for AKM AK8813 and AK8814 TV encoders
- This is a Analog Devices HDMI transmitter.
+config VIDEO_SAA7127
+ tristate "Philips SAA7127/9 digital video encoders"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose M here: the
- module will be called ad9389b.
+ module will be called saa7127.
-config VIDEO_AK881X
- tristate "AK8813/AK8814 video encoders"
- depends on I2C
+config VIDEO_SAA7185
+ tristate "Philips SAA7185 video encoder"
+ depends on VIDEO_DEV && I2C
help
- Video output driver for AKM AK8813 and AK8814 TV encoders
+ Support for the Philips SAA7185 video encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa7185.
config VIDEO_THS8200
tristate "Texas Instruments THS8200 video encoder"
@@ -615,6 +617,7 @@ config VIDEO_THS8200
To compile this driver as a module, choose M here: the
module will be called ths8200.
+
endmenu
menu "Video improvement chips"
@@ -643,6 +646,7 @@ config VIDEO_UPD64083
To compile this driver as a module, choose M here: the
module will be called upd64083.
+
endmenu
menu "Audio/Video compression chips"
@@ -676,31 +680,11 @@ config SDR_MAX2175
To compile this driver as a module, choose M here; the
module will be called max2175.
-
endmenu
menu "Miscellaneous helper chips"
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
-config VIDEO_THS7303
- tristate "THS7303/53 Video Amplifier"
- depends on VIDEO_DEV && I2C
- select V4L2_ASYNC
- help
- Support for TI THS7303/53 video amplifier
-
- To compile this driver as a module, choose M here: the
- module will be called ths7303.
-
-config VIDEO_M52790
- tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_DEV && I2C
- help
- Support for the Mitsubishi M52790 A/V switch.
-
- To compile this driver as a module, choose M here: the
- module will be called m52790.
-
config VIDEO_I2C
tristate "I2C transport video support"
depends on VIDEO_DEV && I2C
@@ -715,6 +699,15 @@ config VIDEO_I2C
To compile this driver as a module, choose M here: the
module will be called video-i2c
+config VIDEO_M52790
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_DEV && I2C
+ help
+ Support for the Mitsubishi M52790 A/V switch.
+
+ To compile this driver as a module, choose M here: the
+ module will be called m52790.
+
config VIDEO_ST_MIPID02
tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
depends on I2C && VIDEO_DEV
@@ -728,6 +721,17 @@ config VIDEO_ST_MIPID02
To compile this driver as a module, choose M here: the
module will be called st-mipid02.
+
+config VIDEO_THS7303
+ tristate "THS7303/53 Video Amplifier"
+ depends on VIDEO_DEV && I2C
+ select V4L2_ASYNC
+ help
+ Support for TI THS7303/53 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7303.
+
endmenu
#
@@ -922,6 +926,103 @@ config VIDEO_IMX412
To compile this driver as a module, choose M here: the
module will be called imx412.
+config VIDEO_MAX9271_LIB
+ tristate
+
+config VIDEO_MT9M001
+ tristate "mt9m001 support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config VIDEO_MT9M032
+ tristate "MT9M032 camera sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select VIDEO_APTINA_PLL
+ help
+ This driver supports MT9M032 camera sensors from Aptina, monochrome
+ models only.
+
+config VIDEO_MT9M111
+ tristate "mt9m111, mt9m112 and mt9m131 support"
+ depends on I2C && VIDEO_DEV
+ select V4L2_FWNODE
+ help
+ This driver supports MT9M111, MT9M112 and MT9M131 cameras from
+ Micron/Aptina
+
+config VIDEO_MT9P031
+ tristate "Aptina MT9P031 support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select VIDEO_APTINA_PLL
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) mt9p031 5 Mpixel camera.
+
+config VIDEO_MT9T001
+ tristate "Aptina MT9T001 support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) mt0t001 3 Mpixel camera.
+
+config VIDEO_MT9T112
+ tristate "Aptina MT9T111/MT9T112 support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the Aptina
+ (Micron) MT9T111 and MT9T112 3 Mpixel camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mt9t112.
+
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
+config VIDEO_MT9V032
+ tristate "Micron MT9V032 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select REGMAP_I2C
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the Micron
+ MT9V032 752x480 CMOS sensor.
+
+config VIDEO_MT9V111
+ tristate "Aptina MT9V111 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This is a Video4Linux2 sensor driver for the Aptina/Micron
+ MT9V111 sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mt9v111.
+
+config VIDEO_NOON010PC30
+ tristate "Siliconfile NOON010PC30 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This driver supports NOON010PC30 CIF camera from Siliconfile
+
config VIDEO_OG01A1B
tristate "OmniVision OG01A1B sensor support"
depends on I2C && VIDEO_DEV
@@ -961,6 +1062,26 @@ config VIDEO_OV08D10
To compile this driver as a module, choose M here: the
module will be called ov08d10.
+config VIDEO_OV13858
+ tristate "OmniVision OV13858 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV13858 camera.
+
+config VIDEO_OV13B10
+ tristate "OmniVision OV13B10 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV13B10 camera.
+
config VIDEO_OV2640
tristate "OmniVision OV2640 sensor support"
depends on VIDEO_DEV && I2C
@@ -1072,16 +1193,6 @@ config VIDEO_OV5648
To compile this driver as a module, choose M here: the
module will be called ov5648.
-config VIDEO_OV6650
- tristate "OmniVision OV6650 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV6650 camera.
-
- To compile this driver as a module, choose M here: the
- module will be called ov6650.
-
config VIDEO_OV5670
tristate "OmniVision OV5670 sensor support"
depends on I2C && VIDEO_DEV
@@ -1130,30 +1241,28 @@ config VIDEO_OV5695
To compile this driver as a module, choose M here: the
module will be called ov5695.
-config VIDEO_OV7251
- tristate "OmniVision OV7251 sensor support"
+config VIDEO_OV6650
+ tristate "OmniVision OV6650 sensor support"
depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
- OV7251 camera.
+ OV6650 camera.
To compile this driver as a module, choose M here: the
- module will be called ov7251.
+ module will be called ov6650.
-config VIDEO_OV772X
- tristate "OmniVision OV772x sensor support"
+config VIDEO_OV7251
+ tristate "OmniVision OV7251 sensor support"
depends on I2C && VIDEO_DEV
- select REGMAP_SCCB
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
- OV772x camera.
+ OV7251 camera.
To compile this driver as a module, choose M here: the
- module will be called ov772x.
+ module will be called ov7251.
config VIDEO_OV7640
tristate "OmniVision OV7640 sensor support"
@@ -1174,6 +1283,18 @@ config VIDEO_OV7670
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_OV772X
+ tristate "OmniVision OV772x sensor support"
+ depends on I2C && VIDEO_DEV
+ select REGMAP_SCCB
+ select V4L2_FWNODE
+ help
+ This is a Video4Linux2 sensor driver for the OmniVision
+ OV772x camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ov772x.
+
config VIDEO_OV7740
tristate "OmniVision OV7740 sensor support"
depends on I2C && VIDEO_DEV
@@ -1253,141 +1374,6 @@ config VIDEO_OV9734
To compile this driver as a module, choose M here: the
module's name is ov9734.
-config VIDEO_OV13858
- tristate "OmniVision OV13858 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV13858 camera.
-
-config VIDEO_OV13B10
- tristate "OmniVision OV13B10 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the OmniVision
- OV13B10 camera.
-
-config VIDEO_VS6624
- tristate "ST VS6624 sensor support"
- depends on VIDEO_DEV && I2C
- help
- This is a Video4Linux2 sensor driver for the ST VS6624
- camera.
-
- To compile this driver as a module, choose M here: the
- module will be called vs6624.
-
-config VIDEO_MT9M001
- tristate "mt9m001 support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This driver supports MT9M001 cameras from Micron, monochrome
- and colour models.
-
-config VIDEO_MT9M032
- tristate "MT9M032 camera sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select VIDEO_APTINA_PLL
- help
- This driver supports MT9M032 camera sensors from Aptina, monochrome
- models only.
-
-config VIDEO_MT9M111
- tristate "mt9m111, mt9m112 and mt9m131 support"
- depends on I2C && VIDEO_DEV
- select V4L2_FWNODE
- help
- This driver supports MT9M111, MT9M112 and MT9M131 cameras from
- Micron/Aptina
-
-config VIDEO_MT9P031
- tristate "Aptina MT9P031 support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select VIDEO_APTINA_PLL
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Aptina
- (Micron) mt9p031 5 Mpixel camera.
-
-config VIDEO_MT9T001
- tristate "Aptina MT9T001 support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a Video4Linux2 sensor driver for the Aptina
- (Micron) mt0t001 3 Mpixel camera.
-
-config VIDEO_MT9T112
- tristate "Aptina MT9T111/MT9T112 support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the Aptina
- (Micron) MT9T111 and MT9T112 3 Mpixel camera.
-
- To compile this driver as a module, choose M here: the
- module will be called mt9t112.
-
-config VIDEO_MT9V011
- tristate "Micron mt9v011 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the Micron
- mt0v011 1.3 Mpixel camera. It currently only works with the
- em28xx driver.
-
-config VIDEO_MT9V032
- tristate "Micron MT9V032 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- select REGMAP_I2C
- select V4L2_FWNODE
- help
- This is a Video4Linux2 sensor driver for the Micron
- MT9V032 752x480 CMOS sensor.
-
-config VIDEO_MT9V111
- tristate "Aptina MT9V111 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This is a Video4Linux2 sensor driver for the Aptina/Micron
- MT9V111 sensor.
-
- To compile this driver as a module, choose M here: the
- module will be called mt9v111.
