diff options
| author | Sakari Ailus <sakari.ailus@linux.intel.com> | 2021-10-18 15:17:29 +0300 |
|---|---|---|
| committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2021-11-03 19:03:55 +0100 |
| commit | 1e96078e0ae456cda0e02afd42b9a2b3734f45ba (patch) | |
| tree | fdaf9e99e24d6079bdd1d529347f52936a6c0f4e /drivers/misc | |
| parent | 434aa74bd770bc1a712c8431919eabe490dbe707 (diff) | |
at24: Support probing while in non-zero ACPI D state
In certain use cases (where the chip is part of a camera module, and the
camera module is wired together with a camera privacy LED), powering on
the device during probe is undesirable. Add support for the at24 to
execute probe while being in ACPI D state other than 0 (which means fully
powered on).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/misc')
| -rw-r--r-- | drivers/misc/eeprom/at24.c | 45 |
1 files changed, 27 insertions, 18 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 305ffad131a2..49ab656e8a96 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -595,6 +595,7 @@ static int at24_probe(struct i2c_client *client) bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; struct at24_data *at24; + bool full_power; struct regmap *regmap; bool writable; u8 test_byte; @@ -747,14 +748,16 @@ static int at24_probe(struct i2c_client *client) i2c_set_clientdata(client, at24); - err = regulator_enable(at24->vcc_reg); - if (err) { - dev_err(dev, "Failed to enable vcc regulator\n"); - return err; - } + full_power = acpi_dev_state_d0(&client->dev); + if (full_power) { + err = regulator_enable(at24->vcc_reg); + if (err) { + dev_err(dev, "Failed to enable vcc regulator\n"); + return err; + } - /* enable runtime pm */ - pm_runtime_set_active(dev); + pm_runtime_set_active(dev); + } pm_runtime_enable(dev); at24->nvmem = devm_nvmem_register(dev, &nvmem_config); @@ -766,15 +769,18 @@ static int at24_probe(struct i2c_client *client) } /* - * Perform a one-byte test read to verify that the - * chip is functional. + * Perform a one-byte test read to verify that the chip is functional, + * unless powering on the device is to be avoided during probe (i.e. + * it's powered off right now). */ - err = at24_read(at24, 0, &test_byte, 1); - if (err) { - pm_runtime_disable(dev); - if (!pm_runtime_status_suspended(dev)) - regulator_disable(at24->vcc_reg); - return -ENODEV; + if (full_power) { + err = at24_read(at24, 0, &test_byte, 1); + if (err) { + pm_runtime_disable(dev); + if (!pm_runtime_status_suspended(dev)) + regulator_disable(at24->vcc_reg); + return -ENODEV; + } } pm_runtime_idle(dev); @@ -794,9 +800,11 @@ static int at24_remove(struct i2c_client *client) struct at24_data *at24 = i2c_get_clientdata(client); pm_runtime_disable(&client->dev); - if (!pm_runtime_status_suspended(&client->dev)) - regulator_disable(at24->vcc_reg); - pm_runtime_set_suspended(&client->dev); + if (acpi_dev_state_d0(&client->dev)) { + if (!pm_runtime_status_suspended(&client->dev)) + regulator_disable(at24->vcc_reg); + pm_runtime_set_suspended(&client->dev); + } return 0; } @@ -833,6 +841,7 @@ static struct i2c_driver at24_driver = { .probe_new = at24_probe, .remove = at24_remove, .id_table = at24_ids, + .flags = I2C_DRV_ACPI_WAIVE_D0_PROBE, }; static int __init at24_init(void) |