mmc: dw_mmc: remove the prepare_command hook

This patch removes the prepare_command hook from entire dw_mmc driver.
Now, almost all SoCs are using by default, except Exynos.
It seems that dwmmc controller is using unnecessary hook.
To know whether needs to set this bit or not,
add the DW_MMC_CARD_NO_USE_HOLD bit.

If some SoCs need to disable this in future, just set the
DW_MMC_CARD_NO_USE_HOLD bit.
set_bit(DW_MMC_CARD_NO_USE_HOLD, &slot->flags),

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

1 files changed, 10 insertions, 21 deletions

diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 3a7e835a0033..8790f2afc057 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -145,6 +145,16 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
 		mci_writel(host, CLKSEL64, clksel);
 	else
 		mci_writel(host, CLKSEL, clksel);
+
+	/*
+	 * Exynos4412 and Exynos5250 extends the use of CMD register with the
+	 * use of bit 29 (which is reserved on standard MSHC controllers) for
+	 * optionally bypassing the HOLD register for command and data. The
+	 * HOLD register should be bypassed in case there is no phase shift
+	 * applied on CMD/DATA that is sent to the card.
+	 */
+	if (!SDMMC_CLKSEL_GET_DRV_WD3(clksel))
+		set_bit(DW_MMC_CARD_NO_USE_HOLD, &host->cur_slot->flags);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -202,26 +212,6 @@ static int dw_mci_exynos_resume_noirq(struct device *dev)
 #define dw_mci_exynos_resume_noirq	NULL
 #endif /* CONFIG_PM_SLEEP */
 
-static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
-{
-	struct dw_mci_exynos_priv_data *priv = host->priv;
-	/*
-	 * Exynos4412 and Exynos5250 extends the use of CMD register with the
-	 * use of bit 29 (which is reserved on standard MSHC controllers) for
-	 * optionally bypassing the HOLD register for command and data. The
-	 * HOLD register should be bypassed in case there is no phase shift
-	 * applied on CMD/DATA that is sent to the card.
-	 */
-	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
-		priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
-		if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64)))
-			*cmdr |= SDMMC_CMD_USE_HOLD_REG;
-	 } else {
-		if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
-			*cmdr |= SDMMC_CMD_USE_HOLD_REG;
-	}
-}
-
 static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
 {
 	struct dw_mci_exynos_priv_data *priv = host->priv;
@@ -500,7 +490,6 @@ static const struct dw_mci_drv_data exynos_drv_data = {
 	.caps			= exynos_dwmmc_caps,
 	.init			= dw_mci_exynos_priv_init,
 	.setup_clock		= dw_mci_exynos_setup_clock,
-	.prepare_command	= dw_mci_exynos_prepare_command,
 	.set_ios		= dw_mci_exynos_set_ios,
 	.parse_dt		= dw_mci_exynos_parse_dt,
 	.execute_tuning		= dw_mci_exynos_execute_tuning,