-
-config VIDEO_SR030PC30
- tristate "Siliconfile SR030PC30 sensor support"
- depends on I2C && VIDEO_DEV
- help
- This driver supports SR030PC30 VGA camera from Siliconfile
-
-config VIDEO_NOON010PC30
- tristate "Siliconfile NOON010PC30 sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This driver supports NOON010PC30 CIF camera from Siliconfile
-
-source "drivers/media/i2c/m5mols/Kconfig"
-
-config VIDEO_MAX9271_LIB
- tristate
-
config VIDEO_RDACM20
tristate "IMI RDACM20 camera support"
depends on I2C
@@ -1426,23 +1412,15 @@ config VIDEO_RJ54N1
To compile this driver as a module, choose M here: the
module will be called rj54n1.
-config VIDEO_S5K6AA
- tristate "Samsung S5K6AAFX sensor support"
- depends on I2C && VIDEO_DEV
- select MEDIA_CONTROLLER
- select VIDEO_V4L2_SUBDEV_API
- help
- This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
- camera sensor with an embedded SoC image signal processor.
-
-config VIDEO_S5K6A3
- tristate "Samsung S5K6A3 sensor support"
- depends on I2C && VIDEO_DEV
+config VIDEO_S5C73M3
+ tristate "Samsung S5C73M3 sensor support"
+ depends on I2C && SPI && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
help
- This is a V4L2 sensor driver for Samsung S5K6A3 raw
- camera sensor.
+ This is a V4L2 sensor driver for Samsung S5C73M3
+ 8 Mpixel camera.
config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
@@ -1464,18 +1442,43 @@ config VIDEO_S5K5BAF
This is a V4L2 sensor driver for Samsung S5K5BAF 2M
camera sensor with an embedded SoC image signal processor.
-source "drivers/media/i2c/ccs/Kconfig"
-source "drivers/media/i2c/et8ek8/Kconfig"
+config VIDEO_S5K6A3
+ tristate "Samsung S5K6A3 sensor support"
+ depends on I2C && VIDEO_DEV
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ This is a V4L2 sensor driver for Samsung S5K6A3 raw
+ camera sensor.
-config VIDEO_S5C73M3
- tristate "Samsung S5C73M3 sensor support"
- depends on I2C && SPI && VIDEO_DEV
+config VIDEO_S5K6AA
+ tristate "Samsung S5K6AAFX sensor support"
+ depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
- select V4L2_FWNODE
help
- This is a V4L2 sensor driver for Samsung S5C73M3
- 8 Mpixel camera.
+ This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
+ camera sensor with an embedded SoC image signal processor.
+
+config VIDEO_SR030PC30
+ tristate "Siliconfile SR030PC30 sensor support"
+ depends on I2C && VIDEO_DEV
+ help
+ This driver supports SR030PC30 VGA camera from Siliconfile
+
+config VIDEO_VS6624
+ tristate "ST VS6624 sensor support"
+ depends on VIDEO_DEV && I2C
+ help
+ This is a Video4Linux2 sensor driver for the ST VS6624
+ camera.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vs6624.
+
+source "drivers/media/i2c/ccs/Kconfig"
+source "drivers/media/i2c/et8ek8/Kconfig"
+source "drivers/media/i2c/m5mols/Kconfig"
endmenu
@@ -1572,6 +1575,7 @@ config VIDEO_LM3646
help
This is a driver for the lm3646 dual flash controllers. It controls
flash, torch LEDs.
+
endmenu
endif # VIDEO_DEV
diff --git a/drivers/media/mmc/Kconfig b/drivers/media/mmc/Kconfig
index 75aa6de08d53..2f9877bc61e4 100644
--- a/drivers/media/mmc/Kconfig
+++ b/drivers/media/mmc/Kconfig
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
+
source "drivers/media/mmc/siano/Kconfig"
diff --git a/drivers/media/pci/Kconfig b/drivers/media/pci/Kconfig
index 92b156530d91..1224d908713a 100644
--- a/drivers/media/pci/Kconfig
+++ b/drivers/media/pci/Kconfig
@@ -12,50 +12,55 @@ if MEDIA_PCI_SUPPORT
if MEDIA_CAMERA_SUPPORT
comment "Media capture support"
+
source "drivers/media/pci/meye/Kconfig"
source "drivers/media/pci/solo6x10/Kconfig"
source "drivers/media/pci/sta2x11/Kconfig"
source "drivers/media/pci/tw5864/Kconfig"
source "drivers/media/pci/tw68/Kconfig"
source "drivers/media/pci/tw686x/Kconfig"
+
endif
if MEDIA_ANALOG_TV_SUPPORT
comment "Media capture/analog TV support"
+
+source "drivers/media/pci/dt3155/Kconfig"
source "drivers/media/pci/ivtv/Kconfig"
source "drivers/media/pci/saa7146/Kconfig"
-source "drivers/media/pci/dt3155/Kconfig"
+
endif
if MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT
comment "Media capture/analog/hybrid TV support"
+
+source "drivers/media/pci/bt8xx/Kconfig"
+source "drivers/media/pci/cobalt/Kconfig"
source "drivers/media/pci/cx18/Kconfig"
source "drivers/media/pci/cx23885/Kconfig"
source "drivers/media/pci/cx25821/Kconfig"
source "drivers/media/pci/cx88/Kconfig"
-source "drivers/media/pci/bt8xx/Kconfig"
source "drivers/media/pci/saa7134/Kconfig"
source "drivers/media/pci/saa7164/Kconfig"
-source "drivers/media/pci/cobalt/Kconfig"
endif
if MEDIA_DIGITAL_TV_SUPPORT
comment "Media digital TV PCI Adapters"
-source "drivers/media/pci/ttpci/Kconfig"
+
source "drivers/media/pci/b2c2/Kconfig"
-source "drivers/media/pci/pluto2/Kconfig"
+source "drivers/media/pci/ddbridge/Kconfig"
source "drivers/media/pci/dm1105/Kconfig"
-source "drivers/media/pci/pt1/Kconfig"
-source "drivers/media/pci/pt3/Kconfig"
source "drivers/media/pci/mantis/Kconfig"
+source "drivers/media/pci/netup_unidvb/Kconfig"
source "drivers/media/pci/ngene/Kconfig"
-source "drivers/media/pci/ddbridge/Kconfig"
+source "drivers/media/pci/pluto2/Kconfig"
+source "drivers/media/pci/pt1/Kconfig"
+source "drivers/media/pci/pt3/Kconfig"
source "drivers/media/pci/smipcie/Kconfig"
-source "drivers/media/pci/netup_unidvb/Kconfig"
-endif
+source "drivers/media/pci/ttpci/Kconfig"
-source "drivers/media/pci/intel/ipu3/Kconfig"
+endif
config VIDEO_PCI_SKELETON
tristate "Skeleton PCI V4L2 driver"
@@ -68,5 +73,7 @@ config VIDEO_PCI_SKELETON
Enable build of the skeleton PCI driver, used as a reference
when developing new drivers.
+source "drivers/media/pci/intel/ipu3/Kconfig"
+
endif #MEDIA_PCI_SUPPORT
endif #PCI
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 58c10a2ed292..cca03bd2cc42 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -13,57 +13,6 @@ menuconfig RADIO_ADAPTERS
if RADIO_ADAPTERS
-config RADIO_TEA575X
- tristate
-
-source "drivers/media/radio/si470x/Kconfig"
-
-config RADIO_SI4713
- tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
-
-source "drivers/media/radio/si4713/Kconfig"
-
-config RADIO_SI476X
- tristate "Silicon Laboratories Si476x I2C FM Radio"
- depends on I2C
- depends on MFD_SI476X_CORE
- depends on SND_SOC
- select SND_SOC_SI476X
- help
- Choose Y here if you have this FM radio chip.
-
- In order to control your radio card, you will need to use programs
- that are compatible with the Video For Linux 2 API. Information on
- this API and pointers to "v4l2" programs may be found at
- <file:Documentation/userspace-api/media/index.rst>.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-si476x.
-
-config USB_MR800
- tristate "AverMedia MR 800 USB FM radio support"
- depends on USB
- help
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-mr800.
-
-config USB_DSBR
- tristate "D-Link/GemTek USB FM radio support"
- depends on USB
- help
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers.
-
- To compile this driver as a module, choose M here: the
- module will be called dsbr100.
-
config RADIO_MAXIRADIO
tristate "Guillemot MAXI Radio FM 2000 radio"
depends on PCI
@@ -80,6 +29,18 @@ config RADIO_MAXIRADIO
To compile this driver as a module, choose M here: the
module will be called radio-maxiradio.
+config RADIO_SAA7706H
+ tristate "SAA7706H Car Radio DSP"
+ depends on I2C
+ help
+ Say Y here if you want to use the SAA7706H Car radio Digital
+ Signal Processor, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called SAA7706H.
+
config RADIO_SHARK
tristate "Griffin radioSHARK USB radio receiver"
depends on USB
@@ -115,41 +76,28 @@ config RADIO_SHARK2
To compile this driver as a module, choose M here: the
module will be called radio-shark2.
-config USB_KEENE
- tristate "Keene FM Transmitter USB support"
- depends on USB
- help
- Say Y here if you want to connect this type of FM transmitter
- to your computer's USB port.
-
- To compile this driver as a module, choose M here: the
- module will be called radio-keene.
+config RADIO_SI4713
+ tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
-config USB_RAREMONO
- tristate "Thanko's Raremono AM/FM/SW radio support"
- depends on USB
+config RADIO_SI476X
+ tristate "Silicon Laboratories Si476x I2C FM Radio"
+ depends on I2C
+ depends on MFD_SI476X_CORE
+ depends on SND_SOC
+ select SND_SOC_SI476X
help
- The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
- It is one of the very few or perhaps the only consumer USB radio device
- to receive the AM/FM/SW bands.
+ Choose Y here if you have this FM radio chip.
- Say Y here if you want to connect this type of AM/FM/SW receiver
- to your computer's USB port.
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux 2 API. Information on
+ this API and pointers to "v4l2" programs may be found at
+ <file:Documentation/userspace-api/media/index.rst>.
To compile this driver as a module, choose M here: the
- module will be called radio-raremono.
