Merge tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

1 files changed, 79 insertions, 9 deletions

diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 803e93fae56a..00e4fe2f3c75 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -19,6 +19,9 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
@@ -191,7 +194,7 @@ static const char *wm8958_main_supplies[] = {
 	"SPKVDD2",
 };
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_RUNTIME
 static int wm8994_suspend(struct device *dev)
 {
 	struct wm8994 *wm8994 = dev_get_drvdata(dev);
@@ -396,6 +399,60 @@ static const struct reg_default wm1811_reva_patch[] = {
 	{ 0x102, 0x0 },
 };
 
+#ifdef CONFIG_OF
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+	struct device_node *np = wm8994->dev->of_node;
+	struct wm8994_pdata *pdata = &wm8994->pdata;
+	int i;
+
+	if (!np)
+		return 0;
+
+	if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
+				       ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
+		for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
+			if (wm8994->pdata.gpio_defaults[i] == 0)
+				pdata->gpio_defaults[i]
+					= WM8994_CONFIGURE_GPIO;
+		}
+	}
+
+	of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
+				   ARRAY_SIZE(pdata->micbias));
+
+	pdata->lineout1_diff = true;
+	pdata->lineout2_diff = true;
+	if (of_find_property(np, "wlf,lineout1-se", NULL))
+		pdata->lineout1_diff = false;
+	if (of_find_property(np, "wlf,lineout2-se", NULL))
+		pdata->lineout2_diff = false;
+
+	if (of_find_property(np, "wlf,lineout1-feedback", NULL))
+		pdata->lineout1fb = true;
+	if (of_find_property(np, "wlf,lineout2-feedback", NULL))
+		pdata->lineout2fb = true;
+
+	if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
+		pdata->lineout2fb = true;
+
+	pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
+	if (pdata->ldo[0].enable < 0)
+		pdata->ldo[0].enable = 0;
+
+	pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
+	if (pdata->ldo[1].enable < 0)
+		pdata->ldo[1].enable = 0;
+
+	return 0;
+}
+#else
+static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
+{
+	return 0;
+}
+#endif
+
 /*
  * Instantiate the generic non-control parts of the device.
  */
@@ -405,7 +462,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	struct regmap_config *regmap_config;
 	const struct reg_default *regmap_patch = NULL;
 	const char *devname;
-	int ret, i, patch_regs;
+	int ret, i, patch_regs = 0;
 	int pulls = 0;
 
 	if (dev_get_platdata(wm8994->dev)) {
@@ -414,6 +471,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 	}
 	pdata = &wm8994->pdata;
 
+	ret = wm8994_set_pdata_from_of(wm8994);
+	if (ret != 0)
+		return ret;
+
 	dev_set_drvdata(wm8994->dev, wm8994);
 
 	/* Add the on-chip regulators first for bootstrapping */
@@ -673,9 +734,9 @@ static void wm8994_device_exit(struct wm8994 *wm8994)
 }
 
 static const struct of_device_id wm8994_of_match[] = {
-	{ .compatible = "wlf,wm1811", },
-	{ .compatible = "wlf,wm8994", },
-	{ .compatible = "wlf,wm8958", },
+	{ .compatible = "wlf,wm1811", .data = (void *)WM1811 },
+	{ .compatible = "wlf,wm8994", .data = (void *)WM8994 },
+	{ .compatible = "wlf,wm8958", .data = (void *)WM8958 },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, wm8994_of_match);
@@ -683,6 +744,7 @@ MODULE_DEVICE_TABLE(of, wm8994_of_match);
 static int wm8994_i2c_probe(struct i2c_client *i2c,
 				      const struct i2c_device_id *id)
 {
+	const struct of_device_id *of_id;
 	struct wm8994 *wm8994;
 	int ret;
 
@@ -693,7 +755,14 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
 	i2c_set_clientdata(i2c, wm8994);
 	wm8994->dev = &i2c->dev;
 	wm8994->irq = i2c->irq;
-	wm8994->type = id->driver_data;
+
+	if (i2c->dev.of_node) {
+		of_id = of_match_device(wm8994_of_match, &i2c->dev);
+		if (of_id)
+			wm8994->type = (int)of_id->data;
+	} else {
+		wm8994->type = id->driver_data;
+	}
 
 	wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
 	if (IS_ERR(wm8994->regmap)) {
@@ -724,15 +793,16 @@ static const struct i2c_device_id wm8994_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
 
-static UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume,
-			    NULL);
+static const struct dev_pm_ops wm8994_pm_ops = {
+	SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
+};
 
 static struct i2c_driver wm8994_i2c_driver = {
 	.driver = {
 		.name = "wm8994",
 		.owner = THIS_MODULE,
 		.pm = &wm8994_pm_ops,
-		.of_match_table = wm8994_of_match,
+		.of_match_table = of_match_ptr(wm8994_of_match),
 	},
 	.probe = wm8994_i2c_probe,
 	.remove = wm8994_i2c_remove,