Merge tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.10:

  Core:
   - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping
     mmc_power_up() at boot/initialization time if it's already
     happened, for performance (faster boot time) reasons.
   - Fix a bit width test failure that resulted in old eMMC cards being
     put into 1-bit mode when 4-bit mode was available.
   - Expose fwrev/hwrev for MMCv4 parts.
   - Improve card removal logic in the case where the card's removed
     slowly; we were missing card removal events if the card retained
     contact with the slot pads for long enough to reply to a CMD13
     while being removed.

  Drivers:
   - davinci_mmc: Support using PIO instead of DMA.
   - dw_mmc: Add support for Exynos4412.
   - mxcmmc: DT support, use slot-gpio API.
   - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property
     support.
   - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
       SiRFprimaII: unicore ARM Cortex-A9
       SiRFatlas6: unicore ARM Cortex-A9
       SiRFmarco: dual core ARM Cortex-A9 SMP
   - sdhci-tegra: Add support for Tegra114 platforms, use
     mmc_of_parse()"

* tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits)
  mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE
  mmc: core: fix init controller performance regression, updated patch
  mmc: mxcmmc: enable DMA support on mpc512x
  mmc: mxcmmc: constify mxcmci_devtype
  mmc: mxcmmc: use slot-gpio API for write-protect detection
  mmc: mxcmmc: add mpc512x SDHC support
  mmc: mxcmmc: fix race conditions for host->req and host->data access
  mmc: mxcmmc: DT support
  mmc: dw_mmc: let device core setup the default pin configuration
  mmc: mxs-mmc: add broken-cd property
  mmc: mxs-mmc: add non-removable property
  mmc: mxs-mmc: add cd-inverted property
  mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
  mmc: mxcmmc: Fix bug when card is present during boot
  mmc: core: fix performance regression initializing MMC host controllers
  Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully"
  mmc: atmel-mci: pio hang on block errors
  mmc: core: Fix bit width test failing on old eMMC cards
  mmc: dw_mmc: Use pr_info instead of printk
  mmc: dw_mmc: Check return value of regulator_enable
  ...

1 files changed, 38 insertions, 1 deletions

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 51bbba486f38..2ea429c27714 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1581,6 +1581,37 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	sdhci_runtime_pm_put(host);
 }
 
+static int sdhci_do_get_cd(struct sdhci_host *host)
+{
+	int gpio_cd = mmc_gpio_get_cd(host->mmc);
+
+	if (host->flags & SDHCI_DEVICE_DEAD)
+		return 0;
+
+	/* If polling/nonremovable, assume that the card is always present. */
+	if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) ||
+	    (host->mmc->caps & MMC_CAP_NONREMOVABLE))
+		return 1;
+
+	/* Try slot gpio detect */
+	if (!IS_ERR_VALUE(gpio_cd))
+		return !!gpio_cd;
+
+	/* Host native card detect */
+	return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
+}
+
+static int sdhci_get_cd(struct mmc_host *mmc)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	int ret;
+
+	sdhci_runtime_pm_get(host);
+	ret = sdhci_do_get_cd(host);
+	sdhci_runtime_pm_put(host);
+	return ret;
+}
+
 static int sdhci_check_ro(struct sdhci_host *host)
 {
 	unsigned long flags;
@@ -2038,6 +2069,7 @@ static void sdhci_card_event(struct mmc_host *mmc)
 static const struct mmc_host_ops sdhci_ops = {
 	.request	= sdhci_request,
 	.set_ios	= sdhci_set_ios,
+	.get_cd		= sdhci_get_cd,
 	.get_ro		= sdhci_get_ro,
 	.hw_reset	= sdhci_hw_reset,
 	.enable_sdio_irq = sdhci_enable_sdio_irq,
@@ -2907,12 +2939,17 @@ int sdhci_add_host(struct sdhci_host *host)
 			host->vqmmc = NULL;
 		}
 	} else {
-		regulator_enable(host->vqmmc);
+		ret = regulator_enable(host->vqmmc);
 		if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
 			1950000))
 			caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
 					SDHCI_SUPPORT_SDR50 |
 					SDHCI_SUPPORT_DDR50);
+		if (ret) {
+			pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
+				mmc_hostname(mmc), ret);
+			host->vqmmc = NULL;
+		}
 	}
 
 	if (host->quirks2 & SDHCI_QUIRK2_NO_1_8_V)