-
-config USB_MA901
- tristate "Masterkit MA901 USB FM radio support"
- depends on USB
- help
- Say Y here if you want to connect this type of radio to your
- computer's USB port. Note that the audio is not digital, and
- you must connect the line out connector to a sound card or a
- set of speakers or headphones.
+ module will be called radio-si476x.
- To compile this driver as a module, choose M here: the
- module will be called radio-ma901.
+config RADIO_TEA575X
+ tristate
config RADIO_TEA5764
tristate "TEA5764 I2C FM radio support"
@@ -170,18 +118,6 @@ config RADIO_TEA5764_XTAL
Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
here if TEA5764 reference frequency is connected in FREQIN.
-config RADIO_SAA7706H
- tristate "SAA7706H Car Radio DSP"
- depends on I2C
- help
- Say Y here if you want to use the SAA7706H Car radio Digital
- Signal Processor, found for instance on the Russellville development
- board. On the russellville the device is connected to internal
- timberdale I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called SAA7706H.
-
config RADIO_TEF6862
tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
depends on I2C
@@ -222,88 +158,84 @@ config RADIO_WL1273
To compile this driver as a module, choose M here: the
module will be called radio-wl1273.
-# TI's ST based wl128x FM radio
-source "drivers/media/radio/wl128x/Kconfig"
+config USB_DSBR
+ tristate "D-Link/GemTek USB FM radio support"
+ depends on USB
+ help
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
-#
-# ISA drivers configuration
-#
+ To compile this driver as a module, choose M here: the
+ module will be called dsbr100.
-menuconfig V4L_RADIO_ISA_DRIVERS
- bool "ISA radio devices"
- depends on ISA || COMPILE_TEST
+config USB_KEENE
+ tristate "Keene FM Transmitter USB support"
+ depends on USB
help
- Say Y here to enable support for these ISA drivers.
-
-if V4L_RADIO_ISA_DRIVERS
+ Say Y here if you want to connect this type of FM transmitter
+ to your computer's USB port.
-config RADIO_ISA
- depends on ISA || COMPILE_TEST
- tristate
+ To compile this driver as a module, choose M here: the
+ module will be called radio-keene.
-config RADIO_CADET
- tristate "ADS Cadet AM/FM Tuner"
- depends on ISA || COMPILE_TEST
+config USB_MA901
+ tristate "Masterkit MA901 USB FM radio support"
+ depends on USB
help
- Choose Y here if you have one of these AM/FM radio cards, and then
- fill in the port address below.
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers or headphones.
To compile this driver as a module, choose M here: the
- module will be called radio-cadet.
+ module will be called radio-ma901.
-config RADIO_RTRACK
- tristate "AIMSlab RadioTrack (aka RadioReveal) support"
- depends on ISA || COMPILE_TEST
- select RADIO_ISA
+config USB_MR800
+ tristate "AverMedia MR 800 USB FM radio support"
+ depends on USB
help
- Choose Y here if you have one of these FM radio cards, and then fill
- in the port address below.
+ Say Y here if you want to connect this type of radio to your
+ computer's USB port. Note that the audio is not digital, and
+ you must connect the line out connector to a sound card or a
+ set of speakers.
- Note that newer AIMSlab RadioTrack cards have a different chipset
- and are not supported by this driver. For these cards, use the
- RadioTrack II driver below.
+ To compile this driver as a module, choose M here: the
+ module will be called radio-mr800.
- If you have a GemTeks combined (PnP) sound- and radio card you must
- use this driver as a module and setup the card with isapnptools.
- You must also pass the module a suitable io parameter, 0x248 has
- been reported to be used by these cards.
+config USB_RAREMONO
+ tristate "Thanko's Raremono AM/FM/SW radio support"
+ depends on USB
+ help
+ The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
+ It is one of the very few or perhaps the only consumer USB radio device
+ to receive the AM/FM/SW bands.
- More information is contained in the file
- <file:Documentation/driver-api/media/drivers/radiotrack.rst>.
+ Say Y here if you want to connect this type of AM/FM/SW receiver
+ to your computer's USB port.
To compile this driver as a module, choose M here: the
- module will be called radio-aimslab.
+ module will be called radio-raremono.
-config RADIO_RTRACK_PORT
- hex "RadioTrack i/o port (0x20f or 0x30f)"
- depends on RADIO_RTRACK=y
- default "30f"
- help
- Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
- haven't changed the jumper setting on the card.
+source "drivers/media/radio/si470x/Kconfig"
+source "drivers/media/radio/si4713/Kconfig"
-config RADIO_RTRACK2
- tristate "AIMSlab RadioTrack II support"
- depends on ISA || COMPILE_TEST
- select RADIO_ISA
- help
- Choose Y here if you have this FM radio card, and then fill in the
- port address below.
+# TI's ST based wl128x FM radio
- Note: this driver hasn't been tested since a long time due to lack
- of hardware. If you have this hardware, then please contact the
- linux-media mailinglist.
+source "drivers/media/radio/wl128x/Kconfig"
- To compile this driver as a module, choose M here: the
- module will be called radio-rtrack2.
+#
+# ISA drivers configuration
+#
-config RADIO_RTRACK2_PORT
- hex "RadioTrack II i/o port (0x20c or 0x30c)"
- depends on RADIO_RTRACK2=y
- default "30c"
+menuconfig V4L_RADIO_ISA_DRIVERS
+ bool "ISA radio devices"
+ depends on ISA || COMPILE_TEST
help
- Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
- haven't changed the jumper setting on the card.
+ Say Y here to enable support for these ISA drivers.
+
+if V4L_RADIO_ISA_DRIVERS
config RADIO_AZTECH
tristate "Aztech/Packard Bell Radio"
@@ -325,6 +257,16 @@ config RADIO_AZTECH_PORT
haven't changed the setting of jumper JP3 on the card. Removing the
jumper sets the card to 0x358.
+config RADIO_CADET
+ tristate "ADS Cadet AM/FM Tuner"
+ depends on ISA || COMPILE_TEST
+ help
+ Choose Y here if you have one of these AM/FM radio cards, and then
+ fill in the port address below.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-cadet.
+
config RADIO_GEMTEK
tristate "GemTek Radio card (or compatible) support"
depends on ISA || COMPILE_TEST
@@ -365,6 +307,10 @@ config RADIO_GEMTEK_PROBE
following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
0x28c.
+config RADIO_ISA
+ depends on ISA || COMPILE_TEST
+ tristate
+
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
depends on ISA || COMPILE_TEST
@@ -380,6 +326,60 @@ config RADIO_MIROPCM20
To compile this driver as a module, choose M here: the
module will be called radio-miropcm20.
+config RADIO_RTRACK
+ tristate "AIMSlab RadioTrack (aka RadioReveal) support"
+ depends on ISA || COMPILE_TEST
+ select RADIO_ISA
+ help
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address below.
+
+ Note that newer AIMSlab RadioTrack cards have a different chipset
+ and are not supported by this driver. For these cards, use the
+ RadioTrack II driver below.
+
+ If you have a GemTeks combined (PnP) sound- and radio card you must
+ use this driver as a module and setup the card with isapnptools.
+ You must also pass the module a suitable io parameter, 0x248 has
+ been reported to be used by these cards.
+
+ More information is contained in the file
+ <file:Documentation/driver-api/media/drivers/radiotrack.rst>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-aimslab.
+
+config RADIO_RTRACK2
+ tristate "AIMSlab RadioTrack II support"
+ depends on ISA || COMPILE_TEST
+ select RADIO_ISA
+ help
+ Choose Y here if you have this FM radio card, and then fill in the
+ port address below.
+
+ Note: this driver hasn't been tested since a long time due to lack
+ of hardware. If you have this hardware, then please contact the
+ linux-media mailinglist.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-rtrack2.
+
+config RADIO_RTRACK2_PORT
+ hex "RadioTrack II i/o port (0x20c or 0x30c)"
+ depends on RADIO_RTRACK2=y
+ default "30c"
+ help
+ Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
+ haven't changed the jumper setting on the card.
+
+config RADIO_RTRACK_PORT
+ hex "RadioTrack i/o port (0x20f or 0x30f)"
+ depends on RADIO_RTRACK=y
+ default "30f"
+ help
+ Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
+ haven't changed the jumper setting on the card.
+
config RADIO_SF16FMI
tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
depends on ISA || COMPILE_TEST
@@ -451,13 +451,6 @@ config RADIO_TYPHOON
To compile this driver as a module, choose M here: the
module will be called radio-typhoon.
-config RADIO_TYPHOON_PORT
- hex "Typhoon I/O port (0x316 or 0x336)"
- depends on RADIO_TYPHOON=y
- default "316"
- help
- Enter the I/O port of your Typhoon or EcoRadio radio card.
-
config RADIO_TYPHOON_MUTEFREQ
int "Typhoon frequency set when muting the device (kHz)"
depends on RADIO_TYPHOON=y
@@ -470,6 +463,13 @@ config RADIO_TYPHOON_MUTEFREQ
the device is muted. There should be no local radio station at that
frequency.
+config RADIO_TYPHOON_PORT
+ hex "Typhoon I/O port (0x316 or 0x336)"
+ depends on RADIO_TYPHOON=y
+ default "316"
+ help
+ Enter the I/O port of your Typhoon or EcoRadio radio card.
+
config RADIO_ZOLTRIX
tristate "Zoltrix Radio"
depends on ISA || COMPILE_TEST
diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index c111af820ae4..f560fc38895f 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -15,15 +15,6 @@ menuconfig RC_CORE
Say Y when you have a TV or an IR device.
if RC_CORE
-source "drivers/media/rc/keymaps/Kconfig"
-
-config LIRC
- bool "LIRC user interface"
- help
- Enable this option to enable the Linux Infrared Remote
- Control user interface (e.g. /dev/lirc*). This interface
- passes raw IR to and from userspace, which is needed for
- IR transmitting (aka "blasting") and for the lirc daemon.
config BPF_LIRC_MODE2
bool "Support for eBPF programs attached to lirc devices"
@@ -38,10 +29,45 @@ config BPF_LIRC_MODE2
These eBPF programs can be used to decode IR into scancodes, for
IR protocols not supported by the kernel decoders.
