summaryrefslogtreecommitdiff
path: root/drivers/misc/bmp085.c
diff options
context:
space:
mode:
authorEric Andersson <eric.andersson@unixphere.com>2012-04-09 22:16:17 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-04-18 14:57:14 -0700
commit985087dbcb0265f46e8651fdc7e974f8a7184423 (patch)
treeaad96003f89022623f4c8bf940267300530a9eb2 /drivers/misc/bmp085.c
parentc5a86ab6dd6e424c56826421a80b855e24f7caa1 (diff)
misc: add support for bmp18x chips to the bmp085 driver
The bmp18x chip family comes in an I2C respectively SPI variant. Hence, the bmp085 driver was split to support both buses. Tested-by: Zhengguang Guo <zhengguang.guo@bosch-sensortec.com> Reviewed-by: Stefan Nilsson <stefan.nilsson@unixphere.com> Signed-off-by: Eric Andersson <eric.andersson@unixphere.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/misc/bmp085.c')
-rw-r--r--drivers/misc/bmp085.c163
1 files changed, 67 insertions, 96 deletions
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index 6adde9e1a0d1..62e418293b7e 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -2,10 +2,11 @@
* Copyright (c) 2012 Bosch Sensortec GmbH
* Copyright (c) 2012 Unixphere AB
*
- * This driver supports the bmp085 digital barometric pressure
- * and temperature sensor from Bosch Sensortec. The datasheet
- * is available from their website:
+ * This driver supports the bmp085 and bmp18x digital barometric pressure
+ * and temperature sensors from Bosch Sensortec. The datasheets
+ * are available from their website:
* http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
+ * http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
*
* A pressure measurement is issued by reading from pressure0_input.
* The return value ranges from 30000 to 110000 pascal with a resulution
@@ -47,15 +48,12 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/init.h>
-#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/of.h>
+#include "bmp085.h"
-#define BMP085_NAME "bmp085"
-#define BMP085_I2C_ADDRESS 0x77
#define BMP085_CHIP_ID 0x55
-
#define BMP085_CALIBRATION_DATA_START 0xAA
#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */
#define BMP085_CHIP_ID_REG 0xD0
@@ -67,9 +65,6 @@
#define BMP085_CONVERSION_REGISTER_XLSB 0xF8
#define BMP085_TEMP_CONVERSION_TIME 5
-static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS,
- I2C_CLIENT_END };
-
struct bmp085_calibration_data {
s16 AC1, AC2, AC3;
u16 AC4, AC5, AC6;
@@ -78,7 +73,8 @@ struct bmp085_calibration_data {
};
struct bmp085_data {
- struct i2c_client *client;
+ struct device *dev;
+ struct regmap *regmap;
struct mutex lock;
struct bmp085_calibration_data calibration;
u8 oversampling_setting;
@@ -90,21 +86,16 @@ struct bmp085_data {
s32 b6; /* calculated temperature correction coefficient */
};
-static s32 bmp085_read_calibration_data(struct i2c_client *client)
+static s32 bmp085_read_calibration_data(struct bmp085_data *data)
{
u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
- struct bmp085_data *data = i2c_get_clientdata(client);
struct bmp085_calibration_data *cali = &(data->calibration);
- s32 status = i2c_smbus_read_i2c_block_data(client,
- BMP085_CALIBRATION_DATA_START,
- (BMP085_CALIBRATION_DATA_LENGTH << 1),
- (u8 *)tmp);
+ s32 status = regmap_bulk_read(data->regmap,
+ BMP085_CALIBRATION_DATA_START, (u8 *)tmp,
+ (BMP085_CALIBRATION_DATA_LENGTH << 1));
if (status < 0)
return status;
- if (status != (BMP085_CALIBRATION_DATA_LENGTH << 1))
- return -EIO;
-
cali->AC1 = be16_to_cpu(tmp[0]);
cali->AC2 = be16_to_cpu(tmp[1]);
cali->AC3 = be16_to_cpu(tmp[2]);
@@ -125,23 +116,20 @@ static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
s32 status;
mutex_lock(&data->lock);
- status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
- BMP085_TEMP_MEASUREMENT);
+ status = regmap_write(data->regmap, BMP085_CTRL_REG,
+ BMP085_TEMP_MEASUREMENT);
if (status < 0) {
- dev_err(&data->client->dev,
+ dev_err(data->dev,
"Error while requesting temperature measurement.\n");
goto exit;
}
msleep(BMP085_TEMP_CONVERSION_TIME);
- status = i2c_smbus_read_i2c_block_data(data->client,
- BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp);
- if (status < 0)
- goto exit;
- if (status != sizeof(tmp)) {
- dev_err(&data->client->dev,
+ status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+ &tmp, sizeof(tmp));
+ if (status < 0) {
+ dev_err(data->dev,
"Error while reading temperature measurement result\n");
- status = -EIO;
goto exit;
}
data->raw_temperature = be16_to_cpu(tmp);
@@ -159,11 +147,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
s32 status;
mutex_lock(&data->lock);
- status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG,
+ status = regmap_write(data->regmap, BMP085_CTRL_REG,
BMP085_PRESSURE_MEASUREMENT +
(data->oversampling_setting << 6));
if (status < 0) {
- dev_err(&data->client->dev,
+ dev_err(data->dev,
"Error while requesting pressure measurement.\n");
goto exit;
}
@@ -172,14 +160,11 @@ static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
msleep(2+(3 << data->oversampling_setting));
/* copy data into a u32 (4 bytes), but skip the first byte. */
- status = i2c_smbus_read_i2c_block_data(data->client,
- BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1);
- if (status < 0)
- goto exit;
- if (status != 3) {
- dev_err(&data->client->dev,
+ status = regmap_bulk_read(data->regmap, BMP085_CONVERSION_REGISTER_MSB,
+ ((u8 *)&tmp)+1, 3);
+ if (status < 0) {
+ dev_err(data->dev,
"Error while reading pressure measurement results\n");
- status = -EIO;
goto exit;
}
data->raw_pressure = be32_to_cpu((tmp));
@@ -304,8 +289,7 @@ static ssize_t set_oversampling(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
unsigned long oversampling;
int err = kstrtoul(buf, 10, &oversampling);
@@ -322,8 +306,7 @@ static ssize_t set_oversampling(struct device *dev,
static ssize_t show_oversampling(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
}
@@ -336,8 +319,7 @@ static ssize_t show_temperature(struct device *dev,
{
int temperature;
int status;
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
status = bmp085_get_temperature(data, &temperature);
if (status < 0)
@@ -353,8 +335,7 @@ static ssize_t show_pressure(struct device *dev,
{
int pressure;
int status;
- struct i2c_client *client = to_i2c_client(dev);
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
status = bmp085_get_pressure(data, &pressure);
if (status < 0)
@@ -376,22 +357,27 @@ static const struct attribute_group bmp085_attr_group = {
.attrs = bmp085_attributes,
};
-static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info)
+int bmp085_detect(struct device *dev)
{
- if (client->addr != BMP085_I2C_ADDRESS)
- return -ENODEV;
+ struct bmp085_data *data = dev_get_drvdata(dev);
+ unsigned int id;
+ int ret;
+
+ ret = regmap_read(data->regmap, BMP085_CHIP_ID_REG, &id);
+ if (ret < 0)
+ return ret;
- if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID)
+ if (id != data->chip_id)
return -ENODEV;
return 0;
}
+EXPORT_SYMBOL_GPL(bmp085_detect);
-static void __init bmp085_get_of_properties(struct i2c_client *client,
- struct bmp085_data *data)
+static void __init bmp085_get_of_properties(struct bmp085_data *data)
{
#ifdef CONFIG_OF
- struct device_node *np = client->dev.of_node;
+ struct device_node *np = data->dev->of_node;
u32 prop;
if (!np)
@@ -408,30 +394,33 @@ static void __init bmp085_get_of_properties(struct i2c_client *client,
#endif
}
-static int bmp085_init_client(struct i2c_client *client)
+static int bmp085_init_client(struct bmp085_data *data)
{
- struct bmp085_data *data = i2c_get_clientdata(client);
- int status = bmp085_read_calibration_data(client);
+ int status = bmp085_read_calibration_data(data);
if (status < 0)
return status;
/* default settings */
- data->client = client;
data->chip_id = BMP085_CHIP_ID;
data->last_temp_measurement = 0;
data->temp_measurement_period = 1*HZ;
data->oversampling_setting = 3;
- bmp085_get_of_properties(client, data);
+ bmp085_get_of_properties(data);
mutex_init(&data->lock);
return 0;
}
-static int __devinit bmp085_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+struct regmap_config bmp085_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8
+};
+EXPORT_SYMBOL_GPL(bmp085_regmap_config);
+
+__devinit int bmp085_probe(struct device *dev, struct regmap *regmap)
{
struct bmp085_data *data;
int err = 0;
@@ -442,19 +431,27 @@ static int __devinit bmp085_probe(struct i2c_client *client,
goto exit;
}
- i2c_set_clientdata(client, data);
+ dev_set_drvdata(dev, data);
+ data->dev = dev;
+ data->regmap = regmap;
/* Initialize the BMP085 chip */
- err = bmp085_init_client(client);
+ err = bmp085_init_client(data);
if (err < 0)
goto exit_free;
+ err = bmp085_detect(dev);
+ if (err < 0) {
+ dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME);
+ goto exit_free;
+ }
+
/* Register sysfs hooks */
- err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group);
+ err = sysfs_create_group(&dev->kobj, &bmp085_attr_group);
if (err)
goto exit_free;
- dev_info(&client->dev, "Successfully initialized %s!\n", BMP085_NAME);
+ dev_info(dev, "Successfully initialized %s!\n", BMP085_NAME);
return 0;
@@ -463,44 +460,18 @@ exit_free:
exit:
return err;
}
+EXPORT_SYMBOL_GPL(bmp085_probe);
-static int __devexit bmp085_remove(struct i2c_client *client)
+int bmp085_remove(struct device *dev)
{
- struct bmp085_data *data = i2c_get_clientdata(client);
+ struct bmp085_data *data = dev_get_drvdata(dev);
- sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group);
+ sysfs_remove_group(&data->dev->kobj, &bmp085_attr_group);
kfree(data);
return 0;
}
-
-static const struct of_device_id bmp085_of_match[] = {
- { .compatible = "bosch,bmp085", },
- { },
-};
-MODULE_DEVICE_TABLE(of, bmp085_of_match);
-
-static const struct i2c_device_id bmp085_id[] = {
- { BMP085_NAME, 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, bmp085_id);
-
-static struct i2c_driver bmp085_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = BMP085_NAME,
- .of_match_table = bmp085_of_match
- },
- .id_table = bmp085_id,
- .probe = bmp085_probe,
- .remove = __devexit_p(bmp085_remove),
-
- .detect = bmp085_detect,
- .address_list = normal_i2c
-};
-
-module_i2c_driver(bmp085_driver);
+EXPORT_SYMBOL_GPL(bmp085_remove);
MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com>");
MODULE_DESCRIPTION("BMP085 driver");