Merge tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support for host software queue for (e)MMC/SD
   - Throttle polling rate for CMD6
   - Update CMD13 busy condition check for CMD6 commands
   - Improve busy detect polling for erase/trim/discard/HPI
   - Fixup support for HW busy detection for HPI commands
   - Re-work and improve support for eMMC sanitize commands

  MMC host:
   - mmci:
       * Add support for sdmmc variant revision 2.0
   - mmci_sdmmc:
       * Improve support for busyend detection
       * Fixup support for signal voltage switch
       * Add support for tuning with delay block
   - mtk-sd:
       * Fix another SDIO irq issue
   - sdhci:
       * Disable native card detect when GPIO based type exist
   - sdhci:
       * Add option to defer request completion
   - sdhci_am654:
       * Add support to set a tap value per speed mode
   - sdhci-esdhc-imx:
       * Add support for i.MX8MM based variant
       * Fixup support for standard tuning on i.MX8 usdhc
       * Optimize for strobe/clock dll settings
       * Fixup support for system and runtime suspend/resume
   - sdhci-iproc:
       * Update regulator/bus-voltage management for bcm2711
   - sdhci-msm:
       * Prevent clock gating with PWRSAVE_DLL on broken variants
       * Fix management of CQE during SDHCI reset
   - sdhci-of-arasan:
       * Add support for auto tuning on ZynqMP based platforms
   - sdhci-omap:
       * Add support for system suspend/resume
   - sdhci-sprd:
       * Add support for HW busy detection
       * Enable support host software queue
   - sdhci-tegra:
       * Add support for HW busy detection
   - tmio/renesas_sdhi:
       * Enforce retune after runtime suspend
   - renesas_sdhi:
       * Use manual tap correction for HS400 on some variants
       * Add support for manual correction of tap values for tunings"

* tag 'mmc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: cavium-octeon: remove nonsense variable coercion
  mmc: mediatek: fix SDIO irq issue
  mmc: mmci_sdmmc: Fix clear busyd0end irq flag
  dt-bindings: mmc: Fix node name in an example
  mmc: core: Re-work the code for eMMC sanitize
  mmc: sdhci: use FIELD_GET for preset value bit masks
  mmc: sdhci-of-at91: Display clock changes for debug purpose only
  mmc: sdhci: iproc: Add custom set_power() callback for bcm2711
  mmc: sdhci: am654: Use sdhci_set_power_and_voltage()
  mmc: sdhci: at91: Use sdhci_set_power_and_voltage()
  mmc: sdhci: milbeaut: Use sdhci_set_power_and_voltage()
  mmc: sdhci: arasan: Use sdhci_set_power_and_voltage()
  mmc: sdhci: Introduce sdhci_set_power_and_bus_voltage()
  mmc: vub300: Use scnprintf() for avoiding potential buffer overflow
  dt-bindings: mmc: synopsys-dw-mshc: fix clock-freq-min-max in example
  sdhci: tegra: Enable MMC_CAP_WAIT_WHILE_BUSY host capability
  sdhci: tegra: Implement Tegra specific set_timeout callback
  mmc: sdhci-omap: Add Support for Suspend/Resume
  mmc: renesas_sdhi: simplify execute_tuning
  mmc: renesas_sdhi: Use BITS_PER_LONG helper
  ...

1 files changed, 2 insertions, 52 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index a971c4bcc442..4c5de6d37ac7 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -403,23 +403,6 @@ void mmc_wait_for_req_done(struct mmc_host *host, struct mmc_request *mrq)
 
 		cmd = mrq->cmd;
 
-		/*
-		 * If host has timed out waiting for the sanitize
-		 * to complete, card might be still in programming state
-		 * so let's try to bring the card out of programming
-		 * state.
-		 */
-		if (cmd->sanitize_busy && cmd->error == -ETIMEDOUT) {
-			if (!mmc_interrupt_hpi(host->card)) {
-				pr_warn("%s: %s: Interrupted sanitize\n",
-					mmc_hostname(host), __func__);
-				cmd->error = 0;
-				break;
-			} else {
-				pr_err("%s: %s: Failed to interrupt sanitize\n",
-				       mmc_hostname(host), __func__);
-			}
-		}
 		if (!cmd->error || !cmd->retries ||
 		    mmc_card_removed(host->card))
 			break;
@@ -1658,8 +1641,6 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
 	struct mmc_command cmd = {};
 	unsigned int qty = 0, busy_timeout = 0;
 	bool use_r1b_resp = false;
-	unsigned long timeout;
-	int loop_udelay=64, udelay_max=32768;
 	int err;
 
 	mmc_retune_hold(card->host);
@@ -1763,38 +1744,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
 	if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
 		goto out;
 
-	timeout = jiffies + msecs_to_jiffies(busy_timeout);
-	do {
-		memset(&cmd, 0, sizeof(struct mmc_command));
-		cmd.opcode = MMC_SEND_STATUS;
-		cmd.arg = card->rca << 16;
-		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
-		/* Do not retry else we can't see errors */
-		err = mmc_wait_for_cmd(card->host, &cmd, 0);
-		if (err || R1_STATUS(cmd.resp[0])) {
-			pr_err("error %d requesting status %#x\n",
-				err, cmd.resp[0]);
-			err = -EIO;
-			goto out;
-		}
-
-		/* Timeout if the device never becomes ready for data and
-		 * never leaves the program state.
-		 */
-		if (time_after(jiffies, timeout)) {
-			pr_err("%s: Card stuck in programming state! %s\n",
-				mmc_hostname(card->host), __func__);
-			err =  -EIO;
-			goto out;
-		}
-		if ((cmd.resp[0] & R1_READY_FOR_DATA) &&
-		    R1_CURRENT_STATE(cmd.resp[0]) != R1_STATE_PRG)
-			break;
-
-		usleep_range(loop_udelay, loop_udelay*2);
-		if (loop_udelay < udelay_max)
-			loop_udelay *= 2;
-	} while (1);
+	/* Let's poll to find out when the erase operation completes. */
+	err = mmc_poll_for_busy(card, busy_timeout, MMC_BUSY_ERASE);
 
 out:
 	mmc_retune_release(card->host);
@@ -1957,7 +1908,6 @@ int mmc_can_sanitize(struct mmc_card *card)
 		return 1;
 	return 0;
 }
-EXPORT_SYMBOL(mmc_can_sanitize);
 
 int mmc_can_secure_erase_trim(struct mmc_card *card)
 {