+config LIRC
+ bool "LIRC user interface"
+ help
+ Enable this option to enable the Linux Infrared Remote
+ Control user interface (e.g. /dev/lirc*). This interface
+ passes raw IR to and from userspace, which is needed for
+ IR transmitting (aka "blasting") and for the lirc daemon.
+
+source "drivers/media/rc/keymaps/Kconfig"
+
menuconfig RC_DECODERS
bool "Remote controller decoders"
if RC_DECODERS
+
+config IR_IMON_DECODER
+ tristate "Enable IR raw decoder for the iMON protocol"
+ help
+ Enable this option if you have iMON PAD or Antec Veris infrared
+ remote control and you would like to use it with a raw IR
+ receiver, or if you wish to use an encoder to transmit this IR.
+
+config IR_JVC_DECODER
+ tristate "Enable IR raw decoder for the JVC protocol"
+ select BITREVERSE
+
+ help
+ Enable this option if you have an infrared remote control which
+ uses the JVC protocol, and you need software decoding support.
+
+config IR_MCE_KBD_DECODER
+ tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+ select BITREVERSE
+
+ help
+ Enable this option if you have a Microsoft Remote Keyboard for
+ Windows Media Center Edition, which you would like to use with
+ a raw IR receiver in your system.
+
config IR_NEC_DECODER
tristate "Enable IR raw decoder for the NEC protocol"
select BITREVERSE
@@ -66,21 +92,17 @@ config IR_RC6_DECODER
Enable this option if you have an infrared remote control which
uses the RC6 protocol, and you need software decoding support.
-config IR_JVC_DECODER
- tristate "Enable IR raw decoder for the JVC protocol"
- select BITREVERSE
-
+config IR_RCMM_DECODER
+ tristate "Enable IR raw decoder for the RC-MM protocol"
help
- Enable this option if you have an infrared remote control which
- uses the JVC protocol, and you need software decoding support.
-
-config IR_SONY_DECODER
- tristate "Enable IR raw decoder for the Sony protocol"
- select BITREVERSE
+ Enable this option when you have IR with RC-MM protocol, and
+ you need the software decoder. The driver supports 12,
+ 24 and 32 bits RC-MM variants. You can enable or disable the
+ different modes using the following RC protocol keywords:
+ 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
- help
- Enable this option if you have an infrared remote control which
- uses the Sony protocol, and you need software decoding support.
+ To compile this driver as a module, choose M here: the module
+ will be called ir-rcmm-decoder.
config IR_SANYO_DECODER
tristate "Enable IR raw decoder for the Sanyo protocol"
@@ -100,14 +122,13 @@ config IR_SHARP_DECODER
uses the Sharp protocol (Sharp, Denon), and you need software
decoding support.
-config IR_MCE_KBD_DECODER
- tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
+config IR_SONY_DECODER
+ tristate "Enable IR raw decoder for the Sony protocol"
select BITREVERSE
help
- Enable this option if you have a Microsoft Remote Keyboard for
- Windows Media Center Edition, which you would like to use with
- a raw IR receiver in your system.
+ Enable this option if you have an infrared remote control which
+ uses the Sony protocol, and you need software decoding support.
config IR_XMP_DECODER
tristate "Enable IR raw decoder for the XMP protocol"
@@ -117,25 +138,6 @@ config IR_XMP_DECODER
Enable this option if you have IR with XMP protocol, and
if the IR is decoded in software
-config IR_IMON_DECODER
- tristate "Enable IR raw decoder for the iMON protocol"
- help
- Enable this option if you have iMON PAD or Antec Veris infrared
- remote control and you would like to use it with a raw IR
- receiver, or if you wish to use an encoder to transmit this IR.
-
-config IR_RCMM_DECODER
- tristate "Enable IR raw decoder for the RC-MM protocol"
- help
- Enable this option when you have IR with RC-MM protocol, and
- you need the software decoder. The driver supports 12,
- 24 and 32 bits RC-MM variants. You can enable or disable the
- different modes using the following RC protocol keywords:
- 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'.
-
- To compile this driver as a module, choose M here: the module
- will be called ir-rcmm-decoder.
-
endif #RC_DECODERS
menuconfig RC_DEVICES
@@ -143,23 +145,6 @@ menuconfig RC_DEVICES
if RC_DEVICES
-config RC_ATI_REMOTE
- tristate "ATI / X10 based USB RF remote controls"
- depends on USB
- help
- Say Y here if you want to use an X10 based USB remote control.
- These are RF remotes with USB receivers.
-
- Such devices include the ATI remote that comes with many of ATI's
- All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
- Medion RF remote, and SnapStream FireFly remote.
-
- This driver provides mouse pointer, left and right mouse buttons,
- and maps all the other remote buttons to keypress events.
-
- To compile this driver as a module, choose M here: the module will be
- called ati_remote.
-
config IR_ENE
tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
depends on PNP || COMPILE_TEST
@@ -173,6 +158,37 @@ config IR_ENE
To compile this driver as a module, choose M here: the
module will be called ene_ir.
+config IR_FINTEK
+ tristate "Fintek Consumer Infrared Transceiver"
+ depends on PNP || COMPILE_TEST
+ help
+ Say Y here to enable support for integrated infrared receiver
+ /transceiver made by Fintek. This chip is found on assorted
+ Jetway motherboards (and of course, possibly others).
+
+ To compile this driver as a module, choose M here: the
+ module will be called fintek-cir.
+
+config IR_GPIO_CIR
+ tristate "GPIO IR remote control"
+ depends on (OF && GPIOLIB) || COMPILE_TEST
+ help
+ Say Y if you want to use GPIO based IR Receiver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-ir-recv.
+
+config IR_GPIO_TX
+ tristate "GPIO IR Bit Banging Transmitter"
+ depends on LIRC
+ depends on (OF && GPIOLIB) || COMPILE_TEST
+ help
+ Say Y if you want to a GPIO based IR transmitter. This is a
+ bit banging driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gpio-ir-tx.
+
config IR_HIX5HD2
tristate "Hisilicon hix5hd2 IR remote control"
depends on (OF && HAS_IOMEM) || COMPILE_TEST
@@ -183,6 +199,33 @@ config IR_HIX5HD2
If you're not sure, select N here
+config IR_IGORPLUGUSB
+ tristate "IgorPlug-USB IR Receiver"
+ depends on USB
+ help
+ Say Y here if you want to use the IgorPlug-USB IR Receiver by
+ Igor Cesko. This device is included on the Fit-PC2.
+
+ Note that this device can only record bursts of 36 IR pulses and
+ spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
+
+ To compile this driver as a module, choose M here: the module will
+ be called igorplugusb.
+
+config IR_IGUANA
+ tristate "IguanaWorks USB IR Transceiver"
+ depends on USB
+ help
+ Say Y here if you want to use the IguanaWorks USB IR Transceiver.
+ Both infrared receive and send are supported. If you want to
+ change the ID or the pin config, use the user space driver from
+ IguanaWorks.
+
+ Only firmware 0x0205 and later is supported.
+
+ To compile this driver as a module, choose M here: the module will
+ be called iguanair.
+
config IR_IMON
tristate "SoundGraph iMON Receiver and Display"
depends on USB
@@ -203,16 +246,6 @@ config IR_IMON_RAW
To compile this driver as a module, choose M here: the
module will be called imon_raw.
-config IR_MCEUSB
- tristate "Windows Media Center Ed. eHome Infrared Transceiver"
- depends on USB
- help
- Say Y here if you want to use a Windows Media Center Edition
- eHome Infrared Transceiver.
-
- To compile this driver as a module, choose M here: the
- module will be called mceusb.
-
config IR_ITE_CIR
tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
depends on PNP || COMPILE_TEST
@@ -225,16 +258,15 @@ config IR_ITE_CIR
To compile this driver as a module, choose M here: the
module will be called ite-cir.
-config IR_FINTEK
- tristate "Fintek Consumer Infrared Transceiver"
- depends on PNP || COMPILE_TEST
+config IR_MCEUSB
+ tristate "Windows Media Center Ed. eHome Infrared Transceiver"
+ depends on USB
help
- Say Y here to enable support for integrated infrared receiver
- /transceiver made by Fintek. This chip is found on assorted
- Jetway motherboards (and of course, possibly others).
+ Say Y here if you want to use a Windows Media Center Edition
+ eHome Infrared Transceiver.
To compile this driver as a module, choose M here: the
- module will be called fintek-cir.
+ module will be called mceusb.
config IR_MESON
tristate "Amlogic Meson IR remote receiver"
@@ -278,6 +310,18 @@ config IR_NUVOTON
To compile this driver as a module, choose M here: the
module will be called nuvoton-cir.
+config IR_PWM_TX
+ tristate "PWM IR transmitter"
+ depends on LIRC
+ depends on PWM
+ depends on OF || COMPILE_TEST
+ help
+ Say Y if you want to use a PWM based IR transmitter. This is
+ more power efficient than the bit banging gpio driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called pwm-ir-tx.
+
config IR_REDRAT3
tristate "RedRat3 IR Transceiver"
depends on USB
@@ -289,6 +333,31 @@ config IR_REDRAT3
To compile this driver as a module, choose M here: the
module will be called redrat3.
+config IR_RX51
+ tristate "Nokia N900 IR transmitter diode"
+ depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
+ help
+ Say Y or M here if you want to enable support for the IR
+ transmitter diode built in the Nokia N900 (RX51) device.
+
+ The driver uses omap DM timers for generating the carrier
+ wave and pulses.
+
+config IR_SERIAL
+ tristate "Homebrew Serial Port Receiver"
+ help
+ Say Y if you want to use Homebrew Serial Port Receivers and
+ Transceivers.
+
+ To compile this driver as a module, choose M here: the module will
+ be called serial-ir.
+
+config IR_SERIAL_TRANSMITTER
+ bool "Serial Port Transmitter"
+ depends on IR_SERIAL
+ help
+ Serial Port Transmitter support
+
config IR_SPI
tristate "SPI connected IR LED"
depends on SPI && LIRC
@@ -309,47 +378,24 @@ config IR_STREAMZAP
To compile this driver as a module, choose M here: the
module will be called streamzap.
-config IR_WINBOND_CIR
- tristate "Winbond IR remote control"
- depends on (X86 && PNP) || COMPILE_TEST
- select NEW_LEDS
- select LEDS_CLASS
- select BITREVERSE
- help
- Say Y here if you want to use the IR remote functionality found
- in some Winbond SuperI/O chips. Currently only the WPCD376I
- chip is supported (included in some Intel Media series
- motherboards).
-
- To compile this driver as a module, choose M here: the module will
- be called winbond_cir.
-
-config IR_IGORPLUGUSB
- tristate "IgorPlug-USB IR Receiver"
- depends on USB
+config IR_SUNXI
+ tristate "SUNXI IR remote control"
+ depends on ARCH_SUNXI || COMPILE_TEST
help
- Say Y here if you want to use the IgorPlug-USB IR Receiver by
- Igor Cesko. This device is included on the Fit-PC2.
-
- Note that this device can only record bursts of 36 IR pulses and
- spaces, which is not enough for the NEC, Sanyo and RC-6 protocol.
+ Say Y if you want to use sunXi internal IR Controller
To compile this driver as a module, choose M here: the module will
- be called igorplugusb.
+ be called sunxi-ir.
-config IR_IGUANA
- tristate "IguanaWorks USB IR Transceiver"
+config IR_TOY
+ tristate "Infrared Toy and IR Droid"
depends on USB
help
- Say Y here if you want to use the IguanaWorks USB IR Transceiver.
- Both infrared receive and send are supported. If you want to
- change the ID or the pin config, use the user space driver from
- IguanaWorks.
-
- Only firmware 0x0205 and later is supported.
+ Say Y here if you want to use the Infrared Toy or IR Droid, USB
+ versions.
- To compile this driver as a module, choose M here: the module will
- be called iguanair.
+ To compile this driver as a module, choose M here: the module will be
+ called ir_toy.
config IR_TTUSBIR
tristate "TechnoTrend USB IR Receiver"
@@ -363,17 +409,37 @@ config IR_TTUSBIR
To compile this driver as a module, choose M here: the module will
be called ttusbir.
-config IR_RX51
- tristate "Nokia N900 IR transmitter diode"
- depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE
+config IR_WINBOND_CIR
+ tristate "Winbond IR remote control"
+ depends on (X86 && PNP) || COMPILE_TEST
+ select NEW_LEDS
+ select LEDS_CLASS
+ select BITREVERSE
help
- Say Y or M here if you want to enable support for the IR
- transmitter diode built in the Nokia N900 (RX51) device.
+ Say Y here if you want to use the IR remote functionality found
+ in some Winbond SuperI/O chips. Currently only the WPCD376I
+ chip is supported (included in some Intel Media series
+ motherboards).
- The driver uses omap DM timers for generating the carrier
- wave and pulses.
+ To compile this driver as a module, choose M here: the module will
+ be called winbond_cir.
-source "drivers/media/rc/img-ir/Kconfig"
+config RC_ATI_REMOTE
+ tristate "ATI / X10 based USB RF remote controls"
+ depends on USB
+ help
+ Say Y here if you want to use an X10 based USB remote control.
+ These are RF remotes with USB receivers.
+
+ Such devices include the ATI remote that comes with many of ATI's
+ All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
+ Medion RF remote, and SnapStream FireFly remote.
+
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote.
config RC_LOOPBACK
tristate "Remote Control Loopback Driver"
@@ -387,38 +453,6 @@ config RC_LOOPBACK
To compile this driver as a module, choose M here: the module will
be called rc_loopback.
-config IR_GPIO_CIR
- tristate "GPIO IR remote control"
- depends on (OF && GPIOLIB) || COMPILE_TEST
- help
- Say Y if you want to use GPIO based IR Receiver.
-
- To compile this driver as a module, choose M here: the module will
- be called gpio-ir-recv.
-
-config IR_GPIO_TX
- tristate "GPIO IR Bit Banging Transmitter"
- depends on LIRC
- depends on (OF && GPIOLIB) || COMPILE_TEST
- help
- Say Y if you want to a GPIO based IR transmitter. This is a
- bit banging driver.
-
- To compile this driver as a module, choose M here: the module will
- be called gpio-ir-tx.
-
-config IR_PWM_TX
- tristate "PWM IR transmitter"
- depends on LIRC
- depends on PWM
- depends on OF || COMPILE_TEST
- help
- Say Y if you want to use a PWM based IR transmitter. This is
- more power efficient than the bit banging gpio driver.
-
- To compile this driver as a module, choose M here: the module will
- be called pwm-ir-tx.
-
config RC_ST
tristate "ST remote control receiver"
depends on ARCH_STI || COMPILE_TEST
@@ -429,30 +463,6 @@ config RC_ST
If you're not sure, select N here.
-config IR_SUNXI
- tristate "SUNXI IR remote control"
- depends on ARCH_SUNXI || COMPILE_TEST
- help
- Say Y if you want to use sunXi internal IR Controller
-
- To compile this driver as a module, choose M here: the module will
- be called sunxi-ir.
-
-config IR_SERIAL
- tristate "Homebrew Serial Port Receiver"
- help
- Say Y if you want to use Homebrew Serial Port Receivers and
- Transceivers.
-
- To compile this driver as a module, choose M here: the module will
- be called serial-ir.
-
-config IR_SERIAL_TRANSMITTER
- bool "Serial Port Transmitter"
- depends on IR_SERIAL
- help
- Serial Port Transmitter support
-
config RC_XBOX_DVD
tristate "Xbox DVD Movie Playback Kit"
depends on USB
@@ -463,15 +473,7 @@ config RC_XBOX_DVD
To compile this driver as a module, choose M here: the module will be
called xbox_remote.
-config IR_TOY
- tristate "Infrared Toy and IR Droid"
- depends on USB
- help
- Say Y here if you want to use the Infrared Toy or IR Droid, USB
- versions.
-
- To compile this driver as a module, choose M here: the module will be
- called ir_toy.
+source "drivers/media/rc/img-ir/Kconfig"
endif #RC_DEVICES
diff --git a/drivers/media/test-drivers/Kconfig b/drivers/media/test-drivers/Kconfig
index d663d822ec75..51cf27834df0 100644
--- a/drivers/media/test-drivers/Kconfig
+++ b/drivers/media/test-drivers/Kconfig
@@ -6,10 +6,6 @@ menuconfig V4L_TEST_DRIVERS
if V4L_TEST_DRIVERS
-source "drivers/media/test-drivers/vimc/Kconfig"
-
-source "drivers/media/test-drivers/vivid/Kconfig"
-
config VIDEO_VIM2M
tristate "Virtual Memory-to-Memory Driver"
depends on VIDEO_DEV
@@ -22,6 +18,8 @@ config VIDEO_VIM2M
framework.
source "drivers/media/test-drivers/vicodec/Kconfig"
+source "drivers/media/test-drivers/vimc/Kconfig"
+source "drivers/media/test-drivers/vivid/Kconfig"
endif #V4L_TEST_DRIVERS
diff --git a/drivers/media/test-drivers/vidtv/Kconfig b/drivers/media/test-drivers/vidtv/Kconfig
index 22c4fd39461f..e511e51c0b5b 100644
--- a/drivers/media/test-drivers/vidtv/Kconfig
+++ b/drivers/media/test-drivers/vidtv/Kconfig
@@ -7,5 +7,4 @@ config DVB_VIDTV
validate the existing APIs in the media subsystem. It can also aid developers
working on userspace applications.
-
When in doubt, say N.
diff --git a/drivers/media/tuners/Kconfig b/drivers/media/tuners/Kconfig
index 81d1d56b9317..0c01b0298099 100644
--- a/drivers/media/tuners/Kconfig
+++ b/drivers/media/tuners/Kconfig
@@ -23,65 +23,72 @@ menu "Customize TV tuners"
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT || MEDIA_SDR_SUPPORT
-config MEDIA_TUNER_SIMPLE
- tristate "Simple tuner support"
- depends on MEDIA_SUPPORT && I2C
- select MEDIA_TUNER_TDA9887
+config MEDIA_TUNER_E4000
+ tristate "Elonics E4000 silicon tuner"
+ depends on MEDIA_SUPPORT && I2C && VIDEO_DEV
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to include support for various simple tuners.
+ Elonics E4000 silicon tuner driver.
-config MEDIA_TUNER_TDA18250
- tristate "NXP TDA18250 silicon tuner"
+config MEDIA_TUNER_FC0011
+ tristate "Fitipower FC0011 silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to include support for TDA18250 tuner.
+ Fitipower FC0011 silicon tuner driver.
-config MEDIA_TUNER_TDA8290
- tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo"
+config MEDIA_TUNER_FC0012
+ tristate "Fitipower FC0012 silicon tuner"
depends on MEDIA_SUPPORT && I2C
- select MEDIA_TUNER_TDA827X
- select MEDIA_TUNER_TDA18271
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to include support for Philips TDA8290+8275(a) tuner.
+ Fitipower FC0012 silicon tuner driver.
-config MEDIA_TUNER_TDA827X
- tristate "Philips TDA827X silicon tuner"
+config MEDIA_TUNER_FC0013
+ tristate "Fitipower FC0013 silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A DVB-T silicon tuner module. Say Y when you want to support this tuner.
+ Fitipower FC0013 silicon tuner driver.
-config MEDIA_TUNER_TDA18271
- tristate "NXP TDA18271 silicon tuner"
+config MEDIA_TUNER_FC2580
+ tristate "FCI FC2580 silicon tuner"
+ depends on MEDIA_SUPPORT && I2C && VIDEO_DEV
+ select REGMAP_I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ FCI FC2580 silicon tuner driver.
+
+config MEDIA_TUNER_IT913X
+ tristate "ITE Tech IT913x silicon tuner"
depends on MEDIA_SUPPORT && I2C
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A silicon tuner module. Say Y when you want to support this tuner.
+ ITE Tech IT913x silicon tuner driver.
-config MEDIA_TUNER_TDA9887
- tristate "TDA 9885/6/7 analog IF demodulator"
+config MEDIA_TUNER_M88RS6000T
+ tristate "Montage M88RS6000 internal tuner"
depends on MEDIA_SUPPORT && I2C
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to include support for Philips TDA9885/6/7
- analog IF demodulator.
+ Montage M88RS6000 internal tuner.
-config MEDIA_TUNER_TEA5761
- tristate "TEA 5761 radio tuner"
+config MEDIA_TUNER_MAX2165
+ tristate "Maxim MAX2165 silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to include support for the Philips TEA5761 radio tuner.
+ A driver for the silicon tuner MAX2165 from Maxim.
-config MEDIA_TUNER_TEA5767
- tristate "TEA 5767 radio tuner"
+config MEDIA_TUNER_MC44S803
+ tristate "Freescale MC44S803 Low Power CMOS Broadband tuners"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to include support for the Philips TEA5767 radio tuner.
+ Say Y here to support the Freescale MC44S803 based tuners
config MEDIA_TUNER_MSI001
tristate "Mirics MSi001"
@@ -90,13 +97,6 @@ config MEDIA_TUNER_MSI001
help
Mirics MSi001 silicon tuner driver.
-config MEDIA_TUNER_MT20XX
- tristate "Microtune 2032 / 2050 tuners"
- depends on MEDIA_SUPPORT && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y here to include support for the MT2032 / MT2050 tuner.
-
config MEDIA_TUNER_MT2060
tristate "Microtune MT2060 silicon IF tuner"
depends on MEDIA_SUPPORT && I2C
@@ -111,12 +111,12 @@ config MEDIA_TUNER_MT2063
help
A driver for the silicon IF tuner MT2063 from Microtune.
-config MEDIA_TUNER_MT2266
- tristate "Microtune MT2266 silicon tuner"
+config MEDIA_TUNER_MT20XX
+ tristate "Microtune 2032 / 2050 tuners"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A driver for the silicon baseband tuner MT2266 from Microtune.
+ Say Y here to include support for the MT2032 / MT2050 tuner.
config MEDIA_TUNER_MT2131
tristate "Microtune MT2131 silicon tuner"
@@ -125,37 +125,19 @@ config MEDIA_TUNER_MT2131
help
A driver for the silicon baseband tuner MT2131 from Microtune.
-config MEDIA_TUNER_QT1010
- tristate "Quantek QT1010 silicon tuner"
- depends on MEDIA_SUPPORT && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- A driver for the silicon tuner QT1010 from Quantek.
-
-config MEDIA_TUNER_XC2028
- tristate "XCeive xc2028/xc3028 tuners"
- depends on MEDIA_SUPPORT && I2C
- default m if !MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y here to include support for the xc2028/xc3028 tuners.
-
-config MEDIA_TUNER_XC5000
- tristate "Xceive XC5000 silicon tuner"
+config MEDIA_TUNER_MT2266
+ tristate "Microtune MT2266 silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A driver for the silicon tuner XC5000 from Xceive.
- This device is only used inside a SiP called together with a
- demodulator for now.
+ A driver for the silicon baseband tuner MT2266 from Microtune.
-config MEDIA_TUNER_XC4000
- tristate "Xceive XC4000 silicon tuner"
+config MEDIA_TUNER_MXL301RF
+ tristate "MaxLinear MxL301RF tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A driver for the silicon tuner XC4000 from Xceive.
- This device is only used inside a SiP called together with a
- demodulator for now.
+ MaxLinear MxL301RF OFDM tuner driver.
config MEDIA_TUNER_MXL5005S
tristate "MaxLinear MSL5005S silicon tuner"
@@ -171,47 +153,49 @@ config MEDIA_TUNER_MXL5007T
help
A driver for the silicon tuner MxL5007T from MaxLinear.
-config MEDIA_TUNER_MC44S803
- tristate "Freescale MC44S803 Low Power CMOS Broadband tuners"
+config MEDIA_TUNER_QM1D1B0004
+ tristate "Sharp QM1D1B0004 tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the Freescale MC44S803 based tuners
+ Sharp QM1D1B0004 ISDB-S tuner driver.
-config MEDIA_TUNER_MAX2165
- tristate "Maxim MAX2165 silicon tuner"
+config MEDIA_TUNER_QM1D1C0042
+ tristate "Sharp QM1D1C0042 tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- A driver for the silicon tuner MAX2165 from Maxim.
+ Sharp QM1D1C0042 trellis coded 8PSK tuner driver.
-config MEDIA_TUNER_TDA18218
- tristate "NXP TDA18218 silicon tuner"
+config MEDIA_TUNER_QT1010
+ tristate "Quantek QT1010 silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- NXP TDA18218 silicon tuner driver.
+ A driver for the silicon tuner QT1010 from Quantek.
-config MEDIA_TUNER_FC0011
- tristate "Fitipower FC0011 silicon tuner"
+config MEDIA_TUNER_R820T
+ tristate "Rafael Micro R820T silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
+ select BITREVERSE
help
- Fitipower FC0011 silicon tuner driver.
+ Rafael Micro R820T silicon tuner driver.
-config MEDIA_TUNER_FC0012
- tristate "Fitipower FC0012 silicon tuner"
+config MEDIA_TUNER_SI2157
+ tristate "Silicon Labs Si2157 silicon tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Fitipower FC0012 silicon tuner driver.
+ Silicon Labs Si2157 silicon tuner driver.
-config MEDIA_TUNER_FC0013
- tristate "Fitipower FC0013 silicon tuner"
+config MEDIA_TUNER_SIMPLE
+ tristate "Simple tuner support"
depends on MEDIA_SUPPORT && I2C
+ select MEDIA_TUNER_TDA9887
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Fitipower FC0013 silicon tuner driver.
+ Say Y here to include support for various simple tuners.
config MEDIA_TUNER_TDA18212
tristate "NXP TDA18212 silicon tuner"
@@ -221,79 +205,96 @@ config MEDIA_TUNER_TDA18212
help
NXP TDA18212 silicon tuner driver.
-config MEDIA_TUNER_E4000
- tristate "Elonics E4000 silicon tuner"
- depends on MEDIA_SUPPORT && I2C && VIDEO_DEV
- select REGMAP_I2C
+config MEDIA_TUNER_TDA18218
+ tristate "NXP TDA18218 silicon tuner"
+ depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Elonics E4000 silicon tuner driver.
+ NXP TDA18218 silicon tuner driver.
-config MEDIA_TUNER_FC2580
- tristate "FCI FC2580 silicon tuner"
- depends on MEDIA_SUPPORT && I2C && VIDEO_DEV
- select REGMAP_I2C
+config MEDIA_TUNER_TDA18250
+ tristate "NXP TDA18250 silicon tuner"
+ depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- FCI FC2580 silicon tuner driver.
+ Say Y here to include support for TDA18250 tuner.
-config MEDIA_TUNER_M88RS6000T
- tristate "Montage M88RS6000 internal tuner"
+config MEDIA_TUNER_TDA18271
+ tristate "NXP TDA18271 silicon tuner"
depends on MEDIA_SUPPORT && I2C
- select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Montage M88RS6000 internal tuner.
+ A silicon tuner module. Say Y when you want to support this tuner.
-config MEDIA_TUNER_TUA9001
- tristate "Infineon TUA9001 silicon tuner"
+config MEDIA_TUNER_TDA827X
+ tristate "Philips TDA827X silicon tuner"
depends on MEDIA_SUPPORT && I2C
- select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Infineon TUA 9001 silicon tuner driver.
+ A DVB-T silicon tuner module. Say Y when you want to support this tuner.
-config MEDIA_TUNER_SI2157
- tristate "Silicon Labs Si2157 silicon tuner"
+config MEDIA_TUNER_TDA8290
+ tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo"
depends on MEDIA_SUPPORT && I2C
+ select MEDIA_TUNER_TDA827X
+ select MEDIA_TUNER_TDA18271
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Silicon Labs Si2157 silicon tuner driver.
+ Say Y here to include support for Philips TDA8290+8275(a) tuner.
-config MEDIA_TUNER_IT913X
- tristate "ITE Tech IT913x silicon tuner"
+config MEDIA_TUNER_TDA9887
+ tristate "TDA 9885/6/7 analog IF demodulator"
depends on MEDIA_SUPPORT && I2C
- select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- ITE Tech IT913x silicon tuner driver.
+ Say Y here to include support for Philips TDA9885/6/7
+ analog IF demodulator.
-config MEDIA_TUNER_R820T
- tristate "Rafael Micro R820T silicon tuner"
+config MEDIA_TUNER_TEA5761
+ tristate "TEA 5761 radio tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
- select BITREVERSE
help
- Rafael Micro R820T silicon tuner driver.
+ Say Y here to include support for the Philips TEA5761 radio tuner.
-config MEDIA_TUNER_MXL301RF
- tristate "MaxLinear MxL301RF tuner"
+config MEDIA_TUNER_TEA5767
+ tristate "TEA 5767 radio tuner"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- MaxLinear MxL301RF OFDM tuner driver.
+ Say Y here to include support for the Philips TEA5767 radio tuner.
-config MEDIA_TUNER_QM1D1C0042
- tristate "Sharp QM1D1C0042 tuner"
+config MEDIA_TUNER_TUA9001
+ tristate "Infineon TUA9001 silicon tuner"
depends on MEDIA_SUPPORT && I2C
+ select REGMAP_I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Sharp QM1D1C0042 trellis coded 8PSK tuner driver.
+ Infineon TUA 9001 silicon tuner driver.
-config MEDIA_TUNER_QM1D1B0004
- tristate "Sharp QM1D1B0004 tuner"
+config MEDIA_TUNER_XC2028
+ tristate "XCeive xc2028/xc3028 tuners"
depends on MEDIA_SUPPORT && I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
- Sharp QM1D1B0004 ISDB-S tuner driver.
+ Say Y here to include support for the xc2028/xc3028 tuners.
+
+config MEDIA_TUNER_XC4000
+ tristate "Xceive XC4000 silicon tuner"
+ depends on MEDIA_SUPPORT && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A driver for the silicon tuner XC4000 from Xceive.
+ This device is only used inside a SiP called together with a
+ demodulator for now.
+
+config MEDIA_TUNER_XC5000
+ tristate "Xceive XC5000 silicon tuner"
+ depends on MEDIA_SUPPORT && I2C
+ default m if !MEDIA_SUBDRV_AUTOSELECT
+ help
+ A driver for the silicon tuner XC5000 from Xceive.
+ This device is only used inside a SiP called together with a
+ demodulator for now.
+
endmenu
diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
index f97153df3c84..8de08704f8e4 100644
--- a/drivers/media/usb/Kconfig
+++ b/drivers/media/usb/Kconfig
@@ -12,53 +12,64 @@ if MEDIA_USB_SUPPORT
if MEDIA_CAMERA_SUPPORT
comment "Webcam devices"
-source "drivers/media/usb/uvc/Kconfig"
+
+source "drivers/media/usb/cpia2/Kconfig"
source "drivers/media/usb/gspca/Kconfig"
source "drivers/media/usb/pwc/Kconfig"
-source "drivers/media/usb/cpia2/Kconfig"
-source "drivers/media/usb/zr364xx/Kconfig"
-source "drivers/media/usb/stkwebcam/Kconfig"
source "drivers/media/usb/s2255/Kconfig"
+source "drivers/media/usb/stkwebcam/Kconfig"
source "drivers/media/usb/usbtv/Kconfig"
+source "drivers/media/usb/uvc/Kconfig"
+source "drivers/media/usb/zr364xx/Kconfig"
+
endif
if MEDIA_ANALOG_TV_SUPPORT
comment "Analog TV USB devices"
-source "drivers/media/usb/pvrusb2/Kconfig"
+
+source "drivers/media/usb/go7007/Kconfig"
source "drivers/media/usb/hdpvr/Kconfig"
+source "drivers/media/usb/pvrusb2/Kconfig"
source "drivers/media/usb/stk1160/Kconfig"
-source "drivers/media/usb/go7007/Kconfig"
+
endif
if (MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
comment "Analog/digital TV USB devices"
+
source "drivers/media/usb/au0828/Kconfig"
source "drivers/media/usb/cx231xx/Kconfig"
source "drivers/media/usb/tm6000/Kconfig"
-endif
+endif
if I2C && MEDIA_DIGITAL_TV_SUPPORT
comment "Digital TV USB devices"
-source "drivers/media/usb/dvb-usb/Kconfig"
+
+source "drivers/media/usb/as102/Kconfig"
+source "drivers/media/usb/b2c2/Kconfig"
source "drivers/media/usb/dvb-usb-v2/Kconfig"
+source "drivers/media/usb/dvb-usb/Kconfig"
+source "drivers/media/usb/siano/Kconfig"
source "drivers/media/usb/ttusb-budget/Kconfig"
source "drivers/media/usb/ttusb-dec/Kconfig"
-source "drivers/media/usb/siano/Kconfig"
-source "drivers/media/usb/b2c2/Kconfig"
-source "drivers/media/usb/as102/Kconfig"
+
endif
if (MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT)
comment "Webcam, TV (analog/digital) USB devices"
+
source "drivers/media/usb/em28xx/Kconfig"
+
endif
if MEDIA_SDR_SUPPORT
comment "Software defined radio USB devices"
+
source "drivers/media/usb/airspy/Kconfig"
source "drivers/media/usb/hackrf/Kconfig"
source "drivers/media/usb/msi2500/Kconfig"
+
endif
endif #MEDIA_USB_SUPPORT
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index a4600a97d1fd..4eadc9539b4c 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -14,6 +14,8 @@ config DVB_USB_V2
Say Y if you own a USB DVB device.
+if DVB_USB_V2
+
config DVB_USB_AF9015
tristate "Afatech AF9015 DVB-T USB2.0 support"
depends on DVB_USB_V2 && I2C_MUX
@@ -87,6 +89,17 @@ config DVB_USB_CE6230
help
Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
+config DVB_USB_DVBSKY
+ tristate "DVBSky USB support"
+ depends on DVB_USB_V2
+ select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SP2 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the USB receivers from DVBSky.
+
config DVB_USB_EC168
tristate "E3C EC168 DVB-T USB2.0 support"
depends on DVB_USB_V2
@@ -154,17 +167,6 @@ config DVB_USB_RTL28XXU
help
Say Y here to support the Realtek RTL28xxU DVB USB receiver.
-config DVB_USB_DVBSKY
- tristate "DVBSky USB support"
- depends on DVB_USB_V2
- select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_SP2 if MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y here to support the USB receivers from DVBSky.
-
config DVB_USB_ZD1301
tristate "ZyDAS ZD1301"
depends on DVB_USB_V2
@@ -172,3 +174,5 @@ config DVB_USB_ZD1301
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the ZyDAS ZD1301 DVB USB receiver.
+
+endif
diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig
index 6df96c2bf569..f10fe27e2a4d 100644
--- a/drivers/media/usb/dvb-usb/Kconfig
+++ b/drivers/media/usb/dvb-usb/Kconfig
@@ -22,15 +22,7 @@ config DVB_USB_DEBUG
Say Y if you want to enable debugging. See modinfo dvb-usb (and the
appropriate drivers) for debug levels.
-config DVB_USB_DIB3000MC
- tristate
- depends on DVB_USB
- select DVB_DIB3000MC
- help
- This is a module with helper functions for accessing the
- DIB3000MC from USB DVB devices. It must be a separate module
- in case DVB_USB is built-in and DVB_DIB3000MC is a module,
- and gets selected automatically when needed.
+if DVB_USB
config DVB_USB_A800
tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
@@ -41,84 +33,37 @@ config DVB_USB_A800
help
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
-config DVB_USB_DIBUSB_MB
- tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
+config DVB_USB_AF9005
+ tristate "Afatech AF9005 DVB-T USB1.1 support"
depends on DVB_USB
- select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
- select DVB_DIB3000MB
- depends on DVB_DIB3000MC || !DVB_DIB3000MC
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
help
- Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
- DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
-
- For an up-to-date list of devices supported by this driver, have a look
- on the Linux-DVB Wiki at www.linuxtv.org.
-
- Say Y if you own such a device and want to use it. You should build it as
- a module.
+ Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
+ and the TerraTec Cinergy T USB XE (Rev.1)
-config DVB_USB_DIBUSB_MB_FAULTY
- bool "Support faulty USB IDs"
- depends on DVB_USB_DIBUSB_MB
+config DVB_USB_AF9005_REMOTE
+ tristate "Afatech AF9005 default remote control support"
+ depends on DVB_USB_AF9005
help
- Support for faulty USB IDs due to an invalid EEPROM on some Artec devices.
+ Say Y here to support the default remote control decoding for the
+ Afatech AF9005 based receiver.
-config DVB_USB_DIBUSB_MC
- tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
+config DVB_USB_AZ6027
+ tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
depends on DVB_USB
- select DVB_USB_DIB3000MC
- select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
help
- Support for USB2.0 DVB-T receivers based on reference designs made by
- DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
-
- For an up-to-date list of devices supported by this driver, have a look
- on the Linux-DVB Wiki at www.linuxtv.org.
-
- Say Y if you own such a device and want to use it. You should build it as
- a module.
+ Say Y here to support the AZ6027 device
-config DVB_USB_DIB0700
- tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
+config DVB_USB_CINERGY_T2
+ tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
depends on DVB_USB
- select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
- select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT
- select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_USB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT
- select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_TDA18250 if MEDIA_SUBDRV_AUTOSELECT
help
- Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
- USB bridge is also present in devices having the DiB7700 DVB-T-USB
- silicon. This chip can be found in devices offered by Hauppauge,
- Avermedia and other big and small companies.
-
- For an up-to-date list of devices supported by this driver, have a look
- on the LinuxTV Wiki at www.linuxtv.org.
-
- Say Y if you own such a device and want to use it. You should build it as
- a module.
+ Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
-config DVB_USB_UMT_010
- tristate "HanfTek UMT-010 DVB-T USB2.0 support"
- depends on DVB_USB
- select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
- select DVB_USB_DIB3000MC
- select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
+ Say Y if you own such a device and want to use it.
config DVB_USB_CXUSB
tristate "Conexant USB2.0 hybrid reference design support"
@@ -159,87 +104,93 @@ config DVB_USB_CXUSB_ANALOG
USB2.0 hybrid reference design.
Currently this mode is supported only on a Medion MD95700 device.
-config DVB_USB_M920X
- tristate "Uli m920x DVB-T USB2.0 support"
+config DVB_USB_DIB0700
+ tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
depends on DVB_USB
- select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_DIB7000P if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_DIB7000M if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_DIB8000 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_USB_DIB3000MC if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TUNER_DIB0090 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MT2266 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_XC4000 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA18250 if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
- Currently, only devices with a product id of
- "DTV USB MINI" (in cold state) are supported.
- Firmware required.
+ Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
+ USB bridge is also present in devices having the DiB7700 DVB-T-USB
+ silicon. This chip can be found in devices offered by Hauppauge,
+ Avermedia and other big and small companies.
-config DVB_USB_DIGITV
- tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
- depends on DVB_USB
- select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
- select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
+ For an up-to-date list of devices supported by this driver, have a look
+ on the LinuxTV Wiki at www.linuxtv.org.
-config DVB_USB_VP7045
- tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support"
+ Say Y if you own such a device and want to use it. You should build it as
+ a module.
+
+config DVB_USB_DIB3000MC
+ tristate
depends on DVB_USB
+ select DVB_DIB3000MC
help
- Say Y here to support the
-
- TwinhanDTV Alpha (stick) (VP-7045),
- TwinhanDTV MagicBox II (VP-7046),
- DigitalNow TinyUSB 2 DVB-t,
- DigitalRise USB 2.0 Ter (Beetle) and
- TYPHOON DVB-T USB DRIVE
-
- DVB-T USB2.0 receivers.
+ This is a module with helper functions for accessing the
+ DIB3000MC from USB DVB devices. It must be a separate module
+ in case DVB_USB is built-in and DVB_DIB3000MC is a module,
+ and gets selected automatically when needed.
-config DVB_USB_VP702X
- tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support"
+config DVB_USB_DIBUSB_MB
+ tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
depends on DVB_USB
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_DIB3000MB
+ depends on DVB_DIB3000MC || !DVB_DIB3000MC
+ select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the
+ Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
+ DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
- TwinhanDTV StarBox,
- DigitalRise USB Starbox and
- TYPHOON DVB-S USB 2.0 BOX
+ For an up-to-date list of devices supported by this driver, have a look
+ on the Linux-DVB Wiki at www.linuxtv.org.
- DVB-S USB2.0 receivers.
+ Say Y if you own such a device and want to use it. You should build it as
+ a module.
-config DVB_USB_GP8PSK
- tristate "GENPIX 8PSK->USB module support"
- depends on DVB_USB
+config DVB_USB_DIBUSB_MB_FAULTY
+ bool "Support faulty USB IDs"
+ depends on DVB_USB_DIBUSB_MB
help
- Say Y here to support the
- GENPIX 8psk module
-
- DVB-S USB2.0 receivers.
+ Support for faulty USB IDs due to an invalid EEPROM on some Artec devices.
-config DVB_USB_NOVA_T_USB2
- tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
+config DVB_USB_DIBUSB_MC
+ tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
depends on DVB_USB
select DVB_USB_DIB3000MC
- select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
+ Support for USB2.0 DVB-T receivers based on reference designs made by
+ DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
-config DVB_USB_TTUSB2
- tristate "Pinnacle 400e DVB-S USB2.0 support"
+ For an up-to-date list of devices supported by this driver, have a look
+ on the Linux-DVB Wiki at www.linuxtv.org.
+
+ Say Y if you own such a device and want to use it. You should build it as
+ a module.
+
+config DVB_USB_DIGITV
+ tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support"
depends on DVB_USB
- select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
- select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
- select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_NXT6000 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and
- the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The
- firmware protocol used by this module is similar to the one used by the
- old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
+ Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver.
config DVB_USB_DTT200U
tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
@@ -251,43 +202,13 @@ config DVB_USB_DTT200U
The WT-220U and its clones are pen-sized.
-config DVB_USB_OPERA1
- tristate "Opera1 DVB-S USB2.0 receiver"
- depends on DVB_USB
- select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
- help
- Say Y here to support the Opera DVB-S USB2.0 receiver.
-
-config DVB_USB_AF9005
- tristate "Afatech AF9005 DVB-T USB1.1 support"
+config DVB_USB_DTV5100
+ tristate "AME DTV-5100 USB2.0 DVB-T support"
depends on DVB_USB
- select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
- and the TerraTec Cinergy T USB XE (Rev.1)
-
-config DVB_USB_AF9005_REMOTE
- tristate "Afatech AF9005 default remote control support"
- depends on DVB_USB_AF9005
- help
- Say Y here to support the default remote control decoding for the
- Afatech AF9005 based receiver.
-
-config DVB_USB_PCTV452E
- tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600"
- depends on DVB_USB
- select TTPCI_EEPROM
- select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
- select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
- help
- Support for external USB adapter designed by Pinnacle,
- shipped under the brand name 'PCTV HDTV Pro USB'.
- Also supports TT Connect S2-3600/3650 cards.
- Say Y if you own such a device and want to use it.
+ Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
config DVB_USB_DW2102
tristate "DvbWorld & TeVii DVB-S/S2 USB2.0 support"
@@ -312,29 +233,59 @@ config DVB_USB_DW2102
Say Y here to support the DvbWorld, TeVii, Prof, TechnoTrend
DVB-S/S2 USB2.0 receivers.
-config DVB_USB_CINERGY_T2
- tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
+config DVB_USB_GP8PSK
+ tristate "GENPIX 8PSK->USB module support"
depends on DVB_USB
help
- Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
+ Say Y here to support the
+ GENPIX 8psk module
- Say Y if you own such a device and want to use it.
+ DVB-S USB2.0 receivers.
-config DVB_USB_DTV5100
- tristate "AME DTV-5100 USB2.0 DVB-T support"
+config DVB_USB_M920X
+ tristate "Uli m920x DVB-T USB2.0 support"
depends on DVB_USB
- select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA1004X if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
+ Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
+ Currently, only devices with a product id of
+ "DTV USB MINI" (in cold state) are supported.
+ Firmware required.
-config DVB_USB_AZ6027
- tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
+config DVB_USB_NOVA_T_USB2
+ tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
depends on DVB_USB
+ select DVB_USB_DIB3000MC
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
+
+config DVB_USB_OPERA1
+ tristate "Opera1 DVB-S USB2.0 receiver"
+ depends on DVB_USB
+ select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Opera DVB-S USB2.0 receiver.
+
+config DVB_USB_PCTV452E
+ tristate "Pinnacle PCTV HDTV Pro USB device/TT Connect S2-3600"
+ depends on DVB_USB
+ select TTPCI_EEPROM
+ select DVB_ISL6423 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_LNBP22 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STB0899 if MEDIA_SUBDRV_AUTOSELECT
select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
help
- Say Y here to support the AZ6027 device
+ Support for external USB adapter designed by Pinnacle,
+ shipped under the brand name 'PCTV HDTV Pro USB'.
+ Also supports TT Connect S2-3600/3650 cards.
+ Say Y if you own such a device and want to use it.
config DVB_USB_TECHNISAT_USB2
tristate "Technisat DVB-S/S2 USB2.0 support"
@@ -343,3 +294,56 @@ config DVB_USB_TECHNISAT_USB2
select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
help
Say Y here to support the Technisat USB2 DVB-S/S2 device
+
+config DVB_USB_TTUSB2
+ tristate "Pinnacle 400e DVB-S USB2.0 support"
+ depends on DVB_USB
+ select DVB_TDA10086 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA826X if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_TDA10048 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_TDA827X if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver and
+ the TechnoTrend CT-3650 CI DVB-C/T USB2.0 receiver. The
+ firmware protocol used by this module is similar to the one used by the
+ old ttusb-driver - that's why the module is called dvb-usb-ttusb2.
+
+config DVB_USB_UMT_010
+ tristate "HanfTek UMT-010 DVB-T USB2.0 support"
+ depends on DVB_USB
+ select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_USB_DIB3000MC
+ select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+ help
+ Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
+
+config DVB_USB_VP702X
+ tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support"
+ depends on DVB_USB
+ help
+ Say Y here to support the
+
+ TwinhanDTV StarBox,
+ DigitalRise USB Starbox and
+ TYPHOON DVB-S USB 2.0 BOX
+
+ DVB-S USB2.0 receivers.
+
+config DVB_USB_VP7045
+ tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support"
+ depends on DVB_USB
+ help
+ Say Y here to support the
+
+ TwinhanDTV Alpha (stick) (VP-7045),
+ TwinhanDTV MagicBox II (VP-7046),
+ DigitalNow TinyUSB 2 DVB-t,
+ DigitalRise USB 2.0 Ter (Beetle) and
+ TYPHOON DVB-T USB DRIVE
+
+ DVB-T USB2.0 receivers.
+
+endif
diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig
index 2b106a7fcf4c..9c1939ce6be4 100644
--- a/drivers/media/usb/gspca/Kconfig
+++ b/drivers/media/usb/gspca/Kconfig
@@ -16,13 +16,8 @@ menuconfig USB_GSPCA
To compile this driver as modules, choose M here: the
module will be called gspca_main.
-
if USB_GSPCA && VIDEO_DEV
-source "drivers/media/usb/gspca/m5602/Kconfig"
-source "drivers/media/usb/gspca/stv06xx/Kconfig"
-source "drivers/media/usb/gspca/gl860/Kconfig"
-
config USB_GSPCA_BENQ
tristate "Benq USB Camera Driver"
depends on VIDEO_DEV && USB_GSPCA
@@ -251,6 +246,15 @@ config USB_GSPCA_SONIXJ
To compile this driver as a module, choose M here: the
module will be called gspca_sonixj
+config USB_GSPCA_SPCA1528
+ tristate "SPCA1528 USB Camera Driver"
+ depends on VIDEO_DEV && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the SPCA1528 chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_spca1528.
+
config USB_GSPCA_SPCA500
tristate "SPCA500 USB Camera Driver"
depends on VIDEO_DEV && USB_GSPCA
@@ -305,15 +309,6 @@ config USB_GSPCA_SPCA561
To compile this driver as a module, choose M here: the
module will be called gspca_spca561.
-config USB_GSPCA_SPCA1528
- tristate "SPCA1528 USB Camera Driver"
- depends on VIDEO_DEV && USB_GSPCA
- help
- Say Y here if you want support for cameras based on the SPCA1528 chip.
-
- To compile this driver as a module, choose M here: the
- module will be called gspca_spca1528.
-
config USB_GSPCA_SQ905
tristate "SQ Technologies SQ905 based USB Camera Driver"
depends on VIDEO_DEV && USB_GSPCA
@@ -453,4 +448,8 @@ config USB_GSPCA_ZC3XX
To compile this driver as a module, choose M here: the
module will be called gspca_zc3xx.
+source "drivers/media/usb/gspca/gl860/Kconfig"
+source "drivers/media/usb/gspca/m5602/Kconfig"
+source "drivers/media/usb/gspca/stv06xx/Kconfig"
+
endif